Electron petrography of fine-grained matrix in the Karoonda C4 carbonaceous chondrite

The study of matrices of rare Type 4 carbonaceous chondrites can reveal important information on parent body rnetamorp~ic processes and provide a comparison with processes on parent bodies of ordinary chc-idrites. Reflectance spectra (Tholen, 1984) from the two largest asteroids in the asteroid belt, Ceres and Pallas, suggest that they may be metamorphosed carbonaceous chondrites. These two asteroids constitute - onethird of the mass in the asteroid belt implying that type 4-6 carbonaceous chondrites are poorly represented in the meteorite collection and may be of considerable importance. The matrix of the C4 chondrite Karoonda has been investigated using a JEOL 2000FX analytical electron microscope (AEM) with an attached Tracor-Northem TN5500 energy dispersive spectrometer (EDS). In previous studies (Scott and Taylor, 1985; Fitzgerald, 1979; Van Schmus, 1969), the petrography of the Karoonda matrix has been described as consisting largely of coarse-grained (50-200 urn in size) olivine and plagioclase (20-100 um in size), associated with micrometer sized magnetite and rare sulphides. AEM observations on matrix show that in addition to these large grains, there is a significant fraction (10 vol%) of interstitial fine grained phases « 5 urn). The mineralogy of these fine-grained phases differs in some respects from that of the coarser-grained matrix identified by optical and SEM techniques (Scott and Taylor, 1985; Fitzgerald, 1979; Van Schmus, 1969). I~ particular crystals of two compositionally distinct pyroxenes « 2 urn in size) have been identified which have not been previously observed in Karoonda by other analytical techniques. Thin film microanalyses (Mackinnon et al., 1986) of these two pyroxenes indicate compositions consistent with augite and low-Ca pyroxene (- Fs27). Fine-grained anhedral olivine « 2 urn size) is the most abundant phase with composition -Fa29' This composition is essentially indistinguishable from that determined for coarser-grained matrix olivines using an electron microprobe (Scott and Taylor, 1985; Fitzgerald, 1979; Van Schmus, 1969). All olivines are associated with subhedral magnetites « 1 urn size) which contain significant Cr (- 2%) and Al (- 1%) as was also noted for larger sized Karoonda magnetites by Delaney et al. (1985). It has recently been suggested (Burgess et al., 1987) on the basis of sulphur release profiles for S-isotope analyses of Karoonda that CaS04 (anhydrite) may be present. However, no sulphate phase has, as yet, been identified in the matrix of Karoonda. Low magnification contrast images suggest that Karoonda may have a significant porosity within the fine-grained matrix fraction. Most crystals are anhedral and do not show evidence for significant compaction. Individual grains often show single point contact with other grains which result in abundant intergranular voids. These voids frequently contain epoxy which was used as part of the specimen preparation procedure due to the friable nature of the bulk sample.

Sublime acts : desire in the studio

Acknowledging the recent call to review design creativity and consideration of the body's affective states in education, this paper explores how desire, conceptualized as an immanent force (Deleuze & Guattari, 1987) and an irresistible force (Burke, 1753) can be a means of deeper engagement within the design studio. Positing 'disruption or blockage' as a key agent which propels subjects from fields of normalcy to fields of otherness, and subsequently mobilises distinct modes of desire, this paper takes Edmund Burke's Romantic sublime and Patricia Yaeger's feminine sublime as critical lenses through which to review a first year interior program posited around the body. The paper highlights how the embodiment of 'desirous processes' within the design program and relational encounters within the studio represent an overarching pedagogical 'hinge' (Ellsworth, 2005). Rather than being a point of beginning, the start of first year is seen and experienced as a threshold opening to a new rhythm in a proces of becoming that is already underway.

Bomb disposal in the tropics : a cocktail of metabolic and environmental heat

Bomb technicians perform their work while encapsulated in explosive ordnance disposal (EOD) suits. Designed primarily for safety, these suits have an unintended consequence of impairing the body’s natural mechanisms for heat dissipation. Purpose: To quantify the heat strain encountered during an EOD operational scenario in the tropical north of Australia. Methods: All active police male bomb technicians, located in a tropical region of Australia (n=4, experience 7 ± 2.1 yrs, age 34 ± 2 yrs, height 182.3 ± 5.4 cm, body mass 95 ± 4 kg, VO2max 46 ± 5.7 ml.kg-1.min-1) undertook an operational scenario wearing the Med-Eng EOD 9 suit and helmet (~32 kg). The climatic conditions ranged between 27.1–31.8°C ambient temperature, 66-88% relative humidity, and 30.7-34.3°C wet bulb globe temperature. The scenario involved searching a two story non air-conditioned building for a target; carrying and positioning equipment for taking an X-ray; carrying and positioning equipment to disrupt the target; and finally clearing the site. Core temperature and heart rate were continuously monitored, and were used to calculate a physiological strain index (PSI). Urine specific gravity (USG) assessed hydration status and heat associated symptomology were also recorded. Results: The scenario was completed in 121 ± 22 mins (23.4 ± 0.4% work, 76.5 ± 0.4% rest/recovery). Maximum core temperature (38.4 ± 0.2°C), heart rate (173 ± 5.4 bpm, 94 ± 3.3% max), PSI (7.1 ± 0.4) and USG (1.031 ± 0.002) were all elevated after the simulated operation. Heat associated symptomology highlighted that moderate-severe levels of fatigue and thirst were universally experienced, muscle weakness and heat sensations experienced by 75%, and one bomb technician reported confusion and light-headedness. Conclusion: All bomb technicians demonstrated moderate-high levels of heat strain, evidenced by elevated heart rate, core body temperature and PSI. Severe levels of dehydration and noteworthy heat-related symptoms further highlight the risks to health and safety faced by bomb technicians operating in tropical locations.

Using a pharmacokinetic model to interpret biomonitoring data of PBDEs in the Australian population

From human biomonitoring data that are increasingly collected in the United States, Australia, and in other countries from large-scale field studies, we obtain snap-shots of concentration levels of various persistent organic pollutants (POPs) within a cross section of the population at different times. Not only can we observe the trends within this population with time, but we can also gain information going beyond the obvious time trends. By combining the biomonitoring data with pharmacokinetic modeling, we can re-construct the time-variant exposure to individual POPs, determine their intrinsic elimination half-lives in the human body, and predict future levels of POPs in the population. Different approaches have been employed to extract information from human biomonitoring data. Pharmacokinetic (PK) models were combined with longitudinal data1, with single2 or multiple3 average concentrations of a cross-sectional data (CSD), or finally with multiple CSD with or without empirical exposure data4. In the latter study, for the first time, the authors based their modeling outputs on two sets of CSD and empirical exposure data, which made it possible that their model outputs were further constrained due to the extensive body of empirical measurements. Here we use a PK model to analyze recent levels of PBDE concentrations measured in the Australian population. In this study, we are able to base our model results on four sets5-7 of CSD; we focus on two PBDE congeners that have been shown3,5,8-9 to differ in intake rates and half-lives with BDE-47 being associated with high intake rates and a short half-life and BDE-153 with lower intake rates and a longer half-life. By fitting the model to PBDE levels measured in different age groups in different years, we determine the level of intake of BDE-47 and BDE-153, as well as the half-lives of these two chemicals in the Australian population.

Creating 'saviour siblings' : the notion of harming by conceiving in the context of healthy children

Over the past decade there have been a number of families who have utilised assisted reproductive technologies (ARTs) to create a tissue-matched child, with the purpose of using the child’s tissue to cure an existing sick child. This inevitably brings such families a sense of hope as the ultimate aim is to overcome a family health crisis. However, this specific use of reproductive technologies has been the subject of significant criticism, most of which is levelled against the potential harm to the ‘saviour’ child. In Australia, families seeking to access reproductive technologies in this context are therefore required to justify their motives to an ethics committee in order to establish, amongst other things, whether the child will suffer harm once born. This paper explores the concept of harm in the context of conception, focusing on whether it is possible to ‘harm’ a healthy child who has been conceived to save another. To achieve this, the paper will evaluate the impact of the ‘non-identity’ principle in the ‘saviour sibling’ context, and assess the existing body of literature which addresses ‘harm’ in the context of conception. As will be established, the majority of such literature has focused on ‘wrongful life’ cases which seek to address whether an existing child who has been born with a disability, has been harmed. Finally, this paper will distinguish the harm arguments in the ‘saviour sibling’ context based on the fact that the harm evaluation concerns the ‘future-life’ assessment of a healthy child.

Conflict and seduction in the public sphere

In a critical but sympathetic reading of Habermas’s work (1984, 1987a, 1987b, 2003), Luke Goode (2005) recently sought to rework his theory of deliberative democracy in an age of mediated and increasingly digital public spheres. Taking a different approach, Alan McKee (2005) challenged the culture- and class-bound strictures of Habermasian rationalism, instead pursuing a more radically pluralist account of postmodern public spheres. The editors of this special section of Media, Culture & Society invited us to discuss our differing approaches to the public sphere. Goode holds that the institutional bases of contemporary public spheres (political parties, educational institutions or public media) remain of critical importance, albeit in the context of a kaleidoscopic array of unofficial and informal micro-publics, both localized and de-territorialized. In contrast, McKee sustains a ‘hermeneutics of suspicion’ toward the official, hegemonic institutions of the public sphere since they tend to exclude and delegitimize discourses and practices that challenge their polite middle-class norms. McKee’s recent research has focused on sexual cultures, particularly among youth (McKee, 2011). Goode’s recent work has examined new social media spaces, particularly in relation to news and public debate (e.g. Goode, 2009; Goode et al., 2011). Consequently, our discussion turned to a domain which links our interests: after Goode discussed some of his recent research on (in)civility on YouTube as a new media public sphere, McKee challenged him to consider the case of pornographic websites modelled on social media sites.1 He identifies a greater degree of ‘civility’ in these pornographic sibling sites than on YouTube, requiring careful consideration of what constitutes a ‘public sphere’ in contemporary digital culture. Such sites represent an environment that shatters the opposition of public and private interest, affording public engagement on matters of the body, of intimacy, of gender politics, of pleasure and desire – said by many critics to be ruled out of court in Habermasian theory. Such environments also trouble traditional binaries between the cognitive and the affective, and between the performative and the deliberative. In what follows we explore the differences between our approaches in the form of a dialogue. As is often the case, our approaches seemed less at odds after engaging in conversation than may have initially appeared. But important differences of emphasis remain.

Injuries leading to hospitalisation in the first year of life : analysis by trimester of age using coded data and textual description

Objective: To describe unintentional injuries to children aged less than one year, using coded and textual information, in three-month age bands to reflect their development over the year. Methods: Data from the Queensland Injury Surveillance Unit was used. The Unit collects demographic, clinical and circumstantial details about injured persons presenting to selected emergency departments across the State. Only injuries coded as unintentional in children admitted to hospital were included for this analysis. Results: After editing, 1,082 children remained for analysis, 24 with transport-related injuries. Falls were the most common injury, but becoming proportionately less over the year, whereas burns and scalds and foreign body injuries increased. The proportion of injuries due to contact with persons or objects varied little, but poisonings were relatively more common in the first and fourth three-month periods. Descriptions indicated that family members were somehow causally involved in 16% of injuries. Our findings are in qualitative agreement with comparable previous studies. Conclusion: The pattern of injuries varies over the first year of life and is clearly linked to the child's increasing mobility. Implications: Injury patterns in the first year of life should be reported over shorter intervals. Preventive measures for young children need to be designed with their rapidly changing developmental stage in mind, using a variety of strategies, one of which could be opportunistic developmentally specific education of parents. Injuries in young children are of abiding concern given their immediate health and emotional effects, and potential for long-term adverse sequelae. In Australia, in the financial year 2006/07, 2,869 children less than 12 months of age were admitted to hospital for an unintentional injury, a rate of 10.6 per 1,000, representing a considerable economic and social burden. Given that many of these injuries are preventable, this is particularly concerning. Most epidemiologic studies analyse data in five-year age bands, so children less than five years of age are examined as a group. This study includes only those children younger than one year of age to identify injury detail lost in analyses of the larger group, as we hypothesised that the injury pattern varied with the developmental stage of the child. The authors of several North American studies have commented that in dealing with injuries in pre-school children, broad age groupings are inadequate to do justice to the rapid developmental changes in infancy and early childhood, and have in consequence analysed injuries in shorter intervals. To our knowledge, no similar analysis of Australian infant injuries has been published to date. This paper describes injury in children less than 12 months of age using data from the Queensland Injury Surveillance Unit (QISU).

Guerrillas in the [urban] midst : Developing and using creative research methods - guerrilla research tactics

This paper explores what we are calling “Guerrilla Research Tactics” (GRT): research methods that exploit emerging mobile and cloud based digital technologies. We examine some case studies in the use of this technology to generate research data directly from the physical fabric and the people of the city. We argue that GRT is a new and novel way of engaging public participation in urban, place based research because it facilitates the co- creation of knowledge, with city inhabitants, ‘on the fly’. This paper discusses the potential of these new research techniques and what they have to offer researchers operating in the creative disciplines and beyond. This work builds on and extends Gauntlett’s “new creative methods” (2007) and contributes to the existing body of literature addressing creative and interactive approaches to data collection.

Suspected mechanisms in the cause of overuse running injuries : A clinical review

Context: Various epidemiological studies have estimated that up to 70% of runners sustain an overuse running injury each year. Although few overuse running injuries have an established cause, more than 80% of running-related injuries occur at or below the knee, which suggests that some common mechanisms may be at work. The question then becomes, are there common mechanisms related to overuse running injuries? Evidence Acquisition: Research studies were identified via the following electronic databases: MEDLINE, EMBASE PsycInfo, and CINAHL (1980–July 2008). Inclusion was based on evaluation of risk factors for overuse running injuries. Results: A majority of the risk factors that have been researched over the past few years can be generally categorized into 2 groups: atypical foot pronation mechanics and inadequate hip muscle stabilization. Conclusion: Based on the review of literature, there is no definitive link between atypical foot mechanics and running injury mechanisms. The lack of normative data and a definition of typical foot structure has hampered progress. In contrast, a large and growing body of literature suggests that weakness of hip-stabilizing muscles leads to atypical lower extremity mechanics and increased forces within the lower extremity while running.

Overweight and obesity alters the cumulative transverse strain in the Achilles tendon immediately following exercise

This research evaluated the effect of obesity on the acute cumulative transverse strain of the Achilles tendon in response to exercise. Twenty healthy adult males were categorized into ‘low normal-weight’ (BMI <23 kg m−2) and ‘overweight’ (BMI >27.5 kg m−2) groups based on intermediate cut-off points recommended by the World Health Organization. Longitudinal sonograms of the right Achilles tendon were acquired immediately prior and following weight-bearing ankle exercises. Achilles tendon thickness was measured 20-mm proximal to the calcaneal insertion and transverse tendon strain was calculated as the natural log of the ratio of post- to pre-exercise tendon thickness. The Achilles tendon was thicker in the overweight group both prior to (t18 = −2.91, P = 0.009) and following (t18 = −4.87, P < 0.001) exercise. The acute transverse strain response of the Achilles tendon in the overweight group (−10.7 ± 2.5%), however, was almost half that of the ‘low normal-weight’ (−19.5 ± 7.4%) group (t18 = −3.56, P = 0.004). These findings suggest that obesity is associated with structural changes in tendon that impairs intra-tendinous fluid movement in response to load and provides new insights into the link between tendon pathology and overweight and obesity.

Segmental torso masses and coronal plane joint torques in the adolescent scoliotic spine

Introduction. Calculating segmental (vertebral level-by-level) torso masses in Adolescent Idiopathic Scoliosis (AIS) patients allows the gravitational loading on the scoliotic spine during relaxed standing to be determined. This study used CT scans of AIS patients to measure segmental torso masses and explores how joint moments in the coronal plane are affected by changes in the position of the intervertebral joint’s axis of rotation; particularly at the apex of a scoliotic major curve. Methods. Existing low dose CT data from the Paediatric Spine Research Group was used to calculate vertebral level-by-level torso masses and joint torques occurring in the spine for a group of 20 female AIS patients (mean age 15.0 ± 2.7 years, mean Cobb angle 53 ± 7.1°). Image processing software, ImageJ (v1.45 NIH USA) was used to threshold the T1 to L5 CT images and calculate the segmental torso volume and mass corresponding to each vertebral level. Body segment masses for the head, neck and arms were taken from published anthropometric data. Intervertebral (IV) joint torques at each vertebral level were found using principles of static equilibrium together with the segmental body mass data. Summing the torque contributions for each level above the required joint, allowed the cumulative joint torque at a particular level to be found. Since there is some uncertainty in the position of the coronal plane Instantaneous Axis of Rotation (IAR) for scoliosis patients, it was assumed the IAR was located in the centre of the IV disc. A sensitivity analysis was performed to see what effect the IAR had on the joint torques by moving it laterally 10mm in both directions. Results. The magnitude of the torso masses from T1-L5 increased inferiorly, with a 150% increase in mean segmental torso mass from 0.6kg at T1 to 1.5kg at L5. The magnitudes of the calculated coronal plane joint torques during relaxed standing were typically 5-7 Nm at the apex of the curve, with the highest apex joint torque of 7Nm being found in patient 13. Shifting the assumed IAR by 10mm towards the convexity of the spine, increased the joint torque at that level by a mean 9.0%, showing that calculated joint torques were moderately sensitive to the assumed IAR location. When the IAR midline position was moved 10mm away from the convexity of the spine, the joint torque reduced by a mean 8.9%. Conclusion. Coronal plane joint torques as high as 7Nm can occur during relaxed standing in scoliosis patients, which may help to explain the mechanics of AIS progression. This study provides new anthropometric reference data on vertebral level-by-level torso mass in AIS patients which will be useful for biomechanical models of scoliosis progression and treatment. However, the CT scans were performed in supine (no gravitational load on spine) and curve magnitudes are known to be smaller than those measured in standing.

Memory effect in the deposition of C20 fullerenes on a diamond surface

In this paper, the deposition of C-20 fullerenes on a diamond (001)-(2x1) surface and the fabrication of C-20 thin film at 100 K were investigated by a molecular dynamics (MD) simulation using the many-body Brenner bond order potential. First, we found that the collision dynamic of a single C-20 fullerene on a diamond surface was strongly dependent on its impact energy. Within the energy range 10-45 eV, the C-20 fullerene chemisorbed on the surface retained its free cage structure. This is consistent with the experimental observation, where it was called the memory effect in "C-20-type" films [P. Melion , Int. J. Mod. B 9, 339 (1995); P. Milani , Cluster Beam Synthesis of Nanostructured Materials (Springer, Berlin, 1999)]. Next, more than one hundred C-20 (10-25 eV) were deposited one after the other onto the surface. The initial growth stage of C-20 thin film was observed to be in the three-dimensional island mode. The randomly deposited C-20 fullerenes stacked on diamond surface and acted as building blocks forming a polymerlike structure. The assembled film was also highly porous due to cluster-cluster interaction. The bond angle distribution and the neighbor-atom-number distribution of the film presented a well-defined local order, which is of sp(3) hybridization character, the same as that of a free C-20 cage. These simulation results are again in good agreement with the experimental observation. Finally, the deposited C-20 film showed high stability even when the temperature was raised up to 1500 K.

Critical reflection on the SIA’s professional project and the body of knowledge

Over the last few years the Safety Institute of Australia (SIA) has developed and implemented a number of strategies to gain professional status for the ‘generalist occupational health and safety professional’. Two of the most significant developments have been the publication of the ‘Core Body of Knowledge for the Generalist OHS Professional.’ and the accreditation of university OHS courses. Despite a considerable amount of work aimed at gaining professional status there has not been any public debate or reflection about how the professionalisation project may impact on OHS and how the project is being conducted. Professionalisation has been vigorously promoted as a sign of maturity for the SIA and which will provide unmitigated benefits for workplace health and safety. The aim of this paper is to critically reflect on the processes of professionalisation (the professional project) and discuss some of the ways in which this project may shape the field of occupational health and safety. The implications for the role of universities will also be discussed.

Principal component and linkage analysis of cardiovascular risk traits in the Norfolk isolate

OBJECTIVE(S): An individual's risk of developing cardiovascular disease (CVD) is influenced by genetic factors. This study focussed on mapping genetic loci for CVD-risk traits in a unique population isolate derived from Norfolk Island. METHODS: This investigation focussed on 377 individuals descended from the population founders. Principal component analysis was used to extract orthogonal components from 11 cardiovascular risk traits. Multipoint variance component methods were used to assess genome-wide linkage using SOLAR to the derived factors. A total of 285 of the 377 related individuals were informative for linkage analysis. RESULTS: A total of 4 principal components accounting for 83% of the total variance were derived. Principal component 1 was loaded with body size indicators; principal component 2 with body size, cholesterol and triglyceride levels; principal component 3 with the blood pressures; and principal component 4 with LDL-cholesterol and total cholesterol levels. Suggestive evidence of linkage for principal component 2 (h(2) = 0.35) was observed on chromosome 5q35 (LOD = 1.85; p = 0.0008). While peak regions on chromosome 10p11.2 (LOD = 1.27; p = 0.005) and 12q13 (LOD = 1.63; p = 0.003) were observed to segregate with principal components 1 (h(2) = 0.33) and 4 (h(2) = 0.42), respectively. CONCLUSION(S): This study investigated a number of CVD risk traits in a unique isolated population. Findings support the clustering of CVD risk traits and provide interesting evidence of a region on chromosome 5q35 segregating with weight, waist circumference, HDL-c and total triglyceride levels.

Linkage mapping of CVD risk traits in the isolated Norfolk Island population

To understand the underlying genetic architecture of cardiovascular disease (CVD) risk traits, we undertook a genome-wide linkage scan to identify CVD quantitative trait loci (QTLs) in 377 individuals from the Norfolk Island population. The central aim of this research focused on the utilization of a genetically and geographically isolated population of individuals from Norfolk Island for the purposes of variance component linkage analysis to identify QTLs involved in CVD risk traits. Substantial evidence supports the involvement of traits such as systolic and diastolic blood pressures, high-density lipoprotein-cholesterol, low-density lipoprotein-cholesterol, body mass index and triglycerides as important risk factors for CVD pathogenesis. In addition to the environmental inXuences of poor diet, reduced physical activity, increasing age, cigarette smoking and alcohol consumption, many studies have illustrated a strong involvement of genetic components in the CVD phenotype through family and twin studies. We undertook a genome scan using 400 markers spaced approximately 10 cM in 600 individuals from Norfolk Island. Genotype data was analyzed using the variance components methods of SOLAR. Our results gave a peak LOD score of 2.01 localizing to chromosome 1p36 for systolic blood pressure and replicated previously implicated loci for other CVD relevant QTLs.