Effect of different surface profile on wear of rail steel (AS1085.1) used in Australian heavy-haul railways

The extreme diversity of conditions acting on railways necessitates a variety of experimental approaches to study the critical wear mechanisms that present themselves at the contact interface. This work investigates the effects of contact pressure and geometry in rolling-contact wear tests by using discs with different radii of curvature to simulate the varying contact conditions that may be typically found in the field. It is commonly adapted to line contact interface as it has constant contact pressure. But practical scenario of the rail wheel interface, the contact area increase and contact pressure change as tracks worn off. The tests were conducted without any significant amount of traction, but micro slip was still observed due to contact deformation. Moreover, variation of contact pressure was observed due to contact patch elongation and diameter reduction. Rolling contact fatigue, adhesive and sliding wear were observed on the curved contact interface. The development of different wear regimes and material removal phenomena were analysed using microscopic images in order to broaden the understanding of the wear mechanisms occurring in the rail-wheel contact.

Awareness and knowledge of Human Papillomavirus (HPV) among ethnically diverse women varying in generation status

Although Human papillomavirus (HPV) is a common sexually transmitted infection, there is limited knowledge of HPV with ethnic/racial minorities experiencing the greatest disparities. This cross-sectional study used the most recent available data from the California Health Interview Survey to assess disparities in awareness and knowledge of HPV among ethnically/racially diverse women varying in generation status (N = 19,928). Generation status emerged as a significant predictor of HPV awareness across ethnic/racial groups, with 1st generation Asian-Americans and 1st and 2nd generation Latinas reporting the least awareness when compared to same-generation White counterparts. Also, generation status was a significant predictor of HPV knowledge, but only for Asian-Americans. Regardless of ethnicity/race, 1st generation women reported lowest HPV knowledge when compared to 2nd and 3rd generation women. These findings underscore the importance of looking at differences within and across ethnic/racial groups to identify subgroups at greatest risk for poor health outcomes. In particular, we found generation status to be an important yet often overlooked factor in the identification of health disparities.

Pedestrian Crashes in Ethiopia: Identification of contributing factors through modelling of exposure and road environment variables

Pedestrian safety is a critical issue in Ethiopia. Reports show that 50 to 60% of traffic fatality victims in the country are pedestrians. The primary aim of this research was to examine the possible causes of and contributing factors to crashes with pedestrians in Ethiopia, and improve pedestrian safety by recommending possible countermeasures. The secondary aim was to develop appropriate pedestrian crash models for two-way two-lane rural roads and roundabouts in the capital city of Ethiopia. This research uses quantitative methods throughout the process of the investigation. The research has applied various statistical methods. The results of this research support the idea that geometric and operational features have significant influence on pedestrian safety and crashes. Accordingly, policies and strategies are needed to safeguard pedestrians in Ethiopia.

Bhutanese eighth grade students' and teachers' perceptions of their classroom learning environment in relation to the new mathematics curriculum

This thesis examined how Bhutanese eighth grade students and teachers perceived their classroom learning environment in relation to a new standards-based mathematics curriculum. Data were gathered from administering surveys to a sample of 608 students and 98 teachers, followed by semi-structured interviews with selected participants. The findings of the study indicated that participants generally perceived their learning environments favorably. However, there were differences in terms of gender, school level, and school location. The study provides teachers, educational leaders, and policy-makers in Bhutan new insights into students' and teachers' perceptions of their mathematics classroom environments.

The Trans-Pacific Partnership, the environment, and climate change

The Trans-Pacific Partnership (TPP) is a sweeping, plurilateral free-trade agreement spanning the Pacific Rim.The ongoing, secretive treaty negotiations involve Australia and New Zealand; countries from South East Asia such as Brunei Darussalam, Malaysia, Singapore and Vietnam; the South American nations of Peru and Chile; and the members of the 1994 North American Free Trade Agreement, Canada, Mexico and the United States. There has also been some discussion as to whether Japan should be included in the negotiations.

Somewhere between haste and delay... Investigating the interactions of road users and pedestrians in a dynamic rail level crossing environment

There are currently 23,500 level crossings in Australia, broadly divided into one of two categories: active level crossings which are fully automatic and have boom barriers, alarm bells, flashing lights, and pedestrian gates; and passive level crossings, which are not automatic and aim to control road and pedestrianised walkways solely with stop and give way signs. Active level crossings are considered to be the gold standard for transport ergonomics when grade separation (i.e. constructing an over- or underpass) is not viable. In Australia, the current strategy is to annually upgrade passive level crossings with active controls but active crossings are also associated with traffic congestion, largely as a result of extended closure times. The percentage of time level crossings are closed to road vehicles during peak periods increases with the rise in the frequency of train services. The popular perception appears to be that once a level crossing is upgraded, one is free to wipe their hands and consider the job done. However, there may also be environments where active protection is not enough, but where the setting may not justify the capital costs of grade separation. Indeed, the associated congestion and traffic delay could compromise safety by contributing to the risk taking behaviour by motorists and pedestrians. In these environments it is important to understand what human factor issues are present and ask the question of whether a one size fits all solution is indeed the most ergonomically sound solution for today’s transport needs.

Bricolage and firm performance: The moderating role of the environment

The behavioral theory of “entrepreneurial bricolage” attempts to understand what entrepreneurs do when faced with challenges and constraints. Most research about bricolage, defined as “making do by applying combinations of the resources at hand to new problems and opportunities” (Baker & Nelson 2005: 333), has been qualitative and inductive (Garud & Karnoe, 2003). Although this has created a small body of rich descriptions and interesting insights, little deductive theory has been developed and the relationship between bricolage and firm performance has not been systematically tested. In particular, prior research has suggested bricolage can have both beneficial and harmful effects. Ciborra’s (1996) study of Olivetti suggested that bricolage helped Olivetti to adapt, but simultaneously constrained firm effectiveness. Baker & Nelson (2005) suggested that bricolage may be harmful at very high levels, but more helpful if used judiciously. Other research suggests that firm environments may play an important role in shaping the outcomes of bricolage (Fisher, 2012). In this paper, we theorize and provide preliminary test of the bricolage-performance relationship and how it is affected by environmental dynamism.

Buckling behaviour and design of tapered steel lighting masts

Tapered tubular steel masts are commonly used to support floodlights in a range of applications. The design of these slender tapered masts requires a rational elastic flexural buckling analysis as the thickness also varies with height. Therefore a series of finite element analyses of tapered masts with varying geometry parameters was conducted to develop an elastic flexural buckling load formula. This paper briefly discusses the design methods, and then presents the details of the finite element analyses and the results. 1–Associate Professor of Civil Engineering, and Director, Physical Infrastructure Centre 2–Former BE (Civil) Student, QUT

Influence of interlayer properties on the blast performance of laminated glass panels

This paper investigates the influence of interlayer properties on the blast performance of laminated glass (LG) panels. A parametric study is carried out by varying the thickness and Young’s modulus (E) of the interlayer under two different blast loads. Results indicate the existence of a critical interlayer thickness (or E) that causes the onset of interlayer failure. This should be achieved in the design to enhance energy absorption, reduce support reactions and initiate a safer failure mode. Present findings provide information to achieve such design targets and enable safe and efficient performance of LGs under credible blast loads.

Influence of structural sealant joints on the blast performance of laminated glass panels

This paper investigates the influence of structural sealant joints on the blast performance of laminated glass (LG) panels, using a comprehensive numerical procedure. A parametric study was carried out by varying the width, thickness and the Young’s modulus (E) of the structural silicone sealant joints and the behavior of the LG panel was studied under two different blast loads. Results show that these parameters influence the blast response of LG panels, especially under the higher blast load. Sealant joints that are thicker, have smaller widths and lower E values increase the flexibility at the supports and hence increase the energy absorption of the LG panel while reducing the support reactions. Results also confirmed that sealant joints designed according to current standards perform well under blast loads. Modeling techniques presented in this paper could be used to complement and supplement the guidance in existing design standards. The new information generated in this paper will contribute towards safer and more economical designs of entire facade systems including window glazing, frames and supporting structures.

Mathematics knowledge for teaching and the classroom environment

This study investigated the classroom environment in an underperforming mathematics classroom. The objectives were: (1) to investigate the classroom environment and identify influences upon it, and (2) to further explore those influences (i.e., teacher knowledge). This was completed using a diachronic case study approach in which data were gathered during lesson observations and coaching sessions. These data were analysed to describe and exemplify the classroom environment, then further described against forms of teacher knowledge. Conjectures regarding the importance of teacher knowledge of content were made which formed a base for developing a model of teacher planning and pedagogy.

Curtains and the Soft Architecture of the American Postwar Domestic Environment

This article investigates the role of “soft architecture” and interior effects—including window treatments, textiles, and electric lighting—in the physcial and social construction of the postwar domestic environment in the USA. In this period the American home became an increasingly visual and visible space, defined more by the view out and the view in than by traditional conditions of domestic enclosure. Popular how-to columns and home decoration articles offered homemakers a variety of mechanisms for sustaining the appearance and psychological comfort of the modern domestic setting. Examining a range of popular decorative strategies used to mediate residential picture windows and window walls, this study challenges the deep-seated cultural and disciplinary biases associated with both the design and study of domestic architecture and interiors. Drawing upon historical documents and contemporary theorizations of the interior, this paper argues for the agency of “soft architecture” in the domestication of modern residential architecture.

The IFITM5 mutation c.-14C > T results in an elongated transcript expressed in human bone; And causes varying phenotypic severity of osteogenesis imperfecta type V

Background The genetic mutation resulting in osteogenesis imperfecta (OI) type V was recently characterised as a single point mutation (c.-14C > T) in the 5' untranslated region (UTR) of IFITM5, a gene encoding a transmembrane protein with expression restricted to skeletal tissue. This mutation creates an alternative start codon and has been shown in a eukaryotic cell line to result in a longer variant of IFITM5, but its expression has not previously been demonstrated in bone from a patient with OI type V. Methods Sanger sequencing of the IFITM5 5' UTR was performed in our cohort of subjects with a clinical diagnosis of OI type V. Clinical data was collated from referring clinicians. RNA was extracted from a bone sample from one patient and Sanger sequenced to determine expression of wild-type and mutant IFITM5. Results: All nine subjects with OI type V were heterozygous for the c.-14C > T IFITM5 mutation. Clinically, there was heterogeneity in phenotype, particularly in the manifestation of bone fragility amongst subjects. Both wild-type and mutant IFITM5 mRNA transcripts were present in bone. Conclusions The c.-14C > T IFITM5 mutation does not result in an RNA-null allele but is expressed in bone. Individuals with identical mutations in IFITM5 have highly variable phenotypic expression, even within the same family.

Susceptibility to ankylosing spondylitis in twins: The role of genes, HLA, and the environment

Objective To determine the relative effects of genetic and environmental factors in susceptibility to ankylosing spondylitis (AS). Methods Twins with AS were identified from the Royal National Hospital for Rheumatic Diseases database. Clinical and radiographic examinations were performed to establish diagnoses, and disease severity was assessed using a combination of validated scoring systems. HLA typing for HLA-B27, HLA-B60, and HLA-DR1 was performed by polymerase chain reaction with sequence- specific primers, and zygosity was assessed using microsatellite markers. Genetic and environmental variance components were assessed with the program Mx, using data from this and previous studies of twins with AS. Results Six of 8 monozygotic (MZ) twin pairs were disease concordant, compared with 4 of 15 B27-positive dizygotic (DZ) twin pairs (27%) and 4 of 32 DZ twin pairs overall (12.5%). Nonsignificant increases in similarity with regard to age at disease onset and all of the disease severity scores assessed were noted in disease-concordant MZ twins compared with concordant DZ twins. HLA-B27 and B60 were associated with the disease in probands, and the rate of disease concordance was significantly increased among DZ twin pairs in which the co- twin was positive for both B27 and DR1. Additive genetic effects were estimated to contribute 97% of the population variance. Conclusion Susceptibility to AS is largely genetically determined, and the environmental trigger for the disease is probably ubiquitous. HLA-B27 accounts for a minority of the overall genetic susceptibility to AS.