Source characterisation of urban road surface pollutants for enhanced water quality predictions

This study developed a comprehensive research methodology for identification and quantification of sources responsible for pollutant build-up and wash-off from urban road surfaces. The study identified soil and asphalt wear, and non-combusted diesel fuel as the most influential sources for metal and hydrocarbon pollution respectively. The study also developed mathematical models to relate contributions from identified sources to underlying site specific factors such as land use and traffic. Developed mathematical model will play a key role in urban planning practices, enabling the implementation of effective water pollution control strategies.

Exploring urban consumers’ attitudes and intentions to purchase local food in Chile

Although local food consumption is growing in importance there remains a lack of research addressing local food consumption preferences in less-developed countries. This paper aims to examine the drivers of local food purchase intentions for Chilean consumers. A model of local food behavioral intention was developed from consumer behavior theory. The model was tested using structural equation modeling with data from Chilean shoppers located in Santiago (n=283). The analysis revealed that Chilean consumers are willing to purchase local food based on their positive attitude towards buying local food and their feelings of connectedness with the environment, but not because they have a desire to support local businesses. These findings have implications for retailers, marketers and food producers.

Influence of traffic characteristics on polycyclic aromatic hydrocarbon build-up on urban road surfaces

Traffic is one of the prominent sources of polycyclic aromatic hydrocarbons (PAHs) and road surfaces are the most critical platform for stormwater pollution. Build-up of pollutants on road surfaces was the focus of this research study. The study found that PAHs build-up on road surfaces primarily originate from traffic activities, specifically gasoline powered vehicles. Other sources such as diesel vehicles, industrial oil combustion and incineration were also found to contribute to the PAH build-up. Additionally, the study explored the linkages between concentrations of PAHs and traffic characteristics such as traffic volume, vehicle mix and traffic flow. While traffic congestion was found to be positively correlated with 6- ring and 5- ring PAHs in road build-up, it was negatively correlated with 3-ring and 4 ring PAHs. The absence of positive correlation between 3-ring and 4-ring PAHs and traffic parameters is attributed to the propensity of these relatively volatile PAHs to undergo re-suspension and evaporation. The outcomes of this study are expected to contribute effective transport and land use planning for the prevention of PAH pollution in the urban environment.

Smart cities: An effective urban development and management model?

It is argued that the smart cities model promise solutions to fuel sustainable development and a high quality of life with a wise management of natural resources, through participatory action and engagement. The paper provides a critical review of this model and application attempts of smart urban technologies in contemporary cities by particularly looking into emerging practices of ubiquitous eco-cities as exemplar smart cities initiatives. Through a thorough review of literature and best practices on the smart cities model, this paper attempts to address the research question of whether smart cities model is just another fashionable city brand or an effective urban development and management model to solve the problems of our cities. The findings shed light on urban planning and development considerations for the integration of smart urban technologies and their possible implications in shaping up of the built environment to produce prosperous and sustainable urban futures.

Urban Aboriginal and Torres Strait Islander children's exposure to stressful events : a cross sectional study

Objectives To determine the frequency and types of stressful events experienced by urban Aboriginal and Torres Strait Islander children, and to explore the relationship between these experiences and the children’s physical health and parental concerns about their behaviour and learning ability. Design, setting and participants Cross-sectional study of Aboriginal and Torres Strait Islander children aged ≤ 14 years presenting to an urban Indigenous primary health care service in Brisbane for annual child health checks between March 2007 and March 2010. Main outcome measures Parental or carer report of stressful events ever occurring in the family that may have affected the child. Results Of 344 participating children, 175 (51%) had experienced at least one stressful event. Reported events included the death of a family member or close friend (40; 23%), parental divorce or separation (28; 16%), witness to violence or abuse (20; 11%), or incarceration of a family member (7; 4%). These children were more likely to have parents or carers concerned about their behaviour (P < 0.001) and to have a history of ear (P < 0.001) or skin (P = 0.003) infections. Conclusions Children who had experienced stressful events had poorer physical health and more parental concern about behavioural issues than those who had not. Parental disclosure in the primary health care setting of stressful events that have affected the child necessitates appropriate medical, psychological or social interventions to ameliorate both the immediate and potential lifelong negative impact. However, treating the impact of stressful events is insufficient without dealing with the broader political and societal issues that result in a clustering of stressful events in the Aboriginal and Torres Strait Islander population.

MIMO enhanced slotted cooperation in urban vehicular networks

The requirement of isolated relays is one of the prime obstacles in utilizing sequential slotted cooperative protocols for Vehicular Ad-hoc Networks (VANET). Significant research advancement has taken place to improve the diversity multiplexing trade-off (DMT) of cooperative protocols in conventional mobile networks without much attention on vehicular ad-hoc networks. We have extended the concept of sequential slotted amplify and forward (SAF) protocols in the context of urban vehicular ad-hoc networks. Multiple Input Multiple Output (MIMO) reception is used at relaying vehicular nodes to isolate the relays effectively. The proposed approach adds a pragmatic value to the sequential slotted cooperative protocols while achieving attractive performance gains in urban VANETs. We have analysed the DMT bounds and the outage probabilities of the proposed scheme. The results suggest that the proposed scheme can achieve an optimal DMT similar to the DMT upper bound of the sequential SAF. Furthermore, the outage performance of the proposed scheme outperforms the SAF protocol by 2.5 dB at a target outage probability of 10-4.

Empirical modelling of the relationship between bus and car speeds on signalised urban networks

Vehicle speed is an important attribute for analysing the utility of a transport mode. The speed relationship between multiple modes of transport is of interest to traffic planners and operators. This paper quantifies the relationship between bus speed and average car speed by integrating Bluetooth data and Transit Signal Priority data from the urban network in Brisbane, Australia. The method proposed in this paper is the first of its kind to relate bus speed and average car speed by integrating multi-source traffic data in a corridor-based method. Three transferable regression models relating not-in-service bus, in-service bus during peak periods, and in-service bus during off-peak periods with average car speed are proposed. The models are cross-validated and the interrelationships are significant.

Estimation of inhaled ultrafine particle surface area dose for urban environments

There is considerable scientific interest in personal exposure to ultrafine particles. Owing to their small size, these particles are able to penetrate deep into the lungs, where they may cause adverse respiratory, pulmonary and cardiovascular health effects. This article presents Bayesian hierarchical models for estimating and comparing inhaled particle surface area in the lung.

Investigation into chemistry of new particle formation and growth in subtropical urban environment

The role of different chemical compounds, particularly organics, involved in the new particle formation (NPF) and its consequent growth are not fully understood. Therefore, this study was conducted to investigate the chemistry of aerosol particles during NPF events in an urban subtropical environment. Aerosol chemical composition was measured along with particle number size distribution (PNSD) and several other air quality parameters at five sites across an urban subtropical environment. An Aerodyne compact Time-of-Flight Aerosol Mass Spectrometer (c-TOF-AMS) and a TSI Scanning Mobility Particle Sizer (SMPS) measured aerosol chemical composition and PNSD, respectively. Five NPF events, with growth rates in the range 3.3-4.6 nm, were detected at two sites. The NPF events happened on relatively warmer days with lower humidity and higher solar radiation. Temporal percent fractions of nitrate, sulphate, ammonium and organics were modelled using the Generalised Additive Model (GAM), with a basis of penalised spline. Percent fractions of organics increased after the NPF events, while the mass fraction of ammonium and sulphate decreased. This uncovered the important role of organics in the growth of newly formed particles. Three organic markers, factors f43, f44 and f57, were calculated and the f44 vs f43 trends were compared between nucleation and non-nucleation days. f44 vs f43 followed a different pattern on nucleation days compared to non-nucleation days, whereby f43 decreased for vehicle emission generated particles, while both f44 and f43 decreased for NPF generated particles. It was found for the first time that vehicle generated and newly formed particles cluster in different locations on f44 vs f43 plot and this finding can be used as a tool for source apportionment of measured particles.

Process variability of pollutant build-up on urban road surfaces

Knowledge of the pollutant build-up process is a key requirement for developing stormwater pollution mitigation strategies. In this context, process variability is a concept which needs to be understood in-depth. Analysis of particulate build-up on three road surfaces in an urban catchment confirmed that particles <150µm and >150µm have characteristically different build-up patterns, and these patterns are consistent over different field conditions. Three theoretical build-up patterns were developed based on the size-fractionated particulate build-up patterns, and these patterns explain the variability in particle behavior and the variation in particle-bound pollutant load and composition over the antecedent dry period. Behavioral variability of particles <150µm was found to exert the most significant influence on the build-up process variability. As characterization of process variability is particularly important in stormwater quality modeling, it is recommended that the influence of behavioral variability of particles <150µm on pollutant build-up should be specifically addressed. This would eliminate model deficiencies in the replication of the build-up process and facilitate the accounting of the inherent process uncertainty, and thereby enhance the water quality predictions.

Refactoring Service Interface to Support Artefact-centric Service interaction

The growth of APIs and Web services on the Internet, especially through larger enterprise systems increasingly being leveraged for Cloud and software-as-a-service opportunities, poses challenges for improving the efficiency of integration with these services. Interfaces of enterprise systems are typically larger, more complex and overloaded, with single operations having multiple data entities and parameter sets, supporting varying requests, and reflecting versioning across different system releases, compared to fine-grained operations of contemporary interfaces. We propose a technique to support the refactoring of service interfaces by deriving business entities and their relationships. In this paper, we focus on the behavioural aspects of service interfaces, aiming to discover the sequential dependencies of operations (otherwise known as protocol extraction) based on the entities and relationships derived. Specifically, we propose heuristics according to these relationships, and in turn, deriving permissible orders in which operations are invoked. As a result of this, service operations can be refactored on business entity CRUD lines, with explicit behavioural protocols as part of an interface definition. This supports flexible service discovery, composition and integration. A prototypical implementation and analysis of existing Web services, including those of commercial logistic systems (Fedex), are used to validate the algorithms proposed through the paper.

Transdisciplinary approaches to urban computing

The research field of urban computing – defined as “the integration of computing, sensing, and actuation technologies into everyday urban settings and lifestyles” – considers the design and use of ubiquitous computing technology in public and shared urban environments. Its impact on cities, buildings, and spaces evokes innumerable kinds of change. Embedded into our everyday lived environments, urban computing technologies have the potential to alter the meaning of physical space, and affect the activities performed in those spaces. This paper starts a multi-themed discussion of various aspects that make up the, at times, messy and certainly transdisciplinary field of urban computing and urban informatics.

Interpretation of morphological data to inform design Bridge to Bridge: Ridge to Ridge urban design workshop

The importance of design practice informed by urban morphology has led to intensification in interest, signalled by the formation of the ISUF Research and Practice Task Force and voiced through several recent academic publications cognisant of this current debate, this paper reports on a recent urban design workshop at which morphology was set as one of the key themes. Initially planned to be programmed as a augmented concurrent event to the 2013 20th ISUF conference held in Brisbane, the two day Bridge to Bridge: Ridge to Ridge urban design workshop nevertheless took place the following month, and involved over one hundred design professionals and academics. The workshop sought to develop several key urban design principles and recommendations addressing a major government development proposal sited in the most important heritage precinct of the city. The paper will focus specifically on one of the nine groups, in which the design proposal was purposefully guided by morphological input. The discussion will examine the design outcomes and illicit review and feedback from participants, shedding critical light on the issues that arise from such a design approach.

Mini-Orb : A personal indoor climate preference feedback interface

The control of environmental factors in open-office environments, such as lighting and temperature is becoming increasingly automated. This development means that office inhabitants are losing the ability to manually adjust environmental conditions according to their needs. In this paper we describe the design, use and evaluation of MiniOrb, a system that employs ambient and tangible interaction mechanisms to allow inhabitants of office environments to maintain awareness of environmental factors, report on their own subjectively perceived office comfort levels and see how these compare to group average preferences. The system is complemented by a mobile application, which enables users to see and set the same sensor values and preferences, but using a screen-based interface. We give an account of the system’s design and outline the results of an in-situ trial and user study. Our results show that devices that combine ambient and tangible interaction approaches are well suited to the task of recording indoor climate preferences and afford a rich set of possible interactions that can complement those enabled by more conventional screen-based interfaces.