Teacher leadership : interns crossing to the domain of higher professional learning with mentors?

Over the last two decades, the notion of teacher leadership has emerged as a key concept in both the teaching and leadership literature. While researchers have not reached consensus regarding a definition, there has been some agreement that teacher leadership can operate at both a formal and informal level in schools and that it includes leadership of an instructional, organisational and professional development nature (York-Barr & Duke, 2004). Teacher leadership is a construct that tends not to be applied to pre-service teachers as interns, but is more often connected with the professional role of mentors who collaborate with them as they make the transition to being a beginning teacher. We argue that teacher leadership should be recognised as a professional and career goal during this formative learning phase and that interns should be expected to overtly demonstrate signs, albeit early ones, of leadership in instruction and other professional areas of development. The aim of this paper is to explore the extent to which teacher education interns at one university in Queensland reported on activities that may be deemed to be ‘teacher leadership.’ The research approach used in this study was an examination of 145 reflective reports written in 2008 by final Bachelor of Education (primary) pre-service teachers. These reports recorded the pre-service teachers’ perceptions of their professional learning with a school-based mentor in response to four outcomes of internship that were scaffolded by their mentor or initiated by them. These outcomes formed the bases of our research questions into the professional learning of the interns and included, ‘increased knowledge and capacity to teach within the total world of work as a teacher;’ ‘to work autonomously and interdependently’; to make ‘growth in critical reflectivity’, and the ‘ability to initiate professional development with the mentoring process’. Using the approaches of the constant comparative method of Strauss and Corbin (1998) key categories of experiences emerged. These categories were then identified as belonging to main meta-category labelled as ‘teacher leadership.’ Our research findings revealed that five dimensions of teacher leadership – effective practice in schools; school curriculum work; professional development of colleagues; parent and community involvement; and contributions to the profession – were evident in the written reports by interns. Not surprisingly, the mentor/intern relationship was the main vehicle for enabling the intern to learn about teaching and leadership. The paper concludes with some key implications for developers of preservice education programmes regarding the need for teacher leadership to be part of the discourse of these programmes.

Sentencing Indigenous and Non-Indigenous Women in Western Australia’s Higher Courts

This article presents results from an exploratory study seeking to examine the role of sentencing in the continuing overrepresentation of Indigenous women in Western Australia’s prisons. Sentencing data from Western Australia’s higher courts indicate that Indigenous women were less likely than non-Indigenous women to be sentenced to a term of imprisonment when appearing before the court for comparable offending behaviour and histories.

Living walls - a way to green the built environment

Actions Towards Sustainable Outcomes Environmental Issues/Principal Impacts The increasing urbanisation of cities brings with it several detrimental consequences, such as: • Significant energy use for heating and cooling many more buildings has led to urban heat islands and increased greenhouse gas emissions. • Increased amount of hard surfaces, which not only contributes to higher temperatures in cities, but also to increased stormwater runoff. • Degraded air quality and noise. • Health and general well-being of people is frequently compromised, by inadequate indoor air quality. • Reduced urban biodiversity. Basic Strategies In many design situations, boundaries and constraints limit the application of cutting EDGe actions. In these circumstances, designers should at least consider the following: • Living walls are an emerging technology, and many Australian examples function more as internal feature walls. However,as understanding of the benefits and construction of living walls develops this technology could be part of an exterior facade that enhances a building’s thermal performance. • Living walls should be designed to function with an irrigation system using non-potable water. Cutting EDGe Strategies • Living walls can be part of a design strategy that effectively improves the thermal performance of a building, thereby contributing to lower energy use and greenhouse gas emissions. • Including living walls in the initial stages of design would provide greater flexibility to the design, especially of the facade, structural supports, mechanical ventilation and watering systems, thus lowering costs. • Designing a building with an early understanding of living walls can greatly reduce maintenance costs. • Including plant species and planting media that would be able to remove air impurities could contribute to improved indoor air quality, workplace productivity and well-being. Synergies and References • Living walls are a key research topic at the Centre for Subtropical Design, Queensland University of Technology: http://www.subtropicaldesign.bee.qut.edu.au • BEDP Environment Design Guide: DES 53: Roof and Facade Gardens • BEDP Environment Design Guide: GEN 4: Positive Development – Designing for Net Positive Impacts (see green scaffolding and green space frame walls). • Green Roofs Australia: www.greenroofs.wordpress.com • Green Roofs for Healthy Cities USA: www.greenroofs.org

Identity and disciplinarity : Multi-disciplinary student cohorts in Higher Education [Abstract]

This paper will describe a research project that examines the implications of multidisciplinary student cohorts on teaching and learning within undergraduate and postgraduate units in higher education. Whist students generally specialise in one discipline, it is also common that, at some point during their degree, they will choose to undertake subjects that are outside their specialist area. Students may choose a multidisciplinary learning experience either out of interest or because the subject is seen as complementary to their core discipline. When the lens of identity is applied to the multi-disciplinary cohorts in undergraduate and postgraduate units, it assists in identifying learning needs. The nature of disciplinarity, and the impact it has on students’ academic identity, presents challenges to both students and teachers when they engage in teaching and learning, impacting on curriculum design, assessment practices and teaching delivery strategies (Winberg, 2008). This project aims to identify the barriers that exist to effective teaching and learning in units that have multidisciplinary student cohorts. It will identify the particular needs of students in multidisciplinary student cohorts and determine a teaching and learning model that meets the needs of such cohorts. References Becher, T. & Trowler, P.R. (2001). Academic tribes and territories: Intellectual enquiry and the culture of the discipline. Buckingham, UK: Open University Press. Light, G. & Cox, R. (2001). Learning and teaching in higher education: A reflective professional. Thousand Oaks, CA: Sage. Neumann, R. (2001). Disciplinary differences and university teaching. Studies in Higher Education, 26 (2), 135-46. Neumann, R., Parry, S. & Becher, T. (2002). Teaching and Learning in their disciplinary contexts: A conceptual analysis. Studies in Higher Education, 27(4), 405-417. Taylor, P.G. (1999) Making Sense of Academic Life: Academics, Universities and Change. Buckingham, UK: Open University Press. Winberg, C. (2008). Teaching engineering/engineering teaching: interdisciplinary collaboration and the construction of academic identities. Teaching in Higher Education, 13(3), 353 - 367.

Quality assurance in higher education : for whom and of what?

Over the past two decades the quality assurance of higher education institutions has captured a growing interest as evidenced by the increasing number of national and transnational bodies engaged in this area. Yet as the first decade of the 21st century draws to a close, higher education systems and thus the regimes designed to ensure their quality are faced with significant complexity. Issues of accountability, authority and responsibility are paramount when responding to industry bodies, to globalisation and the transnational provision of higher education and to the use of market mechanisms. In this paper we raise some of the challenges for quality assurance for higher education presented by this growing complexity through the question, quality assurance in higher education, for whom and of what, highlighting our concern for a need to expand the centrality of accountability to include authority and responsibility as part of the quality assurance regimes for higher education

Higher Order Thinking through ICT: What do middle years teachers think really matters?

The middle years of schooling has emerged as an important focus in Australian education. Student disengagement and alienation, the negative effects of non-completion of the senior years of schooling and underachievement have raised concerns about the quality of education during the middle years. For many schools, reshaping the middle years has involved incorporating Information and Communication Technologies (ICT) to motivate students. However, simultaneously there is a need to ensure that programs are academically rigorous. There is little doubt that there are potential benefits to integrating ICT into programs for middle years’ students. However, little is known about how middle years’ teachers perceive higher order thinking, which is a component of academic rigour. This paper investigates the question of What are teachers’ perceptions of higher order thinking in an ICT environment? The study is underpinned by socio-cultural theory which is based on the belief that learning occurs through social interaction and that individuals are shaped by the social and cultural tools and instruments they engage with. This investigation used a collective case study design. Two methods were used for data collection. These methods are semi-structured interviews with individual teachers and a class and a focus group discussion with teachers. Findings indicate that teachers hold various perceptions of higher order thinking that lead to productive approaches to integrating ICT in middle years’ classrooms. The paper highlights that there may be a continuum of perceptions of higher order thinking with ICT. This continuum may inform professional developers who are guiding and supporting teachers to integrate ICT into middle years’ classrooms.

Wellness as higher education curriculum: A comprehensive framework for health education and promotion

A number of studies in relation to the place, impact and purpose of Wellness curricula provide insight into the perceived benefits of Wellness education in university environments. Of particular note is the recommendation by many authors that curriculum design fosters personal experiences, reflective practice and active self-managed learning approaches in order to legitimise (give permission for) the adoption of wellness as a personal lifestyle approach in the frenetic pace of student life. From a broader educational perspective, Wellness education provides opportunities for students to engage in learning self regulation skills both within and beyond the context of the Wellness construct.To realise the suggested potential of Wellness education in higher learning, it is necessary that curricula overlay the principles from the domains of both self-regulation and Wellness, to highlight authentic learning as a means to lifelong approaches. Currently, however, systematic development and empirical examination of the Wellness construct have received limited academic investigation. Despite having a multitude of intended purposes from the educative to the therapy oriented goals of the original authors, most wellness models appear to be limited to the “what” of Wellness. Investigations of the “how” and “why” aspects of Wellness may serve to enhance currently existing models by incorporating behaviour modification and learning approaches in order to create more comprehensive frameworks for health education and promotion.It is also important to note that none of the current Wellness models actually address the educative framework necessary for an individual to learn and thus become aware or understand and make choices about their own Wellness.The literature reviewed within this paper would suggest that learner success is optimised by giving learners authentic opportunities to develop and practice self regulation strategies. Such opportunities include learning experiences that: provide options for self determined outcomes; require skills development; recognise principles of successful learning as outlined by the APA; and are scaffolded according to learner needs rather than in generic ways. Thus, configuring a learner centred curriculum in Wellness Education would potentially benefit from overlaying principles from the domains of both SRL and Wellness to highlight authentic learning as a means to lifelong approaches, triggered by undergraduate experiences.Student perceptions are a rich and significant data base for the measurement of their experiences, activities, practices and behaviours. Wellness undergraduate education, such as the “Fitness, Health and Wellness” unit offered by Queensland University of Technology, offers a context in which to confirm possibilities suggested by the literature reviewed in this paper in a practical, Australian context.

ERP systems in the higher education sector : a descriptive study

In response to a range of contextual drivers, the worldwide adoption of ERP Systems in Higher Education Institutions (HEIs) has increased substantially over the past decade. Though this demand continues to grow, with HEIs now a main target market for ERP vendors, little has been published on the topic. This paper reports a sub-study of a larger research effort that aims to contribute to understanding the phenomenon of ERP adoption and evaluation in HEIs in the Australasian region. It presents a descriptive case study conducted at Queensland University of Technology (QUT) in Australia, with emphasis on challenges with ERP adoption. The case study provides rich contextual details about ERP system selection, customisation, integration and evaluation, and insights into the role of consultants in the HE sector. Through this analysis, the paper (a) provides evidence of the dearth of ERP literature pertaining to the HE sector; (b) yields insights into differentiating factors in the HE sector that warrants specific research attention, and (c) offers evidence of how key ERP decisions such as systems selection, customisation, integration, evaluation, and consultant engagement are influenced by the specificities of the HE sector.

Extending the IS-Impact Model into the higher education sector

The study addresses known limitations of what may be the most important dependent variable in Information Systems (IS) research; IS-Success or IS-Impact. The study is expected to force a deeper understanding of the broad notions of IS success and impact. The aims of the research are to: (1) enhance the robustness and minimize limitations of the IS-Impact model, and (2) introduce and operationalise a more rigorously validated IS Impact measurement model to Universities, as a reliable model for evaluating different Administrative Systems. In extending and further generalizing the IS-Impact model, the study will address contemporary validation issues.

Identifying critical success factors of ERP Systems at the higher education sector

In response to a range of contextual drivers, the worldwide adoption of ERP Systems in Higher Education Institutions (HEIs) has increased substantially over the past decade. Though the difficulties and high failure rate in implementing ERP systems at university environments have been cited in the literature, research on critical success factors (CSFs) for ERP implementations in this context is rare and fragmented. This paper is part of a larger research effort that aims to contribute to understanding the phenomenon of ERP implementations and evaluations in HEIs in the Australasian region; it identifies, previously reported, critical success factors (CSFs) in relation to ERP system implementations and discusses the importance of these factors.

Biometric template security using higher order spectra

A method of improving the security of biometric templates which satisfies desirable properties such as (a) irreversibility of the template, (b) revocability and assignment of a new template to the same biometric input, (c) matching in the secure transformed domain is presented. It makes use of an iterative procedure based on the bispectrum that serves as an irreversible transformation for biometric features because signal phase is discarded each iteration. Unlike the usual hash function, this transformation preserves closeness in the transformed domain for similar biometric inputs. A number of such templates can be generated from the same input. These properties are illustrated using synthetic data and applied to images from the FRGC 3D database with Gabor features. Verification can be successfully performed using these secure templates with an EER of 5.85%

A study into the permeability and compressibility of Australian bagasse pulp

This is an experimental study into the permeability and compressibility properties of bagasse pulp pads. Three experimental rigs were custom-built for this project. The experimental work is complemented by modelling work. Both the steady-state and dynamic behaviour of pulp pads are evaluated in the experimental and modelling components of this project. Bagasse, the fibrous residue that remains after sugar is extracted from sugarcane, is normally burnt in Australia to generate steam and electricity for the sugar factory. A study into bagasse pulp was motivated by the possibility of making highly value-added pulp products from bagasse for the financial benefit of sugarcane millers and growers. The bagasse pulp and paper industry is a multibillion dollar industry (1). Bagasse pulp could replace eucalypt pulp which is more widely used in the local production of paper products. An opportunity exists for replacing the large quantity of mainly generic paper products imported to Australia. This includes 949,000 tonnes of generic photocopier papers (2). The use of bagasse pulp for paper manufacture is the main application area of interest for this study. Bagasse contains a large quantity of short parenchyma cells called ‘pith’. Around 30% of the shortest fibres are removed from bagasse prior to pulping. Despite the ‘depithing’ operations in conventional bagasse pulp mills, a large amount of pith remains in the pulp. Amongst Australian paper producers there is a perception that the high quantity of short fibres in bagasse pulp leads to poor filtration behaviour at the wet-end of a paper machine. Bagasse pulp’s poor filtration behaviour reduces paper production rates and consequently revenue when compared to paper production using locally made eucalypt pulp. Pulp filtration can be characterised by two interacting factors; permeability and compressibility. Surprisingly, there has previously been very little rigorous investigation into neither bagasse pulp permeability nor compressibility. Only freeness testing of bagasse pulp has been published in the open literature. As a result, this study has focussed on a detailed investigation of the filtration properties of bagasse pulp pads. As part of this investigation, this study investigated three options for improving the permeability and compressibility properties of Australian bagasse pulp pads. Two options for further pre-treating depithed bagasse prior to pulping were considered. Firstly, bagasse was fractionated based on size. Two bagasse fractions were produced, ‘coarse’ and ‘medium’ bagasse fractions. Secondly, bagasse was collected after being processed on two types of juice extraction technology, i.e. from a sugar mill and from a sugar diffuser. Finally one method of post-treating the bagasse pulp was investigated. The effects of chemical additives, which are known to improve freeness, were also assessed for their effect on pulp pad permeability and compressibility. Pre-treated Australian bagasse pulp samples were compared with several benchmark pulp samples. A sample of commonly used kraft Eucalyptus globulus pulp was obtained. A sample of depithed Argentinean bagasse, which is used for commercial paper production, was also obtained. A sample of Australian bagasse which was depithed as per typical factory operations was also produced for benchmarking purposes. The steady-state pulp pad permeability and compressibility parameters were determined experimentally using two purpose-built experimental rigs. In reality, steady-state conditions do not exist on a paper machine. The permeability changes as the sheet compresses over time. Hence, a dynamic model was developed which uses the experimentally determined steady-state permeability and compressibility parameters as inputs. The filtration model was developed with a view to designing pulp processing equipment that is suitable specifically for bagasse pulp. The predicted results of the dynamic model were compared to experimental data. The effectiveness of a polymeric and microparticle chemical additives for improving the retention of short fibres and increasing the drainage rate of a bagasse pulp slurry was determined in a third purpose-built rig; a modified Dynamic Drainage Jar (DDJ). These chemical additives were then used in the making of a pulp pad, and their effect on the steady-state and dynamic permeability and compressibility of bagasse pulp pads was determined. The most important finding from this investigation was that Australian bagasse pulp was produced with higher permeability than eucalypt pulp, despite a higher overall content of short fibres. It is thought this research outcome could enable Australian paper producers to switch from eucalypt pulp to bagasse pulp without sacrificing paper machine productivity. It is thought that two factors contributed to the high permeability of the bagasse pulp pad. Firstly, thicker cell walls of the bagasse pulp fibres resulted in high fibre stiffness. Secondly, the bagasse pulp had a large proportion of fibres longer than 1.3 mm. These attributes helped to reinforce the pulp pad matrix. The steady-state permeability and compressibility parameters for the eucalypt pulp were consistent with those found by previous workers. It was also found that Australian pulp derived from the ‘coarse’ bagasse fraction had higher steady-state permeability than the ‘medium’ fraction. However, there was no difference between bagasse pulp originating from a diffuser or a mill. The bagasse pre-treatment options investigated in this study were not found to affect the steady-state compressibility parameters of a pulp pad. The dynamic filtration model was found to give predictions that were in good agreement with experimental data for pads made from samples of pretreated bagasse pulp, provided at least some pith was removed prior to pulping. Applying vacuum to a pulp slurry in the modified DDJ dramatically reduced the drainage time. At any level of vacuum, bagasse pulp benefitted from chemical additives as quantified by reduced drainage time and increased retention of short fibres. Using the modified DDJ, it was observed that under specific conditions, a benchmark depithed bagasse pulp drained more rapidly than the ‘coarse’ bagasse pulp. In steady-state permeability and compressibility experiments, the addition of chemical additives improved the pad permeability and compressibility of a benchmark bagasse pulp with a high quantity of short fibres. Importantly, this effect was not observed for the ‘coarse’ bagasse pulp. However, dynamic filtration experiments showed that there was also a small observable improvement in filtration for the ‘medium’ bagasse pulp. The mechanism of bagasse pulp pad consolidation appears to be by fibre realignment. Chemical additives assist to lubricate the consolidation process. This study was complemented by pulp physical and chemical property testing and a microscopy study. In addition to its high pulp pad permeability, ‘coarse’ bagasse pulp often (but not always) had superior physical properties than a benchmark depithed bagasse pulp.

Cardiac state diagnosis using higher order spectra of heart rate variability

Heart rate variability (HRV) refers to the regulation of the sinoatrial node, the natural pacemaker of the heart, by the sympathetic and parasympathetic branches of the autonomic nervous system. Heart rate variability analysis is an important tool to observe the heart's ability to respond to normal regulatory impulses that affect its rhythm. A computer-based intelligent system for analysis of cardiac states is very useful in diagnostics and disease management. Like many bio-signals, HRV signals are nonlinear in nature. Higher order spectral analysis (HOS) is known to be a good tool for the analysis of nonlinear systems and provides good noise immunity. In this work, we studied the HOS of the HRV signals of normal heartbeat and seven classes of arrhythmia. We present some general characteristics for each of these classes of HRV signals in the bispectrum and bicoherence plots. We also extracted features from the HOS and performed an analysis of variance (ANOVA) test. The results are very promising for cardiac arrhythmia classification with a number of features yielding a p-value < 0.02 in the ANOVA test.

Higher accumulation of polybrominated diphenyl ethers in infants than in adults

Pooled serum samples collected from 8132 residents in 2002/03 and 2004/05 were analyzed to assess human polybrominated diphenyl ether (PBDE) concentrations from specified strata of the Australian population. The strata were defined by age (0−4 years, 5−15 years, < 16 years, 16−30 years, 31−45 years, 46−60 years, and >60 years); region; and gender. For both time periods, infants and older children had substantially higher PBDE concentrations than adults. For samples collected in 2004/05, the mean ± standard deviation ΣPBDE (sum of the homologue groups for the mono-, di-, tri-, tetra-, penta-, hexa-, hepta-, octa-, nona-, and deca-BDEs) concentrations for 0−4 and 5−15 years were 73 ± 7 and 29 ± 7 ng g−1 lipid, respectively, while for all adults >16 years, the mean concentration was lower at 18 ± 5 ng g−1 lipid. A similar trend was observed for the samples collected in 2002/03, with the mean ΣPBDE concentration for children <16 years being 28 ± 8 ng g−1 lipid and for the adults >16 years, 15 ± 5 ng g−1 lipid. No regional or gender specific differences were observed. Measured data were compared with a model that we developed to incorporate the primary known exposure pathways (food, air, dust, breast milk) and clearance (half-life) data. The model was used to predict PBDE concentration trends and indicated that the elevated concentrations in infants were primarily due to maternal transfer and breast milk consumption with inhalation and ingestion of dust making a comparatively lower contribution.