Computation of confined swirling flow using RNG and k-epsilon turbulence models

In this work we numerically model isothermal turbulent swirling flow in a cylindrical burner. Three versions of the RNG k-epsilon model are assessed against performance of the standard k-epsilon model. Sensitivity of numerical predictions to grid refinement, differing convective differencing schemes and choice of (unknown) inlet dissipation rate, were closely scrutinised to ensure accuracy. Particular attention is paid to modelling the inlet conditions to within the range of uncertainty of the experimental data, as model predictions proved to be significantly sensitive to relatively small changes in upstream flow conditions. We also examine the characteristics of the swirl--induced recirculation zone predicted by the models over an extended range of inlet conditions. Our main findings are: - (i) the standard k-epsilon model performed best compared with experiment; - (ii) no one inlet specification can simultaneously optimize the performance of the models considered; - (iii) the RNG models predict both single-cell and double-cell IRZ characteristics, the latter both with and without additional internal stagnation points. The first finding indicates that the examined RNG modifications to the standard k-e model do not result in an improved eddy viscosity based model for the prediction of swirl flows. The second finding suggests that tuning established models for optimal performance in swirl flows a priori is not straightforward. The third finding indicates that the RNG based models exhibit a greater variety of structural behaviour, despite being of the same level of complexity as the standard k-e model. The plausibility of the predicted IRZ features are discussed in terms of known vortex breakdown phenomena.

What consumers think, do and say about antibiotic use

Objective The objectives of this study were to investigate (1) the attitudes and behaviours of Australian consumers in antibiotic use, and (2) their understanding of antibiotic resistance. Methods Semi-structured interviews were conducted with consumers in May/June 2015. Convenience sampling was used to recruit consumers between 18–54 years old. Thirty-two consumers were interviewed. Transcripts were analysed to identify themes. Lessons Learned Dominant themes for attitudes and behaviours regarding antibiotics were (a) avoidance of antibiotic use unless clinically warranted; (b) antibiotics were useful but “weakened the body”; and (c) use of complementary medicines as adjuncts to antibiotics or to strengthen the immune system. Key information needs were (a) unambiguous instructions from GPs when prescribed antibiotics, to avoid inappropriate medicine-taking behaviour; (b) rationale for antibiotic selection; and (c) treatment duration. Antibiotic resistance was conceptualised in three ways: as a property of the body (body becomes resistant to antibiotics); the medication (antibiotic no longer effective); and the bacteria (bacteria is resistant). Antibiotic resistance was perceived as an issue that would only affect the wider community in the future, although most recognised that it is a current challenge for hospitals. Personal good health and/or avoidance of antibiotics were perceived as insurance against being adversely affected by antibiotic resistance. Implications A structured survey (discrete choice experiment) will be developed from these findings to investigate how consumers trade-off on factors influencing antibiotic use. Public health campaigns promoting conservation of antibiotics can benefit from these findings.

An object-centred approach to encourage online participation in the context of behaviour change

Online groups rely on contributions from their members to flourish, but in the context of behaviour change individuals are typically reluctant to participate actively before they have changed successfully. We took inspiration from CSCW research on objects to address this problem by shifting the focus of online participation from the exchange of personal experiences to more incidental interactions mediated by objects that offer support for change. In this article we describe how we designed, deployed and studied a smartphone application that uses different objects, called distractions and tips, to facilitate social interaction amongst people trying to quit smoking. A field study with 18 smokers revealed different forms of interaction: purely instrumental interactions with the objects, subtle engagement with other users through receptive and covert interactions, as well as explicit interaction with other users through disclosure and mutual support. The distraction objects offered a stepping-stone into interaction, whereas the tips encouraged interaction with the people behind the objects. This understanding of interaction through objects complements existing frameworks of online participation and adds to the current discourse on object-centred sociality. Furthermore, it provides an alternative approach to the design of online support groups, which offers the users enhanced control about the information they share with other users. We conclude by discussing how researchers and practitioners can apply the ideas of interaction around objects to other domains where individuals may have a simultaneous desire and reluctance to interact.

Social interaction and reflection for behaviour change

This article introduces the theme issue on social interaction and reflection for behaviour change. A large body of research exists on systems designed to help users in changing their behaviours, for instance, to exercise more regularly or to reduce energy consumption. Increasingly, these systems focus on multiple users, often to encourage open-ended reflection rather than prescribing a particular course of action. As background for this theme issue, this article presents a literature review on behaviour change support systems that focus on social interaction and reflection. The review highlights five key approaches amongst these systems: social traces, social support, collective use, reflection-in-action, and reflection-on-action. Each approach offers unique benefits, but also challenges for the design of behaviour change support systems. We highlight how the articles in this theme issue contribute to our current understanding of these five approaches, and beyond that, set out some broad directions for future work.

Things you don't want to know about yourself: Ambivalence about tracking and sharing personal information for behaviour change

Technologies that facilitate the collection and sharing of personal information can feed people's desire for enhanced self-knowledge and help them to change their behaviour, yet for various reasons people can also be reluctant to use such technologies. This paper explores this tension through an interview study in the context of smoking cessation. Our findings show that smokers and recent ex-smokers were ambivalent about their behaviour change as well as about collecting personal information through technology and sharing it with other users. We close with a summary of three challenges emerging from such ambivalence and directions to address them.

Formal network behaviour analysis using model checking

In this research we modelled computer network devices to ensure their communication behaviours meet various network standards. By modelling devices as finite-state machines and examining their properties in a range of configurations, we discovered a flaw in a common network protocol and produced a technique to improve organisations' network security against data theft.

Atomistic investigation into the mechanical behaviour of crystalline and amorphous TiO2 nanotubes

Titanium dioxide (TiO2) nanotubes are appealing to research communities due to their excellent functional properties. However, there is still a lack of understanding of their mechanical properties. In this work, we conduct molecular dynamics (MD) simulations to investigate the mechanical behaviour of rutile and amorphous TiO2 nanotubes. The results indicate that the rutile TiO2 nanotube has a much higher Young's modulus (∼800 GPa) than the amorphous one (∼400 GPa). Under tensile loading, rutile nanotubes fail in the form of brittle fracture but significant ductility (up to 30%) has been observed in amorphous nanotubes. This is attributed to a unique ‘repairing’ mechanism via bond reconstruction at under-coordinated sites as well as bond conversion at over-coordinated sites. In addition, it is observed that the fracture strength of rutile nanotubes is strongly dependent on their free surfaces. These findings are considered to be useful for development of TiO2 nanostructures with improved mechanical properties.

Behaviour of natural zeolites used for the treatment of simulated and actual coal seam gas water

Coal seam gas operations produce significant quantities of associated water which often require demineralization. Ion exchange with natural zeolites has been proposed as a possible approach. The interaction of natural zeolites with solutions of sodium chloride and sodium bicarbonate in addition to coal seam gas water is not clear. Hence, we investigated ion exchange kinetics, equilibrium, and column behaviour of an Australian natural zeolite. Kinetic tests suggested that the pseudo first order equation best simulated the data. Intraparticle diffusion was part of the rate limiting step and more than one diffusion process controlled the overall rate of sodium ion uptake. Using a constant mass of zeolite and variable concentration of either sodium chloride or sodium bicarbonate resulted in a convex isotherm which was fitted by a Langmuir model. However, using a variable mass of zeolite and constant concentration of sodium ions revealed that the exchange of sodium ions with the zeolite surface sites was in fact unfavourable. Sodium ion exchange from bicarbonate solutions (10.3 g Na/kg zeolite) was preferred relative to exchange from sodium chloride solutions (6.4 g Na/kg zeolite). The formation of calcium carbonate species was proposed to explain the observed behaviour. Column studies of coal seam gas water showed that natural zeolite had limited ability to reduce the concentration of sodium ions (loading 2.1 g Na/kg zeolite) with rapid breakthrough observed. It was concluded that natural zeolites may not be suitable for the removal of cations from coal seam gas water without improvement of their physical properties.

Season of birth and location of residence: Defining the role of ultraviolet radiation exposure on childhood temperament and behaviour

This thesis added new insight to research knowledge about the role that season and ultraviolet radiation (UV) exposure during pregnancy has on children's temperament and behaviours, using a nation-wide longitudinal study. It was found that young children born in summer months are likely to have problematic behaviours. The thesis also found that summer-born children are likely to receive lowest levels of UV exposure during the gestational period. Finally, this work showed that low gestational UV exposure is associated with an increased risk of behavioural problems in children.

Glycaemic behaviour during breastfeeding in women with Type 1 diabetes

Aim To describe glycaemia in both breastfeeding women and artificially feeding women with Type 1 diabetes, and the changes in glycaemia induced by suckling. Methods A blinded continuous glucose monitor was applied for up to 6 days in eight breastfeeding and eight artificially feeding women with Type 1 diabetes 2–4 months postpartum. Women recorded glucose levels, insulin dosages, oral intake and breastfeeding episodes. A standardized breakfast was consumed on 2 days. A third group (clinic controls) were identified from a historical database. Results Carbohydrate intake tended to be higher in breastfeeding than artificially feeding women (P = 0.09) despite similar insulin requirements. Compared with breastfeeding women, the high blood glucose index and standard deviation of glucose were higher in artificially feeding women (P = 0.02 and 0.06, respectively) and in the clinical control group (P = 0.02 and 0.05, respectively). The low blood glucose index and hypoglycaemia were similar. After suckling, the low blood glucose index increased compared with before (P < 0.01) and during (P < 0.01) suckling. Hypoglycaemia (blood glucose < 4.0 mmol/l) occurred within 3 h of suckling in 14% of suckling episodes, and was associated with time from last oral intake (P = 0.04) and last rapid-acting insulin (P = 0.03). After a standardized breakfast, the area under the glucose curve was positive. In breastfeeding women the area under the glucose curve was positive if suckling was avoided for 1 h after eating and negative if suckling occurred within 30 min of eating. Conclusions Breastfeeding women with Type 1 diabetes had similar hypoglycaemia but lower glucose variability than artificially feeding women. Suckling reduced maternal glucose levels but did not cause hypoglycaemia in most episodes.

Augmenting process elicitation with visual priming: An empirical exploration of user behaviour and modelling outcomes

Business process models have become an effective way of examining business practices to identify areas for improvement. While common information gathering approaches are generally efficacious, they can be quite time consuming and have the risk of developing inaccuracies when information is forgotten or incorrectly interpreted by analysts. In this study, the potential of a role-playing approach to process elicitation and specification has been examined. This method allows stakeholders to enter a virtual world and role-play actions similarly to how they would in reality. As actions are completed, a model is automatically developed, removing the need for stakeholders to learn and understand a modelling grammar. An empirical investigation comparing both the modelling outputs and participant behaviour of this virtual world role-play elicitor with an S-BPM process modelling tool found that while the modelling approaches of the two groups varied greatly, the virtual world elicitor may not only improve both the number of individual process task steps remembered and the correctness of task ordering, but also provide a reduction in the time required for stakeholders to model a process view.

Modelling, calibrating, and validating car following and lane changing behaviour

Car following (CF) and lane changing (LC) are two primary driving tasks observed in traffic flow, and are thus vital components of traffic flow theories, traffic operation and control. Over the past decades a large number of CF models have been developed in an attempt to describe CF behaviour under a wide range of traffic conditions. Although CF has been widely studied for many years, LC did not receive much attention until recently. Over the last decade, researchers have slowly but surely realized the critical role that LC plays in traffic operations and traffic safety; this realization has motivated significant attempts to model LC decision-making and its impact on traffic. Despite notable progresses in modelling CF and LC, our knowledge on these two important issues remains incomplete because of issues related to data, model calibration and validation, human factors, just to name a few. Thus, this special issue will focus on latest developments in modelling, calibrating, and validating two primary vehicular interactions observed in traffic flow: CF and LC.

BDST modelling of sodium ion exchange column behaviour with strong acid cation resin in relation to coal seam water treatment

Reverse osmosis is the dominant technology utilized for desalination of saline water produced during the extraction of coal seam gas. Alternatively, ion exchange is of interest due to potential cost advantages. However, there is limited information regarding the column performance of strong acid cation resin for removal of sodium ions from both model and actual coal seam water samples. In particular, the impact of bed depth, flow rate, and regeneration was not clear. Consequently, this study applied Bed Depth Service Time (BDST) models to reveal that increasing sodium ion concentration and flow rates diminished the time required for breakthrough to occur. The loading of sodium ions on fresh resin was calculated to be ca. 71.1 g Na/kg resin. Difficulties in regeneration of the resin using hydrochloric acid solutions were discovered, with 86% recovery of exchange sites observed. The maximum concentration of sodium ions in the regenerant brine was found to be 47,400 mg/L under the conditions employed. The volume of regenerant waste formed was 6.2% of the total volume of water treated. A coal seam water sample was found to load the resin with only 53.5 g Na/kg resin, which was consistent with not only the co-presence of more favoured ions such as calcium, magnesium, barium and strontium, but also inefficient regeneration of the resin prior to the coal seam water test.

Influences on sleep-wake behaviour in older adults and community dementia care: Light exposure and partner impact

This project described sleep-wake behaviour in community-dwelling older adults and in community dementia care. It examined the applicability of a newly presented conceptual model (the Multifactorial Influences on Sleep Health model) to evaluate factors influencing sleep in ageing, with a particular focus on the importance of daytime light exposure and the impact of partners.

Experimental study on behaviour of concrete filled double skin tube columns under lateral impact loading

This paper presents an experimental investigation on the lateral impact response of axially loaded concrete filled double skin tube (CFDST) columns. A total of four test series are being conducted at Queensland University of Technology using a novel horizontal impact-testing rig. The test results reported in this paper are from the first test series, where the columns are pinned at both ends and impacted at mid-span. In the next three series, effects of support conditions, impact location and repeated impact will be treated. The main objectives of the current paper are to describe the innovative testing procedure and provide some insight into the lateral impact behavior and failure of simply supported axially pre-loaded CFDST columns. The results include time histories of impact forces, reaction forces, axial force and global lateral deflection. Based on the test data, the failure mode, peak impact force, peak reaction forces, maximum deflection and residual deflection, with and without axial load, are analyzed and discussed. The findings of this study will serve as a benchmark reference for future analysis and design of CFDST columns.