Process quality indicators targeting cognitive impairment to support quality of care for older people with cognitive impairment in emergency departments

Objectives The objective of this study was to develop process quality indicators (PQIs) to support the improvement of care services for older people with cognitive impairment in emergency departments (ED). Methods A structured research approach was taken for the development of PQIs for the care of older people with cognitive impairment in EDs, including combining available evidence with expert opinion (phase 1), a field study (phase 2), and formal voting (phase 3). A systematic review of the literature identified ED processes targeting the specific care needs of older people with cognitive impairment. Existing relevant PQIs were also included. By integrating the scientific evidence and clinical expertise, new PQIs were drafted and, along with the existing PQIs, extensively discussed by an advisory panel. These indicators were field tested in eight hospitals using a cohort of older persons aged 70 years and older. After analysis of the field study data (indicator prevalence, variability across sites), in a second meeting, the advisory panel further defined the PQIs. The advisory panel formally voted for selection of those PQIs that were most appropriate for care evaluation. Results In addition to seven previously published PQIs relevant to the care of older persons, 15 new indicators were created. These 22 PQIs were then field tested. PQIs designed specifically for the older ED population with cognitive impairment were only scored for patients with identified cognitive impairment. Following formal voting, a total of 11 PQIs were included in the set. These PQIs targeted cognitive screening, delirium screening, delirium risk assessment, evaluation of acute change in mental status, delirium etiology, proxy notification, collateral history, involvement of a nominated support person, pain assessment, postdischarge follow-up, and ED length of stay. Conclusions This article presents a set of PQIs for the evaluation of the care for older people with cognitive impairment in EDs. The variation in indicator triggering across different ED sites suggests that there are opportunities for quality improvement in care for this vulnerable group. Applied PQIs will identify an emergency services' implementation of care strategies for cognitively impaired older ED patients. Awareness of the PQI triggers at an ED level enables implementation of targeted interventions to improve any suboptimal processes of care. Further validation and utility of the indicators in a wider population is now indicated.

Effect and process evaluations of an early childhood obesity prevention intervention

The thesis develops a summative evaluation framework of the NOURISH Randomised Controlled Trial, and applies this to a selection of maternal feeding choice outcomes of the programme. The research is based on an ecological model of the complex set of factors that need to be acted upon to address childhood obesity. The novel approach extends the standard RCT effect evaluation, while also conducting an in-depth evaluation of the process of programme development and implementation. Research findings identify adaptations of intervention delivery that could improve its effectiveness and translatability, in a new cycle of the programme.

Analysis and improvement of a construction permit approval process: A teaching case for developing business process development capabilities, targeting developing nations

With the increasing competitiveness in global markets, many developing nations are striving to constantly improve their services in search for the next competitive edge. As a result, the demand and need for Business Process Management (BPM) in these regions is seeing a rapid rise. Yet there exists a lack of professional expertise and knowledge to cater to that need. Therefore, the development of well-structured BPM training/ education programs has become an urgent requirement for these industries. Furthermore, the lack of textbooks or other self-educating material, that go beyond the basics of BPM, further ratifies the need for case based teaching and related cases that enable the next generation of professionals in these countries. Teaching cases create an authentic learning environment where complexities and challenges of the ‘real world’ can be presented in a narrative, enabling students to evolve crucial skills such as problem analysis, problem solving, creativity within constraints as well as the application of appropriate tools (BPMN) and techniques (including best practices and benchmarking) within richer and real scenarios. The aim of this paper is to provide a comprehensive teaching case demonstrating the means to tackle any developing nation’s legacy government process undermined by inefficiency and ineffectiveness. The paper also includes thorough teaching notes The article is presented in three main parts: (i) Introduction - that provides a brief background setting the context of this paper, (ii) The Teaching Case, and (iii) Teaching notes.

Technology adoption as a multi-stage process

This study proposes that technology adoption be considered as a multi-stage process constituting several distinct stages. Using the Theory of Planned Behaviour (TPB), Ettlie’s adoption stages and by employing data gathered from 162 owners of Small and Medium-sized Enterprises (SMEs), our findings show that the determinants of the intention to adopt packaged software fluctuate significantly across adoption stages.

Design process

Christina Waterson interviews Queensland interior designer Marisha McAuliffe about her PhD research into process, and why some people are drawn to create.

Are there generalizable trends in the release of airborne synthetic clay nanoparticles from a jet milling process?

Despite recent efforts to assess the release of nanoparticles to the workplace during different nanotechnology activities, the existence of a generalizable trend in the particle release has yet to be identified. This study aimed to characterize the release of synthetic clay nanoparticles from a laboratory-based jet milling process by quantifying the variations arising from primary particle size and surface treatment of the material used, as well as the feed rate of the machine. A broad range of materials were used in this study, and the emitted particles mass (PM2.5) and number concentrations (PNC) were measured at the release source. Analysis of variance, followed by linear mixed-effects modeling, was applied to quantify the variations in PM2.5 and PNC of the released particles caused by the abovementioned factors. The results confirmed that using materials of different primary size and surface treatment affects the release of the particles from the same process by causing statistically-significant variations in PM2.5 and PNC. The interaction of these two factors should also be taken into account as it resulted in variations in the measured particles release properties. Furthermore, the feed rate of the milling machine was confirmed to be another influencing parameter. Although this research does not identify a specific pattern in the release of synthetic clay nanoparticles from the jet milling process generalizable to other similar settings, it emphasizes that each tested case should be handled individually in terms of exposure considerations.

An international comparison of the continuing professional development process (CPD) in Australia, New Zealand and the United Kingdom

Background: The Pharmacy Board of Australia stipulated that for renewal of registration, pharmacists must have accrued a minimum of 20 CPD credits over the 2010-11 registration years (1). Mandatory CPD is not new in Pharmacy. The UK and New Zealand have both established systems of CPD in recent years. The purpose of this study is to investigate established CPD processes in the UK and New Zealand with the view to making recommendations for the implementation of the CPD process in Australia. Objectives: To compare the acquisition and guidance on documentation of CPD credit points in Australia, New Zealand and the United Kingdom. Methodology: A comparative online search of the websites of each of the registering authorities was undertaken. Any practice standards or guidelines which relate to registration or continuing professional development were analysed and compared. Results: In New Zealand the Pharmacy Council require Pharmacists to have a minimum of 12 outcome credits over a 3-year period for recertification (2, 3). The outcome credit related to each CPD action and is based on relevance to the pharmacist and their practice. It is graded between one, for CPD which has occasional relevance to practice and three which have considerable relevance to practice. There are examples of completed CPD recording sheets on their website (8). In the UK, The General Pharmaceutical Council require Pharmacists to make a minimum of nine CPD entries per year (4) and detailed guidance on how to record CPD activities is provided (5,7). The Pharmacy Board of Australia divides CPD activities into three groups (6). Of the 20 credits required annually only 10 can be gained from group one activities, which is information accessed without assessment. There is only brief guidance on the recording of CPD. Discussion: The GPhC in the UK provided the most comprehensive guidance on acquisition of CPD credit points and documentation (5,7) The Pharmacy Council of New Zealand made CPD points relevant to practice.(2,8) The Pharmacy Board of Australia provided limited information for pharmacists on CPD activities, which may impede pharmacist participation. Information may assist in increasing pharmacists’ engagement in CPD activities. In conclusion, there is variation between the three countries in the amount and type of information provided about CPD requirements.

Technology transfer offices as boundary spanners in the pre-spin-off process: The case of a hybrid model

Over the past decades, universities have increasingly become ambidextrous organizations reconciling scientific and commercial missions. In order to manage this ambidexterity, technology transfer offices (TTOs) were established in most universities. This paper studies a specific, often implemented, but rather understudied type of TTO, namely a hybrid TTO model uniting centralized and decentralized levels. Employing a qualitative research design, we examine how and why the two TTO levels engage in diverse boundary spanning activities to help nascent spin-off companies move through the pre-spin-off process. Our research identifies differences in the types of boundary spanning activities that centralized and decentralized TTOs perform and in the parties they engage with. We find geographical, technological and organizational proximity to be important antecedents of the TTOs’ engagement in external and internal boundary spanning activities. These results have important implications for both academics and practitioners interested in university technology transfer through spin-off creation.

Prediction of shrinkage and porosity during drying: Considering both material properties and process conditions

Drying of food materials offers a significant increase in the shelf life of food materials, along with the modification of quality attributes due to simultaneous heat and mass transfer. Shrinkage and variations in porosity are the common micro and microstructural changes that take place during the drying of mostly the food materials. Although extensive research has been carried out on the prediction of shrinkage and porosity over the time of drying, no single model exists which consider both material properties and process condition in the same model. In this study, an attempt has been made to develop and validate shrinkage and porosity models of food materials during drying considering both process parameters and sample properties. The stored energy within the sample, elastic potential energy, glass transition temperature and physical properties of the sample such as initial porosity, particle density, bulk density and moisture content have been taken into consideration. Physical properties and validation have been made by using a universal testing machine ( Instron 2kN), a profilometer (Nanovea) and a pycnometer. Apart from these, COMSOL Multiphysics 4.4 has been used to solve heat and mass transfer physics. Results obtained from models of shrinkage and porosity is quite consistent with the experimental data. Successful implementation of these models would ensure the use of optimum energy in the course of drying and better quality retention of dried foods.

Advance care planning in stroke: Influence of time on engagement in the process

Purpose Individuals who experience stroke have a higher likelihood of subsequent stroke events, making it imperative to plan for future medical care. In the event of a further serious health event, engaging in the process of advanced care planning (ACP) can help family members and health care professionals (HCPs) make medical decisions for individuals who have lost the capacity to do so. Few studies have explored the views and experiences of patients with stroke about discussing their wishes and preferences for future medical events, and the extent to which stroke HCPs engage in conversations around planning for such events. In this study, we sought to understand how the process of ACP unfolded between HCPs and patients post-stroke. Patients and methods Using grounded theory (GT) methodology, we engaged in direct observation of HCP and patient interactions on an acute stroke unit and two stroke rehabilitation units. Using semi-structured interviews, 14 patients and four HCPs were interviewed directly about the ACP process. Results We found that open and continual ACP conversations were not taking place, patients experienced an apparent lack of urgency to engage in ACP, and HCPs were uncomfortable initiating ACP conversations due to the sensitive nature of the topic. Conclusion In this study, we identified lack of engagement in ACP post-stroke, attributable to patient and HCP factors. This encourages us to look further into the process of ACP in order to develop open communication between the patient with stroke, their families, and stroke HCPs.

Revising history for cost-informed process improvement

Organisations are constantly seeking new ways to improve operational efficiencies. This study investigates a novel way to identify potential efficiency gains in business operations by observing how they were carried out in the past and then exploring better ways of executing them by taking into account trade-offs between time, cost and resource utilisation. This paper demonstrates how these trade-offs can be incorporated in the assessment of alternative process execution scenarios by making use of a cost environment. A number of optimisation techniques are proposed to explore and assess alternative execution scenarios. The objective function is represented by a cost structure that captures different process dimensions. An experimental evaluation is conducted to analyse the performance and scalability of the optimisation techniques: integer linear programming (ILP), hill climbing, tabu search, and our earlier proposed hybrid genetic algorithm approach. The findings demonstrate that the hybrid genetic algorithm is scalable and performs better compared to other techniques. Moreover, we argue that the use of ILP is unrealistic in this setup and cannot handle complex cost functions such as the ones we propose. Finally, we show how cost-related insights can be gained from improved execution scenarios and how these can be utilised to put forward recommendations for reducing process-related cost and overhead within organisations.

Evaluating and predicting overall process risk using event logs

Companies standardise and automate their business processes in order to improve process eff ciency and minimise operational risks. However, it is di fficult to eliminate all process risks during the process design stage due to the fact that processes often run in complex and changeable environments and rely on human resources. Timely identification of process risks is crucial in order to insure the achievement of process goals. Business processes are often supported by information systems that record information about their executions in event logs. In this article we present an approach and a supporting tool for the evaluation of the overall process risk and for the prediction of process outcomes based on the analysis of information recorded in event logs. It can help managers evaluate the overall risk exposure of their business processes, track the evolution of overall process risk, identify changes and predict process outcomes based on the current value of overall process risk. The approach was implemented and validated using synthetic event logs and through a case study with a real event log.

Implementing process views in the web service environment

Web service and business process technologies are widely adopted to facilitate business automation and collaboration. Given the complexity of business processes, it is a sought-after feature to show a business process with different views to cater for the diverse interests, authority levels, etc., of different users. Aiming to implement such flexible process views in the Web service environment, this paper presents a novel framework named FlexView to support view abstraction and concretisation of WS-BPEL processes. In the FlexView framework, a rigorous view model is proposed to specify the dependency and correlation between structural components of process views with emphasis on the characteristics of WS-BPEL, and a set of rules are defined to guarantee the structural consistency between process views during transformations. A set of algorithms are developed to shift the abstraction and concretisation operations to the operational level. A prototype is also implemented for the proof-of-concept purpose. © 2010 Springer Science+Business Media, LLC.

Linking business goals to process models in semantic business process modeling

Broad knowledge is required when a business process is modeled by a business analyst. We argue that existing Business Process Management methodologies do not consider business goals at the appropriate level. In this paper we present an approach to integrate business goals and business process models. We design a Business Goal Ontology for modeling business goals. Furthermore, we devise a modeling pattern for linking the goals to process models and show how the ontology can be used in query answering. In this way, we integrate the intentional perspective into our business process ontology framework, enriching the process description and enabling new types of business process analysis. © 2008 IEEE.

Incorporating process variability into stormwater quality modelling

Process variability in pollutant build-up and wash-off generates inherent uncertainty that affects the outcomes of stormwater quality models. Poor characterisation of process variability constrains the accurate accounting of the uncertainty associated with pollutant processes. This acts as a significant limitation to effective decision making in relation to stormwater pollution mitigation. The study undertaken developed three theoretical scenarios based on research findings that variations in particle size fractions <150µm and >150µm during pollutant build-up and wash-off primarily determine the variability associated with these processes. These scenarios, which combine pollutant build-up and wash-off processes that takes place on a continuous timeline, are able to explain process variability under different field conditions. Given the variability characteristics of a specific build-up or wash-off event, the theoretical scenarios help to infer the variability characteristics of the associated pollutant process that follows. Mathematical formulation of the theoretical scenarios enables the incorporation of variability characteristics of pollutant build-up and wash-off processes in stormwater quality models. The research study outcomes will contribute to the quantitative assessment of uncertainty as an integral part of the interpretation of stormwater quality modelling outcomes.