Experimentally induced diesel engine injector faults and some preliminary acoustic emission signal observations

Diesel engine fuel injector faults can lead to reduced power, increased fuel consumption and greater exhaust emission levels and if left unchecked, can eventually lead to premature engine failure. This paper provides an overview of the Diesel, or compression ignition combustion process, and of the two basic fuel injector nozzle designs used in Diesel engines, namely, the pintle-type and hole-type nozzles. Also described are some common faults associated with these two types of fuel injector nozzles and the techniques previously used to experimentally simulate these faults. This paper also presents a recent experimental campaign undertaken using two different diesel engines whereby various fuel injector nozzle faults were induced into the engines. The first series of tests was undertaken using a turbo-charged 5.9 litre; Cummins Diesel engine whist the second series of tests was undertaken using a naturally aspirated 4 cylinder, 2.216 litre, Perkins Diesel engine. Data corresponding to different injector fault conditions was captured using in-cylinder pressure, and acoustic emission transducers along with both crank-angle encoder and top-dead centre reference signals. Using averaged in-cylinder pressure signals, it was possible to qualify the severity of the faults whilst averaged acoustic emission signals were in turn, used as the basis for wavelets decomposition. Initial observations from this signal decomposition are also presented and discussed.

A study on acoustic emission signal propagation of a small size multi-cylinder diesel engine

Acoustic emission has been found effective in offering earlier fault detection and improving identification capabilities of faults. However, the sensors are inherently uncalibrated. This paper presents a source to sensor paths calibration technique which can lead to diagnosis of faults in a small size multi-cylinder diesel engine. Preliminary analysis of the acoustic emission (AE) signals is outlined, including time domain, time-frequency domain, and the root mean square (RMS) energy. The results reveal how the RMS energy of a source propagates to the adjacent sensors. The findings lead to allocate the source and estimate its inferences to the adjacent sensor, and finally help to diagnose the small size diesel engines by minimising the crosstalk from multiple cylinders.

Beyond MOF constraints : multiple constraint set metamodelling for lifecycle management

The management of models over time in many domains requires different constraints to apply to some parts of the model as it evolves. Using EMF and its meta-language Ecore, the development of model management code and tools usually relies on the meta- model having some constraints, such as attribute and reference cardinalities and changeability, set in the least constrained way that any model user will require. Stronger versions of these constraints can then be enforced in code, or by attaching additional constraint expressions, and their evaluations engines, to the generated model code. We propose a mechanism that allows for variations to the constraining meta-attributes of metamodels, to allow enforcement of different constraints at different lifecycle stages of a model. We then discuss the implementation choices within EMF to support the validation of a state-specific metamodel on model graphs when changing states, as well as the enforcement of state-specific constraints when executing model change operations.

Condition monitoring and diagnosis of injector faults in a diesel engine using in-cylinder pressure and acoustic emission techniques

Failing injectors are one of the most common faults in diesel engines. The severity of these faults could have serious effects on diesel engine operations such as engine misfire, knocking, insufficient power output or even cause a complete engine breakdown. It is thus essential to prevent such faults from occurring by monitoring the condition of these injectors. In this paper, the authors present the results of an experimental investigation on identifying the signal characteristics of a simulated incipient injector fault in a diesel engine using both in-cylinder pressure and acoustic emission (AE) techniques. A time waveform event driven synchronous averaging technique was used to minimize or eliminate the effect of engine speed variation and amplitude fluctuation. It was found that AE is an effective method to detect the simulated injector fault in both time (crank angle) and frequency (order) domains. It was also shown that the time domain in-cylinder pressure signal is a poor indicator for condition monitoring and diagnosis of the simulated injector fault due to the small effect of the simulated fault on the engine combustion process. Nevertheless, good correlations between the simulated injector fault and the lower order components of the enveloped in-cylinder pressure spectrum were found at various engine loading conditions.

Classifying the user intent of web queries using k-means clustering

Purpose: Web search engines are frequently used by people to locate information on the Internet. However, not all queries have an informational goal. Instead of information, some people may be looking for specific web sites or may wish to conduct transactions with web services. This paper aims to focus on automatically classifying the different user intents behind web queries. Design/methodology/approach: For the research reported in this paper, 130,000 web search engine queries are categorized as informational, navigational, or transactional using a k-means clustering approach based on a variety of query traits. Findings: The research findings show that more than 75 percent of web queries (clustered into eight classifications) are informational in nature, with about 12 percent each for navigational and transactional. Results also show that web queries fall into eight clusters, six primarily informational, and one each of primarily transactional and navigational. Research limitations/implications: This study provides an important contribution to web search literature because it provides information about the goals of searchers and a method for automatically classifying the intents of the user queries. Automatic classification of user intent can lead to improved web search engines by tailoring results to specific user needs. Practical implications: The paper discusses how web search engines can use automatically classified user queries to provide more targeted and relevant results in web searching by implementing a real time classification method as presented in this research. Originality/value: This research investigates a new application of a method for automatically classifying the intent of user queries. There has been limited research to date on automatically classifying the user intent of web queries, even though the pay-off for web search engines can be quite beneficial. © Emerald Group Publishing Limited.

Investigating the performance of automatic new topic identification across multiple datasets 1

Recent studies on automatic new topic identification in Web search engine user sessions demonstrated that neural networks are successful in automatic new topic identification. However most of this work applied their new topic identification algorithms on data logs from a single search engine. In this study, we investigate whether the application of neural networks for automatic new topic identification are more successful on some search engines than others. Sample data logs from the Norwegian search engine FAST (currently owned by Overture) and Excite are used in this study. Findings of this study suggest that query logs with more topic shifts tend to provide more successful results on shift-based performance measures, whereas logs with more topic continuations tend to provide better results on continuation-based performance measures.

Searching for salvation: An analysis of US religious searching on the World Wide Web

The goals of this research were to answer three questions. How predominant is religious searching online? How do people interact with Web search engines when searching for religious information? How effective are these interactions in locating relevant information? Specifically, referring to a US demographic, we analyzed five data sets from Web search engine, collected between 1997 and 2005, of over a million queries each in order to investigate religious searching on the Web. Results point to four key findings. First, there is no evidence of a decrease in religious Web-searching behaviors. Religious interest is a persistent topic of Web searching. Second, those seeking religious information on the Web are becoming slightly more interactive in their searching. Third, there is no evidence for a move away from mainstream religions toward non-mainstream religions since the majority of the search terms are associated with established religions. Fourth, our work does not support the hypothesis that traditional religious affiliation is associated with lower adoption of or sophistication with technology. These factors point to the Web as a potentially usefully communication medium for a variety of religious organizations. © 2009 Elsevier Ltd. All rights reserved.

A temporal comparison of AltaVista Web searching

Major Web search engines, such as AltaVista, are essential tools in the quest to locate online information. This article reports research that used transaction log analysis to examine the characteristics and changes in AltaVista Web searching that occurred from 1998 to 2002. The research questions we examined are (1) What are the changes in AltaVista Web searching from 1998 to 2002? (2) What are the current characteristics of AltaVista searching, including the duration and frequency of search sessions? (3) What changes in the information needs of AltaVista users occurred between 1998 and 2002? The results of our research show (1) a move toward more interactivity with increases in session and query length, (2) with 70% of session durations at 5 minutes or less, the frequency of interaction is increasing, but it is happening very quickly, and (3) a broadening range of Web searchers' information needs, with the most frequent terms accounting for less than 1% of total term usage. We discuss the implications of these findings for the development of Web search engines. © 2005 Wiley Periodicals, Inc.

Using the web to look for work: Implications for online job seeking and recruiting

Purpose - The web is now a significant component of the recruitment and job search process. However, very little is known about how companies and job seekers use the web, and the ultimate effectiveness of this process. The specific research questions guiding this study are: how do people search for job-related information on the web? How effective are these searches? And how likely are job seekers to find an appropriate job posting or application? Design/methodology/approach - The data used to examine these questions come from job seekers submitting job-related queries to a major web search engine at three points in time over a five-year period. Findings - Results indicate that individuals seeking job information generally submit only one query with several terms and over 45 percent of job-seeking queries contain a specific location reference. Of the documents retrieved, findings suggest that only 52 percent are relevant and only 40 percent of job-specific searches retrieve job postings. Research limitations/implications - This study provides an important contribution to web research and online recruiting literature. The data come from actual web searches, providing a realistic glimpse into how job seekers are actually using the web. Practical implications - The results of this research can assist organizations in seeking to use the web as part of their recruiting efforts, in designing corporate recruiting web sites, and in developing web systems to support job seeking and recruiting. Originality/value - This research is one of the first studies to investigate job searching on the web using longitudinal real world data. © Emerald Group Publishing Limited.

Web searcher interaction with the Dogpile.com metasearch engine

Metasearch engines are an intuitive method for improving the performance of Web search by increasing coverage, returning large numbers of results with a focus on relevance, and presenting alternative views of information needs. However, the use of metasearch engines in an operational environment is not well understood. In this study, we investigate the usage of Dogpile.com, a major Web metasearch engine, with the aim of discovering how Web searchers interact with metasearch engines. We report results examining 2,465,145 interactions from 534,507 users of Dogpile.com on May 6, 2005 and compare these results with findings from other Web searching studies. We collect data on geographical location of searchers, use of system feedback, content selection, sessions, queries, and term usage. Findings show that Dogpile.com searchers are mainly from the USA (84% of searchers), use about 3 terms per query (mean = 2.85), implement system feedback moderately (8.4% of users), and generally (56% of users) spend less than one minute interacting with the Web search engine. Overall, metasearchers seem to have higher degrees of interaction than searchers on non-metasearch engines, but their sessions are for a shorter period of time. These aspects of metasearching may be what define the differences from other forms of Web searching. We discuss the implications of our findings in relation to metasearch for Web searchers, search engines, and content providers.

Using Web Search Logs to Identify Query Classification Terms

Purpose – The work presented in this paper aims to provide an approach to classifying web logs by personal properties of users. Design/methodology/approach – The authors describe an iterative system that begins with a small set of manually labeled terms, which are used to label queries from the log. A set of background knowledge related to these labeled queries is acquired by combining web search results on these queries. This background set is used to obtain many terms that are related to the classification task. The system then ranks each of the related terms, choosing those that most fit the personal properties of the users. These terms are then used to begin the next iteration. Findings – The authors identify the difficulties of classifying web logs, by approaching this problem from a machine learning perspective. By applying the approach developed, the authors are able to show that many queries in a large query log can be classified. Research limitations/implications – Testing results in this type of classification work is difficult, as the true personal properties of web users are unknown. Evaluation of the classification results in terms of the comparison of classified queries to well known age-related sites is a direction that is currently being exploring. Practical implications – This research is background work that can be incorporated in search engines or other web-based applications, to help marketing companies and advertisers. Originality/value – This research enhances the current state of knowledge in short-text classification and query log learning. Classification schemes, Computer networks, Information retrieval, Man-machine systems, User interfaces

Machinima

The research field was curatorship of the Machinima genre - a film-making practice that uses real time 3D computer graphics engines to create cinematic productions. The context was the presentation of gallery non-specific work for large-scale exhibition, as an investigation in thinking beyond traditional strategies of white cube. Strongly influenced by the Christiane Paul (Ed) seminal text, 'New Media in the White Cube and Beyond, Curatorial Models for Digital Art', the context was the repositioning of a genre traditionally focussed on delivery through small-screen, indoor, personal spaces, to large exhibition hall spaces. Beyond the core questions of collecting, documenting, expanding and rethinking the place of Machinima within the history of contemporary digital arts, the curatorial premise asked how to best invert the relationship between context of media production within the gaming domain, using novel presentational strategies that might best promote the 'take-home' impulse. The exhibition was used not as the ultimate destination for work but rather as a place to experience, sort and choose from a high volume of possible works for subsequent investigation by audiences within their own game-ready, domestic environments. In pursuit of this core aim, the exhibition intentionally promoted 'sensory overload'. The exhibition also included a gaming lab experience where audiences could begin to learn the DIY concepts of the medium, and be stimulated to revisit, consider and re-make their own relationship to this genre. The research was predominantly practice-led and collaborative (in close concert with the Machinima community), and ethnographic in that it sought to work with, understand and promote the medium in a contemporary art context. This benchmark exhibition, building on the 15-year history of the medium, was warmly received by the global Machinima community as evidenced by the significant debate, feedback and general interest recorded. The exhibition has recently begun an ongoing Australian touring schedule. To date, the exhibition has received critical attention nationally and internationally in Das Superpaper, the Courier Mail, Machinimart, 4ZZZ-FM, the Sydney Morning Herald, Games and Business, Australian Gamer, Kotaku Australia, and the Age.

Tabernacle-Game world

Tabernacle is an experimental game world-building project which explores the relationship between the map and the 3-dimensional visualisation enabled by high-end game engines. The project is named after the 6th century tabernacle maps of Cosmas Indicopleustes in his Christian Topography. These maps articulate a cultural or metaphoric, rather than measured view of the world, contravening Alper's distinction which observes that “maps are measurement, art is experience”. The project builds on previous research into the use of game engines and 3D navigable representation to enable cultural experience, particularly non-Western cultural experiences and ways of seeing. Like the earlier research, Tabernacle highlights the problematic disjuncture between the modern Cartesian map structures of the engine and the mapping traditions of non-Western cultures. Tabernacle represents a practice-based research provocation. The project exposes assumptions about the maps which underpin 3D game worlds, and the autocratic tendencies of world construction software. This research is of critical importance as game engines and simulation technologies are becoming more popular in the recreation of culture and history. A key learning from the Tabernacle project was the ways in which available game engines – technologies with roots in the Enlightenment - constrained the team’s ability to represent a very different culture with a different conceptualisation of space and maps. Understanding the cultural legacies of the software itself is critical as we are tempted by the opportunities for representation of culture and history that they seem to offer. The project was presented at Perth Digital Arts and Culture in 2007 and reiterated using a different game engine in 2009. Further reflections were discussed in a conference paper presented at OZCHI 2009 and a peer-reviewed journal article, and insights gained from the experience continue to inform the author’s research.

A comprehensive literature review of the pelvis and the lower extremity digital human models under quasi-static conditions

Finite Element Modeling (FEM) has become a vital tool in the automotive design and development processes. FEM of the human body is a technique capable of estimating parameters that are difficult to measure in experimental studies with the human body segments being modeled as complex and dynamic entities. Several studies have been dedicated to attain close-to-real FEMs of the human body (Pankoke and Siefert 2007; Amann, Huschenbeth et al. 2009; ESI 2010). The aim of this paper is to identify and appraise the state of-the art models of the human body which incorporate detailed pelvis and/or lower extremity models. Six databases and search engines were used to obtain literature, and the search was limited to studies published in English since 2000. The initial search results identified 636 pelvis-related papers, 834 buttocks-related papers, 505 thigh-related papers, 927 femur-related papers, 2039 knee-related papers, 655 shank-related papers, 292 tibia-related papers, 110 fibula-related papers, 644 ankle related papers, and 5660 foot-related papers. A refined search returned 100 pelvis-related papers, 45 buttocks related papers, 65 thigh-related papers, 162 femur-related papers, 195 kneerelated papers, 37 shank-related papers, 80 tibia-related papers, 30 fibula-related papers and 102 ankle-related papers and 246 foot-related papers. The refined literature list was further restricted by appraisal against a modified LOW appraisal criteria. Studies with unclear methodologies, with a focus on populations with pathology or with sport related dynamic motion modeling were excluded. The final literature list included fifteen models and each was assessed against the percentile the model represents, the gender the model was based on, the human body segment/segments included in the model, the sample size used to develop the model, the source of geometric/anthropometric values used to develop the model, the posture the model represents and the finite element solver used for the model. The results of this literature review provide indication of bias in the available models towards 50th percentile male modeling with a notable concentration on the pelvis, femur and buttocks segments.

Separation of acoustic emission signals from small size multi-cylinder diesel engine

This paper presents techniques which can lead to diagnosis of faults in a small size multi-cylinder diesel engine. Preliminary analysis of the acoustic emission (AE) signals is outline, including time-frequency analysis and selection of optimum frequency band.The results of applying mean field independent component analysis (MFICA) to separate the AE root mean square (RMS) signals and the effects of changing parameter values are also outlined. The results on separation of RMS signals show thsi technique has the potential of increasing the probability to successfully identify the AE events associated with the various mechanical events within the combustion process of multi-cylinder diesel engines.