Sections of the city : architecturalising the tools of urban morphology

The study of urban morphology has become an expanding field of research within the architectural discipline, providing theories to be used as tools in the understanding and design of urban landscapes from the past, the present and into the future. Drawing upon contemporary architectural design theory, this investigation reveals what a sectional analysis of an urban landscape can add to the existing research methods within this field. This paper conducts an enquiry into the use of the section as a tool for urban morphological analysis. Following the methodology of the British school of urban morphology, sections through the urban fabric of the case study city of Brisbane are compared. The results are categorised to depict changes in scale, components and utilisation throughout various timeframes. The key findings illustrate how the section, when read in conjunction with the plan can be used to interpret changes to urban form and the relationship that this has to the quality of the urban environment in the contemporary city.

A business model for an inclusive entrepreneurial development

In 2004 Prahalad made managers aware of the great economic opportunity that the population at the BoP (Base of the Pyramid) represents for business in the form of new potential consumers. However, MNCs (Multi-National Corporations) generally continue to penetrate low income markets with the same strategies used at the top of the pyramid or choose not to invest at all in these regions because intimidated by having to re-envision their business models. The introduction of not re-arranged business models and products into developing countries has done nothing more over the years than induce new needs and develop new dependencies. By conducting a critical review of the literature this paper investigates and compares innovative approaches to operate in developing markets, which depart from the usual Corporate Social Responsibility marketing rhetoric, and rather consider the potential consumer at the BoP as a ring of continuity in the value chain − a resource that can itself produce value. Based on the concept of social embeddedness (London & Hart, 2004) and the principle that an open system contemplates different provisions (i.e. MNCs bring processes and technology, NGOs cultural mediating skills, governments laws and regulations, native people know-how and traditions), this paper concludes with a new business model reference that empowers all actors to contribute to value creation, while allowing MNCs to support local growth by turning what Prahalad called ‘inclusive capitalism’ into a more sustainable ‘inclusive entrepreneurial development’.

Editorial

On a balmy summer morning a small group of us gathered for breakfast at the China National Convention Centre in Beijing during the 2010 ISME World Conference. As the cafe started to fill up with delegates from around the globe, we sat intently discussing our grand plan. Quite simply, we wanted to develop a network of community music practitioners and scholars in the Asia Pacific region. Inspired by the Community Music Activity (CMA) Commission we had just attended in Hangzhou the week before, we felt a pressing need to keep the seminar’s momentum going. During the seminar we had heard many stories and examples of musical practices, community contexts, pedagogical approaches and research ethics; however, set against the backdrop of this Chinese context, these familiar topics seemed to take on a new meaning (see Bartleet 2011). As we experienced the local culture and interacted with some of our Chinese colleagues, we were reminded that the concept of community is always contextual, contingent and contested(see Elliott et al. 2008: 3). We were also reminded that notions of what community music is and its social and educational functions are always fluid and varied depending on where you are in the world. After the seminar, our sense was that there are new voices and ideas relating to community music coming from this region that need to be heard. We hoped that this network would serve as a vehicle for activating relationships between these practitioners and scholars, as well as a channel for developing cross cultural partnerships, and disseminating research about community music in this region. On the surface this goal seemed quite straightforward...

An overview of CARRS-Q’s advanced driving simulator

The global road safety problem The role of human factors in road crashes The use of driving simulators in road safety research The CARRS-Q advanced driving simulator –Functionality –Problems encountered and related solutions Past and current projects using the driving simulator Limitations of driving simulators

Candidate radial-inflow turbines and high-density working fluids for geothermal power systems

Optimisation of Organic Rankine Cycles (ORCs) for binary-cycle geothermal applications could play a major role in the competitiveness of low to moderate temperature geothermal resources. Part of this optimisation process is matching cycles to a given resource such that power output can be maximised. Two major and largely interrelated components of the cycle are the working fluid and the turbine. Both components need careful consideration. Due to the temperature differences in geothermal resources a one-size-fits-all approach to surface power infrastructure is not appropriate. Furthermore, the traditional use of steam as a working fluid does not seem practical due to the low temperatures of many resources. A variety of organic fluids with low boiling points may be utilised as ORC working fluids in binary power cycle loops. Due to differences in thermodynamic properties, certain fluids are able to extract more heat from a given resource than others over certain temperature and pressure ranges. This enables the tailoring of power cycle infrastructure to best match the geothermal resource through careful selection of the working fluid and turbine design optimisation to yield the optimum overall cycle performance. This paper presents the rationale for the use of radial-inflow turbines for ORC applications and the preliminary design of several radial-inflow turbines based on a selection of promising ORC cycles using five different high-density working fluids: R134a, R143a, R236fa, R245fa and n-Pentane at sub- or trans-critical conditions. Numerous studies published compare a variety of working fluids for various ORC configurations. However, there is little information specifically pertaining to the design and implementation of ORCs using realistic radial turbine designs in terms of pressure ratios, inlet pressure, rotor size and rotational speed. Preliminary 1D analysis leads to the generation of turbine designs for the various cycles with similar efficiencies (77%) but large differences in dimensions (139289 mm rotor diameter). The highest performing cycle (R134a) was found to produce 33% more net power from a 150°C resource flowing at 10 kg/s than the lowest performing cycle (n-Pentane).

In focus : the Personal Property Securities Act 2009 (Cth)

Australia has new national legislation - the Personal Property Securities Act 2009 (Cth) and the Personal Property Securities Regulations 2010 – which commenced operation on 30 January 2012. Previous personal property securities legislation was very complex, with more than seventy pieces of legislation in the states and territories, and more than forty registers. This reform package is the culmination of a process that began many years ago and various drafts have been the subject of much investigation and consultation. This legislation rationalises previous laws and bring about substantial changes to this area of law. This paper seeks to explain the principal changes and their implications.

Shut up & write! Facilitating informal learning in doctoral education

Providing help for research degree writing within a formal structure is difficult because research students come into their degree with widely varying needs and levels of experience. Providing writing assistance within a less structured learning context is an approach which has been trialled in higher education with promising results (Boud, Cohen & Sampson, 2001; Stracke, 2010; Devendish et al., 2009). While semi structured approaches have been the subject of study, little attention has been paid to the processes of informal learning which exist within doctoral education. In this paper we explore a 'writing movement' which has started to be taken up at various locations in Australia through the auspices of social media (Twitter and Facebook). 'Shut up and Write' is a concept first used in the cafe scene in San Francisco, where writers converge at a specific time and place and write together, without showing each other the outcomes, temporarily transforming writing from a solitary practice to a social one. In this paper we compare the experience of facilitating shut up and write sessions in two locations: RMIT University and Queensland University of Technology. The authors describe the set up and functioning of the different groups and report on feedback from regular participants, both physical and virtual. We suggest that informal learning practices can be exploited to assist research students to orientate themselves to the university environment and share vital technical skills, with very minimal input from academic staff. This experience suggests there is untapped potential within these kinds of activities to promote learning within the research degree experience which is sustainable and builds a stronger sense of community.

Learning landscapes 2.0 : warning - assembly required

Twenty first century learners operate in organic, immersive environments. A pedagogy of student-centred learning is not a recipe for rooms. A contemporary learning environment is like a landscape that grows, morphs, and responds to the pressures of the context and micro-culture. There is no single adaptable solution, nor a suite of off-the-shelf answers; propositions must be customisable and infinitely variable. They must be indeterminate and changeable; based on the creation of learning places, not restrictive or constraining spaces. A sustainable solution will be un-fixed, responsive to the life cycle of the components and materials, able to be manipulated by the users; it will create and construct its own history. Learning occurs as formal education with situational knowledge structures, but also as informal learning, active learning, blended learning social learning, incidental learning, and unintended learning. These are not spatial concepts but socio-cultural patterns of discovery. Individual learning requirements must run free and need to be accommodated as the learner sees fit. The spatial solution must accommodate and enable a full array of learning situations. It is a system not an object. Three major components: 1. The determinate landscape: in-situ concrete 'plate' that is permanent. It predates the other components of the system and remains as a remnant/imprint/fossil after the other components of the system have been relocated. It is a functional learning landscape in its own right; enabling a variety of experiences and activities. 2. The indeterminate landscape: a kit of pre-fabricated 2-D panels assembled in a unique manner at each site to suit the client and context. Manufactured to the principles of design-for-disassembly. A symbiotic barnacle like system that attaches itself to the existing infrastructure through the determinate landscape which acts as a fast growth rhizome. A carapace of protective panels, infinitely variable to create enclosed, semi-enclosed, and open learning places. 3. The stations: pre-fabricated packages of highly-serviced space connected through the determinate landscape. Four main types of stations; wet-room learning centres, dry-room learning centres, ablutions, and low-impact building services. Entirely customised at the factory and delivered to site. The stations can be retro-fitted to suit a new context during relocation. Principles of design for disassembly: material principles • use recycled and recyclable materials • minimise the number of types of materials • no toxic materials • use lightweight materials • avoid secondary finishes • provide identification of material types component principles • minimise/standardise the number of types of components • use mechanical not chemical connections • design for use of common tools and equipment • provide easy access to all components • make component size to suite means of handling • provide built in means of handling • design to realistic tolerances • use a minimum number of connectors and a minimum number of types system principles • design for durability and repeated use • use prefabrication and mass production • provide spare components on site • sustain all assembly and material information