Relationships between major ions in coal seam gas groundwaters: Examples from the Surat and Clarence-Moreton basins

Using a combination of multivariate statistical techniques and the graphical assessment of major ion ratios, the influences on hydrochemical variability of coal seam gas (or coal bed methane) groundwaters from several sites in the Surat and Clarence-Moreton basins in Queensland, Australia, were investigated. Several characteristic relationships between major ions were observed: 1) strong positive linear correlation between the Na/Cl and alkalinity/Cl ratios; 2) an exponentially decaying trend between the Na/Cl and Na/alkalinity ratios; 3) inverse linear relationships between increasing chloride concentrations and decreasing pH for high salinity groundwaters, and; 4) high residual alkalinity for lower salinity waters, and an inverse relationship between decreasing residual alkalinity and increasing chloride concentrations for more saline waters. The interpretation of the hydrochemical data provides invaluable insights into the hydrochemical evolution of coal seam gas (CSG) groundwaters that considers both the source of major ions in coals and the influence of microbial activity. Elevated chloride and sodium concentrations in more saline groundwaters appear to be influenced by organic-bound chlorine held in the coal matrix; a sodium and chloride ion source that has largely been neglected in previous CSG groundwater studies. However, contrastingly high concentrations of bicarbonate in low salinity waters could not be explained, and are possibly associated with a number of different factors such as coal degradation, methanogenic processes, the evolution of high-bicarbonate NaHCO3 water types earlier on in the evolutionary pathway, and variability in gas reservoir characteristics. Using recently published data for CSG groundwaters in different basins, the characteristic major ion relationships identified for new data presented in this study were also observed in other CSG groundwaters from Australia, as well as for those in the Illinois Basin in the USA. This observation suggests that where coal maceral content and the dominant methanogenic pathway are similar, and where organic-bound chlorine is relatively abundant, distinct hydrochemical responses may be observed. Comparisons with published data of other NaHCO3 water types in non-CSG environments suggest that these characteristic major ion relationships described here can: i) serve as an indicator of potential CSG groundwaters in certain coal-bearing aquifers that contain methane; and ii) help in the development of strategic sampling programmes for CSG exploration and to monitor potential impacts of CSG activities on groundwater resources.

Mathematical modelling of gas production and compositional shift of a CSG (coal seam gas) field: Local model development

In this work we discuss the development of a mathematical model to predict the shift in gas composition observed over time from a producing CSG (coal seam gas) well, and investigate the effect that physical properties of the coal seam have on gas production. A detailed (local) one-dimensional, two-scale mathematical model of a coal seam has been developed. The model describes the competitive adsorption and desorption of three gas species (CH4, CO2 and N2) within a microscopic, porous coal matrix structure. The (diffusive) flux of these gases between the coal matrices (microscale) and a cleat network (macroscale) is accounted for in the model. The cleat network is modelled as a one-dimensional, volume averaged, porous domain that extends radially from a central well. Diffusive and advective transport of the gases occurs within the cleat network, which also contains liquid water that can be advectively transported. The water and gas phases are assumed to be immiscible. The driving force for the advection in the gas and liquid phases is taken to be a pressure gradient with capillarity also accounted for. In addition, the relative permeabilities of the water and gas phases are considered as functions of the degree of water saturation.

Designing a quality health information system: Case study analysis of maternal and child health in Papua New Guinea

Papua New Guinea (PNG) is facing what must seem like an insurmountable challenge to deliver quality healthcare servicesfor women living in both rural and urban areas. Glo bal governing bodies and donor agencies including WHO and UN have indicated that PNG does not have an appropriate health information system. Although there are some systems in place, to date, little research has been conducted on improving or resolving the data integrity and integration issues of the existing health information systems and automating the capture of women and newborns information in PNG. This current research study concentrates on the adoption of eHealth, as an innovative tool to strengthen the health information systems in PNG to meet WHO standards. The research targets maternal and child health focussing on child birth records asan exemplar...

Quality of information for quality of life: Healthcare big data analytics

Big data analysis in healthcare sector is still in its early stages when comparing with that of other business sectors due to numerous reasons. Accommodating the volume, velocity and variety of healthcare data Identifying platforms that examine data from multiple sources, such as clinical records, genomic data, financial systems, and administrative systems Electronic Health Record (EHR) is a key information resource for big data analysis and is also composed of varied co-created values. Successful integration and crossing of different subfields of healthcare data such as biomedical informatics and health informatics could lead to huge improvement for the end users of the health care system, i.e. the patients.

Quality-aware review selection based on product feature taxonomy

As of today, user-generated information such as online reviews has become increasingly significant for customers in decision making process. Meanwhile, as the volume of online reviews proliferates, there is an insistent demand to help the users tackle the information overload problem. In order to extract useful information from overwhelming reviews, considerable work has been proposed such as review summarization and review selection. Particularly, to avoid the redundant information, researchers attempt to select a small set of reviews to represent the entire review corpus by preserving its statistical properties (e.g., opinion distribution). However, one significant drawback of the existing works is that they only measure the utility of the extracted reviews as a whole without considering the quality of each individual review. As a result, the set of chosen reviews may consist of low-quality ones even its statistical property is close to that of the original review corpus, which is not preferred by the users. In this paper, we proposed a review selection method which takes review quality into consideration during the selection process. Specifically, we examine the relationships between product features based upon a domain ontology to capture the review characteristics based on which to select reviews that have good quality and preserve the opinion distribution as well. Our experimental results based on real world review datasets demonstrate that our proposed approach is feasible and able to improve the performance of the review selection effectively.

Development of a method to assess the quality of ankle joint reduction in 3D

This project developed a quantitative method for determining the quality of the surgical alignment of the bone fragments after an ankle fracture. The research examined the feasibility of utilising MRI-based bone models versus the gold standard CT-based bone models in order to reduce the amount of ionising radiation the patient is exposed to. In doing so, the thesis reports that there is potential for MRI to be used instead of CT depending on the scanning parameters used to obtain the medical images, the distance of the implant relative to the joint surface, and the implant material.

Mothers' perception of the quality of childhood sibling relationships affected by disability

The quality of the sibling relationship has an important role in the development of psychosocial skills throughout childhood. While the literature suggests that the significance of sibling relationships is heightened when one sibling has a disability, empirical findings about the quality of these relationships are few and inconsistent. The present study aimed to address this gap, by investigating mothers’ perspectives about the impact of disability on the quality of the childhood sibling relationship. Forty-one mothers with a child with disability, and 48 with no children with disability completed an online questionnaire that assessed the amount of perceived warmth/closeness and conflict in their children’s sibling relationship. It was found that while there were no differences in reported conflict between the two groups, mothers with a child with disability reported significantly lower warmth/closeness in their children’s sibling relationship than mothers without a child with disability. Demographic variables such as number of children, gender grouping, target gender, target age and age order did not moderate this result. Mothers overall reported significantly more warmth/closeness for younger rather than older children, and more conflict when the sibling was younger than the target child as opposed to older than them. Clinical implications for intervention are discussed.

Technical quality

Close attention to technical quality or image optimization in transthoracic echocardiography (TTE) is important for the acquisition of high-quality diagnostic images and to ensure that measurements are accurately performed. For this purpose, the echocardiographer must be familiar with all the controls on the ultrasound machine that can be manipulated to optimize the two-dimensional (2D) images, color Doppler images, and spectral Doppler traces...

Supporting quality timely PhD completions: Delivering research outcomes

The case study used a three-phase organising process to explain how design and implementation of an accessible and interactive electronic thesis submission form streamlined quality assurance of theses and their timely dissemination via an online thesis repository. The quality of the theses submitted is assured by key academics in their final sign off of the form. It describes the role of shared cultural value in ensuring ready acceptance of a change process within one university and highlights the value of communication in achieving positive change. Quality standards as defined by an external policy framework are shown to be interpreted at the local university level to enhance the PhD completion experience. It describes the impact of moving quality assurance processes to an online environment on research activities; considering the potential for quality assurance to improve universities’ teaching, learning and research activities by facilitating academic oversight of the quality assurance process and reducing the overheads associated with monitoring, measuring and reporting on quality assurance measures.

The impact of personality and workplace belongingness on mental health workers’ professional quality of life

Objectives Mental health workers are constantly exposed to their clients’ stories of distress and trauma. While listening to these stories can be emotionally draining, professionals in this field still derive pleasure from their work. This study examined the role of personality and workplace belongingness in predicting compassion satisfaction, secondary traumatic stress, and burnout in mental health professionals. Methods Mental health staff (N = 156) working in a counselling service completed a questionnaire that included measures relating to professional quality of life, the Five-Factor Model of personality, workplace belongingness, as well as questions relating to the participants’ demographic profile, work roles and trauma history. Results The results indicated that, high levels of emotional stability (low neuroticism), extraversion, agreeableness, conscientiousness, and being connected at work, are essential factors that promote the professional quality of life of mental health workers. Specifically, workplace belongingness was the strongest predictor of compassion satisfaction and low levels of burnout, while neuroticism was the strongest predictor of secondary traumatic stress. Conclusions Important implications from this study include: (1) encouraging mental health staff to increase self-awareness of their dispositional characteristics and how their personalities affect their wellbeing at work, and; (2) encouraging management to facilitate practices where mental health workers feel connected, respected, and supported in their organisation.

Robust principal component analysis in water quality index development

Some statistical procedures already available in literature are employed in developing the water quality index, WQI. The nature of complexity and interdependency that occur in physical and chemical processes of water could be easier explained if statistical approaches were applied to water quality indexing. The most popular statistical method used in developing WQI is the principal component analysis (PCA). In literature, the WQI development based on the classical PCA mostly used water quality data that have been transformed and normalized. Outliers may be considered in or eliminated from the analysis. However, the classical mean and sample covariance matrix used in classical PCA methodology is not reliable if the outliers exist in the data. Since the presence of outliers may affect the computation of the principal component, robust principal component analysis, RPCA should be used. Focusing in Langat River, the RPCA-WQI was introduced for the first time in this study to re-calculate the DOE-WQI. Results show that the RPCA-WQI is capable to capture similar distribution in the existing DOE-WQI.

Evaluation of electrocoagulation for the pre-treatment of coal seam water

This work explored the applicability of electrocoagulation (EC) using aluminium electrodes for the removal of contaminants which can scale and foul reverse osmosis membranes from a coal seam (CS) water sample, predominantly comprising sodium chloride, and sodium bicarbonate. In general, the removal efficiency of species responsible for scaling and fouling was enhanced by increasing the applied current density/voltage and contact times (30–60 s) in the EC chamber. High removal efficiencies of species potentially responsible for scale formation in reverse osmosis units such as calcium (100%), magnesium (87.9%), strontium (99.3%), barium (100%) and silicates (98.3%) were achieved. Boron was more difficult to eliminate (13.3%) and this was postulated to be due to the elevated solution pH. Similarly, fluoride removal from solution (44%) was also inhibited by the presence of hydroxide ions in the pH range 9–10. Analysis of produced flocs suggested the dominant presence of relatively amorphous boehmite (AlOOH), albeit the formation of Al(OH)3 was not ruled out as the drying process employed may have converted aluminium hydroxide to aluminium oxyhydroxide species. Evidence for adsorption of contaminants on floc surface sites was determined from FTIR studies. The quantity of aluminium released during the electrocoagulation process was higher than the Faradaic amount which suggested that the high salt concentrations in the coal seam water had chemically reacted with the aluminium electrodes.

Effects of a multiple health behavior change intervention for colorectal cancer survivors on psychosocial outcomes and quality of life: A randomized controlled trial

Background Multiple health behavior change can ameliorate adverse effects of cancer. Purpose The purpose of this study was to determine the effects of a multiple health behavior change intervention (CanChange) for colorectal cancer survivors on psychosocial outcomes and quality of life. Methods A total of 410 colorectal cancer survivors were randomized to a 6-month telephone-based health coaching intervention (11 sessions using acceptance and commitment therapy strategies focusing on physical activity, weight management, diet, alcohol, and smoking) or usual care. Posttraumatic growth, spirituality, acceptance, mindfulness, distress, and quality of life were assessed at baseline, 6 and 12 months. Results Significant intervention effects were observed for posttraumatic growth at 6 (7.5, p < 0.001) and 12 months (4.1, p = 0.033), spirituality at 6 months (1.8, p = 0.011), acceptance at 6 months (0.2, p = 0.005), and quality of life at 6 (0.8, p = 0.049) and 12 months (0.9, p = 0.037). Conclusions The intervention improved psychosocial outcomes and quality of life (physical well-being) at 6 months with most effects still present at 12 months. (Trial Registration Number: ACTRN12608000399392).

Health-related quality of life of individuals with transfemoral amputation fitted with the Transcutaneous Bone Anchoring Prosthesis following the OGAAP

Background The benefits and safety transcutaneous bone anchored prosthesis relying on a screw fixation are well reported.[1-17] However, most of the studies on press-fit implants and joint replacement technology have focused on surgical techniques.[3, 18-23] One European centre using this technique has reported on health related quality of life (HRQOL) for a group of individuals with transfemoral amputation (TFA).[3] Data from other centres are needed to assess the effectiveness of the technique in different settings. Aim This study aimed at reporting HRQOL data at baseline and up to 2-year follow-up for a group of TFAs treated by Osseointegration Group of Australia who followed the Osseointegration Group of Australia Accelerated Protocol (OGAAP), in Sydney between 08/12/2011 and 09/04/2014. Method A total of 16 TFAs (7 females and 9 males, age 51 ± 12 y, height 1.73 ± 0.12 m, weight 83 ±18 kg) participated in this study. The cause of amputation was trauma or congenital limb deficiency for 11 (69%) and 5 (31%) participants, respectively. A total of 12 (75%) participants were prosthetic users while 4(25%) were wheelchair bound prior the surgery. The HRQOL were obtained from Questionnaire for Persons with Transfemoral Amputation (Q-TFA) using the four main scales (i.e., Prosthetic use, Mobility, Problem, Global) one year before and between 6.5 and 24 months after the Stage 1 of the surgeries for the baseline and follow-up, respectively. Results The lapse of time before and after Stage 1 was -6.19±3.54 and 10.83±3.58 months respectively. The raw score and percentage of improvement are presented in Figures 1 and 2, respectively. Discussion & Conclusion The average results demonstrated an improvement in each domain, particularly in the reduction of problems and an increase in global state. Furthermore, 56%, 75%, 94% and 69% of the participants reported an improvement in Prosthetic use, Mobility, Problem, Global scales, respectively. These results were comparable to previous studies relying of screwed fixation confirming that press-fit implantation is a viable alternative for bone-anchored prostheses.[1, 7, 8]