Ideas to improve the selection of NHMRC Project Grants

The starting point for this presentation is that applicants provide a large surplus of information when submitting a NHMRC Project Grant proposal for funding. This is costly in their time, attracts high administration costs, makes the task appear daunting for peer reviewers and may reduce the quality of the peer review leading to less than perfect reliability in decision making. We are currently experimenting with alternate models to see whether similar reliability in funding outcomes are achieved at less cost. We will compare traditional NHMRC Grant Review Panels (GRPs) with panels that use less information and journal style panels. By way of background to this experimental work, we will show some results on current levels of reliability for GRPs, the costs incurred by all who participate in Project Grant selection, and the level of reliability acceptable to researchers. By experimenting in this way and building an evidence base for how research funding should be allocated, the NHMRC is showing international leadership in this important field.

Collective sampling and analysis of high order tensors for chatroom communications

This work investigates the accuracy and efficiency tradeoffs between centralized and collective (distributed) algorithms for (i) sampling, and (ii) n-way data analysis techniques in multidimensional stream data, such as Internet chatroom communications. Its contributions are threefold. First, we use the Kolmogorov-Smirnov goodness-of-fit test to show that statistical differences between real data obtained by collective sampling in time dimension from multiple servers and that of obtained from a single server are insignificant. Second, we show using the real data that collective data analysis of 3-way data arrays (users x keywords x time) known as high order tensors is more efficient than centralized algorithms with respect to both space and computational cost. Furthermore, we show that this gain is obtained without loss of accuracy. Third, we examine the sensitivity of collective constructions and analysis of high order data tensors to the choice of server selection and sampling window size. We construct 4-way tensors (users x keywords x time x servers) and analyze them to show the impact of server and window size selections on the results.

Assessment of real-time networks and timing for process bus applications

Widespread adoption by electricity utilities of Non-Conventional Instrument Transformers, such as optical or capacitive transducers, has been limited due to the lack of a standardised interface and multi-vendor interoperability. Low power analogue interfaces are being replaced by IEC 61850 9 2 and IEC 61869 9 digital interfaces that use Ethernet networks for communication. These ‘process bus’ connections achieve significant cost savings by simplifying connections between switchyard and control rooms; however the in-service performance when these standards are employed is largely unknown. The performance of real-time Ethernet networks and time synchronisation was assessed using a scale model of a substation automation system. The test bed was constructed from commercially available timing and protection equipment supplied by a range of vendors. Test protocols have been developed to thoroughly evaluate the performance of Ethernet networks and network based time synchronisation. The suitability of IEEE Std 1588 Precision Time Protocol (PTP) as a synchronising system for sampled values was tested in the steady state and under transient conditions. Similarly, the performance of hardened Ethernet switches designed for substation use was assessed under a range of network operating conditions. This paper presents test methods that use a precision Ethernet capture card to accurately measure PTP and network performance. These methods can be used for product selection and to assess ongoing system performance as substations age. Key findings on the behaviour of multi-function process bus networks are presented. System level tests were performed using a Real Time Digital Simulator and transformer protection relay with sampled value and Generic Object Oriented Substation Events (GOOSE) capability. These include the interactions between sampled values, PTP and GOOSE messages. Our research has demonstrated that several protocols can be used on a shared process bus, even with very high network loads. This should provide confidence that this technology is suitable for transmission substations.

The role of, and key considerations for, advertising campaigns and educational awareness workshops within the work-related road safety context

Australian and international evidence suggests that, in the work-related driving context, road crashes account for a substantial number of occupational incidents. In the attempt to reduce injury and improve safety, organisations may implement an array of strategies and interventions ranging from policy development and implementation, vehicle selection and incident monitoring through to education and awareness-raising. This conceptual paper discusses aspects relating to the latter collection of interventions and, in particular, the role, and some key considerations with respect to the content and dissemination, of advertising campaigns and educational awareness workshops. In relation to advertising campaigns, this paper discusses how some of the overarching principles associated with advertising in the broader general community road safety strategy also apply within the work-related road safety context. Specifically, advertising campaigns/materials should be viewed as a key component within a dedicated organisational approach to road (driver) safety. This dedicated approach would need to comprise of a number, and varied array, of strategies. In addition, the content of, and medium/s (e.g., posters) by which to deliver such advertising campaigns, cannot be addressed by a one-size-fits all approach but, rather, requires careful consideration of the needs as well as characteristics of specific organisations and their driver fleet. The paper provides a summary of some key considerations when devising an advertising campaign, including the nature of campaign/message content as well as the processes by which to devise and refine such content. In relation to driver education awareness workshops, this paper outlines the key considerations for delivering a series of workshops specifically aimed at occupational driving within the organisational context. A case study approach will be utilised to demonstrate the manner in which educational awareness workshops can compliment successful advertising campaigns promoting safer work related driving through better risk management practice. Research underpinning the development of driver behaviour modification tools incorporated within the workshops will also be discussed along with the mechanisms utilised to encourage improvements in driver monitoring and behaviour. In an effort to assist organisations with their continual search for cost-effective approaches which may, ultimately, contribute to improvements in driver behaviour and safety, the current paper offers some clear and practical suggestions in relation to the development and dissemination of two types of interventions, advertising campaigns and education awareness workshops.

Heuristics and building price forecasting

The construction industry contains two types of estimators the contractors' estimator and the designers' price forecaster. Each has two models of the building in which to systemize his procedures - the production model and the design model. The use of these models is discussed in the light of the industry's particular problems of complexity and uncertainty together with the pressures of the market. It is argued that estimators and forecasters, in order to function effectively in these conditions, are forced to exercise a high degree of subjective judgment. Means of eliciting good heuristics involved in judgment making are considered by reference to the artificial intelligence and construction literature and a methodology is proposed based on these findings. The results of two early trials of the method with students are given, indicating the usefulness of the approach.

Primary classroom teachers' use of social and emotional wellbeing programs and the factors influencing program use

There has been a rapid escalation in the development and evaluation of social and emotional well-being (SEW) programs in primary schools over the last few decades. Despite the plethora of programs available, primary teachers’ use of SEW programs is not well documented in Australian schools, with even less consideration of the factors influencing program use. A cross-sectional survey was undertaken with primary classroom teachers across twelve schools in the Brisbane and Sunshine Coast Education Districts in Queensland, Australia, during 2005. A checklist of SEW programs and an audit of SEW practices in schools were employed to investigate the number, range and types of SEW programs used by primary classroom teachers and the contextual factors influencing program use. Whilst the majority of implementation studies have been conducted under intervention conditions, this study was designed to capture primary classroom teachers’ day-to-day use of SEW programs and the factors influencing program use under real-world conditions. The findings of this research indicate that almost three quarters of the primary classroom teachers involved in the study reported using at least one SEW program during 2005. Wide variation in the number and range of programs used was evident, suggesting that teachers are autonomous in their use of SEW programs. Evidence-based SEW programs were used by a similar proportion of teachers to non-evidence-based programs. However, irrespective of the type of program used, primary teachers overwhelmingly reported using part of a SEW program rather than the whole program. This raises some issues about the quality of teachers’ program implementation in real-world practice, especially with respect to programs that are evidence-based. A content analysis revealed that a wide range of factors have been examined as potential influences on teachers’ implementation of health promotion programs in schools, including SEW programs, despite the limited number of studies undertaken to date. However, variation in the factors examined and study designs employed both within and across health promotion fields limited the extent to which studies could be compared. A methodological and statistical review also revealed substantial variation in the quality of reporting of studies. A variety of factors were examined as potential influences on primary classroom teachers’ use of SEW programs across multiple social-ecological levels of influence (ranging from community to school and individual levels). In this study, parent or caregiver involvement in class activities and the availability of wellbeing-related policies in primary schools were found to be influential in primary classroom teachers’ use of SEW programs. Teachers who often or always involve parents or caregivers in class activities were at a higher odds of program use relative to teachers who never or rarely involved parents or caregivers in class activities. However, teachers employed in schools with the highest number of wellbeing-related policies available were at a lower odds of program use relative to teachers employed in schools with fewer wellbeing-related policies available. Future research should investigate primary classroom teachers’ autonomy and motivations for using SEW programs and the reasons behind the selection and use of particular types of programs. A larger emphasis should also be placed upon teachers not using SEW programs to identify valid reasons for non-use. This would provide another step towards bridging the gap between the expectations of program developers and the needs of teachers who implement programs in practice. Additionally, the availability of wellbeing-related school policies and the types of activities that parents and caregivers are involved with in the classroom warrant more in-depth investigation. This will help to ascertain how and why these factors influence primary classroom teachers’ use of SEW programs on a day-to-day basis in schools.

China’s new creative strategy : the utilization of cultural soft power and new markets

This book examines different aspects of Asian popular culture, including films, TV, music, comedy, folklore, cultural icons, the Internet and theme parks. It raises important questions such as – What are the implications of popularity of Asian popular culture for globalization? Do regional forces impede the globalizing of cultures? Or does the Asian popular culture flow act as a catalyst or conveying channel for cultural globalization? Does the globalization of culture pose a threat to local culture? It addresses two seemingly contradictory and yet parallel processes in the circulation of Asian popular culture: the interconnectedness between Asian popular culture and western culture in an era of cultural globalization that turns subjects such as Pokémon, Hip Hop or Cosmopolitan into truly global phenomena, and the local derivatives and versions of global culture that are necessarily disconnected from their origins in order to cater for the local market. It thereby presents a collective argument that, whilst local social formations, and patterns of consumption and participation in Asia are still very much dependent on global cultural developments and the phenomena of modernity, yet such dependence is often concretized, reshaped and distorted by the local media to cater for the local market. Contents: Introduction: Asian Popular Culture: The Global (Dis)continuity Anthony Y.H. Fung Part 1: The Dominance of Global Continuity: Cultural Localization and Adaptation 1. One Region, Two Modernities: Disneyland in Tokyo and Hong Kong Micky Lee and Anthony Y.H. Fung 2. Comic Travels: Disney Publishing in the People’s Republic of China Jennifer Altehenger 3. When Chinese Youth Meet Harry Potter: Translating Consumption and Middle Class Identification John Nguyet Erni 4.New Forms of Transborder Visuality in Urban China: Saving Face for Magazine Covers Eric Kit-Wai Ma 5. Cultural Consumption and Masculinity: A Case Study of GQ Magazine Covers in Taiwan Hong-Chi Shiau Part 2: Global Discontinuity: The Local Absorption of Global Culture 6. An Unlocalized and Unglobalized Subculture: English Language Independent Music in Singapore Kai Khiun Liew and Shzr Ee Tan 7. The Localized Production of Jamaican Music in Thailand Viriya Sawangchot 8. Consuming Online Games in Taiwan: Global Games and Local Market Lai-Chi Chen 9. The Rise of the Korean Cinema in Inbound and Outbound Globalization Shin Dong Kim Part 3: Cultural Domestication: A New Form of Global Continuity 10. Pocket Capitalism and Virtual Intimacy: Pokémon as a Symptom of Post-Industrial Youth Culture Anne Allison 11. Playing the Global Game: Japan Brand and Globalization Kukhee Choo Part 4: China as a Rising Market: Cultural Antagonism and Globalization 12. China’s New Creative Strategy: The Utilization of Cultural Soft Power and New Markets Michael Keane and Bonnie Liu 13. Renationalizing Hong Kong Cinema: The Gathering Force of the Mainland Market Michael Curtin

Influence of ventilation and filtration on indoor particle concentrations in urban office buildings

This study aimed to quantify the efficiency of deep bag and electrostatic filters, and assess the influence of ventilation systems using these filters on indoor fine (<2.5 µm) and ultrafine particle concentrations in commercial office buildings. Measurements and modelling were conducted for different indoor and outdoor particle source scenarios at three office buildings in Brisbane, Australia. Overall, the in-situ efficiency, measured for particles in size ranges 6 to 3000 nm, of the deep bag filters ranged from 26.3 to 46.9% for the three buildings, while the in-situ efficiency of the electrostatic filter in one building was 60.2%. The highest PN and PM2.5 concentrations in one of the office buildings (up to 131% and 31% higher than the other two buildings, respectively) were due to the proximity of the building’s HVAC air intakes to a nearby bus-only roadway, as well as its higher outdoor ventilation rate. The lowest PN and PM2.5 concentrations (up to 57% and 24% lower than the other two buildings, respectively) were measured in a building that utilised both outdoor and mixing air filters in its HVAC system. Indoor PN concentrations were strongly influenced by outdoor levels and were significantly higher during rush-hours (up to 41%) and nucleation events (up to 57%), compared to working-hours, for all three buildings. This is the first time that the influence of new particle formation on indoor particle concentrations has been identified and quantified. A dynamic model for indoor PN concentration, which performed adequately in this study also revealed that using mixing/outdoor air filters can significantly reduce indoor particle concentration in buildings where indoor air was strongly influenced by outdoor particle levels. This work provides a scientific basis for the selection and location of appropriate filters and outdoor air intakes, during the design of new, or upgrade of existing, building HVAC systems. The results also serve to provide a better understanding of indoor particle dynamics and behaviours under different ventilation and particle source scenarios, and highlight effective methods to reduce exposure to particles in commercial office buildings.

Genetic response to combined family selection for improved mean harvest weight in giant freshwater prawn (Macrobrachium rosenbergii) in Vietnam

We estimated genetic changes in body and carcass weight traits in a giant freshwater prawn (GFP) (Macrobrachium rosenbergii) population selected for increased body weight at harvest in Vietnam. The data set consisted of 18,387 individual body and 1730 carcass weight records, as well as full pedigree information collected over four generations. Average selection response (per generation) in body weight at harvest (transformed to square root) estimated as the difference between the Selection line and the Control group was 7.4% calculated from least squares mean (LSMs), 7.0% from estimated breeding values (EBVs) and 4.4% calculated from EBVs between two consecutive generations. Favorable correlated selection responses (estimated from LSMs) were found for other body traits including: total length, cephalothorax length, abdominal length, cephalothorax width, and abdominal width (12.1%, 14.5%, 10.4%, 15.5% and 13.3% over three selection generations, respectively). Data in the second generation of selection showed positive correlated responses for carcass weight traits including: abdominal weight, exoskeleton-off weight, and telson-off weight of 8.8%, 8.6% and 8.8%, respectively. We conclude that body weight at harvest responded well to the application of combined (between and within) family selection and correlated responses in carcass weight traits were favorable.

Two-stage power network reconfiguration strategy considering node importance and restored generation capacity

Network reconfiguration after complete blackout of a power system is an essential step for power system restoration. A new node importance evaluation method is presented based on the concept of regret, and maximisation of the average importance of a path is employed as the objective of finding the optimal restoration path. Then, a two-stage method is presented to optimise the network reconfiguration strategy. Specifically, the restoration sequence of generating units is first optimised so as to maximise the restored generation capacity, then the optimal restoration path is selected to restore the generating nodes concerned and the issues of selecting a serial or parallel restoration mode and the reconnecting failure of a transmission line are next considered. Both the restoration path selection and skeleton-network determination are implemented together in the proposed method, which overcomes the shortcoming of separate decision-making in the existing methods. Finally, the New England 10-unit 39-bus power system and the Guangzhou power system in South China are employed to demonstrate the basic features of the proposed method.

A systematic approach for selecting lean strategies and assessing leanness in manufacturing organizations

Lean strategies have been developed to eliminate or reduce manufacturing waste and thus improve operational efficiency in manufacturing processes. However, implementing lean strategies requires a large amount of resources and, in practice, manufacturers encounter difficulties in selecting appropriate lean strategies within their resource constraints. There is currently no systematic methodology available for selecting appropriate lean strategies within a manufacturer's resource constraints. In the lean transformation process, it is also critical to measure the current and desired leanness levels in order to clearly evaluate lean implementation efforts. Despite the fact that many lean strategies are utilized to reduce or eliminate manufacturing waste, little effort has been directed towards properly assessing the leanness of manufacturing organizations. In practice, a single or specific group of metrics (either qualitative or quantitative) will only partially measure the overall leanness. Existing leanness assessment methodologies do not offer a comprehensive evaluation method, integrating both quantitative and qualitative lean measures into a single quantitative value for measuring the overall leanness of an organization. This research aims to develop mathematical models and a systematic methodology for selecting appropriate lean strategies and evaluating the leanness levels in manufacturing organizations. Mathematical models were formulated and a methodology was developed for selecting appropriate lean strategies within manufacturers' limited amount of available resources to reduce their identified wastes. A leanness assessment model was developed by using the fuzzy concept to assess the leanness level and to recommend an optimum leanness value for a manufacturing organization. In the proposed leanness assessment model, both quantitative and qualitative input factors have been taken into account. Based on program developed in MATLAB and C#, a decision support tool (DST) was developed for decision makers to select lean strategies and evaluate the leanness value based on the proposed models and methodology hence sustain the lean implementation efforts. A case study was conducted to demonstrate the effectiveness of these proposed models and methodology. Case study results suggested that out of 10 wastes identified, the case organization (ABC Limited) is able to improve a maximum of six wastes from the selected workstation within their resource limitations. The selected wastes are: unnecessary motion, setup time, unnecessary transportation, inappropriate processing, work in process and raw material inventory and suggested lean strategies are: 5S, Just-In-Time, Kanban System, the Visual Management System (VMS), Cellular Manufacturing, Standard Work Process using method-time measurement (MTM), and Single Minute Exchange of Die (SMED). From the suggested lean strategies, the impact of 5S was demonstrated by measuring the leanness level of two different situations in ABC. After that, MTM was suggested as a standard work process for further improvement of the current leanness value. The initial status of the organization showed a leanness value of 0.12. By applying 5S, the leanness level significantly improved to reach 0.19 and the simulation of MTM as a standard work method shows the leanness value could be improved to 0.31. The optimum leanness value of ABC was calculated to be 0.64. These leanness values provided a quantitative indication of the impacts of improvement initiatives in terms of the overall leanness level to the case organization. Sensitivity analsysis and a t-test were also performed to validate the model proposed. This research advances the current knowledge base by developing mathematical models and methodologies to overcome lean strategy selection and leanness assessment problems. By selecting appropriate lean strategies, a manufacturer can better prioritize implementation efforts and resources to maximize the benefits of implementing lean strategies in their organization. The leanness index is used to evaluate an organization's current (before lean implementation) leanness state against the state after lean implementation and to establish benchmarking (the optimum leanness state). Hence, this research provides a continuous improvement tool for a lean manufacturing organization.

Agrobacterium tumefaciens-mediated transformation of an elite Australian barley cultivar with virus resistance and reporter genes

Efficient transformation of barley cv. Schooner was achieved using Agrobacterium delivery, hygromycin or bialaphos selection and embryogenic callus. Using this system, transgenic plants were generated that contained either the green fluorescent protein gene, or transgenes derived from barley yellow dwarf (BYDV) and cereal yellow dwarf (CYDV) viruses. Many of these plants contained 1-3 transgene copies that were inherited in a simple Mendelian manner. Some plants containing BYDV and/or CYDV derived transgenes showed reduced virus symptoms and rates of viral replication when challenged with the appropriate virus. The ability to transform Schooner is a significant advance for the Australian barley industry, as this elite malting variety is, and has for the last 15 years been, the most widely grown barley variety in eastern Australia.

Selling new neighborhoods as good for walking : issues for measuring self-selection

Background: Self-selection-whether individuals inclined to walk more seek to live in walkable environments-must be accounted for when studying built environment influences on walking. The way neighborhoods are marketed to future residents has the potential to sway residential location choice, and may consequently affect measures of self-selection related to location preferences. We assessed how walking opportunities are promoted to potential buyers, by examining walkability attributes in marketing materials for housing developments. Methods: A content analysis of marketing materials for 32 new housing developments in Perth, Australia was undertaken, to assess how walking was promoted in the text and pictures. Housing developments designed to be pedestrian-friendly (LDs) were compared with conventional developments (CDs). Results: Compared with CDs, LD marketing materials had significantly more references to 'public transport,' small home sites,' walkable parks/open space,' ease of cycling,' safe environment,' and 'boardwalks.' Other walkability attributes approached significance. Conclusion: Findings suggest the way neighborhoods are marketed may contribute to self-reported reasons for choosing particular neighborhoods, especially when attributes are not present at the time of purchase. The marketing of housing developments may be an important factor to consider when measuring self-selection, and its influence on the built environment and walking relationship.

Social and cultural borders in Rio de Janeiro : the everyday life of community and mainstream photojournalists

This paper takes a multimethod approach which combines ethnographic techniques and discourse studies to investigate two contrasting professional groups: community photographers, who are favela dwellers who have developed photographic projects in Brazil‘s favelas, and photojournalists of the mainstream media. Its purpose is to determine how a cultural and social divide in the city of Rio de Janeiro shapes both community photographers and mainstream photojournalists’ practices, discourses, and identities. While community photographers strive to establish a humane and positive view about favelas and their residents by shifting the focus from poverty, shortages, violence, and criminality to images of the ordinary life, mainstream photojournalists express the view that their role is of primary importance for the defence of human rights in the favelas by helping to prevent, for instance, police abuses and violations. As the data analysis indicated the existence of socio-spatial borders all over Rio de Janeiro, this study adopted the idea of a divided city without denying interconnections between favelas and the city’s political life. Through the analysis of categories which emerged from the data, the complex world of documenting favela life is explored. The major themes touched upon are: the breakdown between the mainstream media and the favela communities; the different kinds of relationships which arise in Rio’s low income suburbs; and the gradual return of mainstream news workers to favelas.

Consultant engagement for computer system selection: a pro-active client role in small enterprises

Because of their limited number of senior positions and fewer alternative career paths, small businesses have a more difficult time attracting and retaining skilled information systems (IS) staff and are thus dependent upon external expertise. Small businesses are particularly dependent on outside expertise when first computerizing. Because small businesses suffer from severe financial constraints. it is often difficult to justify the cost of custom software. Hence. for many small businesses, engaging a consultant to help with identifying suitable packaged software and related hardware, is their first critical step toward computerization. This study explores the importance of proactive client involvement when engaging a consultant to assist with computer system selection in small businesses. Client involvement throughout consultant engagement is found to be integral to project success and frequently lacking due to misconceptions of small businesses regarding their role. Small businesses often overestimate the impact of consultant and vendor support in achieving successful computer system selection and implementation. For consultant engagement to be successful, the process must be viewed as being directed toward the achievement of specific organizational results where the client accepts responsibility for direction of the process.