Multiculturalism, education for sustainable development (ESD) and the shifting discursive landscape of social inclusion

Australia has a long and sometimes turbulent relationship with the migrant Other. This paper examines a component of this relationship via the window of contemporary multicultural policy. The paper begins with an analysis of the political and social conditions that enabled a national and bipartisan policy of multiculturalism to emerge as formalised federal policy during the late 1960s and early 1970s. The paper re-problematises the influences that helped shape Australia's articulation of race and ethnicity and argues that multiculturalism, within a post-September 11 environment, can no longer be framed solely within its traditional framework of social justice. The paper positions education for sustainable development (ESD) as an emerging discursive field that provides educators with an alternative road map for critiquing Australia's fluid relationship with the migrant Other. By linking the tenets of multiculturalism with ESD, this paper suggests pre-service teacher educators are presented with a productive, and at the same time politically palatable, means for regaining pedagogical traction for a semi-dormant agenda of social inclusion.

Path planning using surface shape and ground properties

This paper presents a path planning technique for ground vehicles that accounts for the dynamics of the vehicle, the topography of the terrain and the wheel/ground interaction properties such as friction. The first two properties can be estimated using well known sensors and techniques, but the third is not often estimated even though it has a significant effect on the motion of a high-speed vehicle. We introduce a technique which allows the estimation of wheel slip from which frictional parameters can be inferred. We present simulation results which show the importance of modelling topography and ground properties and experimental results which show how ground properties can be estimated along a 350m outdoor traverse.

Train control to reduce delays upon service disturbances at railway junctions

Train delay is one of the most important indexes to evaluate the service quality of the railway. Because of the interactions of movement among trains, a delayed train may conflict with trains scheduled on other lines at junction area. Train that loses conflict may be forced to stop or slow down because of restrictive signals, which consequently leads to the loss of run-time and probably enlarges more delays. This paper proposes a time-saving train control method to recover delays as soon as possible. In the proposed method, golden section search is adopted to identify the optimal train speed at the expected time of restrictive signal aspect upgrades, which enables the train to depart from the conflicting area as soon as possible. A heuristic method is then developed to attain the advisory train speed profile assisting drivers in train control. Simulation study indicates that the proposed method enables the train to recover delays as soon as possible in case of disturbances at railway junctions, in comparison with the traditional maximum traction strategy and the green wave strategy.

Evaluation of an Australian solar community : implications for education and training

1.1 Background What is renewable energy education and training? A cursory exploration of the International Solar Energy Society website (www.ises.org) reveals numerous references to education and training, referring collectively to concepts of the transfer and exchange of information and good practices, awareness raising and skills development. The purposes of such education and training relate to changing policy, stimulating industry, improving quality control and promoting the wider use of renewable energy sources. The primary objective appears to be to accelerate a transition to a better world for everyone (ISEE), as the greater use of renewable energy is seen as key to climate recovery; world poverty alleviation; advances in energy security, access and equality; improved human and environmental health; and a stabilized society. The Solar Cities project – Habitats of Tomorrow – aims at promoting the greater use of renewable energy within the context of long term planning for sustainable urban development. The focus is on cities or communities as complete systems; each one a unique laboratory allowing for the study of urban sustainability within the context of a low carbon lifestyle. The purpose of this paper is to report on an evaluation of a Solar Community in Australia, focusing specifically on the implications (i) for our understandings and practices in renewable energy education and training and (ii) for sustainability outcomes. 1.2 Methodology The physical context is a residential Ecovillage (a Solar Community) in sub-tropical Queensland, Australia (latitude 28o south). An extensive Architectural and Landscape Code (A&LC) ‘premised on the interconnectedness of all things’ and embracing ‘both local and global concerns’ governs the design and construction of housing in the estate: all houses are constructed off-ground (i.e. on stumps or stilts) and incorporate a hybrid approach to the building envelope (mixed use of thermal mass and light-weight materials). Passive solar design, gas boosted solar water heaters and a minimum 1kWp photovoltaic system (grid connected) are all mandatory, whilst high energy use appliances such as air conditioners and clothes driers are not permitted. Eight families participated in an extended case study that encompassed both quantitative and qualitative approaches to better understand sustainable housing (perceived as a single complex technology) through its phases of design, construction and occupation. 1.3 Results The results revealed that the level of sustainability (i.e. the performance outcomes in terms of a low-carbon lifestyle) was impacted on by numerous ‘players’ in the supply chain, such as architects, engineers and subcontractors, the housing market, the developer, product manufacturers / suppliers / installers and regulators. Three key factors were complicit in the level of success: (i) systems thinking; (ii) informed decision making; and (iii) environmental ethics and business practices. 1.4 Discussion The experiences of these families bring into question our understandings and practices with regard to education and training. Whilst increasing and transferring knowledge and skills is essential, the results appear to indicate that there is a strong need for expanding our education efforts to incorporate foundational skills in complex systems and decision making processes, combined with an understanding of how our individual and collective values and beliefs impact on these systems and processes.

Green buildings for greying people : a case study of a retirement village in Australia

Purpose With an increasingly ageing population and widespread acceptance of the need for sustainable development in Australia, the demand for green retirement villages is increasing. This paper aims to identify the critical issues to be considered by developers and practitioners when embarking on their first green residential retirement project in Australia. Design/methodology/approach In view of the lack of adequate historical data for quantitative analysis, a case study approach is employed to examine the successful delivery of green retirement villages. Face-to-face interviews and document analysis were conducted for data collection. Findings The findings of the study indicate that one of the major obstacles to the provision of affordable green retirement villages is the higher initial costs involved. However, positive aspects were identified, the most significant of which relate to: the innovative design of site and floor plans; adoption of thermally efficient building materials; orientation of windows; installation of water harvesting and recycling systems, water conservation fittings and appliances; and waste management during the construction stage. With the adoption of these measures, it is believed that sustainable retirement development can be achieved without significant additional capital costs. Practical implications The research findings serve as a guide for developers in decision making throughout the project life-cycle when introducing green features into the provision of affordable retirement accommodation. Originality/value This paper provides insights into the means by which affordable green residential retirement projects for aged people can be successfully completed.

Creative industries after the first decade of debate

It has now been over a decade since the concept of creative industries was first put into the public domain by the Blair Labour government’s Creative Industries Mapping Documents in Britain. The concept has gained traction globally, but it has also been understood and developed in different ways in Europe, Asia, Australia, New Zealand, and North America, as well as through international bodies such as UNCTAD and UNESCO. A review of the policy literature reveals that although questions and issues remain around definitional coherence, there is some degree of consensus emerging about the size, scope, and significance of the sectors in question in both advanced and developing economies. At the same time, debate about the concept remains highly animated in media, communication, and cultural studies, with its critics dismissing the concept outright as a harbinger of neoliberal ideology in the cultural sphere. This article couches such critiques in light of recent debates surrounding the intellectual coherence of the concept of neoliberalism, arguing that this term itself possesses problems when taken outside of the Anglo-American context in which it originated. It is argued that issues surrounding the nature of participatory media culture, the relationship between cultural production and economic innovation, and the future role of public cultural institutions can be developed from within a creative industries framework and that writing off such arguments as a priori ideological and flawed does little to advance debates about twentieth-century information and media culture.

Numerical solution of stress intensity factors of multiple cracks in great number with eigen COD boundary integral equations

Based on the eigen crack opening displacement (COD) boundary integral equations, a newly developed computational approach is proposed for the analysis of multiple crack problems. The eigen COD particularly refers to a crack in an infinite domain under fictitious traction acting on the crack surface. With the concept of eigen COD, the multiple cracks in great number can be solved by using the conventional displacement discontinuity boundary integral equations in an iterative fashion with a small size of system matrix. The interactions among cracks are dealt with by two parts according to the distances of cracks to the current crack. The strong effects of cracks in adjacent group are treated with the aid of the local Eshelby matrix derived from the traction BIEs in discrete form. While the relatively week effects of cracks in far-field group are treated in the iteration procedures. Numerical examples are provided for the stress intensity factors of multiple cracks, up to several thousands in number, with the proposed approach. By comparing with the analytical solutions in the literature as well as solutions of the dual boundary integral equations, the effectiveness and the efficiencies of the proposed approach are verified.

Social innovation and social enterprise : evidence from Australia

‘Social innovation’ is a construct increasingly used to explain the practices, processes and actors through which sustained positive transformation occurs in the network society (Mulgan, G., Tucker, S., Ali, R., Sander, B. (2007). Social innovation: What it is, why it matters and how can it be accelerated. Oxford:Skoll Centre for Social Entrepreneurship; Phills, J. A., Deiglmeier, K., & Miller, D. T. Stanford Social Innovation Review, 6(4):34–43, 2008.). Social innovation has been defined as a “novel solution to a social problem that is more effective, efficient, sustainable, or just than existing solutions, and for which the value created accrues primarily to society as a whole rather than private individuals.” (Phills,J. A., Deiglmeier, K., & Miller, D. T. Stanford Social Innovation Review, 6 (4):34–43, 2008: 34.) Emergent ideas of social innovation challenge some traditional understandings of the nature and role of the Third Sector, as well as shining a light on those enterprises within the social economy that configure resources in novel ways. In this context, social enterprises – which provide a social or community benefit and trade to fulfil their mission – have attracted considerable policy attention as one source of social innovation within a wider field of action (see Leadbeater, C. (2007). ‘Social enterprise and social innovation: Strategies for the next 10 years’, Cabinet office,Office of the third sector http://www.charlesleadbeater.net/cms xstandard/social_enterprise_innovation.pdf. Last accessed 19/5/2011.). And yet, while social enterprise seems to have gained some symbolic traction in society, there is to date relatively limited evidence of its real world impacts.(Dart, R. Not for Profit Management and Leadership, 14(4):411–424, 2004.) In other words, we do not know much about the social innovation capabilities and effects of social enterprise. In this chapter, we consider the social innovation practices of social enterprise, drawing on Mulgan, G., Tucker, S., Ali, R., Sander, B. (2007). Social innovation: What it is, why it matters and how can it be accelerated. Oxford: Skoll Centre for Social Entrepreneurship: 5) three dimensions of social innovation: new combinations or hybrids of existing elements; cutting across organisational, sectoral and disciplinary boundaries; and leaving behind compelling new relationships. Based on a detailed survey of 365 Australian social enterprises, we examine their self-reported business and mission-related innovations, the ways in which they configure and access resources and the practices through which they diffuse innovation in support of their mission. We then consider how these findings inform our understanding of the social innovation capabilities and effects of social enterprise,and their implications for public policy development.

Influencing innovation in SME’s : from designer to transitional engineer

The following paper presents insights found during an ongoing industry engagement with a family-owned manufacturing SME in Australia. The study seeks to unpack cultural, strategic, product opportunities and challenges available to the firm engaging in a design led approach to innovation. Design led innovation finds new market opportunities to innovate through a holistic perspective of both the internal business operations, focusing on the customer experience and external stakeholders. The action research based methodology consisted of 25 semi-structured interviews, a reflective journal and focus group, all of which were analysed thematically. This paper focuses on the resultant themes of the focus group data constituting a discussion around the best strategies to try and integrate design thinking as a fundamental skill across the company. The main thematic results included the participant’s limited views of themselves (in current roles) as being to create ‘buy-in’ to change initiatives, a preference to act as a group to gain traction in the firm, importance of better defining the problem before reaching a design solution and lastly the time required to implement versus the need for change. These findings are valuable in assisting other family owned firms in managing core growth activities with design and innovation initiatives, particularly in the area of new product development.

Efficient solution of multiple cracks in great number using eigen COD boundary integral equations with iteration procedure

A newly developed computational approach is proposed in the paper for the analysis of multiple crack problems based on the eigen crack opening displacement (COD) boundary integral equations. The eigen COD particularly refers to a crack in an infinite domain under fictitious traction acting on the crack surface. With the concept of eigen COD, the multiple cracks in great number can be solved by using the conventional displacement discontinuity boundary integral equations in an iterative fashion with a small size of system matrix to determine all the unknown CODs step by step. To deal with the interactions among cracks for multiple crack problems, all cracks in the problem are divided into two groups, namely the adjacent group and the far-field group, according to the distance to the current crack in consideration. The adjacent group contains cracks with relatively small distances but strong effects to the current crack, while the others, the cracks of far-field group are composed of those with relatively large distances. Correspondingly, the eigen COD of the current crack is computed in two parts. The first part is computed by using the fictitious tractions of adjacent cracks via the local Eshelby matrix derived from the traction boundary integral equations in discretized form, while the second part is computed by using those of far-field cracks so that the high computational efficiency can be achieved in the proposed approach. The numerical results of the proposed approach are compared not only with those using the dual boundary integral equations (D-BIE) and the BIE with numerical Green's functions (NGF) but also with those of the analytical solutions in literature. The effectiveness and the efficiency of the proposed approach is verified. Numerical examples are provided for the stress intensity factors of cracks, up to several thousands in number, in both the finite and infinite plates.

Non-contact ACL injuries : association with clegg soil impact test values for sports fields, soil moisture and prevailing weather

Introduction: There is a recognised relationship between dry weather conditions and increased risk of anterior cruciate ligament (ACL) injury. Previous studies have identified 28 day evaporation as an important weather-based predictor of non-contact ACL injuries in professional Australian Football League matches. The mechanism of non-contact injury to the ACL is believed to increased traction and impact forces between footwear and playing surface. Ground hardness and the amount and quality of grass are factors that would most likely influence this and are inturn, related to the soil moisture content and prevailing weather conditions. This paper explores the relationship between soil moisture content, preceding weather conditions and the Clegg Soil Impact Test (CSIT) which is an internationally recognised standard measure of ground hardness for sports fields. Methodology: The 2.25 kg Clegg Soil Impact Test and a pair of 12 cm soil moisture probes were used to measure ground hardness and percentage moisture content. Five football fields were surveyed at 13 prescribed sites just before seven football matches from October 2008 to January 2009 (an FC Women’s WLeague team). Weather conditions recorded at the nearest weather station were obtained from the Bureau of Meteorology website and total rainfall less evaporation was calculated for 7 and 28 days prior to each match. All non-contact injuries occurring during match play and their location on the field were recorded. Results/conclusions: Ground hardness varied between CSIT 5 and 17 (x10G) (8 is considered a good value for sports fields). Variations within fields were typically greatest in the centre and goal areas. Soil moisture ranged from 3 to 40% with some fields requiring twice the moisture content of others to maintain similar CSIT values. There was a non-linear, negative relationship for ground hardness versus moisture content and a linear relationship with weather (R2, of 0.30 and 0.34, respectively). Three non-contact ACL injuries occurred during the season. Two of these were associated with hard and variable ground conditions.

Are we there yet? Early years reform in Queensland : stakeholder perspectives on the introduction of funded preschool programs in long day care services

Australian educators are currently engaging with wide-ranging, national early childhood reform that is reshaping early childhood education and care. The Australian reform agenda reflects many of the early childhood policy directions championed by bodies such as the Organisation for Economic Cooperation and Development and the United Nations Children's Education Fund, and is based on the dual discourse of (i) starting strong and (ii) investing in the early years. However, despite its traction in policy rhetoric and policy there is little empirical evidence of how reform is being played out. This paper reports on research undertaken in collaboration with the Queensland Office for Early Childhood Education and Care to generate sector feedback on one element of the reform agenda, the implementation of universal preschool in Queensland. The study aimed to determine the efficacy of the new policy in supporting the provision of 'approved preschool programs' within long day care services. Drawing together the views and experiences of a range of stakeholders, including peak organisations, service providers, directors, preschool teachers and government policy officers, it provides a situated case study of the implementation of universal preschool, and offers empirical evidence of how this policy is being played out at the local level. The paper identifies the opportunities and challenges in implementing universal preschool in Queensland that may have bearing on early childhood reform in Australia as well as other countries. Discussion of key findings is set within an overview of the ECEC policy agenda in Australia, with a particular focus on the commitment to universal preschool. Les éducateurs australiens s’engagent présentement dans une vaste réforme nationale de la petite enfance qui remodèle l'éducation et l’accueil de la petite enfance. Le programme de la réforme australienne reflète plusieurs des orientations en politique de la petite enfance soutenues par des organismes comme l'Organisation de coopération et de développement économiques (OCDE) et le Fonds des Nations Unies pour les enfants (UNICEF). Il s’appuie sur le double discours de (i) un bon départ et de (ii) l’investissement dans les premières années. Cependant, en dépit de son attrait en rhétorique de politique et en politique il y a peu de données empiriques sur la façon dont la réforme se déroule. Cet article rend compte de la recherche entreprise en collaboration avec le bureau de l'éducation et l’accueil à la petite enfance du Queensland afin d’obtenir une rétroaction du secteur sur un élément de la réforme, la mise sur pied du préscolaire universel dans le Queensland. L'étude visait à déterminer l'efficacité de la nouvelle politique pour soutenir la disposition «programmes préscolaires approuvés» dans les services de garde à temps plein. En regroupant les perspectives et les expériences d'une gamme d’intervenants, y compris d’importantes organisations, des prestataires de service, des directeurs, des enseignants du préscolaire et des fonctionnaires de politique gouvernementale, elle constitue une étude de cas localisée de l'exécution la mise sur pied du préscolaire universel, et fournit des données empiriques sur la façon dont cette politique se met en place au niveau local. L’article identifie les opportunités et les défis liés à l’implantation du préscolaire universel au Queensland, qui pourraient avoir une portée sur la réforme de petite enfance en Australie ainsi que dans d'autres pays. La discussion des principaux résultats est faite en lien avec un aperçu global de la politique d'éducation et d’accueil de la petite enfance en Australie, avec un accent particulier sur l'engagement envers le préscolaire universel. Los educadores australianos actualmente están involucrados en una amplia reforma de la educación temprana nacional que está revolucionando la educación preescolar y los servicios de cuidado. El programa de reforma Australiana refleja muchas de las direcciones políticas relacionadas con la infancia temprana incitadas por organismos como la Organización de Cooperación y Desarrollo Económicos y el Fondo Educacional Infantil de las Naciones Unidas, y se basa en el doble discurso de (i) empezando fuertemente e (ii) invertir en los primeros años. Sin embargo, a pesar de su política de tracción en retórica y política, hay pocos datos empíricos de cómo la reforma se está llevando a cabo. Este documento informa sobre las investigaciones llevadas a cabo en colaboración con la Oficina de Queensland de Educación tempana y cuidados, para generar comentarios del sector, sobre uno de los elementos de la agenda de reforma, la aplicación del preescolar universal en Queensland. El estudio tiene como objetivo determinar la eficacia de la nueva política para apoyar la prestación de "programas preescolares aprovados" dentro se los servicios de guardería y cuidado. Reuniendo los puntos de vista y las experiencias de una serie de interesados, entre ellos algunas organizaciones cumbre, proveedores de servicios, los directores, los maestros preescolares y oficiales de política y gobierno, se logra un estudio simulado de la implementación del preescolar universal, y ofrece evidencia empírica de cómo esta política se está llevando a cabo en el plano local. El documento identifica las oportunidades y desafíos en la implementación del preescolar universal en Queensland, que puede repercutir en la reforma de la indancia temprana en Australia, así como en otros países. La discusión de los resultados claves se encuentra en el interior de una visión de la agenda política de ECEC en Australia, con un enfoque particular en el compromiso con el preescolar universal.

Design considerations in an indirectly coupled multilevel motor controller

Permanent magnet (PM) motors utilising ironless stator structures have been incorporated into a wide variety of applications where high efficiency and stringent torque control are required. With recent developments in magnetic materials, improved design strategies, and power outputs of up to 40kW, PM motors have become an attractive candidate for traction drives in electric and hybrid electric vehicles. However, due to their large air gaps and ironless stators these motors can have inductances as low as 2μH, imposing increased requirements on the converter to minimise current ripple. Multilevel converters with n cells can effectively increase the motor inductance by a factor of n2 and are an excellent approach to minimise the motor ripple current. Furthermore by indirectly coupling the outputs of each cell, improvements in converter input and cell ripple current can also be realised. This paper examines the issues in designing a high current indirectly coupled multilevel motor controller for an ironless BLDC traction drive and highlights the limitations of the common ladder core structure.

A cross-discipline and collaborative approach to identifying the predictors of environmentally friendly and health protective behaviour

Background. As a society, our interaction with the environment is having a negative impact on human health. For example, an increase in car use for short trips, over walking or cycling, has contributed to an increase in obesity, diabetes and poor heart health and also contributes to pollution, which is associated with asthma and other respiratory diseases. In order to change the nature of that interaction, to be more positive and healthy, it is recommended that individuals adopt a range of environmentally friendly behaviours (such as walking for transport and reducing the use of plastics). Effective interventions aimed at increasing such behaviours will need to be evidence based and there is a need for the rapid communication of information from the point of research, into policy and practice. Further, a number of health disciplines, including psychology and public health, share a common mission to promote health and well-being. Therefore, the objective of this project is to take a cross-discipline and collaborative approach to reveal psychological mechanisms driving environmentally friendly behaviour. This objective is further divided into three broad aims, the first of which is to take a cross-discipline and collaborative approach to research. The second aim is to explore and identify the salient beliefs which most strongly predict environmentally friendly behaviour. The third aim is to build an augmented model to explain environmentally friendly behaviour. The thesis builds on the understanding that an interdisciplinary collaborative approach will facilitate the rapid transfer of knowledge to inform behaviour change interventions. Methods. The application of this approach involved two surveys which explored the psycho-social predictors of environmentally friendly behaviour. Following a qualitative pilot study, and in collaboration with an expert panel comprising academics, industry professionals and government representatives, a self-administered, Theory of Planned Behaviour (TPB) based, mail survey was distributed to a random sample of 3000 residents of Brisbane and Moreton Bay Region (Queensland, Australia). This survey explored specific beliefs including attitudes, norms, perceived control, intention and behaviour, as well as environmental altruism and green identity, in relation to walking for transport and switching off lights when not in use. Following analysis of the mail survey data and based on feedback from participants and key stakeholders, an internet survey was employed (N=451) to explore two additional behaviours, switching off appliances at the wall when not in use, and shopping with reusable bags. This work is presented as a series of interrelated publications which address each of the research aims. Presentation of Findings. Chapter five of this thesis consists of a published paper which addresses the first aim of the research and outlines the collaborative and multidisciplinary approach employed in the mail survey. The paper argued that forging alliances with those who are in a position to immediately utilise the findings of research has the potential to improve the quality and timely communication of research. Illustrating this timely communication, Chapter six comprises a report presented to Moreton Bay Regional Council (MBRC). This report addresses aim's one and two. The report contains a summary of participation in a range of environmentally friendly behaviours and identifies the beliefs which most strongly predicted walking for transport and switching off lights (from the mail survey). These salient beliefs were then recommended as targets for interventions and included: participants believing that they might save money; that their neighbours also switch off lights; that it would be inconvenient to walk for transport and that their closest friend also walks for transport. Chapter seven also addresses the second aim and presents a published conference paper in which the salient beliefs predicting the four specified behaviours (from both surveys) are identified and potential applications for intervention are discussed. Again, a range of TPB based beliefs, including descriptive normative beliefs, were predictive of environmentally friendly behaviour. This paper was also provided to MBRC, along with recommendations for applying the findings. For example, as descriptive normative beliefs were consistently correlated with environmentally friendly behaviour, local councils could engage in marketing and interventions (workshops, letter box drops, internet promotions) which encourage parents and friends to model, rather than simply encourage, environmentally friendly behaviour. The final two papers, presented in Chapters eight and nine, addresses the third aim of the project. These papers each present two behaviours together to inform a TPB based theoretical model with which to predict environmentally friendly behaviour. A generalised model is presented, which is found to predict the four specific behaviours under investigation. The role of demographics was explored across each of the behaviour specific models. It was found that some behaviour's differ by age, gender, income or education. In particular, adjusted models predicted more of the variance in walking for transport amongst younger participants and females. Adjusted models predicted more variance in switching off lights amongst those with a bachelor degree or higher and predicted more variance in switching off appliances amongst those on a higher income. Adjusted models predicted more variance in shopping with reusable bags for males, people 40 years or older, those on a higher income and those with a bachelor degree or higher. However, model structure and general predictability was relatively consistent overall. The models provide a general theoretical framework from which to better understand the motives and predictors of environmentally friendly behaviour. Conclusion. This research has provided an example of the benefits of a collaborative interdisciplinary approach. It has identified a number of salient beliefs which can be targeted for social marketing campaigns and educational initiatives; and these findings, along with recommendations, have been passed on to a local council to be used as part of their ongoing community engagement programs. Finally, the research has informed a practical model, as well as behaviour specific models, for predicting sustainable living behaviours. Such models can highlight important core constructs from which targeted interventions can be designed. Therefore, this research represents an important step in undertaking collaborative approaches to improving population health through human-environment interactions.

Development of a new signal processing diagnostic tool for vibration signals acquired in transient conditions

The diagnostics of mechanical components operating in transient conditions is still an open issue, in both research and industrial field. Indeed, the signal processing techniques developed to analyse stationary data are not applicable or are affected by a loss of effectiveness when applied to signal acquired in transient conditions. In this paper, a suitable and original signal processing tool (named EEMED), which can be used for mechanical component diagnostics in whatever operating condition and noise level, is developed exploiting some data-adaptive techniques such as Empirical Mode Decomposition (EMD), Minimum Entropy Deconvolution (MED) and the analytical approach of the Hilbert transform. The proposed tool is able to supply diagnostic information on the basis of experimental vibrations measured in transient conditions. The tool has been originally developed in order to detect localized faults on bearings installed in high speed train traction equipments and it is more effective to detect a fault in non-stationary conditions than signal processing tools based on spectral kurtosis or envelope analysis, which represent until now the landmark for bearings diagnostics.