Scaling of free convection heat transfer in a triangular cavity for Pr>1

Unsteady natural convection inside a triangular cavity subject to a non-instantaneous heating on the inclined walls in the form of an imposed temperature which increases linearly up to a prescribed steady value over a prescribed time is reported. The development of the flow from start-up to a steady-state has been described based on scaling analyses and direct numerical simulations. The ramp temperature has been chosen in such a way that the boundary layer is reached a quasi-steady mode before the growth of the temperature is completed. In this mode the thermal boundary layer at first grows in thickness, then contracts with increasing time. However, if the imposed wall temperature growth period is sufficiently short, the boundary layer develops differently. It is seen that the shape of many houses are isosceles triangular cross-section. The heat transfer process through the roof of the attic-shaped space should be well understood. Because, in the building energy, one of the most important objectives for design and construction of houses is to provide thermal comfort for occupants. Moreover, in the present energy-conscious society it is also a requirement for houses to be energy efficient, i.e. the energy consumption for heating or air-conditioning houses must be minimized.

Tracking the Brisbane residential property market : Post GFC

Prior to the GFC, Brisbane and Perth were experiencing the highest increases in median residential house prices, compared to the other major Australian cities, due to strong demand for both owner occupied and investment residential property. In both these cities, a major driver of this demand and subsequent increases in residential property prices was the strong resources sector. With the onset of the GFC in 2008, the resources and construction sectors in Queensland contracted significantly and this had both direct and indirect impacts on the Brisbane residential property market. However, this impact was not consistent across Brisbane residential property sectors. The affect on houses and units differed, as did the impact based on geographic location and suburb value. This paper tracks Brisbane residential property sales listings, sales and returns over the period February 2009 to July 2010 and provides an analysis of the residential market for 24 Brisbane suburbs. These suburbs cover main residential areas of Brisbane and are based on an equal number of low, medium and high socioeconomic areas of Brisbane. This assessment of socio-economic status for the suburbs is based on both median household income and median house price. The analysis will cover both free standing residential property and residential units/townhouses/villas. The results will show how each of these residential property sub markets have performed following the GFC.

Aerial image analysis using spiking neural networks with application to power line corridor monitoring

Trees, shrubs and other vegetation are of continued importance to the environment and our daily life. They provide shade around our roads and houses, offer a habitat for birds and wildlife, and absorb air pollutants. However, vegetation touching power lines is a risk to public safety and the environment, and one of the main causes of power supply problems. Vegetation management, which includes tree trimming and vegetation control, is a significant cost component of the maintenance of electrical infrastructure. For example, Ergon Energy, the Australia’s largest geographic footprint energy distributor, currently spends over $80 million a year inspecting and managing vegetation that encroach on power line assets. Currently, most vegetation management programs for distribution systems are calendar-based ground patrol. However, calendar-based inspection by linesman is labour-intensive, time consuming and expensive. It also results in some zones being trimmed more frequently than needed and others not cut often enough. Moreover, it’s seldom practicable to measure all the plants around power line corridors by field methods. Remote sensing data captured from airborne sensors has great potential in assisting vegetation management in power line corridors. This thesis presented a comprehensive study on using spiking neural networks in a specific image analysis application: power line corridor monitoring. Theoretically, the thesis focuses on a biologically inspired spiking cortical model: pulse coupled neural network (PCNN). The original PCNN model was simplified in order to better analyze the pulse dynamics and control the performance. Some new and effective algorithms were developed based on the proposed spiking cortical model for object detection, image segmentation and invariant feature extraction. The developed algorithms were evaluated in a number of experiments using real image data collected from our flight trails. The experimental results demonstrated the effectiveness and advantages of spiking neural networks in image processing tasks. Operationally, the knowledge gained from this research project offers a good reference to our industry partner (i.e. Ergon Energy) and other energy utilities who wants to improve their vegetation management activities. The novel approaches described in this thesis showed the potential of using the cutting edge sensor technologies and intelligent computing techniques in improve power line corridor monitoring. The lessons learnt from this project are also expected to increase the confidence of energy companies to move from traditional vegetation management strategy to a more automated, accurate and cost-effective solution using aerial remote sensing techniques.

Judge George W Paul's Japanese house : a case study

In the late 1880s a pre-fabricated Japanese house was shipped from Kobe, Japan, to Brisbane, Australia, and erected in the up-market suburb of New Farm by Japanese tradesmen. This paper is developed from a broader project researching the life of G W Paul, the man who had the house built and subsequently lived in it for the remainder of his life. Paul’s motivation in importing the house represented a unique, but unfulfilled effort to develop a future, hybrid culture for Queensland. This effort took the form of a commercial venture to construct Japanese houses as desirable and climatically suitable dwellings. Against the backdrop of this ambition, this paper presents new research to elucidate and extend previous knowledge, assesses the reception of the house by its nineteenth century Brisbane audience, and considers possible reasons for the limited response which signalled the cancellation of the commercial venture.

Integrating collaborative filtering and search-based techniques for personalized online product recommendation

The existing Collaborative Filtering (CF) technique that has been widely applied by e-commerce sites requires a large amount of ratings data to make meaningful recommendations. It is not directly applicable for recommending products that are not frequently purchased by users, such as cars and houses, as it is difficult to collect rating data for such products from the users. Many of the e-commerce sites for infrequently purchased products are still using basic search-based techniques whereby the products that match with the attributes given in the target user's query are retrieved and recommended to the user. However, search-based recommenders cannot provide personalized recommendations. For different users, the recommendations will be the same if they provide the same query regardless of any difference in their online navigation behaviour. This paper proposes to integrate collaborative filtering and search-based techniques to provide personalized recommendations for infrequently purchased products. Two different techniques are proposed, namely CFRRobin and CFAg Query. Instead of using the target user's query to search for products as normal search based systems do, the CFRRobin technique uses the products in which the target user's neighbours have shown interest as queries to retrieve relevant products, and then recommends to the target user a list of products by merging and ranking the returned products using the Round Robin method. The CFAg Query technique uses the products that the user's neighbours have shown interest in to derive an aggregated query, which is then used to retrieve products to recommend to the target user. Experiments conducted on a real e-commerce dataset show that both the proposed techniques CFRRobin and CFAg Query perform better than the standard Collaborative Filtering (CF) and the Basic Search (BS) approaches, which are widely applied by the current e-commerce applications. The CFRRobin and CFAg Query approaches also outperform the e- isting query expansion (QE) technique that was proposed for recommending infrequently purchased products.

Pollutant concentrations within households in Lao PDR and association with housing characteristics and occupants' activities

The paper presents the results of a study conducted to investigate indoor air quality within residential dwellings in Lao PDR. Results from PM 10, CO, and NO2 measurements inside 167 dwellings in Lao PDR over a five month period (December 2005-April 2006) are discussed as a function of household characteristics and occupant activities. Extremely high PM10 and NO2 concentrations (12 h mean PM10 concentrations 1275 ± 98 μg m-3 and 1183 ± 99 μg m-3 in Vientiane and Bolikhamxay provinces, respectively; 12 h mean NO2 concentrations 1210 ± 94 μg m-3 and 561 ± 45 μg m-3 in Vientiane and Bolikhamxay, respectively) were measured within the dwellings. Correlations, ANOVA analysis (univariate and multivariate), and linear regression results suggest a substantial contribution from cookingandsmoking.The PM10 concentrations were significantly higher in houses without a chimney compared to houses in which cooking occurred on a stove with a chimney. However, no significant differences in pollutantconcentrations were observed as a function of cooking location. Furthermore, PM10 and NO2 concentrations were higher in houses in which smoking occurred, suggestive of a relationship between increased indoor concentrations and smoking (0.05 < p < 0.10). Resuspension of dust from soil floors was another significant source of PM10 inside the house (634 μg m-3, p < 0.05).

Evaluation of an Australian solar community : implications for education and training

1.1 Background What is renewable energy education and training? A cursory exploration of the International Solar Energy Society website (www.ises.org) reveals numerous references to education and training, referring collectively to concepts of the transfer and exchange of information and good practices, awareness raising and skills development. The purposes of such education and training relate to changing policy, stimulating industry, improving quality control and promoting the wider use of renewable energy sources. The primary objective appears to be to accelerate a transition to a better world for everyone (ISEE), as the greater use of renewable energy is seen as key to climate recovery; world poverty alleviation; advances in energy security, access and equality; improved human and environmental health; and a stabilized society. The Solar Cities project – Habitats of Tomorrow – aims at promoting the greater use of renewable energy within the context of long term planning for sustainable urban development. The focus is on cities or communities as complete systems; each one a unique laboratory allowing for the study of urban sustainability within the context of a low carbon lifestyle. The purpose of this paper is to report on an evaluation of a Solar Community in Australia, focusing specifically on the implications (i) for our understandings and practices in renewable energy education and training and (ii) for sustainability outcomes. 1.2 Methodology The physical context is a residential Ecovillage (a Solar Community) in sub-tropical Queensland, Australia (latitude 28o south). An extensive Architectural and Landscape Code (A&LC) ‘premised on the interconnectedness of all things’ and embracing ‘both local and global concerns’ governs the design and construction of housing in the estate: all houses are constructed off-ground (i.e. on stumps or stilts) and incorporate a hybrid approach to the building envelope (mixed use of thermal mass and light-weight materials). Passive solar design, gas boosted solar water heaters and a minimum 1kWp photovoltaic system (grid connected) are all mandatory, whilst high energy use appliances such as air conditioners and clothes driers are not permitted. Eight families participated in an extended case study that encompassed both quantitative and qualitative approaches to better understand sustainable housing (perceived as a single complex technology) through its phases of design, construction and occupation. 1.3 Results The results revealed that the level of sustainability (i.e. the performance outcomes in terms of a low-carbon lifestyle) was impacted on by numerous ‘players’ in the supply chain, such as architects, engineers and subcontractors, the housing market, the developer, product manufacturers / suppliers / installers and regulators. Three key factors were complicit in the level of success: (i) systems thinking; (ii) informed decision making; and (iii) environmental ethics and business practices. 1.4 Discussion The experiences of these families bring into question our understandings and practices with regard to education and training. Whilst increasing and transferring knowledge and skills is essential, the results appear to indicate that there is a strong need for expanding our education efforts to incorporate foundational skills in complex systems and decision making processes, combined with an understanding of how our individual and collective values and beliefs impact on these systems and processes.

An integrated approach for precise road reconstruction from aerial imagery and LiDAR data

Accurate and detailed road models play an important role in a number of geospatial applications, such as infrastructure planning, traffic monitoring, and driver assistance systems. In this thesis, an integrated approach for the automatic extraction of precise road features from high resolution aerial images and LiDAR point clouds is presented. A framework of road information modeling has been proposed, for rural and urban scenarios respectively, and an integrated system has been developed to deal with road feature extraction using image and LiDAR analysis. For road extraction in rural regions, a hierarchical image analysis is first performed to maximize the exploitation of road characteristics in different resolutions. The rough locations and directions of roads are provided by the road centerlines detected in low resolution images, both of which can be further employed to facilitate the road information generation in high resolution images. The histogram thresholding method is then chosen to classify road details in high resolution images, where color space transformation is used for data preparation. After the road surface detection, anisotropic Gaussian and Gabor filters are employed to enhance road pavement markings while constraining other ground objects, such as vegetation and houses. Afterwards, pavement markings are obtained from the filtered image using the Otsu's clustering method. The final road model is generated by superimposing the lane markings on the road surfaces, where the digital terrain model (DTM) produced by LiDAR data can also be combined to obtain the 3D road model. As the extraction of roads in urban areas is greatly affected by buildings, shadows, vehicles, and parking lots, we combine high resolution aerial images and dense LiDAR data to fully exploit the precise spectral and horizontal spatial resolution of aerial images and the accurate vertical information provided by airborne LiDAR. Objectoriented image analysis methods are employed to process the feature classiffcation and road detection in aerial images. In this process, we first utilize an adaptive mean shift (MS) segmentation algorithm to segment the original images into meaningful object-oriented clusters. Then the support vector machine (SVM) algorithm is further applied on the MS segmented image to extract road objects. Road surface detected in LiDAR intensity images is taken as a mask to remove the effects of shadows and trees. In addition, normalized DSM (nDSM) obtained from LiDAR is employed to filter out other above-ground objects, such as buildings and vehicles. The proposed road extraction approaches are tested using rural and urban datasets respectively. The rural road extraction method is performed using pan-sharpened aerial images of the Bruce Highway, Gympie, Queensland. The road extraction algorithm for urban regions is tested using the datasets of Bundaberg, which combine aerial imagery and LiDAR data. Quantitative evaluation of the extracted road information for both datasets has been carried out. The experiments and the evaluation results using Gympie datasets show that more than 96% of the road surfaces and over 90% of the lane markings are accurately reconstructed, and the false alarm rates for road surfaces and lane markings are below 3% and 2% respectively. For the urban test sites of Bundaberg, more than 93% of the road surface is correctly reconstructed, and the mis-detection rate is below 10%.

Characterisation and source identification of selected pollutants in house dust

House dust is a heterogeneous matrix, which contains a number of biological materials and particulate matter gathered from several sources. It is the accumulation of a number of semi-volatile and non-volatile contaminants. The contaminants are trapped and preserved. Therefore, house dust can be viewed as an archive of both the indoor and outdoor air pollution. There is evidence to show that on average, people tend to stay indoors most of the time and this increases exposure to house dust. The aims of this investigation were to: " assess the levels of Polycyclic Aromatic Hydrocarbons (PAHs), elements and pesticides in the indoor environment of the Brisbane area; " identify and characterise the possible sources of elemental constituents (inorganic elements), PAHs and pesticides by means of Positive Matrix Factorisation (PMF); and " establish the correlations between the levels of indoor air pollutants (PAHs, elements and pesticides) with the external and internal characteristics or attributes of the buildings and indoor activities by means of multivariate data analysis techniques. The dust samples were collected during the period of 2005-2007 from homes located in different suburbs of Brisbane, Ipswich and Toowoomba, in South East Queensland, Australia. A vacuum cleaner fitted with a paper bag was used as a sampler for collecting the house dust. A survey questionnaire was filled by the house residents which contained information about the indoor and outdoor characteristics of their residences. House dust samples were analysed for three different pollutants: Pesticides, Elements and PAHs. The analyses were carried-out for samples of particle size less than 250 µm. The chemical analyses for both pesticides and PAHs were performed using a Gas Chromatography Mass Spectrometry (GC-MS), while elemental analysis was carried-out by using Inductively-Coupled Plasma-Mass Spectroscopy (ICP-MS). The data was subjected to multivariate data analysis techniques such as multi-criteria decision-making procedures, Preference Ranking Organisation Method for Enrichment Evaluations (PROMETHEE), coupled with Geometrical Analysis for Interactive Aid (GAIA) in order to rank the samples and to examine data display. This study showed that compared to the results from previous works, which were carried-out in Australia and overseas, the concentrations of pollutants in house dusts in Brisbane and the surrounding areas were relatively very high. The results of this work also showed significant correlations between some of the physical parameters (types of building material, floor level, distance from industrial areas and major road, and smoking) and the concentrations of pollutants. Types of building materials and the age of houses were found to be two of the primary factors that affect the concentrations of pesticides and elements in house dust. The concentrations of these two types of pollutant appear to be higher in old houses (timber houses) than in the brick ones. In contrast, the concentrations of PAHs were noticed to be higher in brick houses than in the timber ones. Other factors such as floor level, and distance from the main street and industrial area, also affected the concentrations of pollutants in the house dust samples. To apportion the sources and to understand mechanisms of pollutants, Positive Matrix Factorisation (PMF) receptor model was applied. The results showed that there were significant correlations between the degree of concentration of contaminants in house dust and the physical characteristics of houses, such as the age and the type of the house, the distance from the main road and industrial areas, and smoking. Sources of pollutants were identified. For PAHs, the sources were cooking activities, vehicle emissions, smoking, oil fumes, natural gas combustion and traces of diesel exhaust emissions; for pesticides the sources were application of pesticides for controlling termites in buildings and fences, treating indoor furniture and in gardens for controlling pests attacking horticultural and ornamental plants; for elements the sources were soil, cooking, smoking, paints, pesticides, combustion of motor fuels, residual fuel oil, motor vehicle emissions, wearing down of brake linings and industrial activities.

Rebuilding housing after a disaster : factors for failure

Disasters, particularly those triggered by nature are often followed by a swift humanitarian relief response to address the resultant emergencies. These efforts are then transitioned through the medium recovery stage, eventually aimed at providing a long term post-disaster reconstruction solution. Emergency humanitarian relief focuses on responding to the immediate need for restoration of basic services, medical treatment and medical supplies, food and temporary shelter, and is a short term strenuous effort. Reconstruction of permanent houses, on the other hand, is a continuous process that often requires decades of effort to return a community to normality. Whilst emergency relief is generally perceived to be very effective, post-disaster housing reconstruction projects often fail to meet their set objectives. This paper outlines and discusses factors that contribute to the failure of post-disaster housing reconstruction projects and the subsequent immediate and long term negative impacts of failure on project outcomes.

Natural convection in the attic-shaped spaces

Heat transfer through an attic space into or out of buildings is an important issue for attic-shaped houses in both hot and cold climates. One of the important objectives for design and construction of houses is to provide thermal comfort for occupants. In the present energy-conscious society, it is also a requirement for houses to be energy efficient, i.e. the energy consumption for heating or air-conditioning houses must be minimized. Relevant to these objectives, research into heat transfer in attics has been conducted for about three decades. The transient behaviour of an attic space is directly relevant to our daily life. Certain periods of the day or night may be considered as having a constant ambient temperature (e.g. during 11am - 2pm or 11pm - 2am). However, at other times during the day or night the ambient temperature changes with time (e.g. between 5am - 9am or 5pm - 9pm). Therefore, the analysis of steady state solution is not sufficient to describe the fluid flow and heat transfer in the attic space. The discussion of the transient development of the boundary is required. A theoretical understanding of the transient behaviour of the flow in the enclosure is performed through scaling analysis for sudden and ramp heating conditions. A proper identification of the timescales, the velocity and the thickness relevant to the flow that develops inside the cavity makes it possible to predict theoretically the basic flow features that will survive once the thermal flow in the enclosure reaches a steady state. Those scaling predictions have been verified by a series of numerical simulations.

Cyclic imides and an open-chain amide carboxylic acid from the facile reaction of cis-cyclohexane-1,2-dicarboxylic anhydride with the isomeric monofluoroanilines

The structures of the cyclic imides cis-2-(2-fluorophenyl)-3a,4,5,6,7,7a-hexahydroisoindole-1,3-dione, C14H14FNO2, (I), and cis-2-(4-fluorophenyl)-3a,4,5,6,7,7a-hexahydroisoindoline-1,3-dione, C14H14FNO2, (III), and the open-chain amide acid rac-cis-2-[(3-fluorophenyl)carbamoyl]cyclohexane-1-carboxylic acid, C14H16FNO3, (II), are reported. Cyclic imides (I) and (III) are conformationally similar, with comparable ring rotations about the imide N-Car bond [the dihedral angles between the benzene ring and the five-membered isoindole ring are 55.40 (8)° for (I) and 51.83 (7)° for (III)]. There are no formal intermolecular hydrogen bonds involved in the crystal packing of either (I) or (III). With the acid (II), in which the meta-related F-atom substituent is rotationally disordered (0.784:0.216), the amide group lies slightly out of the benzene plane [the interplanar dihedral angle is 39.7 (1)°]. Intermolecular amide-carboxyl N-HO hydrogen-bonding interactions between centrosymmetrically related molecules form stacks extending down b, and these are linked across c by carboxyl-amide O-HO hydrogen bonds, giving two-dimensional layered structures which lie in the (011) plane. The structures reported here represent examples of compounds analogous to the phthalimides or phthalanilic acids and have little precedence in the crystallographic literature.

Composing maternal identities : the living realities of mothers with young adult-children in twenty-first century Australia

There is an abundance of books available on the topic of motherhood and mothering; the majority of these books focus on the vulnerability of babies and young children and the motherwork such vulnerability demands. In particular they focus on what it is right to do in the interests of the child, and particularly his or her growth and development. Such a focus is consistent in Western culture with modern moral frameworks where understandings of goodness have been assimilated to dimensions of human action rather than dimensions of human being, selfhood, or specific forms of life. As Charles Taylor has observed, much modern moral philosophy has focused =on what it is right to do rather than the nature of the good life‘ (1989, 13). The master narratives of motherhood and the prevailing social discourses of intensive1 and sacrificial2 mothering exemplify this view as such narratives and discourses depict =what mothers are expected to do [and] how mothers are supposed to be‘ (Nelson 2001, 140). From such infant/child-focused accounts a canonical maternal identity can be discerned; arguably, it is a restricted one. The majority of these books fail to address questions related to what it means be a mother in particular situated, existing, living realities. For instance, ask a mother with young children what being a mother means to her and she may speak of the challenges she faces balancing paid employment and her role as a mother, or the impact of the demands being made on her time and energy. However, ask a mother with young adult-children3 what being a mother means to her and she may speak in similar tones, but she may also speak in differing tones. For example, a "mature" mother may speak of the "empty nest", the "crowded house" and/or "its revolving front door". She may speak of issues related to the vulnerability of the long term marriage, elder care, or grandparenting, or even disillusionment and disenchantment. The purpose of this research is to explore the identity challenges and prospects of some mothers with young adult-children aged between 18 and 30 years of age in twenty-first century Australia. In interpreting the identity challenges and prospects this particular cohort of mothers encounter in their ordinary, everyday living, a diverse and particular range of maternal experiences.my own included5.have been traced, along with the social and ethical meanings ascribed in them. With an understanding and appreciation of voice as the medium which connects one's inner and outer worlds, this research illuminates the plurality of voices and the multiple layers of meaning in each of these mother's particular living and existing realities. Specifically, this research addresses the narrowly constructed, canonical maternal identity through a critical exploration and reflection on stories, shared in a research context, of the living realities of a group of self-identified "mature", middle-class, Australian mothers with children aged between 18 and 30 years of age6. By appraising the broader familial, historical, social, cultural, institutional, and, importantly, moral contexts in which these mothers are situated, 'thick descriptions' (Geertz 1973, 27)7 of maternal identities, and the challenges and prospects these mothers are negotiating, are provided. In terms of its ethical orientation, the frameworks which support and frame this research reject, repudiate and contest (Nelson 2001) the reduction of ethical concerns to individual or intellectual problems or dilemmas to be solved through the application of a theory derived from reasoned thinking. In dismissing deductive and =theoretical-juridical‘8 approaches, the individualistic orientation entrenched in contemporary Western moral thinking, expressed in the notion of '"what ought I to do" when faced with a problem, issue or dilemma of practical urgency' (Isaacs & Massey 1994, 1), is simultaneously rejected, repudiated and contested (Nelson 2001). In countering such understandings, this research reorients us to the illumination and articulation of who it is good to be, for each of these mothers, in allegiance with those goods which guide and inspire her orientations towards living a good life—a life which embraces and enhances the flourishing of herself and her significant others. With an understanding and appreciation that 'mind is never free of precommitment[—t]here is no innocent eye, nor is there one that penetrates aboriginal reality' (Bruner 1987, 32), this thesis is written with the voices of other interlocutors9. These interlocutors include the voices of my research participants whom I refer to as "research interlocutors", my textual "friends" — those scholars whose work resonates strongly with my orientations—as well as the myriad other voices that speak to mothers, for mothers and about mothers, such as those found in popular and mainstream press and culture. Sometimes these voices resonate; other times dissonance may be heard. In situating this research within these complementary frameworks, this research invites readers to join with me in considering, appreciating and appraising the narrow construction of maternal identity. I seek for this engagement, like the engagements with my research interlocutors, to be 'a meeting of voices, an authentic dialogue that is inclusive of the voices of all concerned participants' (Isaacs 2001, 6). I hope that the voices in this thesis resonate with yours (although, at times, you may feel some dissonance) and that together we can draw closer to the accounting, re-counting and re-stor(y)ing of maternal identities; like concentric circles of witness, the dialogue, ...will thus be expanded rippling into corners where one might both imagine, and least expect. Possibilities, then, are vast; the future exciting (Smith 2007, 397). This research is also shaped and guided by maternal scholarship, a relatively new field of inquiry known as 'motherhood studies' (O'Reilly 2011, xvii) which has its origins within the broader terrain of feminist scholarship. As a work of maternal scholarship, this thesis draws upon and continues the tradition of examining motherhood as it is experienced 'in a social context, as embedded in a political institution: in feminist terms' (Rich 1995, ix). It values mothers, their experiences, their stories, their lives. As such, this research is oriented towards 'matricentric feminism', a particular form of feminist inquiry, politics and theory which is consistent with and receptive to feminist frameworks of care and equal rights (O‘Reilly 2011, 25). A number of complementary conceptual frameworks have been engaged in this research with the thesis presented in three parts: the pre-figurative, configurative and re-configurative. As my particular living experiences provided the initial motivation for this research, an account of the challenges I experienced as a mother with young adult-children are outlined as a Prelude to this thesis. Attention then turns to Part One – Pre-figuring Maternal Identities in which the contextual, conceptual and methodological foundations underpinning this research are explored and outlined. In Chapter One, the prevailing cultural narratives and social discourses supporting and shaping the construction of the canonical maternal identity are outlined. Next, in setting the scholarly context, the critiques — arising from feminist and maternal scholarship — of motherhood as a patriarchal institution, mothering as experience, and mothering as work, are explored. As this research engaged with participants who are embedded in particular middle-class, heterosexual, familial and cultural structures, an exploration of family life cycle theory and main stream media accounts are also incorporated. The terrain in which "mature" mothering within an Australian context is experienced is also outlined, including the notions of "empty nests" and "crowded houses", grandparenting, elder care and women's midlife transition. Chapter Two gives an account of the conceptual ontological, ethical, identity and narrative frameworks underpinning this research. In setting the context for rich interpretations, the characteristics of being human10 are outlined before attention turns to our embodiment and embeddedness in our shared human condition11. From this point, attention then turns to understanding the moral form of human living12. In appreciating the vulnerability inherent in our shared human condition, the ways in which we may experience trouble in our lives is noted. The framing of identity constitution13 as complex, multi-faceted, relationally negotiated and composed is then outlined, followed by an understanding of why narrative is a valuable interpretive tool for interpreting and understanding human experiences. This chapter concludes with an appreciation of the ethical significance of storytelling. The research methodology is then outlined in Chapter Three. The rationale underpinning the adoption of the narrative interviewing technique of in-depth interviewing is explored. In exploring these methodological frameworks, the recruitment and interview processes involved in gathering and interpreting the recorded transcripts of ten Australian mothers with young adult-children are outlined. The method of analysis known as the Listening Guide14 best complements the multi-layered, pluri-vocal nature of narrative accounting. The final section of Chapter Three outlines The Guide, with one mother's recorded transcript used to illustrate this method's step-by-step process. Having gathered an understanding and appreciation of the pluri-vocal, multi-layered nature of narrative and identity constitution, the tone of this thesis changes in Part Two . Configuring Maternal Identities. This section consists of Chapters Four and Five and seeks to find meaning in, and make sense of, the differences and commonalities across these particular accounts. Chapter Four explores the living realities of four Australian mothers with young adult-children: Poppy, Honey, Lily and Heather. In presenting a thick description of these mothers' situated realities, the frameworks.the familial, social, cultural, historical and institutional backgrounds.which have supported and shaped each mother's experiences are illuminated. Simultaneously revealed through these particular accounts are the plurality of goods focusing and moving each mother to the moral form of life, a life of meaning and purpose. The harms challenging some mothers' moral motivations are also revealed in this chapter. Specifically illustrated in Chapter Four are the unique and qualitative differences of particular maternal identity configurations. Chapter Five reveals the commonalities amongst all of the research interlocutors' accounts. This chapter contests the individualistic orientation of many contemporary accounts of motherhood which are aimed at defining or contesting what a "good" mother ought to do. By turning away from such individualistic orientations, the chapter does not seek to define 'the content of obligation' (Taylor 1989, 3) but rather seeks to illuminate and articulate a richer, deeper understanding and appreciation of maternal be-ing and be-coming - that is, who it is good to be, for each of these mothers - in allegiance with those goods that focus and inspire her moral motivations. Part Three - Re-Configuring Maternal Identities, which is comprised of Chapter Six, draws this thesis to a close. In this final chapter, the preconceptions, conditions and aspirations for this mother-centred account of the living realities of a small, local cohort of mothers are reiterated. The insights gathered from the rich, descriptive accounts are illuminated and articulated, and the chapter closes with some suggestions for future research. In a Postlude, I reflect on how this research has been a transformative learning experience in my own life.an experience in which I have been able to not only deeply understand and appreciate the challenges and disorientation I was experiencing but also to identify and reorient my stance in relation to the good. In a practical sense, by offering thick descriptions of the living realities of this cohort of "mature" mothers, this research challenges the canonical maternal identity and questions its relevance for, and effect on, "mature" mothers' identity constitution. By bringing to light the complex existing realities of these particular mothers, this research critiques the canonical maternal identity by illustrating that each mother's life and her identity constitutions are complex, relationally negotiated and composed and that motherhood is an enduring way of being. Through these illustrations, this research engages with and extends understandings of difference feminism. This research, however, not only rejects, repudiates and contests (Nelson 2001) the narrowly defined canonical maternal identity. By illuminating and articulating the goods which shape and inspire these "mature" mothers' motherwork, this research offers a matricentric account which is consistent with and respectful of the particular, situated realities—the broader familial, social, institutional, but most importantly, moral values and frameworks—in which each mother‘s life is embedded and her motherwork oriented. By understanding and appreciating the complex and multiple webs of relationships in which each mother exists, this matricentric re-stor(y)ing of maternal experiences not only understands and appreciates the unique nature of each mother‘s existing realities, it is oriented to the continuing enhancing of the shared pursuit of the good which underpins particular maternal practices and particular maternal ways of being.

Hydrogen-bonding in cyclic imides and amide carboxylic acid derivatives from the facile reaction of cis-cyclohexane-1,2-carboxylic anhydride with o- and p-anisidine and m- and p-aminobenzoic acids

The structures of the open chain amide carboxylic acid rac-cis-[2-(2-methoxyphenyl)carbamoyl]cyclohexane-1-carboxylic acid, C15H19NO4, (I) and the cyclic imides rac-cis-2-(4-methoxyphenyl)-3a,4,5,6,7,7-hexahydroisoindole-1,3-dione,C15H17NO3, (II), chiral cis-2-(3-carboxyphenyl)-3a,4,5,6,7,7a-hexahydroisoindole-1,3-dione, C15H15NO4,(III) and rac-cis-2-(4-carboxyphenyl)- 3a,4,5,6,7,7a-hexahydroisoindole-1,3-dione monohydrate, C15H15NO4. H2O) (IV), are reported. In the amide acid (I), the phenylcarbamoyl group is essentially planar [maximum deviation from the least-squares plane = 0.060(1)Ang. for the amide O atom], the molecules form discrete centrosymmetric dimers through intermolecular cyclic carboxy-carboxy O-H...O hydrogen-bonding interactions [graph set notation R2/2(8)]. The cyclic imides (II)--(IV) are conformationally similar, with comparable phenyl ring rotations about the imide N-C(aromatic) bond [dihedral angles between the benzene and isoindole rings = 51.55(7)deg. in (II), 59.22(12)deg. in (III) and 51.99(14)deg. in (IV). Unlike (II) in which only weak intermolecular C-H...O(imide) hydrogen bonding is present, the crystal packing of imides (III) and (IV) shows strong intermolecular carboxylic acid O-H...O hydrogen-bonding associations. With (III), these involve imide O-atom acceptors, giving one-dimensional zigzag chains [graph set C(9)], while with the monohydrate (IV), the hydrogen bond involves the partially disordered water molecule which also bridges molecules through both imide and carboxyl O-atom acceptors in a cyclic R4/4(12) association, giving a two-dimensional sheet structure. The structures reported here expand the structural data base for compounds of this series formed from the facile reaction of cis-cyclohexane-1,2-dicarboxylic anhydride with substituted anilines, in which there is a much larger incidence of cyclic imides compared to amide carboxylic acids.

From slum to suburbia : examining a spectrum of planned and unplanned urban morphology in humid sub-tropical regions of the world

The current rapid urban growth throughout the world manifests in various ways and historically cities have grown, similarly, alternately or simultaneously between planned extensions and organic informal settlements (Mumford, 1989). Within cities different urban morphological regions can reveal different contexts of economic growth and/or periods of dramatic social/technological change (Whitehand, 2001, 105). Morpho-typological study of alternate contexts can present alternative models and contribute to the present discourse which questions traditional paradigms of urban planning and design (Todes et al, 2010). In this study a series of cities are examined as a preliminary exploration into the urban morphology of cities in ‘humid subtropical’ climates. From an initial set of twenty, six cities were selected: Sao Paulo, Brazil; Jacksonville, USA; Maputo, Mozambique; Kanpur, India; Hong Kong, China; and Brisbane, Australia. The urban form was analysed from satellite imagery at a constant scale. Urban morphological regions (types) were identified as those demonstrating particular consistant characteristics of form (density, typology and pattern) different to their surroundings when examined at a constant scale. This analysis was correlated against existing data and literature discussing the proliferation of two types of urban development, ‘informal settlement’ (defined here as self-organised communities identifiable but not always synonymous with ‘slums’) and ‘suburbia’ (defined here as master planned communities of generally detached houses prevalent in western society) - the extreme ends of a hypothetical spectrum from ‘planned’ to ‘spontaneous’ urban development. Preliminary results show some cities contain a wide variety of urban form ranging from the highly organic ‘self-organised’ type to the highly planned ‘master planned community’ (in the case of Sao Paulo) while others tend to fall at one end of the planning spectrum or the other (more planned in the cases of Brisbane and Jacksonville; and both highly planned and highly organic in the case of Maputo). Further research will examine the social, economical and political drivers and controls which lead to this diversity or homogeneity of urban form and speculates on the role of self-organisation as a process for the adaptation of urban form.