Depression in Working Adults: Comparing the Costs and Health Outcomes of Working When Ill

Objective Working through a depressive illness can improve mental health but also carries risks and costs from reduced concentration, fatigue, and poor on-the-job performance. However, evidence-based recommendations for managing work attendance decisions, which benefit individuals and employers, are lacking. Therefore, this study has compared the costs and health outcomes of short-term absenteeism versus working while ill (“presenteeism”) amongst employed Australians reporting lifetime major depression. Methods Cohort simulation using state-transition Markov models simulated movement of a hypothetical cohort of workers, reporting lifetime major depression, between health states over one- and five-years according to probabilities derived from a quality epidemiological data source and existing clinical literature. Model outcomes were health service and employment-related costs, and quality-adjusted-life-years (QALYs), captured for absenteeism relative to presenteeism, and stratified by occupation (blue versus white-collar). Results Per employee with depression, absenteeism produced higher mean costs than presenteeism over one- and five-years ($42,573/5-years for absenteeism, $37,791/5-years for presenteeism). However, overlapping confidence intervals rendered differences non-significant. Employment-related costs (lost productive time, job turnover), and antidepressant medication and service use costs of absenteeism and presenteeism were significantly higher for white-collar workers. Health outcomes differed for absenteeism versus presenteeism amongst white-collar workers only. Conclusions Costs and health outcomes for absenteeism and presenteeism were not significantly different; service use costs excepted. Significant variation by occupation type was identified. These findings provide the first occupation-specific cost evidence which can be used by clinicians, employees, and employers to review their management of depression-related work attendance, and may suggest encouraging employees to continue working is warranted.

Modelling busway operation with mixed stopping and non-stopping buses

This thesis investigated the complexity of busway operation with stopping and non-stopping buses using field data and microscopic simulation modelling. The proposed approach made significant recommendations to transit authorities to achieve the most practicable system capacity for existing and new busways. The empirical equations developed in this research and newly introduced analysis methods will be ideal tools for transit planners to achieve optimal reliability of busways.

Novel non-linear elastic structural analysis with generalised transverse element loads using a refined finite element

In the finite element modelling of structural frames, external loads such as wind loads, dead loads and imposed loads usually act along the elements rather than at the nodes only. Conventionally, when an element is subjected to these general transverse element loads, they are usually converted to nodal forces acting at the ends of the elements by either lumping or consistent load approaches. In addition, it is especially important for an element subjected to the first- and second-order elastic behaviour, to which the steel structure is critically prone to; in particular the thin-walled steel structures, when the stocky element section may be generally critical to the inelastic behaviour. In this sense, the accurate first- and second-order elastic displacement solutions of element load effect along an element is vitally crucial, but cannot be simulated using neither numerical nodal nor consistent load methods alone, as long as no equilibrium condition is enforced in the finite element formulation, which can inevitably impair the structural safety of the steel structure particularly. It can be therefore regarded as a unique element load method to account for the element load nonlinearly. If accurate displacement solution is targeted for simulating the first- and second-order elastic behaviour on an element on the basis of sophisticated non-linear element stiffness formulation, the numerous prescribed stiffness matrices must indispensably be used for the plethora of specific transverse element loading patterns encountered. In order to circumvent this shortcoming, the present paper proposes a numerical technique to include the transverse element loading in the non-linear stiffness formulation without numerous prescribed stiffness matrices, and which is able to predict structural responses involving the effect of first-order element loads as well as the second-order coupling effect between the transverse load and axial force in the element. This paper shows that the principle of superposition can be applied to derive the generalized stiffness formulation for element load effect, so that the form of the stiffness matrix remains unchanged with respect to the specific loading patterns, but with only the magnitude of the loading (element load coefficients) being needed to be adjusted in the stiffness formulation, and subsequently the non-linear effect on element loadings can be commensurate by updating the magnitude of element load coefficients through the non-linear solution procedures. In principle, the element loading distribution is converted into a single loading magnitude at mid-span in order to provide the initial perturbation for triggering the member bowing effect due to its transverse element loads. This approach in turn sacrifices the effect of element loading distribution except at mid-span. Therefore, it can be foreseen that the load-deflection behaviour may not be as accurate as those at mid-span, but its discrepancy is still trivial as proved. This novelty allows for a very useful generalised stiffness formulation for a single higher-order element with arbitrary transverse loading patterns to be formulated. Moreover, another significance of this paper is placed on shifting the nodal response (system analysis) to both nodal and element response (sophisticated element formulation). For the conventional finite element method, such as the cubic element, all accurate solutions can be only found at node. It means no accurate and reliable structural safety can be ensured within an element, and as a result, it hinders the engineering applications. The results of the paper are verified using analytical stability function studies, as well as with numerical results reported by independent researchers on several simple frames.

Religion, spirituality, and mental health and social behaviour in young adulthood: A longitudinal study

Background The concept spirituality appears to be gaining increasing attention for its potential relationship to mental health, despite there being an absence of consensus on what spirituality is or whether it can be distinguished from religion (or religiousness) in operational terms. Spirituality is a term that is embraced within secular and non-secular contexts alike. As a consequence, spirituality as a concept encompasses forms of religiosity that are embedded in traditional religion and those that have little or no connection to traditional religious teachings. The emergence of religious/spiritual beliefs that depart from traditional religious thought represents one key feature of widespread religious change in contemporary societies. Non-traditional religious/spiritual beliefs need to be viewed within this context and thus be differentiated from traditional religious/spiritual beliefs when investigating connections between religion, spirituality, and mental health. Aims The current study seeks to compare the mental health of those whose beliefs are rooted in religious tradition with those whose beliefs deviate from traditional religious thought. The two main objectives of this study are: (1) to determine the extent to which religious background predicts endorsement of traditional and non-traditional religious/spiritual beliefs and church attendance in young adulthood, and; (2) to determine whether differential relationships exist between current religiosity, religious background, and mental health in young adulthood, and whether any observed differences are attributable to other characteristics of respondents like sociodemographic factors and health-risk behaviours. Methods Data were derived from the Mater-University of Queensland Study of Pregnancy, a longitudinal, prospective study of maternal and child health from the prenatal period to 21 years post-delivery. Religiosity was assessed among the study children in young adulthood from three items measured at the time of the 21-year follow-up. Religious background was assessed from information provided by the study mothers in earlier phases of the study. Young adult responses to items included in the Young Adult Self Report (Achenbach, 1997) were used to assess cases of anxiety/depression and externalising behaviour, and delusional ideation was assessed from their responses to the 21-item Peters et al. Delusions Inventory (PDI) (Peters & Garety, 1996). Results Belief in a spiritual or higher power other than God was found to be positively related to anxiety/depression, disturbed ideation, suspiciousness and paranormal ideation, high total PDI scores, as well as antisocial behaviour in young adulthood, regardless of gender. These associations persisted after adjustment for potential confounders. By contrast, young adults who maintain a traditional belief in God appear to be no different to those who reject this belief in regard to anxiety/depression. Belief in God was found to have no association with antisocial behaviour for males, but was observed to have a weak negative relationship with antisocial behaviour for females. This association failed to reach statistical significance however, after adjustment for other religious/spiritual and social characteristics. No associations were found between young adult belief in God and disturbed, suspicious or paranormal ideation, although a positive relationship was identified for high total PDI scores. Weekly church attendance was observed to reduce the likelihood of antisocial behaviour in young adulthood among males, but not females. Religious ideation was found to more prevalent among young adults who attend church on either a weekly or infrequent basis. No long-term effects on anxiety/depression or antisocial behaviour were evident from maternal belief in God, church attendance or religious affiliation in the young adults’ early lives. However, maternal church attendance predicted religious ideation in young adulthood. Offspring of mothers affiliated with a Pentecostal church in the prenatal period appear to have a high rate of religious ideation and high total PDI scores. Paranormal ideation in young adulthood appears to have no association with maternal religiosity in a young adult’s early life. Conclusion The findings from this study suggest that young adults who endorse non-traditional religious/spiritual beliefs are at greater risk for poorer mental health and aberrant social behaviour than those who reject these beliefs. These results suggest that a non-traditional religious/spiritual belief system involves more than mere rejection of traditional religious doctrine. This system of belief may be a marker for those who question the legitimacy of established societal norms and values, and whose thoughts, attitudes and actions reflect this position. This possibility has implications for mental health and wellbeing at both an individual and a societal level and warrants further research attention.

The role of non-thermal plasma technique in {NOx} treatment: A review

Non-thermal plasma (NTP) has been introduced over the past several years as a promising method for nitrogen oxide (NOx) removal. The intent, when using NTP, is to selectively transfer input electrical energy to the electrons, and to not expend this in heating the entire gas stream, which generates free radicals through collisions, and promotes the desired chemical changes in the exhaust gases. The generated active species react with the pollutant molecules and decompose them. This paper reviews and summarizes relevant literature regarding various aspects of the application of {NTP} technology on {NOx} removal from exhaust gases. A comprehensive description of available scientific literature on {NOx} removal using {NTP} technology is presented, including various types of NTP, e.g. dielectric barrier discharge, corona discharge and electron beam. Furthermore, the combination of {NTP} with catalyst and adsorbent for better {NOx} removal efficiency is presented in detail. The removal of {NOx} from both simulated gases and real diesel engines is also considered in this review paper. As {NTP} is a new technique and is not yet commercialized, there is a need for more studies to be performed in this field.

Empirical evaluation of the travel time reliability indicators: A case study for Brisbane corridor under recurrent and non-recurrent conditions

This research quantifies traffic congestion and travel time reliability with case study on a major arterial road in Brisbane. The focus is on the analysis of impact of incidents (e.g., road accidents) on travel time reliability. Real traffic (Bluetooth) and incident records from Coronation Drive, Brisbane are utilized for the study. The findings include significant impact of incidents on traffic congestion and travel time reliability. The knowledge gained is useful in various applications such as traveler information systems, and cost-benefit analysis of various strategies to reduce the traffic incidents and its' impacts.

Lecturing for non-law background students: Assessing the cognitive load of case and legislation-based lecturing approaches

Lecturing is a traditional method for teaching in discipline-based teaching environments and its success in legal discipline depends upon its alignment with learner backgrounds, learning objectives and the lecturing approaches utilised in the classes. In a situation where students do not have any prior knowledge of the given discipline that requires a particular lecturing approach, a mismatch in such an alignment would place learner knowledge acquisition into a challenging situation. From this perspective, this study tests the suitability of two dominant lecturing approaches—the case and the law-based lecturing approaches. It finds that a lecturer should put more emphasis on the case-based approach while lecturing to non-law background business students at the postgraduate level, provided that such an emphasis should be relative to the cognitive ability of the students and their motivation for learning law units.

Non-Therapeutic Medication Omissions: Incidence and Predictors at an Australian Hospital

Background: The inconsistent definition of non-therapeutic medication omissions, under-reporting, and a poor understanding of their associated factors hamper efforts to improve medication administration practices. Aim: To examine the incidence of non-therapeutic medication omissions among acutely ill medical and surgical adult patients; and to identify the patient-, drug- and system-related predictors of these omissions. Method: A medication chart audit of 288 acutely ill adult medical and surgical patients admitted to 4 target wards (2 surgical and 2 medical) at an Australian hospital. Patients admitted to these wards from December 2008 to November 2009, with at least one regularly prescribed medication, were eligible. The sample was stratified according to gender, season and ward. A medication chart audit identified medication omissions, and data were collected on gender, age, length of stay, comorbidities, medication history and clinical pharmacy review. Results: Of the 288 medication charts audited, 220 (75%) had one or more medication omissions. Of the 15 020 medication administration episodes, there were 1687 omissions, resulting in an omission rate per medication administration episode of 11%. Analgesics and aperients were the most frequently omitted medications, with failure to sign the medication record and patient refusal, the main reasons for omission. Female gender (p < 0.001) and the number of medication administration episodes (p < 0.001) were statistically significant predictors of non-therapeutic medication omissions. Conclusion: The high incidence of medication omissions suggests there is need for an agreed definition of medication omission and its inclusion as a reportable incident. Increasing medication reconciliation via implementation of the Medication Management Plan may also reduce the opportunity for error. J Pharm Pract Res 2011; 41: 188-91.

5,7-di-N-acetyl-acinetaminic acid: A novel non-2-ulosonic acid found in the capsule of an Acinetobacter baumannii isolate

An Acinetobacter baumannii global clone 1 (GC1) isolate was found to carry a novel capsule biosynthesis gene cluster, designated KL12. KL12 contains genes predicted to be involved in the synthesis of simple sugars, as well as ones for N-acetyl-l-fucosamine (l-FucpNAc) and N-acetyl-d-fucosamine (d-FucpNAc). It also contains a module of 10 genes, 6 of which are required for 5,7-di-N-acetyl-legionaminic acid synthesis. Analysis of the composition of the capsule revealed the presence of N-acetyl-d-galactosamine, l-FucpNAc and d-FucpNAc, confirming the role of fnlABC and fnr/gdr genes in the synthesis of l-FucpNAc and d-FucpNAc, respectively. A non-2-ulosonic acid, shown to be 5,7-diacetamido-3,5,7,9-tetradeoxy-l-glycero-l-altro-non-2-ulosonic acid, was also detected. This sugar has not previously been recovered from biological source, and was designated 5,7-di-N-acetyl-acinetaminic acid (Aci5Ac7Ac). Proteins encoded by novel genes, named aciABCD, were predicted to be involved in the conversion of 5,7-di-N-acetyl-legionaminic acid to Aci5Ac7Ac. A pathway for 5,7-di-N-acetyl-8-epilegionaminic acid biosynthesis was also proposed. In available A. baumannii genomes, genes for the synthesis of 5,7-di-N-acetyl-acinetaminic acid were only detected in two closely related capsule gene clusters, KL12 and KL13, which differ only in the wzy gene. KL12 and KL13 are carried by isolates belonging to clinically important clonal groups, GC1, GC2 and ST25. Genes for the synthesis of N-acyl derivatives of legionaminic acid were also found in 10 further A. baumannii capsule gene clusters, and three carried additional genes for production of 5,7-di-N-acetyl-8-epilegionaminic acid.

Professional indemnity insurance, performance and pre-emptive negligence: The impact of ‘non-claims’

As part of Australian licensing requirements professional valuers are required to maintain a level of professional indemnity insurance. A core feature of any insurance cover is that the insured has an obligation to notify their insurer of both actual and potential claims. An actual claim clearly will impact upon future policies and premiums paid. Notification of a potential claim, whether or not the notification crystallises into an actual claim, also can have an impact upon the insured’s claims history and premiums. The Global Financial Crisis continues to impact upon business practices and land transactions both directly and indirectly. The Australian valuation profession is not exempt from this impact. One example of this ongoing impact is reflected in a worrying practice engaged in by some financial institutions in respect of their loan portfolios. That is, even though the mortgagor is not in default, some institutions are pre-emptively issuing notices of demand regarding potential losses. Further, in some instances such demands are based only on mass appraisal valuations without specific consideration being given to the individual lot in question. The author examines the impact of this practice for the valuation profession and seeks to provide guidance for the appropriate handling of such demands.

Making trouble: Ethnographic designs on ruling relations for students and teachers in non-academic pathways

Since 2009, all Australian states require young people to be ‘earning or learning’ until age 17. Secondary schools and vocational colleges now accommodate students for whom the conventional academic pathways of the past were not designed. The paper reflects on a project designed to explore the moral orders in these institutional settings for managing such students in extended compulsory schooling. Originally designed as classroom ethnographies, the project involved observations over three to four weeks and interviews with teachers and students in five sites in towns experiencing high youth unemployment. The project aimed to support teachers to work productively in such classrooms with such students, under the assumption that teachers orchestrate classroom interactions. However, it became clear events in these classrooms were being shaped by relations and parties above and beyond the classroom, as much as by those present. Teachers and students were observed to both comply with, and push against, the layers of policy and institutional processes regulating their behaviours. This paper re-thinks the original project through the gaze and resources of institutional ethnography, to better account for the layers of accountabilities and documentation practices that impacted on both teacher and student behaviours. By tracing the extended webs of ‘ruling relations’, it shows both how teachers and students could make trouble for the institutional moral order, and then be held accountable for this trouble.

Mandatory naptimes in child care and children's nighttime sleep

Objectives To examine the relationship between mandatory naptimes in child care and children's nighttime sleep duration, both concurrently and 12 months later once in school. Methods A sample of 168 children (50-72 months; 55% males) attending licensed child care centers were observed across their morning and throughout their scheduled naptime. Mandatory naptime was determined as the period in which children were not permitted any alternative activity except lying on their bed. Teachers reported each child's napping in child care. Nighttime and total sleep duration was reported by parents at 2 time points, in child care and in the second semester of their first school year. General linear models were used to examine group differences in sleep duration between children experiencing 0 to 60 minutes and >60 minutes of mandatory naptime, adjusting for key confounders. Path analysis was conducted to test a mediation model in which mandatory naptime is associated with nighttime sleep duration through increased napping in child care. Results Children who experienced >60 minutes of mandatory naptime in child care had significantly less nighttime sleep than those with 0 to 60 minutes of mandatory naptime. This difference persisted at 12-month follow-up, once children were in school. Napping in child care mediated the relationship between mandatory naptime and duration of nighttime sleep. Conclusions Exposure to mandatory naptimes of >60 minutes in child care is associated with decreased duration of nighttime sleep that endures beyond child care attendance. Given the large number of children who attend child care, sleep practices within these settings present an important focus for child health.

Non-destructive structural integrity assessment of a decommissioned rail wagon system

This paper presents a multi-criteria based approach for nondestructive diagnostic structural integrity assessment of a decommissioned flatbed rail wagon (FBRW) used for road bridge superstructure rehabilitation and replacement applications. First, full-scale vibration and static test data sets are employed in a FE model of the FBRW to obtain the best ‘initial’ estimate of the model parameters. Second, the ‘final’ model parameters are predicted using sensitivity-based perturbation analysis without significant difficulties encountered. Consequently, the updated FBRW model is validated using the independent sets of full-scale laboratory static test data. Finally, the updated and validated FE model of the FBRW is used for structural integrity assessment of a single lane FBRW bridge subjected to the Australian bridge design traffic load.

Performance evaluation of non-thermal plasma on particulate matter, ozone and CO2 correlation for diesel exhaust emission reduction

This study is seeking to investigate the effect of non-thermal plasma technology in the abatement of particulate matter (PM) from the actual diesel exhaust. Ozone (O3) strongly promotes PM oxidation, the main product of which is carbon dioxide (CO2). PM oxidation into the less harmful product (CO2) is the main objective whiles the correlation between PM, O3 and CO2 is considered. A dielectric barrier discharge reactor has been designed with pulsed power technology to produce plasma inside the diesel exhaust. To characterise the system under varied conditions, a range of applied voltages from 11 kVPP to 21kVPP at repetition rates of 2.5, 5, 7.5 and 10 kHz, have been experimentally investigated. The results show that by increasing the applied voltage and repetition rate, higher discharge power and CO2 dissociation can be achieved. The PM removal efficiency of more than 50% has been achieved during the experiments and high concentrations of ozone on the order of a few hundreds of ppm have been observed at high discharge powers. Furthermore, O3, CO2 and PM concentrations at different plasma states have been analysed for time dependence. Based on this analysis, an inverse relationship between ozone concentration and PM removal has been found and the role of ozone in PM removal in plasma treatment of diesel exhaust has been highlighted.