An accuracy assessment of ASTER stereo images-derived digital elevation model by using rational polynomial coefficient model

The along-track stereo images of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor with 15 m resolution were used to generate Digital Elevation Model (DEM) on an area with low and near Mean Sea Level (MSL) elevation in Johor, Malaysia. The absolute DEM was generated by using the Rational Polynomial Coefficient (RPC) model which was run on ENVI 4.8 software. In order to generate the absolute DEM, 60 Ground Control Pointes (GCPs) with almost vertical accuracy less than 10 meter extracted from topographic map of the study area. The assessment was carried out on uncorrected and corrected DEM by utilizing dozens of Independent Check Points (ICPs). Consequently, the uncorrected DEM showed the RMSEz of ± 26.43 meter which was decreased to the RMSEz of ± 16.49 meter for the corrected DEM after post-processing. Overall, the corrected DEM of ASTER stereo images met the expectations.

Generation and assessment of accuracy of Digital Elevation Model by using Pcigeomatica (10.3)

This study aims to assess the accuracy of Digital Elevation Model (DEM) which is generated by using Toutin’s model. Thus, Toutin’s model was run by using OrthoEngineSE of PCI Geomatics 10.3.Thealong-track stereoimages of Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER) sensor with 15 m resolution were used to produce DEM on an area with low and near Mean Sea Level (MSL) elevation in Johor Malaysia. Despite the satisfactory pre-processing results the visual assessment of the DEM generated from Toutin’s model showed that the DEM contained many outliers and incorrect values. The failure of Toutin’s model may mostly be due to the inaccuracy and insufficiency of ASTER ephemeris data for low terrains as well as huge water body in the stereo images.

Improving criteria and feedback in student assessment in law

Spurred on by both the 1987 Pearce Report1 and the general changes to higher education spawned by the “Dawkins revolution” from 1988, there has been much critical self-evaluation leading to profound improvements to the quality of teaching in Australian law schools.2 Despite the changes there are still areas of general law teaching practice which have lagged behind recent developments in our understanding of what constitutes high quality teaching. One such area is assessment criteria and feedback. The project Improving Feedback in Student Assessment in Law is an attempt to remedy this. It aims to produce a manual containing key principles for the design of assessment and the provision of feedback, with practical yet flexible ideas and illustrations which law teachers may adopt or modify. Most of the examples have been developed by teachers at the University of Melbourne Law School. The project was supported in 1996 by a Committee for the Advancement of University Teaching grant and the manual will be published late in 1997.3 This note summarises the core principles which are elaborated further in the manual.

Assessment of robust autonomy for unmanned systems : progress and challenges

The growing number of potential applications of Unmanned Aircraft Systems (UAS) in civilian operations and national security is putting pressure of National Airworthiness Authorities to provide a path for certification and allow UAS integration into the national airspace. The success of this integration depends not only on developments in improved UAS reliability and safety, but also on regulations for certification, and methodologies for operational performance and safety assessment. This paper focuses on the latter and describes progress in relation to a previously proposed framework for evaluating robust autonomy of UAS. The paper draws parallels between the proposed evaluation framework and the evaluation of pilots during the licensing process. It discusses how the data from the proposed evaluation can be used as an aid for decision making in certification and UAS designs. Finally, it discusses challenges associated with the evaluation.

Predicting the likelihood of non-healing : a venous leg ulcer risk assessment tool

This project developed, validated and tested reliability of a risk assessment tool to predict the risk of failure to heal of patients with venous leg ulcers within 24 weeks. The risk assessment tool will allow clinicians to be able to determine realistic outcomes for their patients, promote early healing and potentially avoid weeks of inappropriate therapy. The tool will also assist in addressing specific risk factors and guide decisions on early, alternative, tailored interventions.

Integrating ‘role play’ in assessment to strengthen professional conduct and accountability of students : a pilot study

BACKGROUND In a process engineering setting, graduates are frequently allocated reviews of existing operations or required to scope new production processes by their supervisors with a view to improving or expanding on operations and overall productivity. These tasks may be carried out in teams and in consultation with the process engineer’s immediate line manager or a more experienced engineer, such as the Production or Maintenance Manager; ultimately reporting to senior management, which is frequently a non-engineer. Although professional skills development is part of engineering curricula, ‘professional conduct’ and ‘accountability’ required for dealing with peers and superiors in industry is not very well addressed at university. Consequently, upon graduation, many students are, in terms of knowledge and experience in this area, underprepared to work effectively in industry settings. PURPOSE The purpose of this study was to develop and implement a role-play scenario within a core 2nd year process engineering unit, so that students could gain knowledge, skills and experience in different aspects (and nuances) of professional conduct and accountability. DESIGN/METHOD In the role-play scenario, students worked in ‘engineering production teams’ to design a process for an iconic Queensland fruitcake and to present their solution and recommendations (culminating in a poster presentation) to an assessment panel consisting of staff, role-playing as, ‘production and plant managers’. Students were assessed on several areas, including professionalism using a criteria referenced assessment guide by a 3-member cross-disciplinary staff panel consisting of a Business Faculty lecturer, an engineer from industry and the lecturer of the Process Engineering unit. Professional conduct and accountability was gauged through direct questioning by the panel. Feedback was also sought from students on various aspects through a survey questionnaire after the role play activity at the end of semester. RESULTS Overall, the role play was very well performed with students achieving an average score of 79.3/100 (distinction grade). Professional conduct as assessed by panel was on average better than scores given for professional accountability (4.0 compared with 3.6 out of 5). Feedback from students indicated that the learning activities had contributed to their overall understanding of the content and the role of process engineers. Industry involvement was rated very highly as contributing to their learning at 4.8 (on Likert scale from 1 – 5) and the poster presentation was rated at 3.6. CONCLUSIONS This pilot study was successful in implementing a new assessment task for modelling professional conduct and accountability within a 2nd year core unit. This task incorporated a role-play activity and there was evidence to suggest that this and associated learning tasks were successful in broadening students’ understanding and skills in this area required for engineering practice. Following feedback given by students and staff, improvements will be made to the nature of the problem, how it is defined, its assessment, and the approach taken in the role-play scenario when the unit is offered in 2014.

The Catlin Seaview Survey – kilometre-scale seascape assessment, and monitoring of coral reef ecosystems

1.Marine ecosystems provide critically important goods and services to society, and hence their accelerated degradation underpins an urgent need to take rapid, ambitious and informed decisions regarding their conservation and management. 2.The capacity, however, to generate the detailed field data required to inform conservation planning at appropriate scales is limited by time and resource consuming methods for collecting and analysing field data at the large scales required. 3.The ‘Catlin Seaview Survey’, described here, introduces a novel framework for large-scale monitoring of coral reefs using high-definition underwater imagery collected using customized underwater vehicles in combination with computer vision and machine learning. This enables quantitative and geo-referenced outputs of coral reef features such as habitat types, benthic composition, and structural complexity (rugosity) to be generated across multiple kilometre-scale transects with a spatial resolution ranging from 2 to 6 m2. 4.The novel application of technology described here has enormous potential to contribute to our understanding of coral reefs and associated impacts by underpinning management decisions with kilometre-scale measurements of reef health. 5.Imagery datasets from an initial survey of 500 km of seascape are freely available through an online tool called the Catlin Global Reef Record. Outputs from the image analysis using the technologies described here will be updated on the online repository as work progresses on each dataset. 6.Case studies illustrate the utility of outputs as well as their potential to link to information from remote sensing. The potential implications of the innovative technologies on marine resource management and conservation are also discussed, along with the accuracy and efficiency of the methodologies deployed.

Development of an online role-play assessment initiative for nursing students in their bioscience studies

Devising assessment tasks for large units that embrace academic goals of authenticity and assessment variety can be a challenge. We developed an online Role-Play Assessment Initiative for first year nursing students in bioscience. Students responded to a case study by preparing two role-play dialogues: as a nurse with the patient, and between two nurses. The aims were to assess whether the students could: 1) understand the underlying disease process (pathophysiology) and relate it to clinical practice; 2) use language appropriate for lay and medical conversation; and 3) apply information using active learning. We conducted a student survey using quantitative questions (Likert scale: 1=strongly disagree to 5=strongly agree), and qualitative questions. 65 completed surveys were received. 80% of respondents agreed (includes agree or strongly agree) that it was a useful way to learn and understand pathophysiology of the case study. 86% agreed that it was useful to apply pathophysiology from lectures to a clinical setting. Overall, students found it enjoyable, which is beneficial for enhanced student engagement, and agreed that it allowed them to work well in a group (74% and 85%, respectively). Most qualitative suggestions for improvement related to group work, despite the encouraging response to group work in quantitative questions. Most positive comments surrounded different communication with a nurse compared with a patient. These results demonstrate that students developed deeper understanding of pathophysiology through active learning and were able to expand their nursing career skills during the role-play. Learning using role-play to simulate the workforce has fostered active learning.

Teaching and assessment of prescribing medicines : how does pharmacy perform?

BACKGROUND Prescribing is a complex task, requiring specific knowledge and skills combined with effective, context-specific clinical reasoning. Prescribing errors can result in significant morbidity and mortality. For all professions with prescribing rights, a clear need exists to ensure students graduate with a well-defined set of prescribing skills, which will contribute to competent prescribing. AIM To describe the methods employed to teach and assess the principles of effective prescribing across five non-medical professions at Queensland University of Technology. METHOD The NPS National Prescribing Competencies Framework (PCF) was used as the prescribing standard. A curriculum mapping exercise was undertaken to determine how well the PCF was addressed across the disciplines of paramedic science, pharmacy, podiatry, nurse practitioner and optometry. Identified gaps in teaching and/or assessment were noted. RESULTS Prescribing skills and knowledge are taught and assessed using a range of methods across disciplines. A multi-modal approach is employed by all disciplines. The Pharmacy discipline uses more tutorial sessions to teach prescribing principles and relies less on case studies and clinical appraisal to assess prescribing when compared to other disciplines. Within the pharmacy discipline approximately 90% of the PCF competencies are taught and assessed. This compares favourably with the other disciplines. CONCLUSION Further work is required to establish a practical, effective approach to the assessment of prescribing competence especially between the university and clinical settings. Effective and reliable assessment of prescribing undertaken by students in diverse settings remains challenging.

Temporal trends and bioavailability assessment of heavy metals in the sediments of Deception Bay, Queensland, Australia

Thirteen sites in Deception Bay, Queensland, Australia were sampled three times over a period of 7 months and assessed for contamination by a range of heavy metals, primarily As, Cd, Cr, Cu, Pb and Hg. Fraction analysis, enrichment factors and Principal Components Analysis-Absolute Principal Component Scores (PCA-APCS) analysis were conducted in order to identify the potential bioavailability of these elements of concern and their sources. Hg and Te were identified as the elements of highest enrichment in Deception Bay while marine sediments, shipping and antifouling agents were identified as the sources of the Weak acid Extractable Metals (WE-M), with antifouling agents showing long residence time for mercury contamination. This has significant implications for the future of monitoring and regulation of heavy metal contamination within Deception Bay.

Assessment of the short-term success of a translocation of lesser short-tailed bats Mystacina tuberculata

Translocation is a powerful tool that has been used in the conservation of a wide range of taxa. However, few translocations of bats have been attempted and we know of no successes. The few translocations which have been attempted have either failed due to dispersal from the release site or have not been monitored sufficiently to determine the cause of failure. We assessed the short-term success of a translocation of lesser short-tailed bats Mystacina tuberculata by the New Zealand Department of Conservation, where 3 release methods were used to minimise dispersal or mortality: bats were juveniles, were maintained in captivity at the release site, and were provided with supplementary food and roosts following release. Success was assessed by determining if founders remained at the release site and maintained condition (weight). Recapture showed that at least 9 of the 20 bats remained at the release site 232 d after release. There was weak evidence that bats lost weight, although final weights were comparable to those of bats from a natural population. However, all bats caputred 8 mo after release had damaged, infected ears and some were balding. The problem was treated but recurred, and bats were returned to captivity. Our results are th first to demonstrate that translocated bats can remain at their release site and survive. However, disease may be an issue in future translocations.

The contribution of major depression to the global burden of ischemic heart disease : a comparative risk assessment

Background Cardiovascular disease and mental health both hold enormous public health importance, both ranking highly in results of the recent Global Burden of Disease Study 2010 (GBD 2010). For the first time, the GBD 2010 has systematically and quantitatively assessed major depression as an independent risk factor for the development of ischemic heart disease (IHD) using comparative risk assessment methodology. Methods A pooled relative risk (RR) was calculated from studies identified through a systematic review with strict inclusion criteria designed to provide evidence of independent risk factor status. Accepted case definitions of depression include diagnosis by a clinician or by non-clinician raters adhering to Diagnostic and Statistical Manual of Mental Disorders (DSM) or International Classification of Diseases (ICD) classifications. We therefore refer to the exposure in this paper as major depression as opposed to the DSM-IV category of major depressive disorder (MDD). The population attributable fraction (PAF) was calculated using the pooled RR estimate. Attributable burden was calculated by multiplying the PAF by the underlying burden of IHD estimated as part of GBD 2010. Results The pooled relative risk of developing IHD in those with major depression was 1.56 (95% CI 1.30 to 1.87). Globally there were almost 4 million estimated IHD disability-adjusted life years (DALYs), which can be attributed to major depression in 2010; 3.5 million years of life lost and 250,000 years of life lived with a disability. These findings highlight a previously underestimated mortality component of the burden of major depression. As a proportion of overall IHD burden, 2.95% (95% CI 1.48 to 4.46%) of IHD DALYs were estimated to be attributable to MDD in 2010. Eastern Europe and North Africa/Middle East demonstrate the highest proportion with Asia Pacific, high income representing the lowest. Conclusions The present work comprises the most robust systematic review of its kind to date. The key finding that major depression may be responsible for approximately 3% of global IHD DALYs warrants assessment for depression in patients at high risk of developing IHD or at risk of a repeat IHD event.

Jet and flash imprint defectivity - Assessment and reduction for semiconductor applications

Defectivity has been historically identified as a leading technical roadblock to the implementation of nanoimprint lithography for semiconductor high volume manufacturing. The lack of confidence in nanoimprint's ability to meet defect requirements originates in part from the industry's past experiences with 1 × lithography and the shortage in enduser generated defect data. SEMATECH has therefore initiated a defect assessment aimed at addressing these concerns. The goal is to determine whether nanoimprint, specifically Jet and Flash Imprint Lithography from Molecular Imprints, is capable of meeting semiconductor industry defect requirements. At this time, several cycles of learning have been completed in SEMATECH's defect assessment, with promising results. J-FIL process random defectivity of < 0.1 def/cm2 has been demonstrated using a 120nm half-pitch template, providing proof of concept that a low defect nanoimprint process is possible. Template defectivity has also improved significantly as shown by a pre-production grade template at 80nm pitch. Cycles of learning continue on feature sizes down to 22nm. © 2011 SPIE.

The clinical utility of the Cornell Scale for Depression in Dementia as a routine assessment in nursing homes

Objective To examine the clinical utility of the Cornell Scale for Depression in Dementia (CSDD) in nursing homes. Setting 14 nursing homes in Sydney and Brisbane, Australia. Participants 92 residents with a mean age of 85 years. Measurements Consenting residents were assessed by care staff for depression using the CSDD as part of their routine assessment. Specialist clinicians conducted assessment of depression using the Semi-structured Clinical Diagnostic Interview for DSM-IV-TR Axis I Disorders for residents without dementia or the Provisional Diagnostic Criteria for Depression in Alzheimer Disease for residents with dementia to establish expert clinical diagnoses of depression. The diagnostic performance of the staff completed CSDD was analyzed against expert diagnosis using receiver operating characteristic (ROC) curves. Results The CSDD showed low diagnostic accuracy, with areas under the ROC curve being 0.69, 0.68 and 0.70 for the total sample, residents with dementia and residents without dementia, respectively. At the standard CSDD cutoff score, the sensitivity and specificity were 71% and 59% for the total sample, 69% and 57% for residents with dementia, and 75% and 61% for residents without dementia. The Youden index (for optimizing cut-points) suggested different depression cutoff scores for residents with and without dementia. Conclusion When administered by nursing home staff the clinical utility of the CSDD is highly questionable in identifying depression. The complexity of the scale, the time required for collecting relevant information, and staff skills and knowledge of assessing depression in older people must be considered when using the CSDD in nursing homes.

Assessment of the effects of CT dose in averaged x-ray CT images of a dose-sensitive polymer gel

The signal-to-noise ratio achievable in x-ray computed tomography (CT) images of polymer gels can be increased by averaging over multiple scans of each sample. However, repeated scanning delivers a small additional dose to the gel which may compromise the accuracy of the dose measurement. In this study, a NIPAM-based polymer gel was irradiated and then CT scanned 25 times, with the resulting data used to derive an averaged image and a "zero-scan" image of the gel. Comparison between these two results and the first scan of the gel showed that the averaged and zero-scan images provided better contrast, higher contrast-to- noise and higher signal-to-noise than the initial scan. The pixel values (Hounsfield units, HU) in the averaged image were not noticeably elevated, compared to the zero-scan result and the gradients used in the linear extrapolation of the zero-scan images were small and symmetrically distributed around zero. These results indicate that the averaged image was not artificially lightened by the small, additional dose delivered during CT scanning. This work demonstrates the broader usefulness of the zero-scan method as a means to verify the dosimetric accuracy of gel images derived from averaged x-ray CT data.