Peer mentoring for radiotherapy planning skills development: A pilot study

Introduction: This study aimed to determine the potential role and guidelines for implementation of skill-based peer mentoring for radiotherapy planning education. Methods: After four weekly mentoring sessions, both Year 3 mentors (n=9) and Year 2 mentees (n=9) were invited to complete a short online questionnaire relating to the impact of the initiative. The tool contained a mixture of Likert-style questions concerning student enjoyment and perceived usefulness of the initiative as well as more qualitative open questions that gathered perceptions of the peer mentoring process, implementation methods and potential future scope. Results: Several key discussion themes related to benefits to each stakeholder group, challenges arising, improvements and potential future directions. There were high levels of enjoyment and perceived value of the mentoring from both sides with 100% of the 18 respondents enjoying the experience. The informal format encouraged further learning, while mentors reported acquisition of valuable skills and gains in knowledge. Conclusions: Peer mentoring has a valuable and enjoyable role to play in radiotherapy planning training and helps consolidate theoretical understanding for experienced students. An informal approach allows for students to adopt the most appropriate mentoring model for their needs while providing them with a free space to engender additional discussion.

Integration of Geospatial and Built Environment - National Data Policy

Digital technology offers enormous benefits (economic, quality of design and efficiency in use) if adopted to implement integrated ways of representing the physical world in a digital form. When applied across the full extent of the built and natural world, it is referred to as the Digital Built Environment (DBE) and encompasses a wide range of approaches and technology initiatives, all aimed at the same end goal: the development of a virtual world that sufficiently mirrors the real world to form the basis for the smart cities of the present and future, enable efficient infrastructure design and programmed maintenance, and create a new foundation for economic growth and social well-being through evidence-based analysis. The creation of a National Data Policy for the DBE will facilitate the creation of additional high technology industries in Australia; provide Governments, industries and citizens with greater knowledge of the environments they occupy and plan; and offer citizen-driven innovations for the future. Australia has slipped behind other nations in the adoption and execution of Building Information Modelling (BIM) and the principal concern is that the gap is widening. Data driven innovation added $67 billion to the Australian economy in 20131. Strong open data policy equates to $16 billion in new value2. Australian Government initiatives such as the Digital Earth inspired “National Map” offer a platform and pathway to embrace the concept of a “BIM Globe”, while also leveraging unprecedented growth in open source / open data collaboration. Australia must address the challenges by learning from international experiences—most notably the UK and NZ—and mandate the use of BIM across Government, extending the Framework for Spatial Data Foundation to include the Built Environment as a theme and engaging collaboration through a “BIM globe” metaphor. This proposed DBE strategy will modernise the Australian urban planning and the construction industry. It will change the way we develop our cities by fundamentally altering the dynamics and behaviours of the supply chains and unlocking new and more efficient ways of collaborating at all stages of the project life-cycle. There are currently two major modelling approaches that contribute to the challenge of delivering the DBE. Though these collectively encompass many (often competing) approaches or proprietary software systems, all can be categorised as either: a spatial modelling approach, where the focus is generally on representing the elements that make up the world within their geographic context; and a construction modelling approach, where the focus is on models that support the life cycle management of the built environment. These two approaches have tended to evolve independently, addressing two broad industry sectors: the one concerned with understanding and managing global and regional aspects of the world that we inhabit, including disciplines concerned with climate, earth sciences, land ownership, urban and regional planning and infrastructure management; the other is concerned with planning, design, construction and operation of built facilities and includes architectural and engineering design, product manufacturing, construction, facility management and related disciplines (a process/technology commonly known as Building Information Modelling, BIM). The spatial industries have a strong voice in the development of public policy in Australia, while the construction sector, which in 2014 accounted for around 8.5% of Australia’s GDP3, has no single voice and because of its diversity, is struggling to adapt to and take advantage of the opportunity presented by these digital technologies. The experience in the UK over the past few years has demonstrated that government leadership is very effective in stimulating industry adoption of digital technologies by, on the one hand, mandating the use of BIM on public procurement projects while at the same time, providing comparatively modest funding to address the common issues that confront the industry in adopting that way of working across the supply chain. The reported result has been savings of £840m in construction costs in 2013/14 according to UK Cabinet Office figures4. There is worldwide recognition of the value of bringing these two modelling technologies together. Australia has the expertise to exercise leadership in this work, but it requires a commitment by government to recognise the importance of BIM as a companion methodology to the spatial technologies so that these two disciplinary domains can cooperate in the development of data policies and information exchange standards to smooth out common workflows. buildingSMART Australasia, SIBA and their academic partners have initiated this dialogue in Australia and wish to work collaboratively, with government support and leadership, to explore the opportunities open to us as we develop an Australasian Digital Built Environment. As part of that programme, we must develop and implement a strategy to accelerate the adoption of BIM processes across the Australian construction sector while at the same time, developing an integrated approach in concert with the spatial sector that will position Australia at the forefront of international best practice in this area. Australia and New Zealand cannot afford to be on the back foot as we face the challenges of rapid urbanisation and change in the global environment. Although we can identify some exemplary initiatives in this area, particularly in New Zealand in response to the need for more resilient urban development in the face of earthquake threats, there is still much that needs to be done. We are well situated in the Asian region to take a lead in this challenge, but we are at imminent risk of losing the initiative if we do not take action now. Strategic collaboration between Governments, Industry and Academia will create new jobs and wealth, with the potential, for example, to save around 20% on the delivery costs of new built assets, based on recent UK estimates.

Co-benefits of addressing climate change can motivate action around the world

Personal and political action on climate change is traditionally thought to be motivated by people accepting its reality and importance. However, convincing the public that climate change is real faces powerful ideological obstacles1, 2, 3, 4, and climate change is slipping in public importance in many countries5, 6. Here we investigate a different approach, identifying whether potential co-benefits of addressing climate change7 could motivate pro-environmental behaviour around the world for both those convinced and unconvinced that climate change is real. We describe an integrated framework for assessing beliefs about co-benefits8, distinguishing social conditions (for example, economic development, reduced pollution or disease) and community character (for example, benevolence, competence). Data from all inhabited continents (24 countries; 6,196 participants) showed that two co-benefit types, Development (economic and scientific advancement) and Benevolence (a more moral and caring community), motivated public, private and financial actions to address climate change to a similar degree as believing climate change is important. Critically, relationships were similar for both convinced and unconvinced participants, showing that co-benefits can motivate action across ideological divides. These relationships were also independent of perceived climate change importance, and could not be explained by political ideology, age, or gender. Communicating co-benefits could motivate action on climate change where traditional approaches have stalled.

Final report of Working Group 2: Traffic psychology [A COST Action TU1101 / HOPE collaboration]

BACKGROUND The workgroup of Traffic Psychology is concerned with the social, behavioral, and perceptual aspects that are associated with use and non-use of bicycle helmets, in their various forms and under various cycling conditions. OBJECTIVES The objectives of WG2 are to (1) share current knowledge among the people already working in the field, (2) suggest new ideas for research on and evaluation of the design of bicycle helmets, and (3) discuss options for funding of such research within the individual frameworks of the participants. Areas for research include 3.1. The patterns of use of helmets among different users: children, adults, and sports enthusiasts. 3.2. The use of helmets in different environments: rural roads, urban streets, and bike trails. 3.3. Concerns bicyclists have relative to their safety and convenience and the perceived impact of using helmets on comfort and convenience. 3.4. The benefit of helmets for enhancing visibility, and how variations in helmet design and colors affect daytime, nighttime, and dusktime visibility. 3.5. The role of helmets in the acceptance of city-wide pickup-and-drop-off bicycles. 3.6. The impact of helmets on visual search behaviour of bicyclists.

Planning for pandemics: Lessons from the past decade

It is now 10 years since the disease we now know as SARS-severe acute respiratory syndrome-caused more than 700 deaths around the world and made more than 8,000 people ill. More recently, in 2009 the global community experienced the first influenza pandemic of the 21st century-the 2009 H1N1 influenza pandemic. This paper analyses the major developments in international public health law relating to infectious diseases in the period since SARS and considers their implications for pandemic planning.

A comparative study of two design charrettes: Implications for codesign and participatory action research

The purpose of this paper is to explore how participatory prototyping, through the use of design charrettes, can advance participatory action research (PAR) approaches and contribute to codesign practices in organisational settings. This will be achieved through the comparison of two varying design charrette experiences from a PAR initiative to redesign spaces in the Auraria Library in Denver, Colorado. Each design charrette followed a three-stage sequence of information sharing, idea generation and prototyping, and prioritisation with each stage building upon the former, both in terms of design concepts and in building up elements of ‘making’. While both charrette structures were similar, leadership and execution varied considerably. Lessons learned from the two design charrette experiences are presented, including the value of participatory prototyping within PAR to support ‘research through design’ activities. In addition, it highlights the value of authentic design participation of ‘designing with’ rather than ‘designing for’ to encourage optimal design outcomes.

Population of computational rabbit-specific ventricular action potential models for investigating sources of variability in cellular repolarisation

Variability is observed at all levels of cardiac electrophysiology. Yet, the underlying causes and importance of this variability are generally unknown, and difficult to investigate with current experimental techniques. The aim of the present study was to generate populations of computational ventricular action potential models that reproduce experimentally observed intercellular variability of repolarisation (represented by action potential duration) and to identify its potential causes. A systematic exploration of the effects of simultaneously varying the magnitude of six transmembrane current conductances (transient outward, rapid and slow delayed rectifier K(+), inward rectifying K(+), L-type Ca(2+), and Na(+)/K(+) pump currents) in two rabbit-specific ventricular action potential models (Shannon et al. and Mahajan et al.) at multiple cycle lengths (400, 600, 1,000 ms) was performed. This was accomplished with distributed computing software specialised for multi-dimensional parameter sweeps and grid execution. An initial population of 15,625 parameter sets was generated for both models at each cycle length. Action potential durations of these populations were compared to experimentally derived ranges for rabbit ventricular myocytes. 1,352 parameter sets for the Shannon model and 779 parameter sets for the Mahajan model yielded action potential duration within the experimental range, demonstrating that a wide array of ionic conductance values can be used to simulate a physiological rabbit ventricular action potential. Furthermore, by using clutter-based dimension reordering, a technique that allows visualisation of multi-dimensional spaces in two dimensions, the interaction of current conductances and their relative importance to the ventricular action potential at different cycle lengths were revealed. Overall, this work represents an important step towards a better understanding of the role that variability in current conductances may play in experimentally observed intercellular variability of rabbit ventricular action potential repolarisation.

LiDAR Augmented Optimal Path Planning for Unmanned Aerial Vehicle during Remote Sensing at Low Altitude and Network Sensor Data Acquisition

This technical report describes a Light Detection and Ranging (LiDAR) augmented optimal path planning at low level flight methodology for remote sensing and sampling Unmanned Aerial Vehicles (UAV). The UAV is used to perform remote air sampling and data acquisition from a network of sensors on the ground. The data that contains information on the terrain is in the form of a 3D point clouds maps is processed by the algorithms to find an optimal path. The results show that the method and algorithm are able to use the LiDAR data to avoid obstacles when planning a path from a start to a target point. The report compares the performance of the method as the resolution of the LIDAR map is increased and when a Digital Elevation Model (DEM) is included. From a practical point of view, the optimal path plan is loaded and works seemingly with the UAV ground station and also shows the UAV ground station software augmented with more accurate LIDAR data.

Consultation with Aboriginal and Torres Strait Islander people in early childhood education: The impact of colonial discourses

In Australian early years education, consultation and partnerships with Aboriginal and Torres Strait Islander people are central to embedding Indigenous perspectives. Building sustained and reciprocal partnerships with Aboriginal and Torres Strait Islander people supports access to local knowledges and perspectives to inform curriculum planning, as well as protocols and community processes, and contemporary responses to colonisation. Drawing on data from a doctoral study about embedding Aboriginal and Torres Strait Islander perspectives in early childhood education curricula, this paper examines interactional patterns in consultations between non-Indigenous early childhood educators and Indigenous people in real and supposed form. Data is read through whiteness studies literature and related critiques to identify how the educators positioned Indigenous people in interactional patterns and how the mobilisation of colonial discourses impacted the potential for reciprocity and sustained partnerships, despite the best of intentions. Colonial traces of positioning Indigenous people as informants, targeted resources or knowledge commissioners were shown to be most salient in interactional patterns. While these findings are contextualised within Australia, I suggest they have applicability in examining approaches to embedding Indigenous perspectives in education curricula in other colonising contexts such as Canada and New Zealand.

The bias and assumptions in the Aboriginal and Torres Strait Islander Education Action Plan

This presentation argues that “genuine” engagement and consultation is required where Indigenous voice is included within the policy development process for “true” progress to be achieved. With the ever increasing engagement of Aboriginal and Torres Strait Islander people in the decision making processes of Indigenous education, it is anticipated that there will be provision of opportunities for better outcomes and a greater acceptance of the policy within community (Department of Prime Minister and Cabinet, 2014). This presentation is derived from a larger project where the Aboriginal and Torres Strait Islander Education Action Plan (MCEECDYA, 2011) was critically analysed using Fairclough’s (2001) Critical Discourse Analysis framework and Rigney’s (1999) Indigenist Research Principles. Within this study, the underlying assumptions and bias identified within the policy and how it positions Aboriginal and Torres Strait Islander people were articulated. The major findings that emerged from the data included: - a) the homogenous grouping of Aboriginal and Torres Strait Islander people; - b) the maintenance of the prevalent dominant ideology within policy, and finally; - c) the expectation by the power elite of increased engagement and connections by Aboriginal and Torres Strait Islander peoples without consideration of the detrimental effects of past policies and reforms.

The ultimate edge: The case for planning media for sustaining space communities

Governments and intergovernmental organisations have long recognised that space communities – the ultimate ‘settlements at the edge’ – will exist one day and have based their first plans for these on another region ‘at the edge’, the Antarctic. United States President Eisenhower proposed to the United Nations in 1960 that the principles of the Antarctic Treaty be applied to outer space and celestial bodies (State Department, n.d.). Three years later the UN adopted the Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space and in 1967 that became the Outer Space Treaty. According to the UN Office for Outer Space Affairs, ‘the Treaty was opened for signature by the three depository Governments (the Russian Federation, the United Kingdom and the United States of America) in January 1967, and it entered into force in October 1967’ (Office for Outer Space Affairs, n.d). The status of the treaty (at time of writing) was 89 signatories and 102 parties (Office for Disarmament Affairs, n.d.). Other related instruments include the Rescue Agreement, the Liability Convention, the Registration Convention and the Moon Agreement (Office for Outer Space Affairs, n.d.-a). Jumping to the present, a newsagency reported in July 2014 (Reuters, 2014) that the British Government had shortlisted eight aerodromes in its search for a potential base for the UK’s first spaceplane flights which Ministers want to happen by 2018 (UK Space Agency, 2014). The United States already has a spaceport, in New Mexico (Cokley, Rankin, Heinrich, & McAuliffe, 2013)...

An automated emergency landing system for fixed-wing aircraft: Planning and control

A number of hurdles must be overcome in order to integrate unmanned aircraft into civilian airspace for routine operations. The ability of the aircraft to land safely in an emergency is essential to reduce the risk to people, infrastructure and aircraft. To date, few field-demonstrated systems have been presented that show online re-planning and repeatability from failure to touchdown. This paper presents the development of the Guidance, Navigation and Control (GNC) component of an Automated Emergency Landing System (AELS) intended to address this gap, suited to a variety of fixed-wing aircraft. Field-tested on both a fixed-wing UAV and Cessna 172R during repeated emergency landing experiments, a trochoid-based path planner computes feasible trajectories and a simplified control system executes the required manoeuvres to guide the aircraft towards touchdown on a predefined landing site. This is achieved in zero-thrust conditions with engine forced to idle to simulate failure. During an autonomous landing, the controller uses airspeed, inertial and GPS data to track motion and maintains essential flight parameters to guarantee flyability, while the planner monitors glide ratio and re-plans to ensure approach at correct altitude. Simulations show reliability of the system in a variety of wind conditions and its repeated ability to land within the boundary of a predefined landing site. Results from field-tests for the two aircraft demonstrate the effectiveness of the proposed GNC system in live operation. Results show that the system is capable of guiding the aircraft to close proximity of a predefined keyhole in nearly 100% of cases.

A critical analysis of the Aboriginal and Torres Strait Islander Education Action Plan

This study involves the analysis of one of the most recent Indigenous Education policies, the Aboriginal and Torres Strait Islander Education Action Plan 2010-2014 (MCEECDYA, 2011). It examines how the language used within policy positions Aboriginal and Torres Strait Islander peoples. Articulating Rigney's (1999) Indigenist Research Principles with Fairclough's (2001) Critical Discourse Analysis provides a platform for critical dialogues about policy decision-making. In doing so, this articulation enables and emphasises the need for potential policy revision to contribute to the Aboriginal and Torres Strait Islander struggle for self-determination.

Planning, development and management of sustainable cities: A commentary from the guest editors

Cities are the most dramatic manifestations of human activities on the surface of the earth. These human-dominated organisms—i.e., cities—degrade natural habitats, simplify species composition, disrupt hydrological systems, and modify energy flow and nutrient cycling. Today, these consequential impacts of human activities, originated from population increase, rapid urbanization, high private motor vehicle dependency, deregulated industrialization and mass livestock production, are increasing exponentially and causing great deal of environmental, social, and economic challenges both at global and local scales. In such a situation, establishment of sustainable cities, through sustainable urban development practices, is seen as a potential panacea to combat these challenges responsibly, effectively, and efficiently. This paper offers a critical review of the key literature on the issues relating to planning, development and management of sustainable cities, introduces the contributions from the Special Issue, and speculates on the prospective research directions to place necessary mechanisms to secure a sustainable urban future for all.