Aerosol mass spectrometric analysis of the chemical composition of non- refractory PM1 samples from school environments in Brisbane, Australia

Long term exposure to vehicle emissions has been associated with harmful health effects. Children are amongst the most susceptible group and schools represent an environment where they can experience significant exposure to vehicle emissions. However, there are limited studies on children’s exposure to vehicle emissions in schools. The aim of this study was to quantify the concentration of organic aerosol and in particular, vehicle emissions that children are exposed to during school hours. Therefore an Aerodyne compact time-of-flight aerosol mass spectrometer (TOF-AMS) was deployed at five urban schools in Brisbane, Australia. The TOF-AMS enabled the chemical composition of the non- refractory (NR-PM1) to be analysed with a high temporal resolution to assess the concentration of vehicle emissions and other organic aerosols during school hours. At each school the organic fraction comprised the majority of NR-PM1 with secondary organic aerosols as the main constitute. At two of the schools, a significant source of the organic aerosol (OA) was slightly aged vehicle emissions from nearby highways. More aged and oxidised OA was observed at the other three schools, which also recorded strong biomass burning influences. Primary emissions were found to dominate the OA at only one school which had an O:C ratio of 0.17, due to fuel powered gardening equipment used near the TOF-AMS. The diurnal cycle of OA concentration varied between schools and was found to be at a minimum during school hours. The major organic component that school children were exposed to during school hours was secondary OA. Peak exposure of school children to HOA occurred during school drop off and pick up times. Unless a school is located near major roads, children are exposed predominately to regional secondary OA as opposed to local emissions during schools hours in urban environments.

Spatial variation of particle number concentration in school microscale environments and its impact on exposure assessment

It has not yet been established whether the spatial variation of particle number concentration (PNC) within a microscale environment can have an effect on exposure estimation results. In general, the degree of spatial variation within microscale environments remains unclear, since previous studies have only focused on spatial variation within macroscale environments. The aims of this study were to determine the spatial variation of PNC within microscale school environments, in order to assess the importance of the number of monitoring sites on exposure estimation. Furthermore, this paper aims to identify which parameters have the largest influence on spatial variation, as well as the relationship between those parameters and spatial variation. Air quality measurements were conducted for two consecutive weeks at each of the 25 schools across Brisbane, Australia. PNC was measured at three sites within the grounds of each school, along with the measurement of meteorological and several other air quality parameters. Traffic density was recorded for the busiest road adjacent to the school. Spatial variation at each school was quantified using coefficient of variation (CV). The portion of CV associated with instrument uncertainty was found to be 0.3 and therefore, CV was corrected so that only non-instrument uncertainty was analysed in the data. The median corrected CV (CVc) ranged from 0 to 0.35 across the schools, with 12 schools found to exhibit spatial variation. The study determined the number of required monitoring sites at schools with spatial variability and tested the deviation in exposure estimation arising from using only a single site. Nine schools required two measurement sites and three schools required three sites. Overall, the deviation in exposure estimation from using only one monitoring site was as much as one order of magnitude. The study also tested the association of spatial variation with wind speed/direction and traffic density, using partial correlation coefficients to identify sources of variation and non-parametric function estimation to quantify the level of variability. Traffic density and road to school wind direction were found to have a positive effect on CVc, and therefore, also on spatial variation. Wind speed was found to have a decreasing effect on spatial variation when it exceeded a threshold of 1.5 (m/s), while it had no effect below this threshold. Traffic density had a positive effect on spatial variation and its effect increased until it reached a density of 70 vehicles per five minutes, at which point its effect plateaued and did not increase further as a result of increasing traffic density.

Rebuilding housing after a disaster : factors for failure

Unlike most normal construction projects, post-disaster housing projects are diverse in nature, have unique socio-cultural and economical requirements, and are extremely dynamic and thus necessitate a meaningful and dynamic response. Post-disaster reconstruction practices that lack a strategy compatible with the severity of disaster, community culture, socio-economic requirements, environmental condition, government legislations, and technical and technological situations, often fail to operate and respond effectively to the needs of the wider affected population. Factors that frequently pose real threats to the eventual success of reconstruction projects are rarely given appropriate consideration when designing such projects. Research into past reconstruction practices has shown that ignoring these factors altogether or failing to give them meaningful consideration can affect housing reconstruction projects. In other words, they either miss their targets altogether or undergo serious modifications after their occupancy, subsequently resulting in an overall loss of project resources. This article touches upon the common factors that negatively impact the outcome of such projects.

Using management objectives to specify management information systems : a contribution to MIS success

Data warehouse projects, today, are in an ambivalent situation. On the one hand, data warehouses are critical for a company’s success and various methodological and technological tools are sophisticatedly developed to implement them. On the other hand, a significant amount of data warehouse projects fails due to non-technical reasons such as insufficient management support or in-corporative employees. But management support and user participation can be increased dramatically with specification methods that are understandable to these user groups. This paper aims at overcoming possible non-technical failure reasons by introducing a user-adequate specification approach within the field of management information systems.

Provision of customer knowledge to supply chains

Knowledge about customers is vital for supply chains in order to ensure customer satisfaction. In an ideal supply chain environment, supply chain partners are able to perform planning tasks collaboratively, because they share information. However, customers are not always able or willing to share information with their suppliers. End consumers, on the one hand, do not usually provide a retail company with demand information. On the other hand, industrial customers might consciously hide information. Wherever a supply chain is not provided with demand forecast information, it needs to derive these demand forecasts by other means. Customer Relationship Management provides a set of tools to overcome informational uncertainty. We show how CRM and SCM information can be integrated on the conceptual as well as technical levels in order to provide supply chain managers with relevant information.

Damage assessment in reinforced concrete flexural members using modal strain energy based method

Damage assessment (damage detection, localization and quantification) in structures and appropriate retrofitting will enable the safe and efficient function of the structures. In this context, many Vibration Based Damage Identification Techniques (VBDIT) have emerged with potential for accurate damage assessment. VBDITs have achieved significant research interest in recent years, mainly due to their non-destructive nature and ability to assess inaccessible and invisible damage locations. Damage Index (DI) methods are also vibration based, but they are not based on the structural model. DI methods are fast and inexpensive compared to the model-based methods and have the ability to automate the damage detection process. DI method analyses the change in vibration response of the structure between two states so that the damage can be identified. Extensive research has been carried out to apply the DI method to assess damage in steel structures. Comparatively, there has been very little research interest in the use of DI methods to assess damage in Reinforced Concrete (RC) structures due to the complexity of simulating the predominant damage type, the flexural crack. Flexural cracks in RC beams distribute non- linearly and propagate along all directions. Secondary cracks extend more rapidly along the longitudinal and transverse directions of a RC structure than propagation of existing cracks in the depth direction due to stress distribution caused by the tensile reinforcement. Simplified damage simulation techniques (such as reductions in the modulus or section depth or use of rotational spring elements) that have been extensively used with research on steel structures, cannot be applied to simulate flexural cracks in RC elements. This highlights a big gap in knowledge and as a consequence VBDITs have not been successfully applied to damage assessment in RC structures. This research will address the above gap in knowledge and will develop and apply a modal strain energy based DI method to assess damage in RC flexural members. Firstly, this research evaluated different damage simulation techniques and recommended an appropriate technique to simulate the post cracking behaviour of RC structures. The ABAQUS finite element package was used throughout the study with properly validated material models. The damaged plasticity model was recommended as the method which can correctly simulate the post cracking behaviour of RC structures and was used in the rest of this study. Four different forms of Modal Strain Energy based Damage Indices (MSEDIs) were proposed to improve the damage assessment capability by minimising the numbers and intensities of false alarms. The developed MSEDIs were then used to automate the damage detection process by incorporating programmable algorithms. The developed algorithms have the ability to identify common issues associated with the vibration properties such as mode shifting and phase change. To minimise the effect of noise on the DI calculation process, this research proposed a sequential order of curve fitting technique. Finally, a statistical based damage assessment scheme was proposed to enhance the reliability of the damage assessment results. The proposed techniques were applied to locate damage in RC beams and slabs on girder bridge model to demonstrate their accuracy and efficiency. The outcomes of this research will make a significant contribution to the technical knowledge of VBDIT and will enhance the accuracy of damage assessment in RC structures. The application of the research findings to RC flexural members will enable their safe and efficient performance.

Environmental rating tools and residential land development in Australia

EnviroDevelopment National Board of Management board member, Lyndall Bryant, has recently conducted research into environmental rating tools and how their environmental benefits within residential land developments can be quantified.

Empowering the school community for change : an evaluation of participation in the Ashgrove Healthy School Environment Project

The purpose of this study was to evaluate aspects of participation in a participatory action research project, the Ashgrove Healthy School Environment Project. Participatory action research is a form of research that creates change as an explicit part of the research process and requires the active participation of those by and for whom the research is being conducted. This study arose from concems by this researcher, who is also a co-facilitator of the project, that levels of participation were not as extensive as one might have hoped and that this seemingly low level would have a negative impact on the continuing participation of those already involved. Specifically. this evaluation sought to uncover the reasons that prompted participation, to identify structural barriers to initial involvement and to uncover participants' perceptions of the process, including barriers and opportunities. It also sought to record evidence of any shift in decision making and to draw implications about the findings that could assist the project, the school, other schools and the wider community. This evaluation involved focus group discussions and interviews with participants actively involved in the school project. The purpose was to uncover their views, feelings and perceptions about their participation and the participatory processes in use generally. It also included some examination of school documents and newsletters and as also drawn on the reflections of this 'insider' researcher, based on two years of involvement in facilitating the project. The findings that emerge from this study are heartening. Rather than feeling anxious about the long-term sustainability of the project, this researcher now feels more confident about its achievements, both in terms of the changes that have occurred in the school and about the participatory processes and levels of participation. Whilst the evaluation has identified a number of barriers, both institutional, personal and project related, it has also identified several key factors that serve to promote participation.

Bargara Pasturage Reserve : Future Visions

Bargara Pasturage Reserve: Future Visions This exhibition showcases the work of Postgraduate Landscape Architecture and final year Undergraduate Civil and Environmental Engineering students in response to issues of sustainability in a coastal wetland known as the Bargara Pasturage Reserve; an exemplar of the many issues facing sensitive coastal places in Queensland today. The 312ha Pasturage Reserve at Bargara is the only biofilter between the pressures of Bargara’s urban and tourism expansion, surrounding sugarcane farming, and the Great Sandy Marine Park, including the largest concentration of nesting marine turtles on the eastern Australian mainland. This ephemeral wetland, while struggling to fulfil its coastal biofiltration function, is also in high demand for passive recreation, and the project partners’ priorities were to meet both of these challenges. The students were required to plan and design for the best balance possible amongst, but not limited to: wetland and coastal ecological health, enhancement of cultural heritage and values, sustainable urban development, and local economic health. To understand these challenges, QUT staff and students met with partners, visited and analysed the Pasturage Reserve, spent time in and around Bargara talking to locals and inviting dialogue with Indigenous representatives and the South Sea Islander community. We then went home to Brisbane to undertake theoretical and technical research, and then worked to produce 11 Strategic Plans, 2 Environmental Management Plans and 33 Detailed Designs. One group of students analysed the Bargara coastal landscape as an historical and ongoing series of conversations between ecological systems, cultural heritage, community and stakeholders. Another group identified the landscape as neither ‘urban,’ ‘rural,’ nor ‘natural,’ instead identifying it metaphorically as a series of layered thematic ‘fields’ such as water, conservation, reconciliation, and educational fields. These landscape analyses became the organising mechanisms for strategic planning. An outstanding Strategic Plan was produced by Zhang, Lemberg and Jensen, entitled Metanoia, which means to ‘make a change as the result of reflection on values’. Three implementation phases of “flow”, “flux”, and “flex” span twenty-five years, and present a vision a coastal and marine research and conservation hub, with a focus on coastal wetland function, turtle habitat and coral reef conservation. An Environmental Management Plan by Brand and Stickland focuses on protecting and improving wetland biodiversity and habitat quality, and increasing hydrological and water quality function; vital in a coastal area of such high conservation value. After the planning phase, students individually developed detailed design proposals responsive to their plans. From Metanoia, Zhang concentrated on wetland access and interpretation, proposing four focal places to form the nucleus of a wider pattern of connectivity, and to encourage community engagement with coastal environmental management and education. Jensen tackled the thorny issue of coastal urban development, proposing a sensitive staged eco-village model which maintains both ecological and recreational connectivity between the wetland and the marine environment. This project offered QUT’s partners many innovative options to inform their future planning. BSC, BMRG and Oceanwatch Australia are currently engaged in the investigation of on-ground opportunities drawing on these options.

Child sexual abuse prevention education : A review of school policy and curriculum provision in Australia

The past four decades have seen increasing public and professional awareness of child sexual abuse. Congruent with public health approaches to prevention, efforts to eliminate child sexual abuse have inspired the emergence of prevention initiatives which can be provided to all children as part of their standard school curriculum. However, relatively little is known about the scope and nature of child sexual abuse prevention efforts in government school systems internationally. This paper assesses and compares the policies and curriculum initiatives for child sexual abuse prevention education in primary (elementary) schools across state and territory Departments of Education in Australia. Using publicly available electronic data, a deductive qualitative content analysis of policy and curriculum documents was undertaken to examine the characteristics of child sexual abuse prevention education in these school systems. It was found that the system-level provision of child sexual abuse prevention education occurs unevenly across state and territory jurisdictions. This results in the potential for substantial inequity in Australian children’s access to learning opportunities in child abuse prevention education as a part of their standard school curriculum. In this research, we have developed a strategy for generating a set of theoretically-sound empirical criteria that may be more extensively applied in comparative research about prevention initiatives internationally.

Critical success elements for the design and implementation of organisational e-learning

Organisations are engaging in e-learning as a mechanism for delivering flexible learning to meet the needs of individuals and organisations. In light of the increasing use and organisational investment in e-learning, the need for methods to evaluate the success of its design and implementation seems more important than ever. To date, developing a standard for the evaluation of e-learning appears to have eluded both academics and practitioners. The currently accepted evaluation methods for e-learning are traditional learning and development models, such as Kirkpatrick’s model (1976). Due to the technical nature of e-learning it is important to broaden the scope and consider other evaluation models or techniques, such as the DeLone and McLean Information Success Model, that may be applicable to the e-learning domain. Research into the use of e-learning courses has largely avoided considering the applicability of information systems research. Given this observation, it is reasonable to conclude that e-learning implementation decisions and practice could be overlooking useful or additional viewpoints. This research investigated how existing evaluation models apply in the context of organisational e-learning, and resulted in an Organisational E-learning success Framework, which identifies the critical elements for success in an e-learning environment. In particular this thesis highlights the critical importance of three e-learning system creation elements; system quality, information quality, and support quality. These elements were explored in depth and the nature of each element is described in detail. In addition, two further elements were identified as factors integral to the success of an e-learning system; learner preferences and change management. Overall, this research has demonstrated the need for a holistic approach to e-learning evaluation. Furthermore, it has shown that the application of both traditional training evaluation approaches and the D&M IS Success Model are appropriate to the organisational e-learning context, and when combined can provide this holistic approach. Practically, this thesis has reported the need for organisations to consider evaluation at all stages of e-learning from design through to implementation.

School libraries, teacher-librarians and their contribution to student literacy development in Gold Coast schools

This is the first research focusing on Gold Coast school libraries and teacher- librarians. It presents a detailed picture of library provision and staffing at a representative group of 27 government and non-government schools at the Gold Coast. It shows links between employment of a teacher-librarian and higher NAPLAN reading and writing scores. And it presents the principals’ generally positive views about teacher-librarians’ contribution to reading and literacy at their schools. The findings respond in part to the recent government inquiry’s call (House of Representatives, 2011) for research about the current staffing of school libraries in Australia, and the influence of school libraries and teacher-librarians on students’ literacy and learning outcomes. While the study has focused on a relatively small group of school libraries, it has produced a range of significant outcomes: • An extensive review of international and Australian research showing impacts of school libraries and teacher-librarians on students’ literacy and learning outcomes • Findings consistent with international research showing: - An inverse relationship between lower student to EFT library staff ratio and higher school NAPLAN scores for reading and writing - Schools that employ a teacher-librarian tend to achieve school NAPLAN scores for respective year levels that are higher than the national mean It is anticipated that the study’s findings will be of interest to education authorities, school leadership teams, teacher-librarians, teachers and researchers. The findings provide evidence to: • inform policy development and strategic planning for school libraries that respond to the literacy development needs of 21st century learners • inform school-based management of school libraries • inform curriculum development and teacher-librarian practice • support further collaborative research on a State or national level • enhance conceptual understandings about relationship(s) between school libraries, teacher-librarians and literacy/information literacy development • support advocacy about school libraries, teacher-librarians and their contribution to literacy development and student learning in Australian schools SLAQ President Toni Leigh comments: “It is heartening to see findings which validate the critical role teacher-librarians play in student literacy development and the positive correlation of higher NAPLAN scores and schools with a qualified teacher-librarian. Also encouraging is the high percentage of school principals who recognise the necessity of a well resourced school library and the positive influence of these libraries on student literacy”. This research arises from a research partnership between School Library Association of Queensland (SLAQ) and Children and Youth Research Centre, QUT. Lead researcher: Dr Hilary Hughes, Children and Youth Research Centre, QUT Research assistants: Dr Hossein Bozorgian, Dr Cherie Allan, Dr Michelle Dicinoski, QUT SLAQ Research Reference Group: Toni Leigh, Marj Osborne, Sally Fraser, Chris Kahl and Helen Reynolds Reference: House of Representatives. (2011). School libraries and teacher librarians in 21st century Australia. Canberra: Commonwealth of Australia. http://www.aph.gov.au/Parliamentary_Business/Committees/House_of_Representatives_Committees?url=ee/schoollibraries/report.htm

School-based first aid training and the implications for traffic injury prevention : a randomised controlled trial

Adolescent injury remains a significant public health concern and is often the result of at-risk transport related behaviours. When a person is injured actions taken by bystanders are of crucial importance and timely first aid appears to reduce the severity of some injuries (Hussain & Redmond, 1994). Accordingly, researchers have suggested that first aid training should be more widely available as a potential strategy to reduce injury (Lynch et al., 2006). Further research has identified schools as an ideal setting for learning first aid skills as a means of injury prevention (Maitra, 1997). The current research examines the implications of school based first aid training for young adolescents on injury prevention, particularly relating to transport injuries. First aid training was integrated with peer protection and school connectedness within the Skills for Preventing Injury in Youth (SPIY) program (Buckley & Sheehan, 2009) and evaluated to determine if there was a reduction in the likelihood of transport related injuries at six months post-intervention. In Queensland, Australia, 35 high schools were recruited and randomly assigned to intervention and control conditions in early April 2012. A total of 2,000 Year nine students (mean age 13.5 years, 39% male) completed surveys six months post-intervention in November 2012. Analyses will compare the intervention students with control group students who self-reported i) first aid training with a teacher, professional or other adult and ii) no first aid in the preceding six months. Using the Extended Adolescent Injury Checklist (E-AIC) (Chapman, Buckley & Sheehan, 2011) the transport related injury experiences included being injured while “riding as a passenger in a car”, “driving a car off road” and “riding a bicycle”. It is expected that students taught first aid within SPIY will report significantly fewer transport related injuries in the previous three months, compared to the control groups described above. Analyses will be conducted separately for sex and socio-economic class of schools. Findings from this study will provide insight into the value of first aid in adolescent injury prevention and provide evidence as to whether teaching first aid skills within a school based health education curriculum has traffic safety implications.

Every One, Every Day

Creative Statement: “There are those who see Planet Earth as a gigantic living being, one that feeds and nurtures humanity and myriad other species – an entity that must be cared for. Then there are those who see it as a rock full of riches to be pilfered heedlessly in a short-term quest for over-abundance. This ‘cradle to grave’ mentality, it would seem, is taking its toll (unless you’re a virulent disbeliever in climate change). Why not, ask artists Priscilla Bracks and Gavin Sade, take a different approach? To this end they have set out on a near impossible task; to visualise the staggering quantity of carbon produced by Australia every year. Their eerie, glowing plastic cube resembles something straight out of Dr Who or The X Files. And, like the best science fiction, it has technical realities at its heart. Every One, Every Day tangibly illustrates our greenhouse gas output – its 27m3 volume is approximately the amount of green-house gas emitted per capita, daily. Every One, Every Dayis lit by an array of LED’s displaying light patterns representing energy use generated by data from the Australian Energy Market. Every One, Every Day was formed from recycled, polyethylene – used milk bottles – ‘lent’ to the artists by a Visy recycling facility. At the end of the Vivid Festival this plastic will be returned to Visy, where it will re-enter the stream of ‘technical nutrients.’ Could we make another world? One that emulates the continuing cycles of nature? One that uses our ‘technical nutrients’ such as plastic and steel in continual cycles, just like a deciduous tree dropping leaves to compost itself and keep it’s roots warm and moist?” (Ashleigh Crawford. Melbourne – April, 2013) Artistic Research Statement: The research focus of this work is on exploring how to represent complex statistics and data at a human scale, and how produce a work where a large percentage of the materials could be recycled. The surface of Every One, Every Day is clad in tiles made from polyethylene, from primarily recycled milk bottles, ‘lent’ to the artists by the Visy recycling facility in Sydney. The tiles will be returned to Visy for recycling. As such the work can be viewed as an intervention in the industrial ecology of polyethylene, and in the process demonstrates how to sustain cycles of technical materials – by taking the output of a recycling facility back to a manufacturer to produce usable materials. In terms of data visualisation, Every One, Every Day takes the form of a cube with a volume of 27 cubic meters. The annual per capita emissions figures for Australia are cited as ranging between 18 to 25 tons. Assuming the lower figure, 18tons per capital annually, the 27 cubic meters represents approximately one day per capita of CO2 emissions – where CO2 is a gas at 15C and 1 atmosphere of pressure. The work also explores real time data visualisation by using an array of 600 controllable LEDs inside the cube. Illumination patterns are derived from a real time data from the Australian Energy Market, using the dispatch interval price and demand graph for New South Wales. The two variables of demand and price are mapped to properties of the illumination - hue, brightness, movement, frequency etc. The research underpinning the project spanned industrial ecology to data visualization and public art practices. The result is that Every One, Every Day is one of the first public artworks that successfully bring together materials, physical form, and real time data representation in a unified whole.