From garamut to mobile phone: Communication change in rural Papua New Guinea

This article presents the attitudinal response of rural villagers in Papua New Guinea to mobile telephony, based on a threshold study made during the early stages of its adoption. The research indicates that the introduction of mobile telecommunications has generally been viewed positively, with mobile phones affording social interaction with loved ones. Nonetheless, negative concerns have been strongly felt, notably financial costs and anxiety about mobile phones aiding in the coordination of extramarital liaisons and criminal activities. The communities investigated previously had scant access to modern communication technologies, some still using traditional means such as wooden slit drums, known locally as garamuts. The expansion of mobile network coverage has introduced into communal village life the capability to communicate dyadically and privately at a distance. Investigation into the adoption of mobile phones thus promotes understanding about traditional means of communication and notions of public and private interactions.

Plasma polymerised thin films for flexible electronic applications

The significant advancement and growth of organic and flexible electronic applications demand materials with enhanced properties. This paper reports the fabrication of a nonsynthetic polymer thin film using radio frequency plasma polymerisation of 3,7-dimethyl-1,6-octadien-3-ol. The fabricated optically transparent thin film exhibited refractive index of approximately 1.55 at 500 nm and rate of deposition was estimated to be 40 nm/min. The surface morphology and chemical properties of the thin films were also reported in this paper. The optical band gap of the material is around 2.8 eV. The force of adhesion and Young's modulus of the linalool polymer thin films were measured using force-displacement curves obtained from a scanning probe microscope. The friction coefficient of linalool polymer thin films was measured using the nanoscratch test. The calculated Young's modulus increased linearly with increase in input power while the friction coefficient decreased.

Fabrication of Electronic Materials from Australian Essential Oils

This RIRDC publication reports the findings and recommendations of the RIRDC funded study, "Fabrication of Electronic Materials from Australian Essential Oils". This project was undertaken to facilitate an expansion of the Australian Essential Oils Industry through the development of novel applications in the Electronic and Bio-Materials Industries. The findings presented in this report will provide value broadly across the Australian Essential Oils Industry, and more particularly to the growers involved in the production of tea tree, lavender and other essential oils. Several essential oils, namely tea tree oil, sandalwood oil, eucalyptus oil, alpha-pinene, d-limonene, lavender oil (a separate PhD project) and five major components of tea tree oil were tested. With the exception of sandalwood oil, all oils investigated were successfully polymerised. Importantly, this project determined that it is possible to use an environmentally friendly, inexpensive process of polymerisation to fabricate materials from essential oils in a reproducible manner with properties required by the optics, electronics, protective coatings, and bio-material industries.

Fabrication and characterization of RF plasma polymerized thin films from 3,7-dimethyl-1,6-octadien-3-ol for electronic and biomaterial applications

Poly(linalool) thin films were fabricated using RF plasma polymerisation. All films were found to be smooth, defect-free surfaces with average roughness of 0.44 nm. The FTIR analysis of the polymer showed a notable reduction in –OH moiety and complete dissociation of C=C unsaturation compared to the monomer, and presence of a ketone band absent from the spectrum of the monomer. Poly(linalool) were characterised by chain branching and a large quantity of short polymer chains. Films were optically transparent, with refractive index and extinction coefficient of 1.55 and 0.001 (at 500 nm) respectively, indicating a potential application as an encapsulating (protective) coating for circuit boards. The optical band gap was calculated to be 2.82 eV, which is in the semiconducting energy gap region.

Framing as status or benefits? Consumers’ reactions to hierarchical loyalty program communication

Purpose A fundamental aspect of hierarchical loyalty programs is that some consumers get rewards that others do not. Despite the widespread use of such programs, academics have long debated whether these benefits are outweighed by the potential negative impact of the differential treatment of customers. This study extends our understanding, examining the impact of message framing on consumers’ reactions to hierarchical loyalty structures. Design/methodology/approach Three online studies were conducted. Study 1 uses advertisements to manipulate the message frame’s emphasis (benefits vs. status). Study 2 manipulates consumers’ frame of thought by directing their attention to either changes in benefits or status. Finally, Study 3 uses the proposed framework to reconcile contradictory findings from past research. Findings Low-frequency customers who do not expect to qualify for a superior customer tier tend to reject hierarchical programs when thinking about status. In contrast, when these customers think about concrete rewards, loyalty program messages produce no negative reactions. High-frequency customers are positively affected by communication regardless of the type of benefits framed. Research limitations/implications All studies were done online potentially limiting the external validity of the results. Nevertheless, the impact of message framing on perceptions about the loyalty program seems to be quite robust across different studies and manipulations. Practical implications When communicating with low-frequency customers managers should avoid promising status; customers should instead be motivated based on concrete rewards. High-frequency customers are indifferent to alternative emphasis of communication frames. Originality/value Marketing academics have acknowledged the importance of being able to reward top customers without demotivating light and moderate users. Our research is the first to provide a solution to this issue.

Response: Special communication: Letters to the Editor-in-Chief [Vigorous exercise in clinical practice: balancing risks and benefits]

The effects of different exercise intensities on health have been investigated in several studies in recent years, in which some authors showed greater benefits for vigorous exercise (6) while others did not find any differences (8). An important issue regarding these conflicting results could be the fact that only a few of the studies controlled the effects of different exercise intensities for the overall volume of physical activity, making the evaluation of the available data difficult.

Private mobile phones and public communication drums in rural Papua New Guinea

The voice of a traditional communication drum can be heard over great distances. Yet now in Papua New Guinea (PNG) it is hearing, by phone, the voice of a loved one who has moved far away from home for work, marriage or studies that brings the greatest delight. As recently as 2007, most areas of this Pacific island nation had no form of telephony available. Apart from radio, modern communication forms have been restricted predominantly to the urban areas where only a small percentage of the people reside. Landline telephones, television, Internet, facsimile machines and so on have never reached the majority of the inhabited areas...

Patient preferences for receiving remote communication support for lifestyle physical activity behaviour change: The perspective of patients with musculoskeletal disorders from three hospital services

This study examined patients’ preference ratings for receiving support via remote communication to increase their lifestyle physical activity. Methods People with musculoskeletal disorders ( n=221 of 296 eligible) accessing one of three clinics provided preference ratings for “how much” they wanted to receive physical activity support via five potential communication modalities. The five ratings were generated on a horizontal analogue rating scale (0 represented “not at all”; 10 represented “very much”). Results Most (n=155, 70%) desired referral to a physical activity promoting intervention. “Print and post” communications had the highest median preference rating (7/10), followed by email and telephone (both 5/10), text messaging (1/10), and private Internet-based social network messages (0/10). Desire to be referred was associated with higher preference for printed materials (coefficient = 2.739, p<0.001), telephone calls (coefficient = 3.000, p<0.001), and email (coefficient = 2.059, p=0.02). Older age was associated with lower preference for email (coefficient = −0.100, p<0.001), texting (coefficient = −0.096, p<0.001), and social network messages (coefficient = −0.065, p<0.001). Conclusion Patients desiring support to be physically active indicated preferences for interventions with communication via print, email, or telephone calls.

Personal health records as sources of productivity evidence

Capturing data from various data repositories and integrating them for productivity improvements is common in modern business organisations. With the well-accepted concept of achieving positive gains through investment in employee health and wellness, organisations have started to capture both employee health and non-health data as Employer Sponsored electronic Personal Health Records (ESPHRs). However, non-health related data in ESPHRs has hardly been taken into consideration with outcomes such as employee productivity potentially being suited for further validation and stimulation of ESPHR usage. Here we analyse selected employee demographic information (age, gender, marital status, and job grade) and health-related outcomes (absenteeism and presenteeism) of employees for evidence-based decision making. Our study considered demographic and health-related outcomes of 700 employees. Surprisingly, the analysis shows that employees with high sick leave rates are also high performers. A factor analysis shows 92% of the variance in the data can be explained by three factors, with the job grade capable of explaining 62% of the variance. Work responsibilities may drive employees to maintain high work performance despite signs of sickness, so ESPHRs should focus attention on high performers. This finding suggests new ways of extracting value from ESPHRs to support organisational health and wellness management to help assure sustainability in organisational productivity.

Relational accountability in Indigenizing visual research for participatory communication

This article argues that an indigenous approach to communication research allows us to re-think academic approaches of engaging in and evaluating participatory communication research. It takes as its case study the Komuniti Tok Piksa project undertaken in the Highlands of Papua New Guinea. The project explores ways in which visual methods when paired with a community action approach embedded within an indigenous framework can be used to facilitate social change through meaningful participation. It involves communities to narrate their experiences in regard to HIV and AIDS and assists them in designing and recording their own messages. Local researchers are trained in using visual tools to facilitate this engagement with the communities.

The use of neurocognitive methods in assessing health communication messages: A systematic review

We review 20 studies that examined persuasive processing and outcomes of health messages using neurocognitive measures. The results suggest that cognitive processes and neural activity in regions thought to reflect self-related processing may be more prominent in the persuasive process of self-relevant messages. Furthermore, activity in the medial prefrontal cortex (MPFC), the superior temporal gyrus, and the middle frontal gyrus were identified as predictors of message effectiveness, with the MPFC accounting for additional variance in behaviour change beyond that accounted for by self-report measures. Incorporating neurocognitive measures may provide a more comprehensive understanding of the processing and outcomes of health messages.

The authentication of electronic evidence

This thesis examines whether the rules for of evidence, which were developed around paper over centuries, are adequate for the authentication of electronic evidence. The history of documentary evidence is examined, and the nature of electronic evidence is explored, particularly recent types of electronic evidence such as social media and 'the Cloud'. The old rules are then critically applied to the varied types of electronic evidence to determine whether or not these old rules are indeed adequate.

The long-run impact of Information and Communication Technology on economic output: The case of Australia

This paper investigates the cointegration and causal relationships between Information and Communication Technology (ICT) and economic output in Australia using data for about five decades. The framework used in this paper is the single-sector aggregate production function, which is the first comprehensive approach of this kind to include ICT and non-ICT capital and other factors to examine long-run Granger causality. The empirical evidence points to a cointegration relationship between ICT capital and output, and implies that ICT capital Granger causes economic output and multifactor productivity, as does non-ICT capital.

On the contribution of information and communication technology to productivity growth in Australia

This paper revisits the so-called ‘ICT-productivity paradox’ from a long-run perspective by using annual Australian data for 1965–2013. It provides estimates of long-run and short-run elasticities of labour productivity with respect to ICT capital deepening, and explores the nature of long-run causality among productivity growth and ICT and non-ICT capital deepening. The estimates of long-run elasticities are derived by employing both time-series and panel data econometric techniques. The empirical results provide strong confirmatory evidence of the long-run impact of ICT capital deepening on labour productivity in Australia.

Electronic Building Passport - Final Report: Project 2 National Energy Efficient Building Project Phase 2

The National Energy Efficient Building Project (NEEBP) Phase One report, published in December 2014, investigated “process issues and systemic failures” in the administration of the energy performance requirements in the National Construction Code. It found that most stakeholders believed that under-compliance with these requirements is widespread across Australia, with similar issues being reported in all states and territories. The report found that many different factors were contributing to this outcome and, as a result, many recommendations were offered that together would be expected to remedy the systemic issues reported. To follow up on this Phase 1 report, three additional projects were commissioned as part of Phase 2 of the overall NEEBP project. This Report deals with the development and piloting of an Electronic Building Passport (EBP) tool – a project undertaken jointly by pitt&sherry and a team at the Queensland University of Technology (QUT) led by Dr Wendy Miller. The other Phase 2 projects cover audits of Class 1 buildings and issues relating to building alterations and additions. The passport concept aims to provide all stakeholders with (controlled) access to the key documentation and information that they need to verify the energy performance of buildings. This trial project deals with residential buildings but in principle could apply to any building type. Nine councils were recruited to help develop and test a pilot electronic building passport tool. The participation of these councils – across all states – enabled an assessment of the extent to which these councils are currently utilising documentation; to track the compliance of residential buildings with the energy performance requirements in the National Construction Code (NCC). Overall we found that none of the participating councils are currently compiling all of the energy performance-related documentation that would demonstrate code compliance. The key reasons for this include: a major lack of clarity on precisely what documentation should be collected; cost and budget pressures; low public/stakeholder demand for the documentation; and a pragmatic judgement that non-compliance with any regulated documentation requirements represents a relatively low risk for them. Some councils reported producing documentation, such as certificates of final completion, only on demand, for example. Only three of the nine council participants reported regularly conducting compliance assessments or audits utilising this documentation and/or inspections. Overall we formed the view that documentation and information tracking processes operating within the building standards and compliance system are not working to assure compliance with the Code’s energy performance requirements. In other words the Code, and its implementation under state and territory regulatory processes, is falling short as a ‘quality assurance’ system for consumers. As a result it is likely that the new housing stock is under-performing relative to policy expectations, consuming unnecessary amounts of energy, imposing unnecessarily high energy bills on occupants, and generating unnecessary greenhouse gas emissions. At the same time, Councils noted that the demand for documentation relating to building energy performance was low. All the participant councils in the EBP pilot agreed that documentation and information processes need to work more effectively if the potential regulatory and market drivers towards energy efficient homes are to be harnessed. These findings are fully consistent with the Phase 1 NEEBP report. It was also agreed that an EBP system could potentially play an important role in improving documentation and information processes. However, only one of the participant councils indicated that they might adopt such a system on a voluntary basis. The majority felt that such a system would only be taken up if it were: - A nationally agreed system, imposed as a mandatory requirement under state or national regulation; - Capable of being used by multiple parties including councils, private certifiers, building regulators, builders and energy assessors in particular; and - Fully integrated into their existing document management systems, or at least seamlessly compatible rather than a separate, unlinked tool. Further, we note that the value of an EBP in capturing statistical information relating to the energy performance of buildings would be much greater if an EBP were adopted on a nationally consistent basis. Councils were clear that a key impediment to the take up of an EBP system is that they are facing very considerable budget and staffing challenges. They report that they are often unable to meet all community demands from the resources available to them. Therefore they are unlikely to provide resources to support the roll out of an EBP system on a voluntary basis. Overall, we conclude from this pilot that the public good would be well served if the Australian, state and territory governments continued to develop and implement an Electronic Building Passport system in a cost-efficient and effective manner. This development should occur with detailed input from building regulators, the Australian Building Codes Board (ABCB), councils and private certifiers in the first instance. This report provides a suite of recommendations (Section 7.2) designed to advance the development and guide the implementation of a national EBP system.