Chlamydial infection and spatial ascension of the female genital tract : a novel hybrid cellular automata and continuum mathematical model

Sexually transmitted chlamydial infection initially establishes in the endocervix in females, but if the infection ascends the genital tract, significant disease, including infertility, can result. Many of the mechanisms associated with chlamydial infection kinetics and disease ascension are unknown. We attempt to elucidate some of these processes by developing a novel mathematical model, using a cellular automata–partial differential equation model. We matched our model outputs to experimental data of chlamydial infection of the guinea-pig cervix and carried out sensitivity analyses to determine the relative influence of model parameters. We found that the rate of recruitment and action of innate immune cells to clear extracellular chlamydial particles and the rate of passive movement of chlamydial particles are the dominant factors in determining the early course of infection, magnitude of the peak chlamydial time course and the time of the peak. The rate of passive movement was found to be the most important factor in determining whether infection would ascend to the upper genital tract. This study highlights the importance of early innate immunity in the control of chlamydial infection and the significance of motility-diffusive properties and the adaptive immune response in the magnitude of infection and in its ascension.

Cyclic strain disrupts endothelial network formation on Matrigel

Most forms of tissue healing depend critically on revascularisation. In soft tissues and in vitro, mechanical stimuli have been shown to promote vessel-forming activity. However, in bone defects, increased interfragmentary motion impairs vascular regeneration. Because these effects seem contradictory, we aimed to determine whether a range of mechanical stimuli exists in which angiogenesis is favoured. A series of cyclic strain magnitudes were applied to a Matrigel-based “tube formation” assay and the total lengths of networks formed by human microvascular endothelial cells measured at 24 h. Network lengths were reduced at all strain levels, compared to unstretched controls. However, the levels of pro-angiogenic matrix metalloproteases-2 and -9 in the corresponding conditioned media were unchanged by strain, and vascular endothelial growth factor was uniformly elevated in stretched conditions. By repeating the assay with the addition of conditioned media from mesenchymal stem cells cultivated in similar conditions, paracrine stimuli were shown to increase network lengths, but not to alter the negative effect of cyclic stretching. Together, these results demonstrate that directly applied periodic strains can inhibit endothelial organisation in vitro, and suggest that this may be due to physical disruption rather than biochemical modulation. Most importantly, the results indicate that the straining of endothelial cells and their assembly into vascular-like structures must be studied simultaneously to adequately characterise the mechanical influence on vessel formation.

Learning journals as a counseling strategy

The effects of counseling have been subject to extensive examination including the meta-analyses of Lipsey and Wilson (1993) and Matt and Navarro (1997). The results of these analyses demonstrated the positive effects of counseling interventions but do not indicate how, when, and why these benefits eventuated (Paul, 1967; Shadish & Sweeney, 1991), nor do they consider mediating variables. Much of the research in this area has involved the measurement of quantitative behavioral outcomes and short-term behavioral change (Steenbarger & Smith, 1996). However, there has been a recent move toward more qualitative, process-orientated research (Polkingthorne, 1994). This move addresses the previous methodological myopia but neglects the place of learning in the counseling process. It is suggested that if learning is viewed as underpinning all counseling, then clients should be able to transfer what they have learned from the counseling experience to problematical situations without the need for further counseling.

Modelling the effects of bone fragment contact in fracture healing

The fracture healing process is modulated by the mechanical environment created by imposed loads and motion between the bone fragments. Contact between the fragments obviously results in a significantly different stress and strain environment to a uniform fracture gap containing only soft tissue (e.g. haematoma). The assumption of the latter in existing computational models of the healing process will hence exaggerate the inter-fragmentary strain in many clinically-relevant cases. To address this issue, we introduce the concept of a contact zone that represents a variable degree of contact between cortices by the relative proportions of bone and soft tissue present. This is introduced as an initial condition in a two-dimensional iterative finite element model of a healing tibial fracture, in which material properties are defined by the volume fractions of each tissue present. The algorithm governing the formation of cartilage and bone in the fracture callus uses fuzzy logic rules based on strain energy density resulting from axial compression. The model predicts that increasing the degree of initial bone contact reduces the amount of callus formed (periosteal callus thickness 3.1mm without contact, down to 0.5mm with 10% bone in contact zone). This is consistent with the greater effective stiffness in the contact zone and hence, a smaller inter-fragmentary strain. These results demonstrate that the contact zone strategy reasonably simulates the differences in the healing sequence resulting from the closeness of reduction.

EMI issues in high power and high level diode-clamped converters

Planar busbar is a good candidate to reduce interconnection inductance in high power inverters compared with cables. However, power switching components with fast switching combined with hard switched-converters produce high di/dt during turn off time and busbar stray inductance then becomes an important issue which creates overvoltage. It is necessary to keep the busbar stray inductance as low as possible to decrease overvoltage and Electromagnetic Interference (EMI) noise. In this paper, the effect of different transient current loops on busbar physical structure of the high-voltage high-level diode-clamped converters will be highlighted. Design considerations of proper planar busbar will also be presented to optimise the overall design of diode-clamped converters.

Achieving effective supervision

Supervision probably does have benefits both for the maintenance and improvement of clinical skills and for job satisfaction, but the data are very thin and almost non-existent in the area of alcohol and other drugs ser vices. Because of the potential complexity of objectives and roles in super vision, a structured agreement appears to be an important part of the effective supervision relationship. Because sessions can degenerate easily into unstructured socialization, agendas and session objectives may also be important. While a working alliance based on mutual respect and trust is an essential base for the supervision relationship, procedures for direct observation of clinical skills, demonstration of new procedures and skills practice with detailed feedback appear critical to super vision’s impact on practice. To ensure effective supervision, there needs not only to be a minimum of personnel and resources, but also a compatibility with the values and procedures of management and staff, access to supervision training and consultation and sufficient incentives to ensure it continues.

The foraging behaviour of the Black rat (Rattus rattus) within Australian macadamia orchards

The black rat (Rattus rattus) has been shown to be the primary species responsible for causing significant crop losses within the Australian macadamia industry. This species success within macadamia orchards is directly related to the flexibility expressed in its foraging behaviour. In this paper a conceptual foraging model is presented which proposes that the utilisation of resources by rodents within various components of the system is related not only to their relative abundance, but also to predator avoidance behaviour. Nut removal from high predation risk habitats during periods of low resource abundance in low risk compartments of the system is considered an essential behaviour that allows high rodent densities to be maintained throughout the year.

Prediction of adherence and control in diabetes

This study aims to predict adherence to diabetic treatment regimens and sustained diabetic control. During two clinic visits that were 2 months apart, 63 adult outpatients completed measures of diabetic history, current treatment, diabetic control, adherence, and self-efficacy about adherence to treatment. Results showed that self-efficacy was a significant predictor of later adherence to diabetes treatment even after past levels of adherence were taken into account. Posttest levels of adherence in turn were significantly associated with posttest %HbA1c after control for illness severity. A stepwise multiple regression to predict %HbAlc at post entered pretest measures of diabetic control, treatment type, and self-efficacy, which together predicted 50% of the variance. Results are related to self-efficacy theory and implications for practice are discussed.

Simulation and development of a mock circulation loop with variable compliance

Heart disease is attributed as the highest cause of death in the world. Although this could be alleviated by heart transplantation, there is a chronic shortage of donor hearts and so mechanical solutions are being considered. Currently, many Ventricular Assist Devices (VADs) are being developed worldwide in an effort to increase life expectancy and quality of life for end stage heart failure patients. Current pre-clinical testing methods for VADs involve laboratory testing using Mock Circulation Loops (MCLs), and in vivo testing in animal models. The research and development of highly accurate MCLs is vital to the continuous improvement of VAD performance. The first objective of this study was to develop and validate a mathematical model of a MCL. This model could then be used in the design and construction of a variable compliance chamber to improve the performance of an existing MCL as well as form the basis for a new miniaturised MCL. An extensive review of literature was carried out on MCLs and mathematical modelling of their function. A mathematical model of a MCL was then created in the MATLAB/SIMULINK environment. This model included variable features such as resistance, fluid inertia and volumes (resulting from the pipe lengths and diameters); compliance of Windkessel chambers, atria and ventricles; density of both fluid and compressed air applied to the system; gravitational effects on vertical columns of fluid; and accurately modelled actuators controlling the ventricle contraction. This model was then validated using the physical properties and pressure and flow traces produced from a previously developed MCL. A variable compliance chamber was designed to reproduce parameters determined by the mathematical model. The function of the variability was achieved by controlling the transmural pressure across a diaphragm to alter the compliance of the system. An initial prototype was tested in a previously developed MCL, and a variable level of arterial compliance was successfully produced; however, the complete range of compliance values required for accurate physiological representation was not able to be produced with this initial design. The mathematical model was then used to design a smaller physical mock circulation loop, with the tubing sizes adjusted to produce accurate pressure and flow traces whilst having an appropriate frequency response characteristic. The development of the mathematical model greatly assisted the general design of an in vitro cardiovascular device test rig, while the variable compliance chamber allowed simple and real-time manipulation of MCL compliance to allow accurate transition between a variety of physiological conditions. The newly developed MCL produced an accurate design of a mechanical representation of the human circulatory system for in vitro cardiovascular device testing and education purposes. The continued improvement of VAD test rigs is essential if VAD design is to improve, and hence improve quality of life and life expectancy for heart failure patients.

Supervision practice for allied mental health professionals within a large mental health workforce : exploring the phenomenon

This paper reports on an exploration of the concept of 'supervision' as applied to allied health professionals within a large mental health service in one Australian State. A two-part methodology was used, with focus group interviews conducted with allied health professionals, and semi-structured telephone interviews with service managers. Fifty-eight allied health professionals participated in a series of seven focus groups. Semi-structured interviews were conducted with the Directors or Managers of mental health services in all 21 regions in the state. Allied health professionals and service managers both considered supervision to be an important mechanism for ensuring staff competence and best practice outcomes for consumers and carers. There was strong endorsement of the need for clarification and articulation of supervision policies within the organization, and the provision of appropriate resourcing to enable supervision to occur. Current practice in supervision was seen as ad hoc and of variable standard; the need for training in supervision was seen as critical. The supervision needs of newly graduated allied health professionals and those working in rural and regional areas were also seen as important. The need for a flexible and accessible model of supervision was clearly demonstrated.

Clinical supervision in four mental health professions : a review of the evidence

Examines a range of theoretical issues and the empirical evidence relating to clinical supervision in 4 mental health professions: clinical psychology, occupational therapy, social work, and speech pathology. There is widespread acceptance of the value of supervision among practitioners and a large quantity of literature on the topic, but there is very little empirical evidence in this area. To date, there is insufficient evidence to demonstrate which styles of supervision are most beneficial for particular types of staff, in terms of their level of experience or learning style. The data suggest that directive forms of supervision, rather than unstructured approaches, are preferred by relatively inexperienced practitioners, and that experienced clinicians also value direct supervision methods when learning new skills or dealing with complex or crisis situations. The available evidence suggests that supervisors typically receive little training in supervision methods. However, there is little information to guide us as to the most effective ways of training supervisors. While acknowledging the urgent need for research, this paper concludes that supervision is likely to form a valuable component of professional development for mental health professionals.

Use of Probe Vehicles to Increase Traffic Estimation Accuracy in Brisbane

Traffic congestion is an increasing problem with high costs in financial, social and personal terms. These costs include psychological and physiological stress, aggressivity and fatigue caused by lengthy delays, and increased likelihood of road crashes. Reliable and accurate traffic information is essential for the development of traffic control and management strategies. Traffic information is mostly gathered from in-road vehicle detectors such as induction loops. Traffic Message Chanel (TMC) service is popular service which wirelessly send traffic information to drivers. Traffic probes have been used in many cities to increase traffic information accuracy. A simulation to estimate the number of probe vehicles required to increase the accuracy of traffic information in Brisbane is proposed. A meso level traffic simulator has been developed to facilitate the identification of the optimal number of probe vehicles required to achieve an acceptable level of traffic reporting accuracy. Our approach to determine the optimal number of probe vehicles required to meet quality of service requirements, is to simulate runs with varying numbers of traffic probes. The simulated traffic represents Brisbane’s typical morning traffic. The road maps used in simulation are Brisbane’s TMC maps complete with speed limits and traffic lights. Experimental results show that that the optimal number of probe vehicles required for providing a useful supplement to TMC (induction loop) data lies between 0.5% and 2.5% of vehicles on the road. With less probes than 0.25%, little additional information is provided, while for more probes than 5%, there is only a negligible affect on accuracy for increasingly many probes on the road. Our findings are consistent with on-going research work on traffic probes, and show the effectiveness of using probe vehicles to supplement induction loops for accurate and timely traffic information.

Prediction of outcome with group cognitive therapy for depression

Tested a social–cognitive model of depressive episodes and their treatment within a predictive study of treatment response. 42 clinically depressed volunteers (aged 22–60 yrs) were given self-efficacy (SE) questionnaires and other measures before and after treatment with cognitive therapy. Results support the idea that SE and skills regarding control of negative cognition mediates a sustained response to cognitive treatment for depression. Not only did mood-control variables correlate highly with concurrent changes in depression scores during treatment, but the posttreatment SE measure discriminated Ss who relapsed over the next 12 mo.

Intensive cognitive-behaviour therapy for depression : preliminary findings with four country residents

Describes a brief intensive program of cognitive therapy for depression that was designed for 4 adult residents of country towns in Australia, who resided some distance from treatment centers. Ss were assessed prior to treatment, at posttreatment, and at 4-wk, 8-wk, and 20-mo follow-ups. Treatments took place over 3 consecutive days for a total period of 15 hrs. Effects were highly consistent with the impact of group treatments delivered on a more traditional schedule. If confirmed in a controlled group study, these results suggest that cognitive therapy may be applied more economically and more widely than was previously realized.

EMG biofeedback in the treatment of tinnitus : an experimental evaluation

26 tinnitus patients received either electromyogram (EMG) biofeedback with counterdemand instructions, EMG biofeedback with neutral demand instructions, or no treatment. Assessment was conducted on self-report measures of the distress associated with tinnitus, the loudness, annoyance and awareness of tinnitus, sleep-onset difficulties, depression, and anxiety. Audiological assessment of tinnitus was also conducted and EMG levels were measured (the latter only in the 2 treatment groups). No significant treatment effects were found on any of the measures. There was a significant decrease in the ratings of tinnitus awareness over the assessment occasions, but the degree of change was equivalent for treated and untreated groups. Results do not support the assertion that EMG biofeedback is an effective treatment for tinnitus.