The invisibility cloak of creativity

There is often a gap between teaching beliefs and actual practice, between ‘what is valued and what is taught’ (Jones, 2009, p. 175). This may be particularly true when it comes to teaching creatively and teaching for creativity in higher education. This lack of congruence is not necessarily due to a lack of awareness about what is possible, or the desire to enact change in this domain. It may, however, be due to a mix of less easily manipulated contextual factors (environmental, socio-cultural, political and economic), and a lack of discourse (Jackson, 2006) around the problem...

Environmental conditions are important for establishing and evaluating pre-clinical models of GVHD

GVHD remains the major complication of allo-HSCT. Murine models are the primary system used to understand GVHD, and to develop potential therapies. Several factors are critical for GVHD in these models; including histo- compatibility, conditioning regimen, and T-cell number. We serendipitously found that environmental factors such as the caging system and bedding also significantly impact the kinetics of GVHD in these models. This is important because such factors may influence the experimental conditions required to cause GVHD and how mice respond to various treatments. Consequently, this is likely to alter interpretation of results between research groups, and the perceived effectiveness of experimental therapies.

Socio-environmental drivers and suicide in Australia: Bayesian spatial analysis

Background The impact of socio-environmental factors on suicide has been examined in many studies. Few of them, however, have explored these associations from a spatial perspective, especially in assessing the association between meteorological factors and suicide. This study examined the association of meteorological and socio-demographic factors with suicide across small areas over different time periods. Methods Suicide, population and socio-demographic data (e.g., population of Aboriginal and Torres Strait Islanders (ATSI), and unemployment rate (UNE) at the Local Government Area (LGA) level were obtained from the Australian Bureau of Statistics for the period of 1986 to 2005. Information on meteorological factors (rainfall, temperature and humidity) was supplied by Australian Bureau of Meteorology. A Bayesian Conditional Autoregressive (CAR) Model was applied to explore the association of socio-demographic and meteorological factors with suicide across LGAs. Results In Model I (socio-demographic factors), proportion of ATSI and UNE were positively associated with suicide from 1996 to 2000 (Relative Risk (RR)ATSI = 1.0107, 95% Credible Interval (CI): 1.0062-1.0151; RRUNE = 1.0187, 95% CI: 1.0060-1.0315), and from 2001 to 2005 (RRATSI = 1.0126, 95% CI: 1.0076-1.0176; RRUNE = 1.0198, 95% CI: 1.0041-1.0354). Socio-Economic Index for Area (SEIFA) and IND, however, had negative associations with suicide between 1986 and 1990 (RRSEIFA = 0.9983, 95% CI: 0.9971-0.9995; RRATSI = 0.9914, 95% CI: 0.9848-0.9980). Model II (meteorological factors): a 1°C higher yearly mean temperature across LGAs increased the suicide rate by an average by 2.27% (95% CI: 0.73%, 3.82%) in 1996–2000, and 3.24% (95% CI: 1.26%, 5.21%) in 2001–2005. The associations between socio-demographic factors and suicide in Model III (socio-demographic and meteorological factors) were similar to those in Model I; but, there is no substantive association between climate and suicide in Model III. Conclusions Proportion of Aboriginal and Torres Strait Islanders, unemployment and temperature appeared to be statistically associated with of suicide incidence across LGAs among all selected variables, especially in recent years. The results indicated that socio-demographic factors played more important roles than meteorological factors in the spatial pattern of suicide incidence.

Barriers, drivers and enablers for transitioning towards innovation in the Australian water sector

The Australian water sector needs to adapt to effectively deal with the impacts of climate change on its systems. Challenges as a result of climate change include increasingly extreme occurrences of weather events including flooding and droughts (Pittock, 2011). In response to such challenges, the National Water Commission in Australia has identified the need for the water sector to transition towards being readily adaptable and able to respond to complex needs for a variety of supply and demand scenarios (National Water Commission, 2013). To successfully make this transition, the sector will need to move away from business as usual, and proactively pursue and adopt innovative approaches and technologies as a means to successfully address the impacts of climate change on the Australian water sector. In order to effectively respond to specific innovation challenges related to the sector, including climate change, it is first necessary to possess a foundational understanding about the key elements related to innovation in the sector. This paper presents this base level understanding, identifying the key barriers, drivers and enablers, and elements for innovative practise in the water sector. After initially inspecting the literature around the challenges stemming from climate change faced by the sector, the paper then examines the findings from the initial two rounds of a modified Delphi study, conducted with experts from the Australian water sector, including participants from research, government and industry backgrounds. The key barriers, drivers and enablers for innovation in the sector identified during the initial phase of the study formed the basis for the remainder of the investigation. Key elements investigated were: barriers – scepticism, regulation systems, inconsistent policy; drivers – influence of policy, resource scarcity, thought leadership; enablers – framing the problem, effective regulations, community acceptance. There is a convincing argument for the water sector transitioning to a more flexible, adaptive and responsive system in the face of challenges resulting from climate change. However, without first understanding the challenges and opportunities around making this transition, the likelihood of success is limited. For that reason, this paper takes the first step in understanding the elements surrounding innovation in the Australian water sector.

Affordances of ICTs: an environmental study of a French language unit offered at university level

This project investigates the integration of Information Communication Technologies (ICTs) into educational settings by closely looking at the uptake of the perceived affordances offered by ICTs by students enrolled in a French language course at Queensland University of Technology. This cross-disciplinary research uses the theoretical concepts of: Ecological Psychology (Gibson, 1979; Good, 2007; Reed, 1996); Ecological Linguistics (Greeno, 1994; Leather & van Dam, 2003; van Lier 2000, 2003, 2004a, 2004b); Design (Norman, 1988, 1999); Software Design/ Human-Computer Interaction (Hartson, 2003; McGrenere & Ho, 2000); Learning Design (Conole & Dyke, 2004a, 2004b; Laurillard et al. 2000;); Education (Kirschner, 2002; Salomon, 1993; Wijekumar et al., 2006) and Educational Psychology (Greeno, 1994). In order to investigate this subject, the following research questions, rooted in the theoretical foundations of the thesis, were formulated: (1) What are the learners’ attitudes towards the ICT tools used in the project?; (2) What are the affordances offered by ICTs used in a specific French language course at university level from the perspective of the teacher and from the perspective of language learners?; (3) What affordances offered by ICT tools used by the teacher within the specific teaching and learning environment have been taken up by learners?; and (4) What factors influence the uptake by learners of the affordances created by ICT tools used by the teacher within the specific teaching and learning environment? The teaching phase of this project, conducted between 2006 and 2008, used Action Research procedures (Hopkins, 2002; McNiff & Whitehead, 2002; van Lier 1994) as a research framework. The data were collected using the following combination of qualitative and quantitative methods: (1) questionnaires administered to students (Hopkins, 2002; McNiff & Whitehead, 2002) using Likert-scale questions, open questions, yes/no questions; (2) partnership classroom observations of research participants conducted by Research Participant Advocates (Hopkins, 2002; McNiff & Whitehead, 2002); and (3) a focus group with volunteering students who participated in the unit (semi-structured interview) (Hopkins, 2002; McNiff & Whitehead, 2002). The data analysis confirms the importance of a careful examination of the teaching and learning environment and reveals differences in the ways in which the opportunities for an action offered by the ICTs were perceived by teacher and students, which impacted on the uptake of affordances. The author applied the model of affordance, as described by Good (2007), to explain these differences and to investigate their consequences. In conclusion, the teacher-researcher considers that the discrepancies in perceiving the affordances result from the disparities between the frames of reference and the functional contexts of the teacher-researcher and students. Based on the results of the data analysis, a series of recommendations is formulated supporting calls for careful analysis of frames of reference and the functional contexts of all participants in the learning and teaching process. The author also suggests a modified model of affordance, outlining the important characteristics of its constituents.

Environmental contamination and hospital-acquired infection: factors that are easily overlooked

There is an ongoing debate about the reasons for and factors contributing to healthcare-associated infection (HAI). Different solutions have been proposed over time to control the spread of HAI, with more focus on hand hygiene than on other aspects such as preventing the aerial dissemination of bacteria. Yet, it emerges that there is a need for a more pluralistic approach to infection control; one that reflects the complexity of the systems associated with HAI and involves multidisciplinary teams including hospital doctors, infection control nurses, microbiologists, architects, and engineers with expertise in building design and facilities management. This study reviews the knowledge base on the role that environmental contamination plays in the transmission of HAI, with the aim of raising awareness regarding infection control issues that are frequently overlooked. From the discussion presented in the study, it is clear that many unknowns persist regarding aerial dissemination of bacteria, and its control via cleaning and disinfection of the clinical environment. There is a paucity of good-quality epidemiological data, making it difficult for healthcare authorities to develop evidence-based policies. Consequently, there is a strong need for carefully designed studies to determine the impact of environmental contamination on the spread of HAI.

Strength properties of composite clay balls containing additives from industry wastes as new filter media in water treatment

Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to 1100 0C at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.

Appendix 8: Quantifying the effects of environmental factors on catch rates in South-East fisheries: 1986-2006

The collection of basic environmental data by industry members was successful and offers a way of overcoming the problems associated with differences in scale between the environment and fisheries datasets. A simple method of collecting environmental data was developed that was only a small time burden on skippers, yet has the potential to provide very useful information on the same scale as the catch and effort data recorded in the logbooks. The success of this trial was aided by the natural interest of fishers to learn more about the environment in which they fish. The archival temperature-depth tags chosen proved robust, reliable and easy to use. While the use of large scale environmental data may not yield significant improvements in stock assessments for most SESSF species, fine-scale data collected from selected vessels using methods developed during this project may, in the longer term, be useful for incorporation into CPUE standardisations in the future...

Exploring Environmental Stewardship Through Data-Driven Practices

What potential do artists working with environmental data in public space have for producing new forms of engagement with local environmental conditions? Operating on the edge of heavy bureaucracy, these types of data-driven artistic experiments probe the politics of environmental metrics and explore methods of engaging audiences with issues of environmental health. This discussion considers a small collection of cases studies representative of this growing field of practice. These are works by Natalie Jeremijenko and The Living, Tega Brain and Keith Deverell. The case studies considered are examples of strategic design, works that soften, reveal and potentially shift existing regulations and bureaucratic norms. In doing so they open up new possibilities and questions as to what the smart city is and how it might be realised.