What determines real-world meal size? Evidence for pre-meal planning

The customary approach to the study of meal size suggests that ‘events’ occurring during a meal lead to its termination. Recent research, however, suggests that a number of decisions are made before eating commences that may affect meal size. The present study sought to address three key research questions around meal size: the extent to which plate cleaning occurs; prevalence of pre-meal planning and its influence on meal size; and the effect of within-meal experiences, notably the development of satiation. To address these, a large-cohort internet-based questionnaire was developed. Results showed that plate cleaning occurred at 91% of meals, and was planned from the outset in 92% of these cases. A significant relationship between plate cleaning and meal planning was observed. Pre meal plans were resistant to modification over the course of the meal: only 18% of participants reported consumption that deviated from expected. By contrast, 28% reported continuing eating beyond satiation, and 57% stated that they could have eaten more at the end of the meal. Logistic regression confirmed pre-meal planning as the most important predictor of consumption. Together, our findings demonstrate the importance of meal planning as a key determinant of meal size and energy intake.

Planning for SMEs’ Proactive Waste Management in Office Building Retrofit Projects

Office building retrofit projects face many challenges for on-site waste management. While the projects themselves have the potential for a significant level of reuse and recycling from decon-struction and demolition, their unique characteristics often prohibit direct application of existing waste management systems, which are typically based on managing waste generated through new material application in new build projects. Moreover, current waste management plans include no stimuli to involve Small and Medium Enterprises (SMEs) for on-site waste management. As SMEs carry out the majority of on-site work as subcontractors, their active involvements will result in more proactive approaches to waste management and enhance project delivery. This paper discusses the interim results of a continuing research aimed at engaging SMEs in the planning processes of waste management through the collaboration between subcontractors and main contractors of retrofitting projects. It introduces a conceptual model for SMEs to proactively plan and manage on-site waste generation for both deconstruction and construction stages, before traditional waste management plans by the main contractor come into place. The model also suggests a collaboration process between SMEs as subcontractors and large companies as the main contractor to improve the involvement and performance of SMEs in waste management of office building retrofit projects.

‘I could eat a horse’! : meal planning determines meal size

Evidence that our food environment can affect meal size is often taken to indicate a failure of ‘conscious control’. By contrast, our research suggests that ‘expected satiation’ (fullness that a food is expected to confer) predicts self-selected meal size. However, the role of meal planning as a determinant of actual meal size remains unresolved, as does the extent to which meal planning is commonplace outside the laboratory. Here, we quantified meal planning and its relation to meal size in a large-cohort study. Participants (N= 764; 25.6 yrs, 78% female) completed a questionnaire containing items relating to their last meal. The majority (91%) of meals were consumed in their entirety. Furthermore, in 92% of these cases the participants decided to consume the whole meal, even before it began. A second major objective was to explore the prospect that meal plans are revised based on within-meal experience (e.g., development of satiation). Only 8% of participants reported ‘unexpected’ satiation that caused them to consume less than anticipated. Moreover, at the end of the meal 57% indicated that they were not fully satiated, and 29% continued eating beyond comfortable satiation (often to avoid wasting food). This pattern was neither moderated by BMI nor dieting status, and was observed across meal types. Together, these data indicate that meals are often planned and that planning corresponds closely with amount consumed. By contrast, we find limited evidence for within-meal modification of these plans, suggesting that ‘pre-meal cognition’ is an important determinant of meal size in humans.

Development of an autonomous unmanned aerial system to collect time-stamped samples from the atmosphere and localize potential pathogen sources

This paper presents the hardware development and testing of a new concept for air sampling via the integration of a prototype spore trap onboard an unmanned aerial system (UAS).We propose the integration of a prototype spore trap onboard a UAS to allow multiple capture of spores of pathogens in single remote locations at high or low altitude, otherwise not possible with stationary sampling devices.We also demonstrate the capability of this system for the capture of multiple time-stamped samples during a single mission.Wind tunnel testing was followed by simulation, and flight testing was conducted to measure and quantify the spread during simulated airborne air sampling operations. During autonomous operations, the onboard autopilot commands the servo to rotate the sampling device to a new indexed location once the UAS vehicle reaches the predefined waypoint or set of waypoints (which represents the region of interest). Time-stamped UAS data are continuously logged during the flight to assist with analysis of the particles collected. Testing and validation of the autopilot and spore trap integration, functionality, and performance is described. These tools may enhance the ability to detect new incursions of spores

Nurses driving change to improve access to education and quality in lcinical teaching : A partnership between Australia and Viet Nam

In Viet Nam, standards of nursing care fail to meet international competency standards. This increases risks to patient safety (eg. hospital acquired infection), consequently the Ministry of Health identified the need to strengthen nurse education in Viet Nam. This paper presents experiences of a piloted clinical teaching model developed in Ha Noi, to strengthen nurse led institutional capacity for in-service education and clinical teaching. Historically 90% of nursing education was conducted by physicians and professional development in hospitals for nurses was limited. There was minimal communication between hospitals and nursing schools about expectations of students and assessment and quality of the learning experience. As a result when students came to the clinical sites, no-one understood how to plan their learning objectives and utilise teaching and learning approaches appropriate to their level. Therefore student learning outcomes were variable. They focussed on procedures and techniques and “learning how to do” rather than learning how to plan, implement and evaluate patient care. This project is part of a multi-component capacity building program designed to improve nurse education in Viet Nam. The project was funded jointly by Queensland University of Technology (QUT) and the Australian Agency for International Development. Its aim was to develop a collaborative clinically-based model of teaching to create an environment that encourages evidence-based, student-centred clinical learning. Accordingly, strategies introduced promoted clinical teaching of competency based nursing practice utilising the regionally endorsed nurse core competency standards. Thirty nurse teachers from Viet Duc University Hospital and Hanoi Medical College participated in the program. These nurses and nurse teachers undertook face to face education in three workshops, and completed three assessment items. Assessment was applied, where participants integrated the concepts learned in each workshop and completed assessment tasks related to planning, implementing and evaluating teaching in the clinical area. Twenty of these participants were then selected to undertake a two week study tour in Brisbane, Australia where the clinical teaching model was refined and an action plan developed to integrate into both organisations with possible implementation across Viet Nam. Participants on this study tour also experienced clinical teaching and learning at QUT by attending classes held at the university, and were able to visit selected hospitals to experience clinical teaching in these settings as well. Effectiveness of the project was measured throughout the implementation phase and in follow up visits to the clinical site. To date changes have been noted on an individual and organisational level. There is also significant planning underway to incorporate the clinical teaching model developed across the organisation and how this may be implemented in other regions. Two participants have also been involved in disseminating aspects of this approach to clinical teaching in Ho Chi Minh, with further plans for more in-depth dissemination to occur throughout the country.

The development of a program to assist international nursing students to be prepared for clinical practice in the Australian health care context

Health education in Western Countries has grown considerably in the last decade and this has occurred for a number of reasons. Specifically Universities actively recruit International students as the health workforce becomes global; also it is much easier for students to move and study globally. Internationally there is a health workforce shortage and if students gain a degree in a reputable university their ability to work globally is improved significantly. However, when studying to practice in the health care field the student must undertake clinical practice in an acute or aged care setting. This can be a significant problem for students who are culturally and linguistically diverse in an English speaking country such as Australia. The issues that can arise stem from the language differences where communication, interpretation understanding and reading the cultural norms of the health care setting are major challenges for International students. To assist international students to be successful in their clinical education, an extra curriculum workshop program was developed to provide additional support. The program which runs twice each year includes on-campus interactive workshops that are complemented by targeted support provided for students and clinical staff who are supervising students’ practice experience in the workplace. As this is an English speaking country the workshop is based on practicing reading, writing, listening and speaking, as well as exploring basic health care concepts and cultural differences. This enables students to gain knowledge of and practice interpretation of cultural norms and expectations in a safe environment. This innovative series of interactive workshops in a highly student-centred learning environment combine education with role play and discussion with peers who are supported by culturally aware and competent Educators. Over the years it has been running, the program has been undertaken by an increasing number of students. In 2011, more than 100 students are expected to participate. Student evaluation of the program has confirmed that it has assisted the majority of them to be successful in their clinical studies. Effectiveness of the project is measured throughout the program and in follow up sessions. This ongoing information allows for continuous development of the program that serves to meet individual needs of the International student, the University and Service providers such as the hospitals. This feedback from students regarding their increased comprehension of the Australian colloquial Language, healthcare terminology, critical thinking and clinical skill development and a cultural awareness also enables them to maintain their feelings of self confidence and self esteem.

A multidisciplinary examination of fast bowling talent development in cricket

Research on expertise, talent identification and development has tended to be mono-disciplinary, typically adopting geno-centric or environmentalist positions, with an overriding focus on operational issues. In this thesis, the validity of dualist positions on sport expertise is evaluated. It is argued that, to advance understanding of expertise and talent development, a shift towards a multidisciplinary and integrative science focus is necessary, along with the development of a comprehensive multidisciplinary theoretical rationale. Dynamical systems theory is utilised as a multidisciplinary theoretical rationale for the succession of studies, capturing how multiple interacting constraints can shape the development of expert performers. Phase I of the research examines experiential knowledge of coaches and players on the development of fast bowling talent utilising qualitative research methodology. It provides insights into the developmental histories of expert fast bowlers, as well as coaching philosophies on the constraints of fast bowling expertise. Results suggest talent development programmes should eschew the notion of common optimal performance models and emphasize the individual nature of pathways to expertise. Coaching and talent development programmes should identify the range of interacting constraints that impinge on the performance potential of individual athletes, rather than evaluating current performance on physical tests referenced to group norms. Phase II of this research comprises three further studies that investigate several of the key components identified as important for fast bowling expertise, talent identification and development extrapolated from Phase I of this research. This multidisciplinary programme of work involves a comprehensive analysis of fast bowling performance in a cross-section of the Cricket Australia high performance pathways, from the junior, emerging and national elite fast bowling squads. Briefly, differences were found in trunk kinematics associated with the generation of ball speed across the three groups. These differences in release mechanics indicated the functional adaptations in movement patterns as bowlers’ physical and anatomical characteristics changed during maturation. Second to the generation of ball speed, the ability to produce a range of delivery types was highlighted as a key component of expertise in the qualitative phase. The ability of athletes to produce consistent results on different surfaces and in different environments has drawn attention to the challenge of measuring consistency and flexibility in skill assessments. Examination of fast bowlers in Phase II demonstrated that national bowlers can make adjustments to the accuracy of subsequent deliveries during performance of a cricket bowling skills test, and perform a range of delivery types with increased accuracy and consistency. Finally, variability in selected delivery stride ground reaction force components in fast bowling revealed the degenerate nature of this complex multi-articular skill where the same performance outcome can be achieved with unique movement strategies. Utilising qualitative and quantitative methodologies to examine fast bowling expertise, the importance of degeneracy and adaptability in fast bowling has been highlighted alongside learning design that promotes dynamic learning environments.

Quantification of particle emission characteristics and development of an emission model for use in transport microenvironments affected by traffic emissions

Vehicle emitted particles are of significant concern based on their potential to influence local air quality and human health. Transport microenvironments usually contain higher vehicle emission concentrations compared to other environments, and people spend a substantial amount of time in these microenvironments when commuting. Currently there is limited scientific knowledge on particle concentration, passenger exposure and the distribution of vehicle emissions in transport microenvironments, partially due to the fact that the instrumentation required to conduct such measurements is not available in many research centres. Information on passenger waiting time and location in such microenvironments has also not been investigated, which makes it difficult to evaluate a passenger’s spatial-temporal exposure to vehicle emissions. Furthermore, current emission models are incapable of rapidly predicting emission distribution, given the complexity of variations in emission rates that result from changes in driving conditions, as well as the time spent in driving condition within the transport microenvironment. In order to address these scientific gaps in knowledge, this work conducted, for the first time, a comprehensive statistical analysis of experimental data, along with multi-parameter assessment, exposure evaluation and comparison, and emission model development and application, in relation to traffic interrupted transport microenvironments. The work aimed to quantify and characterise particle emissions and human exposure in the transport microenvironments, with bus stations and a pedestrian crossing identified as suitable research locations representing a typical transport microenvironment. Firstly, two bus stations in Brisbane, Australia, with different designs, were selected to conduct measurements of particle number size distributions, particle number and PM2.5 concentrations during two different seasons. Simultaneous traffic and meteorological parameters were also monitored, aiming to quantify particle characteristics and investigate the impact of bus flow rate, station design and meteorological conditions on particle characteristics at stations. The results showed higher concentrations of PN20-30 at the station situated in an open area (open station), which is likely to be attributed to the lower average daily temperature compared to the station with a canyon structure (canyon station). During precipitation events, it was found that particle number concentration in the size range 25-250 nm decreased greatly, and that the average daily reduction in PM2.5 concentration on rainy days compared to fine days was 44.2 % and 22.6 % at the open and canyon station, respectively. The effect of ambient wind speeds on particle number concentrations was also examined, and no relationship was found between particle number concentration and wind speed for the entire measurement period. In addition, 33 pairs of average half-hourly PN7-3000 concentrations were calculated and identified at the two stations, during the same time of a day, and with the same ambient wind speeds and precipitation conditions. The results of a paired t-test showed that the average half-hourly PN7-3000 concentrations at the two stations were not significantly different at the 5% confidence level (t = 0.06, p = 0.96), which indicates that the different station designs were not a crucial factor for influencing PN7-3000 concentrations. A further assessment of passenger exposure to bus emissions on a platform was evaluated at another bus station in Brisbane, Australia. The sampling was conducted over seven weekdays to investigate spatial-temporal variations in size-fractionated particle number and PM2.5 concentrations, as well as human exposure on the platform. For the whole day, the average PN13-800 concentration was 1.3 x 104 and 1.0 x 104 particle/cm3 at the centre and end of the platform, respectively, of which PN50-100 accounted for the largest proportion to the total count. Furthermore, the contribution of exposure at the bus station to the overall daily exposure was assessed using two assumed scenarios of a school student and an office worker. It was found that, although the daily time fraction (the percentage of time spend at a location in a whole day) at the station was only 0.8 %, the daily exposure fractions (the percentage of exposures at a location accounting for the daily exposure) at the station were 2.7% and 2.8 % for exposure to PN13-800 and 2.7% and 3.5% for exposure to PM2.5 for the school student and the office worker, respectively. A new parameter, “exposure intensity” (the ratio of daily exposure fraction and the daily time fraction) was also defined and calculated at the station, with values of 3.3 and 3.4 for exposure to PN13-880, and 3.3 and 4.2 for exposure to PM2.5, for the school student and the office worker, respectively. In order to quantify the enhanced emissions at critical locations and define the emission distribution in further dispersion models for traffic interrupted transport microenvironments, a composite line source emission (CLSE) model was developed to specifically quantify exposure levels and describe the spatial variability of vehicle emissions in traffic interrupted microenvironments. This model took into account the complexity of vehicle movements in the queue, as well as different emission rates relevant to various driving conditions (cruise, decelerate, idle and accelerate), and it utilised multi-representative segments to capture the accurate emission distribution for real vehicle flow. This model does not only helped to quantify the enhanced emissions at critical locations, but it also helped to define the emission source distribution of the disrupted steady flow for further dispersion modelling. The model then was applied to estimate particle number emissions at a bidirectional bus station used by diesel and compressed natural gas fuelled buses. It was found that the acceleration distance was of critical importance when estimating particle number emission, since the highest emissions occurred in sections where most of the buses were accelerating and no significant increases were observed at locations where they idled. It was also shown that emissions at the front end of the platform were 43 times greater than at the rear of the platform. The CLSE model was also applied at a signalled pedestrian crossing, in order to assess increased particle number emissions from motor vehicles when forced to stop and accelerate from rest. The CLSE model was used to calculate the total emissions produced by a specific number and mix of light petrol cars and diesel passenger buses including 1 car travelling in 1 direction (/1 direction), 14 cars / 1 direction, 1 bus / 1 direction, 28 cars / 2 directions, 24 cars and 2 buses / 2 directions, and 20 cars and 4 buses / 2 directions. It was found that the total emissions produced during stopping on a red signal were significantly higher than when the traffic moved at a steady speed. Overall, total emissions due to the interruption of the traffic increased by a factor of 13, 11, 45, 11, 41, and 43 for the above 6 cases, respectively. In summary, this PhD thesis presents the results of a comprehensive study on particle number and mass concentration, together with particle size distribution, in a bus station transport microenvironment, influenced by bus flow rates, meteorological conditions and station design. Passenger spatial-temporal exposure to bus emitted particles was also assessed according to waiting time and location along the platform, as well as the contribution of exposure at the bus station to overall daily exposure. Due to the complexity of the interrupted traffic flow within the transport microenvironments, a unique CLSE model was also developed, which is capable of quantifying emission levels at critical locations within the transport microenvironment, for the purpose of evaluating passenger exposure and conducting simulations of vehicle emission dispersion. The application of the CLSE model at a pedestrian crossing also proved its applicability and simplicity for use in a real-world transport microenvironment.

Knowledge-based urban development processes of an emerging knowledge city : Brisbane, Australia

In the global knowledge economy, to attract and retain knowledge-intensive industries and workers, cities produce various development strategies. Such strategising is an important development mechanism for cities to complete their transformation into knowledge cities. This paper discusses the critical connections between knowledge city foundations and integrated knowledge-based urban development strategies, and scrutinises Brisbane’s strategies in attracting and retaining investment and talent. The paper introduces a knowledge-based urban development assessment framework and uses this framework to provide a clearer understanding of Brisbane’s knowledge-based development processes and knowledge city transformation experience. The assessment framework particularly focuses on examining Brisbane’s four development processes, institutional, economic, socio-cultural and urban development, in detail. The findings reveal that although Brisbane is still in early stages of its transformation into a fully-fledged knowledge city, global orientation and achievements of Brisbane in strategising knowledge-based urban development are noteworthy.

Moving towards a knowledge city? Brisbane's experience in knowledge-based urban development

: In the global knowledge economy, knowledge-intensive industries and knowledge workers are extensively seen as the primary factors to improve the welfare and competitiveness of cities. To attract and retain such industries and workers, cities produce knowledge-based urban development strategies, where such strategising is also an important development mechanism for cities and their economies. This paper investigates knowledge-based urban development strategies of Brisbane, Australia that support generation, attraction, and retention of investment and talent. The paper puts forward a clear understanding on the policy frameworks, and relevant applications of Brisbane’s knowledge-based urban development experience in becoming a prosperous knowledge city, and concludes by providing invaluable insights and directions for other cities seeking knowledge-based urban development.

Contributions of knowledge-based foundations of universities in knowledge city formation : a Malaysian case study

Purpose – In the 21st Century, as knowledge, technology and education are widely accepted to play key roles in the local economic development, the importance of making space and place for knowledge production is, therefore, on the rise resulting many city administrations and urban policy-makers worldwide restructuring their cities to become highly competitive and creative. Consequently, this has led to a new type of city form, knowledge city, and a new approach in their development, knowledge-based urban development. In this context, knowledge-based foundations of universities are regarded as one of the key elements for knowledge-based urban development and knowledge city formation due to their ability to provide a strong platform for knowledge generation, marketing and transfer. This paper aims to investigate the role and importance of universities and their knowledge-based foundations in the context of developing countries, particularly in Malaysia, in building prosperous knowledge cities of the era of the knowledge economy. Design/Methodology/Approach – The main methodological techniques employed in this research includes: a thorough review of the literature on the role of universities in spatial and socio-economic development of cities; a best practice analysis and policy review of urban and regional development policies targeting to use of university clusters in leveraging knowledge-based development, and; a case study in Malaysia with a review of various policy documents and strategic plans of the local universities and local and state authorities, interviews with key actors, and a trend analysis of local socio-economic and spatial changes. Originality/Value – This paper reports the findings of a pioneering research on examining the role and impact of universities and their knowledge-based foundations, in the context of Malaysia, in building knowledge cities of the era of the knowledge economy. By undertaking a case study investigation in Bandar Seri Iskandar, which is a newly emerging Malaysian knowledge city, located in Perak, Malaysia, the paper sheds light on an important issue of the 21st Century of how universities contribute to the knowledge-based development of cities. Practical Implications – Universities with their rich knowledge-based foundations are increasingly being recognised as knowledge hubs, exercising a strong influence in the intellectual vitality of the city where they are embedded. This paper reveals that universities, in joint action with business and society at large, are necessary prerequisites for constructing and maintaining knowledge societies and, therefore, building prosperous knowledge cities. In light of the literature and case findings, the paper sheds light on the contribution of knowledge-based foundations of universities in knowledge city formation and provides generic recommendations for cities and regions seeking knowledge city transformation.

What do beginning English teachers want from professional development?

This qualitative, interpretive case study allows insights into the reflective emerging teacher practitioner as it explores pre-service and beginning teachers’ preparedness to deal with curriculum change and the demands of the classroom and school community. Five beginning teachers were asked what they want from professional development in a period of rapid curriculum change. The study aligns with emerging local and national agendas for teacher professional development and accreditation in Australia. The data analysis, based on “community of practice” perspectives, shows that new teachers have clear ideas about the professional development they need and want. Professional development is seen as integral to their developing professional identities. The paper has implications for the way leadership teams offer and how new teachers take up professional development opportunities, upon which registration is contingent.

Knowledge-based urban development redefined : from theory to practice knowledge-based development of cities

The concept of knowledge-based urban development has first come to the urban planning and development agenda during the very last years of the 20th century as a promising paradigm to support the transformation process of cities into knowledge cities and their societies into knowledge societies. However, soon after the exponentially rapid advancements experienced, during the first decade of the 21st century, particularly, in the domains of economy, society, management and technology along with the severe impacts of climate change, have made the redefinition of the term a necessity. This paper, first, reports the findings of the review of the relatively short but dynamic history of urbanisation experiences of our cities around the globe. The paper, then, focuses on the 21st century urbanisation context and discusses the conceptual base of the knowledge-based development of cities and how this concept found application ground in many parts of the world. Following this, the paper speculates development of future cities by particularly highlighting potential challenges and opportunities that previously have not been fully considered. This paper, lastly, introduces and elaborates how relevant theories support the better conceptualisation of this relatively new, but rapidly emerging paradigm, and redefines it accordingly.

Planning for knowledge based urban development in Malaysia : Cyberjaya @ Multimedia Super Corridor

Knowledge based urban development (KBUD) is a new paradigm in urban planning tailoring to the era of knowledge economy. It aims mainly to assist a contemporary city to promote a more sustainable socio-spatial order. The paper reports on the investigation of KBUD initiative in Malaysia which is manifested through the establishment of a project called Multimedia Super Corridor (MSC). MSC Malaysia aims to attract knowledge workers and industries to invest and operate within the area by creating a world class urban corridor with state-of-the-art multimedia infrastructure, efficient transportation system and an attractive living environment. Based on documents analysis and interviews, this paper analyses the strategies, implementations, and achievements of KBUD initiative in Cyberjaya, being the leading intelligent city of the unique Malaysia’s KBUD project-MSC Malaysia. A critical evaluation is made to assess the achievements of MSC, by looking at the physical changes after about ten years since its official launching. The findings recommend some valuable lessons for other cities that strive to develop KBUD strategies, strengthen their sustainable socio-spatial policies, and seek a global recognition.

Knowledge based urban development in classrooms : planning Taipei's knowledge based development

Rapid urbanisation of the global population over the last two centuries has inevitably brought with it a number of challenges and opportunities for economic, environmental and social sustainability of regions. This is arguably a result of rapid globalisation and subsequent growth in knowledge and service based economic markets. This paper reviews the introduction of a specialised teaching structure where the concepts of Knowledge Based Urban Development and Knowledge Cities were taught to various students of the discipline of Urban and Regional Planning at the Queensland University of Technology, through their study tour to the city of Taipei, Taiwan. The concepts were conveyed under the name ‘Taipei Metropolis Knowledge Based Regional Planning Studio’ and its methodology reviewed a series of tasks that was considered to provide a stronger level of understanding of how Knowledge Cities and Knowledge Based Urban Development had been formed in some areas of Taiwan. Findings from this international collaborative planning studio indicate that students have gained a greater level of understanding and insight into planning systems and processes in a trans-cultural context. The students have also been exposed to ideas and knowledge that have challenged conventional perspectives and encouraged global awareness.