The association between social support and levels of psychological distress in pregnant women in Australia

The purpose of this study was to explore associations between forms of social support and levels of psychological distress during pregnancy. Methods: A cross-sectional analysis of 2,743 pregnant women from south-east Queensland, Australia, was conducted utilising data collected between 2007-2011 as part of the Environments for Healthy Living (EFHL) project, Griffith University. Psychological distress was measured using the Kessler 6; social support was measured using the following four factors: living with a partner, living with parents or in-laws, self-perceived social network, and area satisfaction. Data were analysed using an ordered logistic regression model controlling for a range of socio-demographic factors. Results: There was an inverse association between self-perceived strength of social networks and levels of psychological distress (OR = 0.77; 95%CI: 0.70, 0.85) and between area satisfaction and levels of psychological distress (OR = 0.77; 95%CI: 0.69, 0.87). There was a direct association between living with parents or in-laws and levels of psychological distress (OR = 1.50; 95%CI: 1.16, 1.96). There was no statistically significant association between living with a partner and the level of psychological distress of the pregnant woman after accounting for household income. Conclusion: Living with parents or in-laws is a strong marker for psychological distress. Strategies aiming to build social support networks for women during pregnancy have the potential to provide a significant benefit. Policies promoting stable family relationships and networks through community development could also be effective in promoting the welfare of pregnant women.

Better cars or older cars?: Assessing CO2 emission reduction potential of passenger vehicle replacement programs

The primary motivation for the vehicle replacement schemes that were implemented in many countries was to encourage the purchase of new cars. The basic assumption of these schemes was that these acquisitions would benefit both the economy and the environment as older and less fuel-efficient cars were scrapped and replaced with more fuel-efficient models. In this article, we present a new environmental impact assessment method for assessing the effectiveness of scrappage schemes for reducing CO2 emissions taking into account the rebound effect, driving behavior for older versus new cars and entire lifecycle emissions for during the manufacturing processes of new cars. The assessment of the Japanese scrappage scheme shows that CO2 emissions would only decrease if users of the scheme retained their new gasoline passenger vehicles for at least 4.7 years. When vehicle replacements were restricted to hybrid cars, the reduction in CO2 achieved by the scheme would be 6-8.5 times higher than the emissions resulting from a scheme involving standard, gasoline passenger vehicles. Cost-benefit analysis, based on the emission reduction potential, showed that the scheme was very costly. Sensitivity analysis showed that the Japanese government failed to determine the optimum, or target, car age for scrapping old cars in the scheme. Specifically, scrapping cars aged 13 years and over did not maximize the environmental benefits of the scheme. Consequently, modifying this policy to include a reduction in new car subsidies, focused funding for fuel-efficient cars, and modifying the target car age, would increase environmental benefits. © 2013 Elsevier Ltd.

Interpreting scratch assays using pair density dynamics and approximate Bayesian computation

Quantifying the impact of biochemical compounds on collective cell spreading is an essential element of drug design, with various applications including developing treatments for chronic wounds and cancer. Scratch assays are a technically simple and inexpensive method used to study collective cell spreading; however, most previous interpretations of scratch assays are qualitative and do not provide estimates of the cell diffusivity, D, or the cell proliferation rate,l. Estimating D and l is important for investigating the efficacy of a potential treatment and provides insight into the mechanism through which the potential treatment acts. While a few methods for estimating D and l have been proposed, these previous methods lead to point estimates of D and l, and provide no insight into the uncertainty in these estimates. Here, we compare various types of information that can be extracted from images of a scratch assay, and quantify D and l using discrete computational simulations and approximate Bayesian computation. We show that it is possible to robustly recover estimates of D and l from synthetic data, as well as a new set of experimental data. For the first time, our approach also provides a method to estimate the uncertainty in our estimates of D and l. We anticipate that our approach can be generalized to deal with more realistic experimental scenarios in which we are interested in estimating D and l, as well as additional relevant parameters such as the strength of cell-to-cell adhesion or the strength of cell-to-substrate adhesion.

A non-aqueous solution synthesis of boron carbide by control of in-situ carbon

Synthesis of high quality boron carbide (B4C) powder is achieved by carbothermal reduction of boron oxide (B2O3) from a condensed boric acid (H3BO3) / polyvinyl acetate (PVAc) product. Precursor solutions are prepared via polymerisation of vinyl acetate (VA) in methanol in the presence of dissolved H3BO3. With excess VA monomer being removed during evaporation of the solvent, the polymerisation time is then used to manage availability of carbon for reaction.

Issues associated with using trash as a cogeneration fuel

Considerable work has been undertaken to determine an economical process to provide sugarcane trash as a fuel for cogeneration. This paper reviews efforts to provide that trash fuel by harvesting, transporting and processing the trash with the cane. Harvesting trash with the cane has the advantage that cane that would otherwise be lost by extracting it with the trash is captured and sugar can be produced from that cane. Transporting trash with the cane significantly reduces the bulk density of the cane, requiring substantial changes and costs to cane transport. Shredding the trash at the harvester and compacting the cane in the bin prior to transport are possible methods to increase the bulk density but both have considerable cost. Processing trash through the sugar factory with the cane significantly reduces sugar recovery and sugar quality. Although considerable knowledge has been gained of these effects and further analysis has provided insights into their causes, much more work is required before whole crop harvesting and transport is an economically viable means of trash recovery.

Seed germination may explain differences in invasiveness and prevalence : a case study using cat's claw creeper (Dolichandra unguis-cati)

High germination rates and rapid germination behavior in response to different environmental cues are traits that may be associated with invasiveness. Cat’s claw creeper (Dolichandra unguis-cati (L.) Lohmann (syn. Macfadyena unguis-cati (L.) Gentry), a Weed of National Significance has two forms, a long-pod (LP) form and a short-pod (SP) from. The LP form occurs in only a few localities in southeast Queensland while the SP form is widely distributed in Queensland and New South Wales. The aims of this investigation were: to evaluate whether there are significant differences in germination traits between the two forms of cat’s claw creeper; and if there are any significant differences, to find out whether the differences in germination can be related to prevalence and invasiveness levels for the two forms. Long pod and short pod seeds collected in 2009, 2010, 2011, 2012 and 2013 from various localities in Qld were germinated in growth chambers in early 2013. The growth chambers were set to 10/20 ºC, 15/25 ºC and 20/30 ºC temperature cycles. Seeds from 2009-2012 of either form did not germinate, while for the fresh seeds (2013), SP exhibited significantly higher total germination percentage and rates than LP. Assuming that the two forms were introduced in Australia at around the same period, these results could explain why SP is widely distributed (and therefore more invasive) in Qld and NSW while LP is only confined to a few localities in southeast Qld.

Enhancing Raman signal sufficiently for practical sensing applications

Techniques are presented for enhancing weak Raman scattering signals for rapid yet accurate substance detection. Novel surfaces that allow signal enhancement quantification are described as are eye-safe methodologies that maximize the stand-off Raman detection range.

The Corporate Governance Effects of Audit Committee

This chapter provides a synthesis and evaluation of empirical research on the governance effects associated with audit committees. Given recent policy recommendations in several countries aimed at strengthening these committees, it is important to establish what research evidence demonstrates about their existing governance contribution. A framework for analyzing the impact of audit committees is described, identifying potential perceived effects which may have led to their adoption and documented effects on aspects of the audit function, on financial reporting quality and on corporate performance. It is also shown that most of the existing research has focused on factors associated with audit committee existence, characteristics, and measures of activity and there is very little evidence on the processes associated with the operation of audit committees and the manner in which they influence organizational behavior. It is clear that there is no automatic relationship between the adoption of audit committee structures or characteristics and the achievement of particular governance effects, and caution may be needed over expectations that greater codification around factors such as audit committee members’ independence and expertise as the means of ‘‘correcting’’ past weaknesses in the arrangements for audit committees. The most fundamental question concerning what difference audit committees make in practice continues to be an important area for research development. For future research we suggest: (1) greater consideration of the organizational and institutional contexts in which audit committees operate; (2) explicit theorization of the processes associated with audit committee operation; (3) complementing extant research methods with field studies; and (4) investigation of unintended as well as expected consequences of audit committees.

Translocation of bats as a conservation strategy : previous attempts and potential problems

Translocation is an increasingly popular conservation tool from which a wide range of taxa have benefited. However, to our knowledge, bats have not been translocated successfully. Bats differ behaviourally, morphologically and physiologically from the taxa for which translocation the- ory has been developed, so existing guidelines may not be directly transferable. We review previous translocations of bats and discuss characteristics of bats that may require special consideration dur- ing translocation. Their vagility and homing ability, coloniality, roost requirements, potential ability to transmit diseases, susceptibility to anthropomorphic impacts, and cryptic nature have implications for establishing populations, effects of these populations on the release site, and ability to monitor translocation success following release. We hope that our discussion of potential problems will be able to supplement the existing, more generic guidelines to provide a starting point for the planning of bat translocations.

Potentially inappropriate prescribing in older patients discharged from acute care hospitals to residential aged care facilities

Background The frequency of prescribing potentially inappropriate medications (PIMs) in older patients remains high despite evidence of adverse outcomes from their use. Little is known about whether admission to hospital has any effect on appropriateness of prescribing. Objectives This study aimed to identify the prevalence and nature of PIMs and explore the association of risk factors for receiving a PIM. Methods This was a prospective study of 206 patients discharged to residential aged care facilities (RACFs) from acute care. All patients were aged at least 70 years and were admitted between July 2005 and May 2010; their admission and discharge medications were evaluated. Results Mean patient age was 84.8 ± 6.7 years; the majority (57%) were older than 85 years and mean (SD) Frailty Index was 0.42 (0.15). At least one PIM was identified in 112 (54.4%) patients on admission and 102 (49.5%) patients on discharge. Of all medications prescribed at admission (1728), 10.8% were PIMs and at discharge of 1759 medications, 9.6% were PIMs. Of total 187 PIMs on admission, 56 (30%) were stopped and 131 were continued; 32 new PIMs were introduced. Of the potential risk factors considered, in-hospital cognitive decline and frailty status were the only significant predictors of PIMs. Conclusion Although, admission to hospital is an opportunity to review the indications for specific medications, a high prevalence of inappropriate drug use was observed. The only associations with PIM use were the frailty status and in-hospital cognitive decline. Additional studies are needed to further evaluate this association.

Potentially inappropriate prescribing in older patients admitted to acute care hospitals and discharged to residential aged care facilities

Background The frequency of prescribing potentially inappropriate medications (PIMs) in older patients remains high regardless of the evidence of adverse outcomes from their use. This study aims to identify the prevalence and nature of PIMs at admission to acute care and at discharge to residential aged care facilities (RACFs) using the recently updated Beers’ Criteria. We also aim to identify if polypharmacy, age, gender and the frailty status of patients are independent risk factors for receiving a PIM. Methods This was a retrospective study of 206 patients discharged to RACFs from acute care. All patients were aged at least70 years and were admitted between July 2005 and May 2010; their admission and discharge medications were evaluated. Frailty status was measured as the Frailty Index (FI), adding each individual’s deficits and dividing by the total number of deficits considered, with FI 0.25 used as the cut-off between “fit” and “frail”. Results Mean patient age was 84.8 ± 6.7 years; the majority (57%) were older than 85 years and approximately 90% were frail. Patients were prescribed a mean of 7.2 regular medications at admission and 8.1 on discharge. At least one PIM was identified in 112 (54.4%) patients on admission and 102 (49.5%) patients on discharge. Of all medications prescribed at admission (1728), 10.8% were PIMs and at discharge of 1759 medications, 9.6% were PIMs. Of the total 187 PIMs on admission, 56 (30%) were stopped, and 131 were continued; 32 new PIMs were introduced. Commonly prescribed PIMs at both admission and discharge were central nervous system, cardiovascular and gastrointestinal drugs and analgesics. Of the potential risk factors, frailty status was the only significant predictor of PIMs at both admission and discharge (p = 0.016). Conclusion A high prevalence of unnecessary drug use was observed in frail older patients on admission to acute care hospitals and on discharge to RACFs. The only association with PIM use was the frailty status of patients. Further studies are needed to further evaluate this association.

Eye-safe UV stand-off Raman spectroscopy for explosive detection in the field

This project focused on maximising the detection range of an eye-safe stand-off Raman system for use in detecting explosives. Investigation of the effect on detection range through differing laser parameters in this thesis provided optimal laser settings to achieve the largest possible detection range of explosives, while still remaining under the eye-safe limit.

The learning capability of construction organisations engaged in collaborative contracting - Literature Review [industry report]

Background Value for money (VfM) on collaborative construction projects is dependent on the learning capabilities of the organisations and people involved. Within the context of infrastructure delivery, there is little research about the impact of organisational learning capability on project value. The literature contains a multiplicity of often un-testable definitions about organisational learning abilities. This paper defines learning capability as a dynamic capability that participant organisations purposely develop to add value to collaborative projects. The paper reports on a literature review that proposes a framework that conceptualises learning capability to explore the topic. This work is the first phase of a large-scale national survey funded by the Alliancing Association of Australasia and the Australian Research Council. Methodology Desk-top review of leading journals in the areas of strategic management, strategic alliances and construction management, as well as recent government documents and industry guidelines, was undertaken to synthesise, conceptualise and operationalise the concept of learning capability. The study primarily draws on the theoretical perspectives of the resource-based view of the firm (e.g. Barney 1991; Wernerfelt 1984), absorptive capacity (e.g. Cohen and Levinthal 1990; Zahra and George 2002); and dynamic capabilities (e.g. Helfat et al. 2007; Teece et al. 1997; Winter 2003). Content analysis of the literature was undertaken to identify key learning routines. Content analysis is a commonly used methodology in the social sciences area. It provides rich data through the systematic and objective review of literature (Krippendorff 2004). NVivo 9, a qualitative data analysis software package, was used to assist in this process. Findings and Future Research The review process resulted in a framework for the conceptualisation of learning capability that shows three phases of learning: (1) exploratory learning, (2) transformative learning and (3) exploitative learning. These phases combine both internal and external learning routines to influence project performance outcomes and thus VfM delivered under collaborative contracts. Sitting within these phases are eight categories of learning capability comprising knowledge articulation, identification, acquisition, dissemination, codification, internationalisation, transformation and application. The learning routines sitting within each category will be disaggregated in future research as the basis for measureable items in a large-scale survey study. The survey will examine the extent to which various learning routines influence project outcomes, as well as the relationships between them. This will involve identifying the routines that exist within organisations in the construction industry, their resourcing and rate of renewal, together with the extent of use and perceived value within the organisation. The target population is currently estimated to be around 1,000 professionals with experience in relational contracting in Australia. This future research will build on the learning capability framework to provide data that will assist construction organisations seeking to maximise VfM on construction projects.