195 resultados para Conservative pact
Resumo:
This paper presents a Genetic Algorithms (GA) approach to resolve traffic conflicts at a railway junction. The formulation of the problem for the suitable application of GA will be discussed and three neighborhoods have been proposed for generation evolution. The performance of the GA is evaluated by computer simulation. This study paves the way for more applications of artificial intelligence techniques on a rather conservative industry.
Resumo:
Background, aim, and scope Urban motor vehicle fleets are a major source of particulate matter pollution, especially of ultrafine particles (diameters < 0.1 µm), and exposure to particulate matter has known serious health effects. A considerable body of literature is available on vehicle particle emission factors derived using a wide range of different measurement methods for different particle sizes, conducted in different parts of the world. Therefore the choice as to which are the most suitable particle emission factors to use in transport modelling and health impact assessments presented as a very difficult task. The aim of this study was to derive a comprehensive set of tailpipe particle emission factors for different vehicle and road type combinations, covering the full size range of particles emitted, which are suitable for modelling urban fleet emissions. Materials and methods A large body of data available in the international literature on particle emission factors for motor vehicles derived from measurement studies was compiled and subjected to advanced statistical analysis, to determine the most suitable emission factors to use in modelling urban fleet emissions. Results This analysis resulted in the development of five statistical models which explained 86%, 93%, 87%, 65% and 47% of the variation in published emission factors for particle number, particle volume, PM1, PM2.5 and PM10 respectively. A sixth model for total particle mass was proposed but no significant explanatory variables were identified in the analysis. From the outputs of these statistical models, the most suitable particle emission factors were selected. This selection was based on examination of the statistical robustness of the statistical model outputs, including consideration of conservative average particle emission factors with the lowest standard errors, narrowest 95% confidence intervals and largest sample sizes, and the explanatory model variables, which were Vehicle Type (all particle metrics), Instrumentation (particle number and PM2.5), Road Type (PM10) and Size Range Measured and Speed Limit on the Road (particle volume). Discussion A multiplicity of factors need to be considered in determining emission factors that are suitable for modelling motor vehicle emissions, and this study derived a set of average emission factors suitable for quantifying motor vehicle tailpipe particle emissions in developed countries. Conclusions The comprehensive set of tailpipe particle emission factors presented in this study for different vehicle and road type combinations enable the full size range of particles generated by fleets to be quantified, including ultrafine particles (measured in terms of particle number). These emission factors have particular application for regions which may have a lack of funding to undertake measurements, or insufficient measurement data upon which to derive emission factors for their region. Recommendations and perspectives In urban areas motor vehicles continue to be a major source of particulate matter pollution and of ultrafine particles. It is critical that in order to manage this major pollution source methods are available to quantify the full size range of particles emitted for traffic modelling and health impact assessments.
Resumo:
This book (256 pages, written in Korean) is a critical essay that reviews, questions, and criticises Korean and Eastern immigrants’ thinking and behaviour styles in Australia from their cultural perspectives, and discuss and proposes a creative cultural dimension for their better life in a multicultural context. Multiculturalism is not supportive of Eastern cultures because of individualistic collection of cultures, while transculturalism facilitates nurture of their culture in a community-oriented way within multicultural circumstances. Korean and Eastern immigrants, sharing oriental cultural systems and values, should approach to the Australian multicultural context with transculturalism which allows creating new cultural values in collaboration with and by participation into local communities. ------------------------------------------------------------ Many Eastern immigrants live in their own ethnic communities without or less interacting with Australian (communities). The author defines this phenomenon as “reverse immigration”. Reverse immigration refers to re-immigrating to their ethnic community in Australia or to their birth country despite they did not anticipate that this would happen to them before immigration to Australia. The author argues that Easterners’ collectivistic culture often devalues individuality and vice versa. Cultural clash between West and East often forces the immigrants to choose reverse immigration because of their lack of understanding of Western culture and their cultural characteristics such as low individuality, high power distance, and high uncertainty avoidance. For example, a vague boundary between individualist and collectivist in a collectivistic context (within their ethnic group) often leads to maladjustment to local communities and enhancement of cultural conservatism. The author proposes that the cultural clash can be overcome by cross-cultural activities named “transculturalism”. To Eastern immigrants, transculturalism can be achieved by acculturation of their two predominant cultures, the third-person perspective and generalised others. In a multicultural context, the former refers to the ability to share another person's feelings and emotions as if they were your own, and the latter does the ability to manage community and public expectations. When both cultural values are used for quality interactions between East and West, they allow Eastern immigrants to be more creative and critical and Australian to be more socially inclusive and culturally tolerant. With these discussions, the author discusses cultural differences throughout the book with four topics (chapters) and proposes transculturalism as a solution to the reverse immigration. ------------------------------------------------------------ Chapter 1 criticises Koreans’ attitudes and methods towards learning English that is less pragmatic and practical, but more likely to be a scholarly study. The author explains that Koreans’ non-pragmatic towards learning English has been firmly built based on their traditional systems and values that Koreans view English as a discipline and an aim of academic achievements rather than a means of communication. Within their cultural context, English can be perceived as more than a language, but something like vastly superior to their language and culture. Their collectivistic culture regards English as an unreachable and heterogeneous one that may threaten their cultural identity, so that “scholarly studying” is only the way to achieve (not learn) it. This discourages the immigrants to engage and involve in daily dialogues by “using” English as a second language. The author further advises the readers to be aware of Eastern collectivistic culture in communication and interaction that sometimes completely reverses private and public topics in a Western context. This leads them to feel that they have no content to talk to natives. ------------------------------------------------------------ Chapter 2 compares between Korea and Australia in terms of their educational systems and values, and proposes how Eastern overseas students can achieve critical and creative thinking within a Western educational setting. Interestingly, this chapter includes an explanation of why Eastern overseas students easily fail assessments including essay writing, oral presentations and discussions. One of the reasons the author explains is that Eastern students are not familiar to criticise others and think creatively, especially when they recognise that their words and ideas may harm the collectivistic harmony. Western educational systems focuses on enhancement of individuality such as self-confidence, self-esteem, and self-expression, while Eastern educational systems foster group-oriented values such as interpersonal relationship, and strong moral and spiritual values. Yet, the author argues that the collectivistic approach to criticism and creativity is often more critical and creative than Western individuals when they know what they are supposed to do for a group (or a community). Therefore, Eastern students need to think their cultural merits and demerits by using an individual perspective rather than generalised others’ perspective. The latter often discourages individual participation in a community, and the generalised others in a Western culture is weaker than Eastern. Furthermore, Western educational systems do not educate students to transform (loose) their individuality to fit into a group or a community. Rather they cultivate individuality for community prosperity. ------------------------------------------------------------ Chapter 3 introduces various cases of reverse immigration in workplaces that many immigrants return to their country or their ethnic community after many trials for acculturation. Reverse immigration is unexpected and not planned before immigration, so that its emotional embarrassment increases such severe social loneliness. Most Eastern immigrant workers have tried to adjust themselves in this new cultural environment at the early stages of immigration. However, their cultural features of collectivism, high power distance, high uncertainty avoidance, and long-term oriented cultures suppress individual initiative and eliminate the space for experiments in ways of acculturation. The author argues that returning to their ethnic community (physically and psychologically) leads to two significant problems: their distorted parenting and becoming more conservatives. The former leads the first generation of immigrants to pressure their children to pursue extrinsic or materialist values, such as financial success, fame and physical appearance, rather than on intrinsic values, while the latter refers to their isolated conservative characters because of their remoteness from the changes of their own country. The author also warns that their ethnic and religious groups actively strengthens immigrants’ social loneliness and systematically discourages immigrants’ interests and desire to be involving into local communities. The ethnic communities and leaders have not been interacting with Australian local communities and, as a result, are eager to conserve outdated cultural systems values. Even they have a tendency to weed out those people who wish to settle down within Australian local communities. They believe that those people can threaten their community’s survival and continuity. ------------------------------------------------------------ Chapter 4 titled multiculturalism argues that Korean and Eastern immigrants should more precisely understand Australia as a multicultural society in a way of collaboratively creating new cultural values. The author introduces multiculturalism with its definitions and history in Australia and argues the limitations of multiculturalism from an Easterner’s perspective. With well known tragedies of the second generations of U.S. immigrants, Cho Seung-Hui, a university student, massacred 32 people on the Virginia Tech before committing suicide and Hidal Hassan, an Army psychiatrist, killed 13 people at Fort Hood and the responses of ethnic community, the author explains that their mental illness may be derived from their parents’ (or ethnic group) culturally isolated attitude and socially static viewpoint of U.S. (Western system and values). The author insists that multiculturalism may restrict Eastern immigrants’ engagement and involvement in local communities. Multiculturalism has been systematically and historically developed based on Western systems and cultural values. In other words, multiculturalism requires high self-confidence and self-esteem that Eastern immigrants less prioritise them. It has been generally known that Easterners put more weight on human relationship than Westerners, but the author claims that this is not true. Within an individualistic culture, Westerners are more interested in building person-to-person connections and relationships. While Easterners are more interested in how individuals can achieve a sense of belonging within a group and a community. Therefore, multiculturalism is an ideology which forces Eastern immigrants to discard their strong desire to be part of a group and does not give a sense of belonging. In a consequence, the author advises that Eastern immigrants should aim towards “transculturalism” which allows them to actively participate in and contribute to their multicultural community. Transculturalism does not ask Easterners to discard their cultural values, but enables them to be a collectivistic individualist (a community leader) who is capable of developing new cultural values in a more creative and productive way. Furthermore, transculturalism encourages Western Australians in a multicultural context to collaborate with ethnic minorities to build a better community.
Resumo:
This paper is concerned with some plane strain and axially symmetric free surface problems which arise in the study of static granular solids that satisfy the Coulomb-Mohr yield condition. Such problems are inherently nonlinear, and hence difficult to attack analytically. Given a Coulomb friction condition holds on a solid boundary, it is shown that the angle a free surface is allowed to attach to the boundary is dependent only on the angle of wall friction, assuming the stresses are all continuous at the attachment point, and assuming also that the coefficient of cohesion is nonzero. As a model problem, the formation of stable cohesive arches in hoppers is considered. This undesirable phenomena is an obstacle to flow, and occurs when the hopper outlet is too small. Typically, engineers are concerned with predicting the critical outlet size for a given hopper and granular solid, so that for hoppers with outlets larger than this critical value, arching cannot occur. This is a topic of considerable practical interest, with most accepted engineering methods being conservative in nature. Here, the governing equations in two limiting cases (small cohesion and high angle of internal friction) are considered directly. No information on the critical outlet size is found; however solutions for the shape of the free boundary (the arch) are presented, for both plane and axially symmetric geometries.
Resumo:
Decentralised sensor networks typically consist of multiple processing nodes supporting one or more sensors. These nodes are interconnected via wireless communication. Practical applications of Decentralised Data Fusion have generally been restricted to using Gaussian based approaches such as the Kalman or Information Filter This paper proposes the use of Parzen window estimates as an alternate representation to perform Decentralised Data Fusion. It is required that the common information between two nodes be removed from any received estimates before local data fusion may occur Otherwise, estimates may become overconfident due to data incest. A closed form approximation to the division of two estimates is described to enable conservative assimilation of incoming information to a node in a decentralised data fusion network. A simple example of tracking a moving particle with Parzen density estimates is shown to demonstrate how this algorithm allows conservative assimilation of network information.
Resumo:
The aim of this paper is to demonstrate the validity of using Gaussian mixture models (GMM) for representing probabilistic distributions in a decentralised data fusion (DDF) framework. GMMs are a powerful and compact stochastic representation allowing efficient communication of feature properties in large scale decentralised sensor networks. It will be shown that GMMs provide a basis for analytical solutions to the update and prediction operations for general Bayesian filtering. Furthermore, a variant on the Covariance Intersect algorithm for Gaussian mixtures will be presented ensuring a conservative update for the fusion of correlated information between two nodes in the network. In addition, purely visual sensory data will be used to show that decentralised data fusion and tracking of non-Gaussian states observed by multiple autonomous vehicles is feasible.
Resumo:
This paper presents the details of experimental studies on the shear strength of a recently developed, cold-formed steel beam known as LiteSteel Beam (LSB) with web openings. The innovative LSB sections have the beneficial characteristics of torsionally rigid closed rectangular flanges combined with economical fabrication processes from a single strip of high strength steel. They combine the stability of hot-rolled steel sections with the high strength to weight ratio of conventional cold-formed steel sections. The LSB sections are commonly used as flexural members in the building industry. Current practice in flooring systems is to include openings in the web element of floor joists or bearers so that building services can be located within them. Shear behaviour of LSBs with web openings is more complicated while their shear strengths are considerably reduced by the presence of web openings. However, limited research has been undertaken on the shear behaviour and strength of LSBs with web openings. Therefore a detailed experimental study involving 26 shear tests was undertaken to investigate the shear behaviour and strength of different LSB sections. Simply supported test specimens of LSBs with an aspect ratio of 1.5 were loaded at midspan until failure. This paper presents the details of this experimental study and the results. Experimental results showed that the current design rules in cold-formed steel structures design codes (AS/NZS 4600) [1] are very conservative for the shear design of LSBs with web openings. Improved design equations have been proposed for the shear strength of LSBs with web openings based on experimental results from this study.
Resumo:
This paper presents the details of numerical studies on the shear strength of a recently devel-oped, cold-formed steel channel beam known as LiteSteel Beam (LSB) with web openings. The LSB sections are commonly used as floor joists and bearers in residential, industrial and commercial buildings. In these ap-plications they often include web openings for the purpose of locating services. This has raised concerns over the shear capacity of LSB floor joists and bearers. Therefore experimental and numerical studies were under-taken to investigate the shear behavior and strength of LSBs with web openings. In this research, finite ele-ment models of LSBs with web openings in shear were developed to simulate the shear behavior of LSBs. It was found that currently available design equations are conservative or unconservative for the shear design of LSBs with web openings. Improved design equations have been proposed for the shear capacity of LSBs with web openings based on both experimental and numerical study results.
Resumo:
This paper presents the details of a parametric study based on finite element analyses (FEA) and development of design rules for the shear strength of a recently developed, cold-formed steel channel beam known as LiteSteel Beam (LSB). The LSB sections are commonly used as flexural members in residential, in-dustrial and commercial buildings. In order to ensure safe and efficient designs of LSBs, many research stu-dies have been undertaken on the flexural behaviour of LSBs. However, no research has been undertaken on the shear behaviour of LSBs. Therefore a detailed investigation including both numerical and experimental studies was undertaken to investigate the shear behaviour of LSBs. Both the experimental and FEA parametric study results showed that the current design rules in cold-formed steel design codes are very conservative for the shear design of LSBs. New shear strength equations for LSBs were proposed based on the experimental and FEA parametric study results.
Resumo:
For decades, indeed centuries, the Scottish media have been a source of national pride. Alongside the education system, the Church of Scotland and the legal apparatus the media have been rightly viewed as a distinctive Scottish cultural institution, a key part of what makes Scotland a nation rather than a region. Scotland has long sustained, per capita, one of the richest and most diverse media systems in the world, encapsulating a heady mix of local newspapers such as the West Highland Free Press, national [i.e., Scotland-wide] newspapers and broadcast outlets such as BBC Scotland and the Scotsman, and UK-based media with Scottish editions such as the Sun and the Mail. These media have reflected and fuelled what is in turn a distinctive Scottish political identity separate from, though connected with that of the United Kingdom as a whole. There has, for example, been no major paper with a pro-Tory editorial line north of the border for longer than most of us can remember, reflecting (and perhaps contributing to) the Conservative Party’s poor showing in successive Scottish elections.
Resumo:
In this review piece, we survey the literature on the cost of equity capital implications of corporate disclosure and conservative accounting policy choice decisions with the principle objective of providing insights into the design and methodological issues, which underlie the empirical investigations. We begin with a review of the analytical studies most typically cited in the empirical research as providing a theoretical foundation. We then turn to consider literature that offers insights into the selection of proxies for each of our points of interest, cost of equity capital, disclosure quality and accounting conservatism. As a final step, we review selected empirical studies to illustrate the relevant evidence found within the literature. Based on our review, we interpret the literature as providing the researcher with only limited direct guidance on the appropriate choice of measure for each of the constructs of interest. Further, we view the literature as raising questions about both the interpretation of empirical findings in the face of measurement concerns and the suitability of certain theoretical arguments to the research setting. Overall, perhaps the message which is most clear is that one of the most controversial and fundamental issues underlying the literature is the issue of the diversifiability or nondiversifiability of information effects.
Resumo:
An improved mesoscopic model is presented for simulating the drying of porous media. The aim of this model is to account for two scales simultaneously: the scale of the whole product and the scale of the heterogeneities of the porous medium. The innovation of this method is the utilization of a new mass-conservative scheme based on the Control-Volume Finite-Element (CV-FE) method that partitions the moisture content field over the individual sub-control volumes surrounding each node within the mesh. Although the new formulation has potential for application across a wide range of transport processes in heterogeneous porous media, the focus here is on applying the model to the drying of small sections of softwood consisting of several growth rings. The results conclude that, when compared to a previously published scheme, only the new mass-conservative formulation correctly captures the true moisture content evolution in the earlywood and latewood components of the growth rings during drying.
Resumo:
An experimental laboratory investigation was carried out to assess the structural adequacy of a disused PHO Class Flat Bottom Rail Wagon (FRW) for a single lane low volume road bridge application as per the design provisions of the Australian Bridge Design Standard AS 5100(2004). The investigation also encompassed a review into the risk associated with the pre-existing damage in wagons incurred during their service life on rail. The main objective of the laboratory testing of the FRW was to physically measure its performance under the same applied traffic loading it would be required to resist as a road bridge deck. In order to achieve this a full width (5.2m) single lane, single span (approximately 10m), simply supported bridge would be required to be constructed and tested in a structural laboratory. However, the available clear spacing between the columns of the loading portal frame encountered within the laboratory was insufficient to accommodate the 5.2m wide bridge deck excluding clearance normally considered necessary in structural testing. Therefore, only half of the full scale bridge deck (single FRW of width 2.6m) was able to be accommodated and tested; with the continuity of the bridge deck in the lateral direction applied as boundary constraints along the full length of the FRW at six selected locations. This represents a novel approach not yet reported in the literature for bridge deck testing to the best of the knowledge of the author. The test was carried out under two loadings provided in AS 5100 (2004) – one stationary W80 wheel load and the second a moving axle load M1600. As the bridge investigated in the study is a single lane single span low volume road bridge, the risk of pre-existing damage and the expected high cycle fatigue failure potential was assessed as being minimal and hence the bridge deck was not tested structurally for fatigue/ fracture. The high axle load requirements have instead been focussed upon the investigation into the serviceability and ultimate limit state requirements. The testing regime adopted however involved extensive recording of strains and deflections at several critical locations of the FRW. Three locations of W80 point load and two locations of the M1600 Axle load were considered for the serviceability testing; the FRW was also tested under the ultimate load dictated by the M1600. The outcomes of the experimental investigation have demonstrated that the FRW is structurally adequate to resist the prescribed traffic loadings outlaid in AS 5100 (2004). As the loading was directly applied on to the FRW, the laboratory testing is assessed as being significantly conservative. The FRW bridge deck in the field would only resist the load transferred by the running platform, where, depending on the design, composite action might exist – thereby the share of the loading which needs to be resisted by the FRW would be smaller than the system tested in the lab. On this basis, a demonstration bridge is under construction at the time of writing this thesis and future research will involve field testing in order to assess its performance.
Resumo:
It has been argued that the origins of modern creative industries policies can be found in Australia. The Creative Nation national cultural policy statement released by the Labor government headed by the Prime Minister Paul Keating in 1994 sought an original synthesis of arts and media policies that was outwardly looking, identifying the opportunities presented by what were then new digital media technologies, and clearly stated the economic opportunities presented by promotion of what were referred to at the time as the cultural industries. Several commentators have identified the influence that Creative Nation had on the Blair Labour government when it came to power in the United Kingdom in 1997. Faced with the question of how to revitalise the once-mighty industrial cities of the U.K. after the Conservative government, the Department of Culture, Media and Sport drew upon policy documents such as Australia’s Creative Nation, as well as the experience of local governments in these cities, in looking to the cultural sectors to spearhead new jobs growth, as well as re-branding the cities as cultural or creative cities in a post-industrial economic landscape. This growing alignment of culture and economics, that has been a characteristic of creative industries policies as they have developed in Australia, Britain, East Asia and Europe, marks an interesting shift in the traditional focus of arts and cultural policy as compensatory to the economic domain. The first Chair of what would become the Arts Council of Great Britain (now the Arts Council of England) was the famous economist John Maynard Keynes. In the First Annual Report of the Arts Council for 1945-1946, prepared in the latter stages of the Second World War, Keynes proposed that “the day is not far off when the economic problem will take the back seat where it belongs, and the arena of the heart and the head will be occupied or reoccupied, by our real problems — the problems of life and of human relations, of creation and behaviour and religion”. 中文摘要 1994年工黨執政時期澳洲總理基挺(Paul Keating)發表創意的國家(The Creative Nation)的文化政策聲明堪稱是澳洲現代創意產業的起源,該聲明試圖將藝術與媒體政策結合在一起,其目的在面向海外,為新數位媒體技術尋找機會。聲明中明確指出要推動文化產業為經濟帶來機會。「文化政策也是經濟政策。文化創造財富與附加價值,對創新、行銷與設計有重要貢獻,是我們工業的標誌(badge)。我們創意的層次實際上決定了我們適應新經濟imperatives的能力。文化本身就是項重要出口,是其他產品出口的主要附件(essential accompaniment)。文化吸引觀光與學生,也是我們經濟成功之關鍵。」 創意產業的策略是構建藝術、媒體與資訊電信科技的網絡以利文化產業在國家創新政策策略中擁有一席之地。此一策略最早是由1990年代末英國布萊爾(Tony Blair)的新工黨政府所採行,其後歐洲聯盟、澳洲、紐西蘭、新加坡、台灣、南韓與中國。
Resumo:
This paper describes the cloning and characterization of a new member of the vascular endothelial growth factor (VEGF) gene family, which we have designated VRF for VEGF-related-factor. Sequencing of cDNAs from a human fetal brain library and RT-PCR products from normal and tumor tissue cDNA pools indicate two alternatively spliced messages with open reading frames of 621 and 564 bp, respectively. The predicted proteins differ at their carboxyl ends resulting from a shift in the open reading frame. Both isoforms show strong homology to VEGF at their amino termini, but only the shorter isoform maintains homology to VEGF at its carboxyl terminus and conserves all 16 cysteine residues of VEGF165. Similarity comparisons of this isoform revealed overall protein identity of 48% and conservative substitution of 69% with VEGF189. VRF is predicted to contain a signal peptide, suggesting that it may be a secreted factor. The VRF gene maps to the D11S750 locus at chromosome band 11q13, and the protein coding region, spanning approximately 5 kb, is comprised of 8 exons that range in size from 36 to 431 bp. Exons 6 and 7 are contiguous and the two isoforms of VRF arise through alternate splicing of exon 6. VRF appears to be ubiquitously expressed as two transcripts of 2.0 and 5.5 kb; the level of expression is similar among normal and malignant tissues.