Performance evaluation of onsite wastewater treatment : field sampling and preliminary evaluation of results

Background The onsite treatment of sewage and effluent disposal within the premises is widely prevalent in rural and urban fringe areas due to the general unavailability of reticulated wastewater collection systems. Despite the seemingly low technology of the systems, failure is common and in many cases leading to adverse public health and environmental consequences. Therefore it is important that careful consideration is given to the design and location of onsite sewage treatment systems. It requires an understanding of the factors that influence treatment performance. The use of subsurface effluent absorption systems is the most common form of effluent disposal for onsite sewage treatment and particularly for septic tanks. Additionally in the case of septic tanks, a subsurface disposal system is generally an integral component of the sewage treatment process. Therefore location specific factors will play a key role in this context. The project The primary aims of the research project are: • to relate treatment performance of onsite sewage treatment systems to soil conditions at site; • to identify important areas where there is currently a lack of relevant research knowledge and is in need of further investigation. These tasks were undertaken with the objective of facilitating the development of performance based planning and management strategies for onsite sewage treatment. The primary focus of the research project has been on septic tanks. Therefore by implication the investigation has been confined to subsurface soil absorption systems. The design and treatment processes taking place within the septic tank chamber itself did not form a part of the investigation. In the evaluation to be undertaken, the treatment performance of soil absorption systems will be related to the physico-chemical characteristics of the soil. Five broad categories of soil types have been considered for this purpose. The number of systems investigated was based on the proportionate area of urban development within the Brisbane region located on each soil types. In the initial phase of the investigation, though the majority of the systems evaluated were septic tanks, a small number of aerobic wastewater treatment systems (AWTS) were also included. This was primarily to compare the effluent quality of systems employing different generic treatment processes. It is important to note that the number of different types of systems investigated was relatively small. As such this does not permit a statistical analysis to be undertaken of the results obtained. This is an important issue considering the large number of parameters that can influence treatment performance and their wide variability. The report This report is the second in a series of three reports focussing on the performance evaluation of onsite treatment of sewage. The research project was initiated at the request of the Brisbane City Council. The work undertaken included site investigation and testing of sewage effluent and soil samples taken at distances of 1 and 3 m from the effluent disposal area. The project component discussed in the current report formed the basis for the more detailed investigation undertaken subsequently. The outcomes from the initial studies have been discussed, which enabled the identification of factors to be investigated further. Primarily, this report contains the results of the field monitoring program, the initial analysis undertaken and preliminary conclusions. Field study and outcomes Initially commencing with a list of 252 locations in 17 different suburbs, a total of 22 sites in 21 different locations were monitored. These sites were selected based on predetermined criteria. To obtain house owner agreement to participate in the monitoring study was not an easy task. Six of these sites had to be abandoned subsequently due to various reasons. The remaining sites included eight septic systems with subsurface effluent disposal and treating blackwater or combined black and greywater, two sites treating greywater only and six sites with AWTS. In addition to collecting effluent and soil samples from each site, a detailed field investigation including a series of house owner interviews were also undertaken. Significant observations were made during the field investigations. In addition to site specific observations, the general observations include the following: • Most house owners are unaware of the need for regular maintenance. Sludge removal has not been undertaken in any of the septic tanks monitored. Even in the case of aerated wastewater treatment systems, the regular inspections by the supplier is confined only to the treatment system and does not include the effluent disposal system. This is not a satisfactory situation as the investigations revealed. • In the case of separate greywater systems, only one site had a suitably functioning disposal arrangement. The general practice is to employ a garden hose to siphon the greywater for use in surface irrigation of the garden. • In most sites, the soil profile showed significant lateral percolation of effluent. As such, the flow of effluent to surface water bodies is a distinct possibility. • The need to investigate the subsurface condition to a depth greater than what is required for the standard percolation test was clearly evident. On occasion, seemingly permeable soil was found to have an underlying impermeable soil layer or vice versa. The important outcomes from the testing program include the following: • Though effluent treatment is influenced by the physico-chemical characteristics of the soil, it was not possible to distinguish between the treatment performance of different soil types. This leads to the hypothesis that effluent renovation is significantly influenced by the combination of various physico-chemical parameters rather than single parameters. This would make the processes involved strongly site specific. • Generally the improvement in effluent quality appears to take place only within the initial 1 m of travel and without any appreciable improvement thereafter. This relates only to the degree of improvement obtained and does not imply that this quality is satisfactory. This calls into question the value of adopting setback distances from sensitive water bodies. • Use of AWTS for sewage treatment may provide effluent of higher quality suitable for surface disposal. However on the whole, after a 1-3 m of travel through the subsurface, it was not possible to distinguish any significant differences in quality between those originating from septic tanks and AWTS. • In comparison with effluent quality from a conventional wastewater treatment plant, most systems were found to perform satisfactorily with regards to Total Nitrogen. The success rate was much lower in the case of faecal coliforms. However it is important to note that five of the systems exhibited problems with regards to effluent disposal, resulting in surface flow. This could lead to possible contamination of surface water courses. • The ratio of TDS to EC is about 0.42 whilst the optimum recommended value for use of treated effluent for irrigation should be about 0.64. This would mean a higher salt content in the effluent than what is advisable for use in irrigation. A consequence of this would be the accumulation of salts to a concentration harmful to crops or the landscape unless adequate leaching is present. These relatively high EC values are present even in the case of AWTS where surface irrigation of effluent is being undertaken. However it is important to note that this is not an artefact of the treatment process but rather an indication of the quality of the wastewater generated in the household. This clearly indicates the need for further research to evaluate the suitability of various soil types for the surface irrigation of effluent where the TDS/EC ratio is less than 0.64. • Effluent percolating through the subsurface absorption field may travel in the form of dilute pulses. As such the effluent will move through the soil profile forming fronts of elevated parameter levels. • The downward flow of effluent and leaching of the soil profile is evident in the case of podsolic, lithosol and kransozem soils. Lateral flow of effluent is evident in the case of prairie soils. Gleyed podsolic soils indicate poor drainage and ponding of effluent. In the current phase of the research project, a number of chemical indicators such as EC, pH and chloride concentration were employed as indicators to investigate the extent of effluent flow and to understand how soil renovates effluent. The soil profile, especially texture, structure and moisture regime was examined more in an engineering sense to determine the effect of movement of water into and through the soil. However it is not only the physical characteristics, but the chemical characteristics of the soil also play a key role in the effluent renovation process. Therefore in order to understand the complex processes taking place in a subsurface effluent disposal area, it is important that the identified influential parameters are evaluated using soil chemical concepts. Consequently the primary focus of the next phase of the research project will be to identify linkages between various important parameters. The research thus envisaged will help to develop robust criteria for evaluating the performance of subsurface disposal systems.

Active versus passive screen time for young children

In this paper, we report some initial findings from our investigations into the Australian Government’s Longitudinal Study of Australian Children dataset. It is revealed that the majority of Australian children are exceeding the government’s Screen Time recommendations and that most of their screen time is spent as TV viewing, as opposed to video game play or computer use. In light of this finding,we review the body of research surrounding children’s engagement in Screen Time activities and the associated positive and negative effects. Based on existing evidence,we define two categories of Screen Time—Active Screen Time and Passive Screen Time. It is proposed that this distinction provides a more accurate classification of Screen Time and a more informative lens through which to consider the associated benefits and detrimental effects for young children.

Towards Bayesian experimental design for nonlinear models that require a large number of sampling times

The use of Bayesian methodologies for solving optimal experimental design problems has increased. Many of these methods have been found to be computationally intensive for design problems that require a large number of design points. A simulation-based approach that can be used to solve optimal design problems in which one is interested in finding a large number of (near) optimal design points for a small number of design variables is presented. The approach involves the use of lower dimensional parameterisations that consist of a few design variables, which generate multiple design points. Using this approach, one simply has to search over a few design variables, rather than searching over a large number of optimal design points, thus providing substantial computational savings. The methodologies are demonstrated on four applications, including the selection of sampling times for pharmacokinetic and heat transfer studies, and involve nonlinear models. Several Bayesian design criteria are also compared and contrasted, as well as several different lower dimensional parameterisation schemes for generating the many design points.

Glider path-planning for optimal sampling of mesocale eddies

Ocean gliders constitute an important advance in the highly demanding ocean monitoring scenario. Their effciency, endurance and increasing robustness make these vehicles an ideal observing platform for many long term oceanographic applications. However, they have proved to be also useful in the opportunis-tic short term characterization of dynamic structures. Among these, mesoscale eddies are of particular interest due to the relevance they have in many oceano-graphic processes.

Collective sampling and analysis of high order tensors for chatroom communications

This work investigates the accuracy and efficiency tradeoffs between centralized and collective (distributed) algorithms for (i) sampling, and (ii) n-way data analysis techniques in multidimensional stream data, such as Internet chatroom communications. Its contributions are threefold. First, we use the Kolmogorov-Smirnov goodness-of-fit test to show that statistical differences between real data obtained by collective sampling in time dimension from multiple servers and that of obtained from a single server are insignificant. Second, we show using the real data that collective data analysis of 3-way data arrays (users x keywords x time) known as high order tensors is more efficient than centralized algorithms with respect to both space and computational cost. Furthermore, we show that this gain is obtained without loss of accuracy. Third, we examine the sensitivity of collective constructions and analysis of high order data tensors to the choice of server selection and sampling window size. We construct 4-way tensors (users x keywords x time x servers) and analyze them to show the impact of server and window size selections on the results.

Cause of Death, Trend and Disease Burden in Shandong Province, China : the Third Retrospective Sampling Survey of Cause of Death Report

This book describes the mortality for all causes of death and the trend in major causes of death since 1970s in Shandong Province, China.

Sex discrimination and non-random sampling in the Australian labour market

Historically a significant gap between male and female wages has existed in the Australian labour market. Indeed this wage differential was institutionalised in the 1912 arbitration decision which determined that the basic female wage would be set at between 54 and 66 per cent of the male wage. More recently however, the 1969 and 1972 Equal Pay Cases determined that male/female wage relativities should be based upon the premise of equal pay for work of equal value. It is important to note that the mere observation that average wages differ between males and females is not sine qua non evidence of sex discrimination. Economists restrict the definition of wage discrimination to cases where two distinct groups receive different average remuneration for reasons unrelated to differences in productivity characteristics. This paper extends previous studies of wage discrimination in Australia (Chapman and Mulvey, 1986; Haig, 1982) by correcting the estimated male/female wage differential for the existence of non-random sampling. Previous Australian estimates of male/female human capital basedwage specifications together with estimates of the corresponding wage differential all suffer from a failure to address this issue. If the sample of females observed to be working does not represent a random sample then the estimates of the male/female wage differential will be both biased and inconsistent.

The role for police in addressing alcohol-related harm inside and outside licensed premises

Alcohol consumption is enmeshed with Australian culture (Palk, 2008) and the use and misuse of alcohol contributes to considerable health and social harms (Barbor et al., 2010; English et al., 1995; Gutjahr, Gmel, & Rehm, 2001; Palk, 2008; Steenkamp, Harrison, & Allsop, 2002). Despite shifts in the way that alcohol is consumed and how it is used, it has been reported that one-third of all alcohol consumed is done so within licensed premises (Lang, Stockwell, Rydon, & Gamble, 1992). Consequently, licensed premises are over-represented as settings in which alcohol-related harms occur. These harms, particularly those related to violence, are associated with particular licensed premises operating in the night-time economy (Briscoe & Donnelly, 2001b; Chikritzhs, Stockwell, & Masters, 1997; Homel, Tomsen, & Thommeny, 1991; Stockwell, 1997). Police have a role in not only responding to the manifestation of harms, such as crime, injuries, assaults, domestic violence, stealing and sexual offences, but they also have a role in preventing problems, and thereby reducing alcohol and other drug-related harms (Doherty & Roche, 2003). Given the extent of alcohol consumption within licensed premises and the nature and extent of the harms, as well as the lack of opportunity to influence outcomes in other settings (e.g. the home), licensed premises offer police and other stakeholders a significant opportunity to influence positively the reduction of alcoholrelated harm. This research focuses specifically on the police role in policing licensed premises. Primarily, this research aims to investigate the factors which are relevant to why and how police officers respond to alcohol-related incidents inside and outside licensed premises. It examines the attitudes and beliefs of police and assesses their knowledge, capacity and ability to effectively police licensed premises. The research methodology uses three distinct surveys. Each contributes to understanding the motivations and practice of police officers in this important area of harm reduction. Study One involved a survey of police officers within a police district (Brisbane Central District) in Queensland, Australia and used a comprehensive questionnaire involving both quantitative and qualitative techniques. A key research outcome of Study One was the finding that officers had low levels of knowledge of the strategies that are effective in addressing alcohol-related harm both inside and outside licensed premises. Paradoxically, these officers also reported extensive recent experience in dealing with alcohol issues in these locations. In addition, these officers reported that alcohol was a significant contextual factor in the majority of matters to which they responded. Officers surveyed reported that alcohol increased the difficulty of responding to situations and that licensed premises (e.g. nightclubs, licensed clubs and hotels) were the most difficult contexts to police. Those surveyed were asked to self-assess their knowledge of the Liquor Act (Qld), which is the primary legislative authority in Queensland for regulating licensed premises. Surprisingly, well over half of the officers (65%) reported ‘no’ to ‘fair’ knowledge of the Act, despite officers believing that their skill level to police such premises was in the ‘good to very good range’. In an important finding, officers reported greater skill level to police outside licensed premises than inside such premises, indicating that officers felt less capable, from a skill perspective, to operate within the confines of a licensed premise than in the environment immediately outside such premises. Another key finding was that officers reported greater levels of training in responding to situations outside and around licensed premises than to situations inside licensed premises. Officers were also asked to identify the frequency with which they employed specified regulatory enforcement and community-based strategies. Irrespective of the type of response, ‘taking no action’ or passive policing interventions were not favoured by officers. The findings identified that officers favoured taking a range of strategies (sending home, releasing into the custody of friends, etc.) in preference to arrest. In another key finding, officers generally reported their support for operational stakeholder partnership approaches to policing licensed premises. This was evidenced by the high number of officers (over 90%) reporting that there should be shared responsibility for enforcing the provisions of the Liquor Act. Importantly, those surveyed also identified the factors which constrain or prevent them from policing licensed premises. Study Two involved interviewing a small but comprehensive group (n=11) of senior managers from within the Queensland Police Service (QPS) who have responsibility for setting operational and strategic policy. The aim of this study was to examine the attitudes, perceptions and influence that senior officers (at the strategy and policy-setting level) had on the officers at the operational level. This qualitative study was carried out using a purposive sampling (Denzin & Lincoln, 2005; Guba & Lincoln, 1989), focused interview and thematic analytic approach. The interview participants were drawn from three tiers of management at district, regional as well as the whole-of-organisational level. The first key theme emerging from the study related to role, in terms of both the QPS broader organisational role, and the individual officer role with respect to the policing of licensed premises. For the QPS organisational role, participants at all three strategic levels had a high degree of congruity as to the organisations service role; that is, to enhance public safety. With respect to participants’ beliefs as to whether police officers have knowledge and understanding of their individual roles concerning licensed premises (as opposed to the QPS role), participants reported most commonly that officers had a reasonable to clear understanding of their role. Participant comments also were supportive of the view that officers operating in the research area, Brisbane Central District (BCD), had a clearer understanding of their role than police operating in other locations. The second key theme to emerge identified a disparity between the knowledge and capability of specialist police, compared with general duties police, to police licensed premises. In fact, a number of the responses to a variety of questions differentiated specialist and general police in a range of domains. One such example related to the clarity of understanding of officer role. Participants agreed that specialist police (Liquor Enforcement & Proactive Strategies [LEAPS] officers) had more clarity of understanding in terms of their role than generalist police. Participants also were strongly of the opinion that specialist police had higher skill levels to deal with issues both inside and outside licensed premises. Some participants expressed the view that general duty police undertook purely response-related activities, or alternatively, dealt with lower order matters. Conversely, it was viewed that specialist police undertook more complex tasks because of their higher levels of knowledge and skill. The third key theme to emerge concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Participant responses strongly indicated that there was a diversity of resourcing barriers that restrict police from undertaking their roles in licensed premises. Examples of such barriers were the lack of police and the low ratio of police to patrons, available officer time, and lack of organisational investment in skills and knowledge acquisition. However, some participants indicated that police resourcing in the BCD was appropriate and officers were equipped with sufficient powers (policy and legislation). Again, the issue of specialist police was raised by one participant who argued that increasing the numbers of specialist police would ameliorate the difficulties for police officers policing licensed premises. The fourth and last key theme to emerge from Study Two related to the perception of senior officers regarding the opportunity and capability of officers to leverage off external partnerships to reduce harms inside and outside licensed premises. Police working in partnership in BCD was seen as an effective harm reduction strategy and strongly supported by the participants. All participants demonstrated a high degree of knowledge as to who these partners were and could identify those government, non-government and community groups precisely. Furthermore, the majority of participants also held strong views that the partnerships were reasonably effective and worked to varying degrees depending on the nature of the partnership and issues such as resourcing. These senior officers identified better communication and coordination as factors that could potentially strengthen these partnerships. This research finding is particularly important for senior officers who have the capacity to shape the policy and strategic direction of the police service, not only in Queensland but throughout Australasia. Study Three examined the perceptions of those with links to the broader liquor industry (government, non-government and community but exclusive of police) concerning their understanding of the police role and the capacity of police to reduce alcohol-related harm inside and outside licensed premises, and their attitudes towards police. Participants (n=26) surveyed represented a range of areas including the liquor industry, business represenatives and government representatives from Queensland Fire and Rescue Service, Queensland Ambulance Service, Brisbane City Council and Queensland Health. The first key theme to emerge from Study Three related to participant understanding of the QPS organisational role, and importantly, individual officer role in policing licensed premises. In terms of participant understanding of the QPS role there was a clear understanding by the majority of participants that the police role was to act in ways consistent with the law and to otherwise engage in a range of enforcement-related activities. Participants saw such activities falling into two categories. The first category related to reactive policing, which included actions around responding to trouble in licensed premises, monitoring crowd controllers and removing trouble-makers. In the second category, proactive approaches, participants identified the following activities as consistent with that approach: early intervention with offenders, support of licensed premises operators and high visibility policing. When participants were asked about their understanding of individual officer roles in the policing of licensed premises, a range of responses were received but the consistent message that emerged was that there is a different role to be played by general duty (uniformed) police compared to specialist (LEAPS Unit) police, which reflects differences in knowledge, skill and capability. The second key theme that emerged from the data related to the external participants’ views of the knowledge and capability of specialist police, compared with general duty police, to police licensed premises. As noted in the first key theme, participants were universally of the view that the knowledge, skill and capability of police in specialist units (LEAPS Unit) was at a higher level than that of general duty police. Participants observed that these specialist officers were better trained than their colleagues in generalist areas and were therefore better able to intervene knowledgeably and authoritatively to deal with problems and issues as they emerged. Participants also reported that officers working within BCD generally had a positive attitude to their duties and had important local knowledge that they could use in the resolution of alcohol-related issues. Participants also commented on the importance of sound and effective QPS leadership, as well as the quality of the leadership in BCD. On both these measures, there was general consensus from participants, who reported positively on the importance and effectiveness of such leadership in BCD. The third key theme to emerge from Study Three concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Overwhelmingly, external participants reported the lack of human resources (i.e. police officers) as the key barrier. Other resourcing limitations, such as available officer time, police computer systems, and the time taken to charge offenders, were identified as barriers. Some participants identified barriers in the liquor industry such as ‘dodgy operators’ and negative media attention as limitations. Other constraints to emerge related to government and policy barriers. These were reflected in comments about the collection by government of fees from licensees and better ‘powers’ for police to deal with offenders. The fourth and final key theme that emerged from Study Three related to the opportunities for and capability of police to leverage off external partnerships to reduce harms inside and outside licensed premises. Not surprisingly, participants had a comprehensive knowledge of a broad range of stakeholders, from a diversity of contexts, influential in addressing issues in licensed premises. Many participants reported their relationships with the police and other stakeholders as effective, productive and consistent with the objectives of partnering to reduce alcohol-related harm. On the other hand, there were those who were concerned with their relationship with other stakeholders, particularly those with a compliance function (e.g. Office of Liquor & Gaming Regulation [OLGR]). The resourcing limitations of partners and stakeholders were also raised as an important constraining factor in fulfilling the optimum relationship. Again, political issues were mentioned in terms of the impact on partnerships, with participants stating that there is at times political interference and that politicians complicate the relationships of stakeholders. There are some significant strengths with respect to the methodology of this research. The research is distinguished from previous work in that it examines these critical issues from three distinct perspectives (i.e. police officer, senior manager and external stakeholder). Other strengths relate to the strong theoretical framework that guides and informs the research. There are also some identified limitations, including the subjective nature of self-report data as well as the potential for bias by the author, which was controlled for using a range of initiatives. A further limitation concerns the potential for transferability and generalisability of the findings to other locations given the distinctive nature of the BCD. These limitations and issues of transferability are dealt with at length in the thesis. Despite a growing body of literature about contextual harms associated with alcohol, and specific research concerning police intervention in such contextual harms, there is still much to learn. While research on the subject of police engaging in alcohol-related incidents has focused on police behaviours and strategies in response to such issues, there is a paucity of research that focuses on the knowledge and understanding of officers engaged in such behaviours and practices. Given the scarcity of research dealing with the knowledge, skills and attitudes of police officers responding to harms inside and outside licensed premises, this research contributes significantly to what is a recent and growing body of research and literature in the field. The research makes a practical contribution to police agencies’ understanding of officer knowledge and police practice in ways that have the potential to shape education and training agendas, policy approaches around generalist versus specialist policing, strategic and operational strategy, as well as partnership engagements. The research also makes a theoretical contribution given that the research design is informed by the Three Circle

Sampling stored-product insect pests : a comparison of four statistical sampling models for probability of pest detection

Background: Developing sampling strategies to target biological pests such as insects in stored grain is inherently difficult owing to species biology and behavioural characteristics. The design of robust sampling programmes should be based on an underlying statistical distribution that is sufficiently flexible to capture variations in the spatial distribution of the target species. Results: Comparisons are made of the accuracy of four probability-of-detection sampling models - the negative binomial model,1 the Poisson model,1 the double logarithmic model2 and the compound model3 - for detection of insects over a broad range of insect densities. Although the double log and negative binomial models performed well under specific conditions, it is shown that, of the four models examined, the compound model performed the best over a broad range of insect spatial distributions and densities. In particular, this model predicted well the number of samples required when insect density was high and clumped within experimental storages. Conclusions: This paper reinforces the need for effective sampling programs designed to detect insects over a broad range of spatial distributions. The compound model is robust over a broad range of insect densities and leads to substantial improvement in detection probabilities within highly variable systems such as grain storage.

Sampling environmental acoustic recordings to determine bird species richness

Acoustic sensors can be used to estimate species richness for vocal species such as birds. They can continuously and passively record large volumes of data over extended periods. These data must subsequently be analyzed to detect the presence of vocal species. Automated analysis of acoustic data for large numbers of species is complex and can be subject to high levels of false positive and false negative results. Manual analysis by experienced surveyors can produce accurate results; however the time and effort required to process even small volumes of data can make manual analysis prohibitive. This study examined the use of sampling methods to reduce the cost of analyzing large volumes of acoustic sensor data, while retaining high levels of species detection accuracy. Utilizing five days of manually analyzed acoustic sensor data from four sites, we examined a range of sampling frequencies and methods including random, stratified, and biologically informed. We found that randomly selecting 120 one-minute samples from the three hours immediately following dawn over five days of recordings, detected the highest number of species. On average, this method detected 62% of total species from 120 one-minute samples, compared to 34% of total species detected from traditional area search methods. Our results demonstrate that targeted sampling methods can provide an effective means for analyzing large volumes of acoustic sensor data efficiently and accurately. Development of automated and semi-automated techniques is required to assist in analyzing large volumes of acoustic sensor data. Read More: http://www.esajournals.org/doi/abs/10.1890/12-2088.1

Passive control of a biventricular assist device with compliant inflow cannulae

Rotary ventricular assist device (VAD) support of the cardiovascular system is susceptible to suction events due to the limited preload sensitivity of these devices. This may be of particular concern with rotary biventricular support (BiVAD) where the native, flow-balancing Starling response is diminished in both ventricles. The reliability of sensor and sensor-less based control systems which aim to control VAD flow based on preload have limitations and thus an alternative solution is desired. This study introduces a compliant inflow cannula (CIC) which could improve the preload sensitivity of a rotary VAD by passively altering VAD flow depending on preload. To evaluate the design, both the CIC and a standard rigid inflow cannula were inserted into a mock circulation loop to enable biventricular heart failure support using configurations of atrial and ventricular inflow, and arterial outflow cannulation. A range of left (LVAD) and right VAD (RVAD) rotational speeds were tested as well as step changes in systemic/pulmonary vascular resistance to alter relative preloads, with resulting flow rates recorded. Simulated suction events were observed, particularly at higher VAD speeds, during support with the rigid inflow cannula, while the CIC prevented suction events under all circumstances. The compliant section passively restricted its internal diameter as preload was reduced, which increased the VAD circuit resistance and thus reduced VAD flow. Therefore, a compliant inflow cannula could potentially be used as a passive control system to prevent suction events in rotary left, right and biventricular support.

Sampling designs on stream networks using the pseudo-Bayesian approach

Monitoring stream networks through time provides important ecological information. The sampling design problem is to choose locations where measurements are taken so as to maximise information gathered about physicochemical and biological variables on the stream network. This paper uses a pseudo-Bayesian approach, averaging a utility function over a prior distribution, in finding a design which maximizes the average utility. We use models for correlations of observations on the stream network that are based on stream network distances and described by moving average error models. Utility functions used reflect the needs of the experimenter, such as prediction of location values or estimation of parameters. We propose an algorithmic approach to design with the mean utility of a design estimated using Monte Carlo techniques and an exchange algorithm to search for optimal sampling designs. In particular we focus on the problem of finding an optimal design from a set of fixed designs and finding an optimal subset of a given set of sampling locations. As there are many different variables to measure, such as chemical, physical and biological measurements at each location, designs are derived from models based on different types of response variables: continuous, counts and proportions. We apply the methodology to a synthetic example and the Lake Eacham stream network on the Atherton Tablelands in Queensland, Australia. We show that the optimal designs depend very much on the choice of utility function, varying from space filling to clustered designs and mixtures of these, but given the utility function, designs are relatively robust to the type of response variable.

Automated surface sampling of lipids from worn contact lenses coupled with tandem mass spectrometry

The deposition of biological material (biofouling) onto polymeric contact lenses is thought to be a major contributor to lens discomfort and hence discontinuation of wear. We describe a method to characterize lipid deposits directly from worn contact lenses utilizing liquid extraction surface analysis coupled to tandem mass spectrometry (LESA-MS/MS). This technique effected facile and reproducible extraction of lipids from the contact lens surfaces and identified lipid molecular species representing all major classes present in human tear film. Our data show that LESA-MS/MS is a rapid and comprehensive technique for the characterization of lipid-related biofouling on polymer surfaces.