Ratcheting and wear behavior of Australian rail steel: Experimental investigation of material properties and sampling method

To The ratcheting behavior of high-strength rail steel (Australian Standard AS1085.1) is studied in this work for the purpose of predicting wear and damage to the rail surface. Historically, researchers have used circular test coupons obtained from the rail head to conduct cyclic load tests, but according to hardness profile data, considerable variation exists across the rail head section. For example, the induction-hardened rail (AS1085.1) shows high hardness (400-430 HV100) up to four-millimeters into the rail head’s surface, but then drops considerably beyond that. Given that cyclic test coupons five millimeters in diameter at the gauge area are usually taken from the rail sample, there is a high probability that the original surface properties of the rail do not apply across the entire test coupon and, therefore, data representing only average material properties are obtained. In the literature, disks (47 mm in diameter) for a twin-disk rolling contact test machine have been obtained directly from the rail sample and used to validate rolling contact fatigue wear models. The question arises: How accurate are such predictions? In this research paper, the effect of rail sampling position on the ratcheting behavior of AS1085.1 rail steel was investigated using rectangular shaped specimens. Uniaxial stress-controlled tests were conducted with samples obtained at four different depths to observe the ratcheting behaviour of each. Micro-hardness measurements of the test coupons were carried out to obtain a constitutive relationship to predict the effect of depth on the ratcheting behaviour of the rail material. This work ultimately assists the selection of valid material parameters for constitutive models in the study of rail surface ratcheting.

Experimental investigation of wear modes of hardened rail material used in Australian heavy-haul railways

This work investigates the effects of contact pressure and geometry in rolling-contact wear tests by using discs with different radii of curvature to simulate the varying contact conditions that may be typically found in the field. The tests were conducted without any significant amount of traction, but micro slip was still observed due to contact deformation. Moreover, variation of contact pressure was observed due to contact patch elongation and diameter reduction. Rolling contact fatigue, adhesive and sliding wear were observed on the curved contact interface. The development of different wear regimes and material removal phenomena were analyzed using microscopic images in order to broaden the understanding of the wear mechanisms occurring in the rail-wheel contact.

Enriching architectural design education through interactive displays and local community engagement

Designers have a social responsibility to deal with the needs, issues, and problems that their clients and communities are confronted with. Students of design require opportunities to reflect on their role as social facilitators to develop an attitude towards community engagement through different phases and aspects of their careers. However, current design courses are challenged by compressed timeframes and fragmented scenarios of different academic requirements that do not actively teach community engagement. This paper outlines a participatory and technological approach that was employed to address these issues within the teaching of Architecture and Urban Design at the Queensland University of Technology, Brisbane, Australia. A multi-phase community based research project with actual stakeholders was implemented over a two-year period. Approximately 150 students in the final year of the Bachelor of Design-Architecture; 10 students in the Master of Architecture and 15 students in the Master of Design-Urban Design have informed and influenced each others’ learning through the teaching and research nexus facilitated by this project. The technical approach was implemented in form of a bespoke digital platform that supported the display and discussion of digital media on a series of interactive touch walls. The platform allowed students to easily upload their final designs onto large interactive surfaces, where visitors could explore the media and provide comments. Through the use of this technical platform and the introduction of neogeography, students have been able to broaden their level of interaction and support their learning experience through external structured and unstructured feedback from the local community. Students have not only been exposed to community representatives, but they also have been working in parallel on a specific case study providing each other, across different years and courses, material for reflection and data to structure their design activities.

Palissya: A global review and reassessment of Eastern Gondwanan material

The conifer genus Palissya is reviewed giving special attention to assessing the reliability of Gondwanan material referred to this genus. The collection localities of Australasian specimens are mapped on palaeogeographic reconstructions of Eastern Gondwana at relevant times between 179 Ma and 119 Ma. Australasian and other Gondwanan material previously referred to Palissya is considered to differ substantially from the generic diagnosis. Specimens from the Toarcian of Australasia are shown to be allied to Knezourocarpon; this genus is only known from the Toarcian of eastern Australia. Middle Jurassic–Lower Cretaceous Australasian specimens previously referred to Palissya are likely allied to the Knezourocarponaceae fam. nov. The higher taxonomic affinity of this family is unknown but broadly, its structure is suggestive of ginkgoalean or pteridospermous affiliation. Southern hemisphere specimens were probably catkin-like and megascopically very different from the northern hemisphere Palissya and the two groups are unlikely to be closely related. Consequently, genuine Palissya cones and foliage appear to be restricted to the Rhaetian–Lower Jurassic of the northern hemisphere.

Grant application: QUT Learning and Teaching scheme 2012 Cracking the Code - A checklist to complement CRAs for first year Justice students.

Widening participation brings with it increasing diversity, increased variation in the level of academic preparedness (Clarke, 2011; Nelson, Clarke, & Kift 2010). Cultural capital coupled with negotiating the academic culture creates an environment based on many assumptions about academic writing and university culture. Variations in staff and student expectations relating to the teaching and learning experience is captured in a range of national and institutional data (AUSSE, CEQ, LEX). Nationally, AUSSE data (2009) indicates that communication, writing, speaking and analytic skills, staff expectations are quite a bit higher than students. The research team noted a recognisable shift in the changing cohort of students and their understanding and engagement with feedback and CRAs, as well as variations in teaching staff and student expectations. The current reality of tutor and student roles is that: - Students self select when/how they access lectures and tutorials. - Shorter tutorial times result in reduced opportunity to develop rapport with students. - CRAs are not always used consistently by staff (different marking styles and levels of feedback). - Marking is not always undertaken by the student’s tutor/lecturer. - Student support services might be recommended to students once a poor grade has been given. Students can perceive this as remedial and a further sense of failure. - CRA sheet has a mark /grade attached to it. Stigma attached to low mark. Hard to focus on the CRA feedback with a poor mark etched next to it. - Limited opportunities for sessionals to access professional development to assist with engaging students and feedback. - FYE resources exist, however academic time is a factor in exploring and embedding these resources. Feedback is another area with differing expectations and understandings. Sadler (2009) contends that students are not equipped to decode the statements properly. For students to be able to apply feedback, they need to understand the meaning of the feedback statement. They also need to identify, the particular aspects of their work that need attention. The proposed Checklist/guide would be one page and submitted with each assessment piece thereby providing an interface to engage students and tutors in managing first year understandings and expectations around CRAs, feedback, and academic practice.

Implementing a context-based environmental science unit in the middle years: Teaching and learning at the creek

Engaging middle-school students in science continues to be a challenge in Australian schools. One initiative that has been tried in the senior years but is a more recent development in the middle years is the context-based approach. In this ethnographic study, we researched the teaching and learning transactions that occurred in one 9th grade science class studying a context-based Environmental Science unit that included visits to the local creek for 11 weeks. Data were derived from field notes, audio and video recorded conversations, interviews, student journals and classroom documents with a particular focus on two selected groups of students. This paper presents two assertions that highlight pedagogical approaches that contributed to learning. Firstly, spontaneous teaching episodes created opportunities for in-the-moment questioning by the teacher that led to students’ awareness of environmental issues and the scientific method; secondly, group work using flip cameras afforded opportunities for students to connect the science concepts with the context. Furthermore, students reported positively about the unit and expressed their appreciation for the opportunity to visit the creek frequently. This findings from this study should encourage teachers to take students into the real-world field for valuable teaching and learning experiences that are not available in the formal classroom.

Rethinking Culture and Diversity in Early Childhood Preservice Teacher Education: Looking at Teaching and Learning Through an Interdisciplinary Lens

Early Childhood Education (ECE) has a long history of building foundations for children to achieve their full potential, enabling parents to participate in the economy while children are cared for, addressing poverty and disadvantage, and building individual, community and societal resources. In so doing, ECE has developed a set of cultural practices and ways of knowing that shape the field and the people who work within it. ECE, consequently, is frequently described as unique and special (Moss, 2006; Penn, 2011). This works to define and distinguish the field while, simultaneously, insulating it from other contexts, professions, and ideas. Recognising this dualism illuminates some of the risks and challenges of operating in an insular and isolated fashion. In the 21st century, there are new challenges for children, families and societies to which ECE must respond if it is to continue to be relevant. One major issue is how ECE contributes to transition towards more sustainable ways of living. Addressing this contemporary social problem is one from which Early Childhood teacher education has been largely absent (Davis & Elliott, 2014), despite the well recognised but often ignored role of education in contributing to sustainability. Because of its complexity, sustainability is sometimes referred to as a ‘wicked problem’ (Rittel & Webber, 1973; Australian Public Service Commission, 2007) requiring alternatives to ‘business as usual’ problem solving approaches. In this chapter, we propose that addressing such problems alongside disciplines other than Education enables the Early Childhood profession to have its eyes opened to new ways of thinking about our work, potentially liberating us from the limitations of our “unique” and idiosyncratic professional cultures. In our chapter, we focus on understandings of culture and diversity, looking to broaden these by exploring the different ‘cultures’ of the specialist fields of ECE and Design (in this project, we worked with students studying Architecture, Industrial Design, Landscape Architecture and Interior Design). We define culture not as it is typically represented, i.e. in relation to ideas and customs of particular ethnic and language groups, but to the ideas and practices of people working in different disciplines and professions. We assert that different specialisms have their own ‘cultural’ practices. Further, we propose that this kind of theoretical work helps us to reconsider ways in which ECE might be reframed and broadened to meet new challenges such as sustainability and as yet unknown future challenges and possibilities. We explore these matters by turning to preservice Early Childhood teacher education (in Australia) as a context in which traditional views of culture and diversity might be reconstructed. We are looking to push our specialist knowledge boundaries and to extend both preservice teachers and academics beyond their comfort zones by engaging in innovative interdisciplinary learning and teaching. We describe a case study of preservice Early Childhood teachers and designers working in collaborative teams, intersecting with a ‘real-world’ business partner. The joint learning task was the design of an early learning centre based on sustainable design principles and in which early Education for Sustainability (EfS) would be embedded Data were collected via focus group and individual interviews with students in ECE and Design. Our findings suggest that interdisciplinary teaching and learning holds considerable potential in dismantling taken-for-granted cultural practices, such that professional roles and identities might be reimagined and reconfigured. We conclude the chapter with provocations challenging the ways in which culture and diversity in the field of ECE might be reconsidered within teacher education.

A case study of teaching English and multimodality with ICTs: Constraints and possibilities

Current Australian policies and curricular frameworks demand that teachers and students use technology creatively and meaningfully in classrooms to develop students into 21C technological citizens. English teachers and students also have to learn new metalanguage around visual grammar since multimodal tasks often combine creative with critical General Capabilities (GC) with that of the of ICTs and literacy in the Australian Curriculum: English (AC:E). Both teachers and learners come to these tasks with varying degrees of techno-literacy, skills and access to technologies. This paper reports on case-study research following a technology based collaborative professional development (PD) program between a university Lecturer facilitator and English Teachers in a secondary Catholic school. The study found that the possibilities for creative and critical engagement are rich, but there are real grounded constraints such as lack of time, impeding teachers’ ability to master and teach new technologies in classrooms. Furthermore, pedagogical approaches are affected by technical skill levels and school infrastructure concerns which can militate against effective use of ICTs in school settings. The research project was funded by the Brisbane Catholic Education Office and focused on how teachers can be supported in these endeavours in educational contexts as they prepare students of English to be creative global citizens who use technology creatively.

Teaching pragmatics in an EFL context: Implications for coursebook design, teaching and learning

This case study examined the use of global English language teaching coursebooks by five teachers to teach English language use to students in Thailand where English is a foreign language. Despite the complexities of English language use in Thailand, the coursebook and teachers emphasised sets of decontextualised linguistic structures to teach speaking and conversation. The students interpreted and applied the structures in different ways with varied awareness of the effects of their linguistic choices. Teachers were constrained by the coursebook, their understandings of culture, and knowledge of how to teach pragmatics highlighting implications for teacher education and coursebook design.

Child-centered teaching, redemption, and educational identities: A history of the present

Child-centeredness runs a familiar route in educational narratives. From Rousseau to Pestalozzi to Froebel to present day systems of childcare and schooling, childcenteredness is thought to have shifted the treatment of children into closer harmony with their true nature and hence into more sensitive and civilized forms of rearing. The celebratory air surrounding its deployment in education has been pervasive and difficult to contest partly because of the emotive alliances that have been drawn between child-centeredness and progressivism. That is, child-centeredness has been positioned as superseding a harsh, medieval ignorance of children while preventing present-day authoritarian strategies of domination. Child-centeredness is thus presently constituted as a soft space, as a deeply sensitive middle ground, between ignoring children and dominating them completely.

State-formation, teaching techniques, and globalization as aporia

Eleanor Smith [pseudonym], teacher : I was talking to the kids about MacDonalds*/I forget exactly what the context was*/I said ‘‘ah, the Americans call them French fries, and, you know, MacDonalds is an American chain and they call them French fries because the Americans call them French fries’’, and this little Australian kid in the front row, very Australian child, said to me, ‘‘I call them French fries!’’ . . . Um, a fourth grade boy whom I taught in 1993 at this school, the world basketball championships were on . . . Americans were playing their dream machine and the Boomers were up against them . . . and, ah, this boy was very interested in basketball . . . but it’s not in my blood, not in the way cricket is for example . . . Um, Um, and I said to this fellow, ‘‘um, well’’, I said, ‘‘Australia’s up against Dream Machine tomorrow’’. He [Jason, pseudonym] said, ‘‘Ah, you know, Boomers probably won’t win’’. . . . I said, ‘‘Well that’s sport, mate’’. I said, ‘‘You never know in sport. Australia might win’’. And he looked at me and he said, ‘‘I’m not going for Australia, I’m going for America’’. This is from an Australian boy! And I thought so strong is the hype, so strong is the, is the, power of the media, etc., that this boy is not [pause], I can’t tell you how outraged I was. Here’s me as an Australian and I don’t even support basketball, it’s not even my sport, um, but that he would respond like that because of the power of the American machine that’s converting kids’ minds, the way they think, where they’re putting their loyalties, etc. I was just appalled, but that’s where he was. And when I asked kids for their favourite place, he said Los Angeles.

Pathophysiology team teaching: Bioscientist contribution to knowledge integration in a nursing subject

Bioscience content within undergraduate nursing degrees provides foundational knowledge of pathophysiology, anatomy, physiology, microbiology and pharmacology. However, nursing students often find studying the bioscience components of undergraduate nursing program daunting (Friedel & Treagust 2005, Craft et al. 2013). This is related to factors such as the volume of content, degree of difficulty and insufficient linkage between bioscience concepts and nurses' clinical practice. Students who are unable to conceptualise the relevance of bioscience with nursing subjects and subsequent nursing practice may not appreciate the broader importance of bioscience, and hence may adopt a surface approach to learning (Craft et al. 2013). The aim of this study was to develop a model within Nursing Practice in the Context theory subject, to include a bioscientist lecturing to complement the nursing lecturer, in order to explicitly demonstrate links between physiology, pathophysiology and nursing practice.

Image-based midsole insert design and the material effects on heel plantar pressure distribution during simulated walking loads

The primary objective of this paper is to study the use of medical image-based finite element (FE) modelling in subjectspecific midsole design and optimisation for heel pressure reduction using a midsole plug under the calcaneus area (UCA). Plugs with different relative dimensions to the size of the calcaneus of the subject have been incorporated in the heel region of the midsole. The FE foot model was validated by comparing the numerically predicted plantar pressure with biomechanical tests conducted on the same subject. For each UCA midsole plug design, the effect of material properties and plug thicknesses on the plantar pressure distribution and peak pressure level during the heel strike phase of normal walking was systematically studied. The results showed that the UCA midsole insert could effectively modify the pressure distribution, and its effect is directly associated with the ratio of the plug dimension to the size of the calcaneus bone of the subject. A medium hardness plug with a size of 95% of the calcaneus has achieved the best performance for relieving the peak pressure in comparison with the pressure level for a solid midsole without a plug, whereas a smaller plug with a size of 65% of the calcaneus insert with a very soft material showed minimum beneficial effect for the pressure relief.

#auspol: The hashtag as community, event, and material object for engaging with Australian politics

Critical, loud, highly discursive and polarised; the #auspol hashtag represents a space, an event and a network for politically involved individuals to engage in and with Australian politics and speak to, at and about a variety of involved stakeholders. Contributors declare, debate and often berate each other’s opinions about current Australian politics. The hashtag itself is an important material object and engagement event involved within this performance of political participation. As a long-standing institution in the Twittersphere, and one studied by the authors and their colleagues since its early beginnings (Bruns and Burgess, 2011; Bruns and Stieglitz, 2012; 2013), the #auspol hashtag provides a potent case study through which to explore the discursive and affective dimensions of a hashtag public. This chapter that engages both empirically and theoretically with the use of this particular hashtag on Twitter to provide a qualitatively illustrated case in point for thinking about the long-term use of political hashtags as engagement events.

Creating a standardised teaching and learning framework for social work field placements

Mapping and evaluating a student's progress on placement is a core element of social work education but there has been scant attention to indicate how to effectively create and assess student learning and performance. This paper outlines a project undertaken by the Combined Schools of Social Work to develop a common learning and assessment tool that is being used by all social work schools in Victoria. The paper describes how the Common Assessment Tool (CAT) was developed, drawing on the Australian Association of Social Work Practice Standards, leading to seven key learning areas that form the basis of the assessment of a student's readiness for practice. An evaluation of the usefulness of the CAT was completed by field educators, liaison staff, and students, which confirmed that the CAT was a useful framework for evaluating students' learning goals. The feedback also identified a number of problematic features that were addressed in a revised CAT and rating scale.