How two-tier boards can be more effective

Purpose: This study explores how non-executive directors address governance problems on Dutch two-tier boards. Within this board model, challenges might be particularly difficult to address due to the formal separation of management boards’ decision-management from supervisory boards’ decision-control roles. Design/methodology/approach: Semi-structured interviews and a questionnaire among non-executive directors provide unique insights into three major challenges in the boardrooms of two-tier boards in the Netherlands. Findings: The study indicates that non-executive directors mainly experience challenges in three areas: the ability to ask management critical questions, information asymmetries between the management and supervisory boards and the management of the relationship between individual executive and non-executive directors. The qualitative in-depth analysis reveals the complexity of the contributing factors to problems in the boardroom and the range of process and social interventions non-executive directors use to address boardroom issues with management and the organization of the board. Practical implications: While policy makers have been largely occupied with the ‘right’ board composition, the results highlight the importance of adequately addressing operational challenges in the boardroom. The results emphasize the importance of a better understanding of board processes and the need of non-executive directors to carefully manage relationships in and around the boardroom. Originality/value: Whereas most studies have focussed on regulatory initiatives to improve the functioning of boards (e.g., the independence of the board), this study explores how non-executive directors attempt to enhance the effectiveness of boards on which they serve.

Legal regulation of 'decent work' : evidence from two big industries in Bangladesh

In most developing countries, the overall quality of the livelihood of labourers, work place environment and implementation of labour rights do not progress at the same rate as their industrial development. To address this situation, the ILO has initiated the concept of 'decent work' to assist regulators articulate labour-related social policy goals. Against this backdrop, this article assesses the Bangladesh Labour Law 2006 by reference to the four social principles developed by the ILO for ensuring 'decent work'. It explains the impact of the absence of these principles in this Law on the labour administration in the ready-made garment and ship-breaking industries. It finds that an appropriate legislative framework needs to be based on the principles of 'decent work' to establish a solid platform for a sound labour regulation in Bangladesh.

Improving power quality in low-voltage networks containing distributed energy resources

Severe power quality problems can arise when a large number of single-phase distributed energy resources (DERs) are connected to a low-voltage power distribution system. Due to the random location and size of DERs, it may so happen that a particular phase generates excess power than its load demand. In such an event, the excess power will be fed back to the distribution substation and will eventually find its way to the transmission network, causing undesirable voltage-current unbalance. As a solution to this problem, the article proposes the use of a distribution static compensator (DSTATCOM), which regulates voltage at the point of common coupling (PCC), thereby ensuring balanced current flow from and to the distribution substation. Additionally, this device can also support the distribution network in the absence of the utility connection, making the distribution system work as a microgrid. The proposals are validated through extensive digital computer simulation studies using PSCADTM

A statistical strategy to select optimal structural health monitoring data in operational modal analysis

Operational modal analysis (OMA) is prevalent in modal identifi cation of civil structures. It asks for response measurements of the underlying structure under ambient loads. A valid OMA method requires the excitation be white noise in time and space. Although there are numerous applications of OMA in the literature, few have investigated the statistical distribution of a measurement and the infl uence of such randomness to modal identifi cation. This research has attempted modifi ed kurtosis to evaluate the statistical distribution of raw measurement data. In addition, a windowing strategy employing this index has been proposed to select quality datasets. In order to demonstrate how the data selection strategy works, the ambient vibration measurements of a laboratory bridge model and a real cable-stayed bridge have been respectively considered. The analysis incorporated with frequency domain decomposition (FDD) as the target OMA approach for modal identifi cation. The modal identifi cation results using the data segments with different randomness have been compared. The discrepancy in FDD spectra of the results indicates that, in order to fulfi l the assumption of an OMA method, special care shall be taken in processing a long vibration measurement data. The proposed data selection strategy is easy-to-apply and verifi ed effective in modal analysis.

The Norfolk Island Eye Study (NIES) : rationale, methodology and distribution of ocular biometry (Biometry of the Bounty)

Aim: To describe the recruitment, ophthalmic examination methods and distribution of ocular biometry of participants in the Norfolk Island Eye Study, who were individuals descended from the English Bounty mutineers and their Polynesian wives. Methods: All 1,275 permanent residents of Norfolk Island aged over 15 years were invited to participate, including 602 individuals involved in a 2001 cardiovascular disease study. Participants completed a detailed questionnaire and underwent a comprehensive eye assessment including stereo disc and retinal photography, ocular coherence topography and conjunctival autofluorescence assessment. Additionally, blood or saliva was taken for DNA testing. Results: 781 participants aged over 15 years were seen (54% female), comprising 61% of the permanent Island population. 343 people (43.9%) could trace their family history to the Pitcairn Islanders (Norfolk Island Pitcairn Pedigree). Mean anterior chamber depth was 3.32mm, mean axial length (AL) was 23.5mm, and mean central corneal thickness was 546 microns. There were no statistically significant differences in these characteristics between persons with and without Pitcairn Island ancestry. Mean intra-ocular pressure was lower in people with Pitcairn Island ancestry: 15.89mmHg compared to those without Pitcairn Island ancestry 16.49mmHg (P = .007). The mean keratometry value was lower in people with Pitcairn Island ancestry (43.22 vs. 43.52, P = .007). The corneas were flatter in people of Pitcairn ancestry but there was no corresponding difference in AL or refraction. Conclusion: Our study population is highly representative of the permanent population of Norfolk Island. Ocular biometry was similar to that of other white populations. Heritability estimates, linkage analysis and genome-wide studies will further elucidate the genetic determinants of chronic ocular diseases in this genetic isolate.

Bandwidth considerations for multilevel converters

Multilevel converters can achieve an overall effective switch frequency multiplication and consequent ripple reduction through the cancellation of the lowest order switch frequency terms. This paper investigates the harmonic content and the frequency response of these multimodulator converters. It is shown that the transfer function of uniformly sampled modulators is a bessel function associated with the inherent sampling process. Naturally sampled modulators have a flat transfer function, but multiple switchings per switch cycle will occur unless the input is slew-rate limited. Lower sideband harmonics of the effective carrier frequency and, in uniform converters, harmonics of the input signal also limit the useful bandwidth. Observations about the effect of the number of converters, their type (naturally or uniformly sampled), and the ratio of modulating frequency and switch frequency are made

Risk factors for ocular surface squamous neoplasia recurrence after treatment with topical mitomycin C and interferon alpha-2b

Purpose To determine the rate of recurrence and associated risk factors following the use of mitomycin C (MMC) and/or interferon alpha-2b (IFN) for management of non-invasive ocular surface squamous neoplasia (OSSN). Design Retrospective non-comparative interventional case series. Methods Clinical practice setting of 135 patients treated consecutively with topical MMC (0.4 mg/mL) and/or IFN (1 million units/mL) for OSSN observed for clinical recurrence. Results Clinical recurrences were diagnosed in 19 of 135 (14.1%) eyes following topical treatment. The mean time to recurrence was 17.2 months (range 4 - 61) with 14 (73.7%) recurring within a two year period. There was no greater risk of recurrence identified for variables including lesion size, lesion location, gender, age, treatment type or duration. Post-hoc log-Rank pairwise comparisons revealed that lesions initially treated using surgery alone had significantly reduced time to recurrence (21.1 ± 5.6 months) compared to previous topical treatment with MMC (with or without surgery) (29.6 ± 4.7 months) (p = 0.04) and primary OSSN (23.2 ± 1.8 months) (p = 0.09). Conclusions Topical MMC and IFN are an effective treatment modality for a wide range of non-invasive OSSN. Topical therapy avoids the morbidity of excisional surgery with equivalent or reduced recurrence rates and should be considered as primary therapy.

Measuring the burden of disease in Shandong province : an adoption of the disability-adjusted life year [应用伤残调整寿命年测量山东省居民疾病负担]

Objective To estimate the burden of diseases in Shandong province by the means of DALY (Disability- adjusted life year) thus to investigate the key public health problems referencing for health policy making. Methods DALYs were calculated following the procedures developed for the Global Burden of Disease (GBD) study to ensure comparability. We measured YLLs using the mortality data of 19 Disease Surveillance Points (DSPs) in Shandong Province during 2000 and 2005. YLDs were estimated based on data for WPRO in the 2002 GBD study published by WHO. Results During this period, the average DALYs loss by all causes for the residents of DSPs in Shandong was 149.74 per thousand persons each year. Noncommunicable diseases accounted for 76.63% of the disability adjusted life years, communicable diseases and other disorders represented 14.13%, and injuries 9.24%. Nearly half of the DALYs (45%) happened among the elderly (60+). Malignant neoplasm was the number one cause of DALYs loss in the male, followed by neuropsychiatric disorder, injury, cerebrovascular disease, heart disease，etc. However, neuropsychiatric disorder possessed the largest single contributor to DALY in the female and followed by heart disease, malignant neoplasm, cerebrovascular disease and respiratory disease. Conclusion Non-communicable diseases such as circulatory diseases, neuropsychiatric disorders and malignant neoplasms were the main causes of disease burden in Shandong province. The importance of neuropsychiatric disorders was more striking and should be recognized properly. The lack of morbidity data is the main limitation of this study. Abstract in Chinese 目的 应用伤残调整寿命年测量山东省居民疾病负担,提出该地区主要卫生问题,为卫生决策提供科学依据. 方法 以山东省2000-2005年19个疾病监测点的死因监测资料为基础,利用世界卫生组织(WHO)提供的方法计算不同疾病在不同性别年龄人群所造成的伤残调整寿命年(DALYs),其中,YIJDs根据WHO公布的亚太区2002年疾病负担数据进行估算. 结果 2000-2005年山东省疾病监测系统居民因为早死和残疾年平均损失149.74个DALYs/千人,其中,76.6%的DALYs损失因慢性非传染性疾病所致,14.1%由传染性疾病等引起,9.2%因为意外伤害造成;接近1/2(45%)的DALYs损失发生在60岁以上人群;恶性肿瘤为造成男性居民DALYs损失的首位原因,其次为精神行为疾患、意外伤害、脑血管病和心脏病等,女性居民则以精神行为疾患为DALYs首位原因,其次为心脏病、恶性肿瘤、脑血管病和呼吸系统疾病. 结论 以循环系统疾病、精神行为疾惠和恶性肿瘤为首的慢性非传染性疾病为造成山东省疾病负担DALYs损失的主要原因.对于精神行为疾患的重要性的认识有待于进一步提高,研究的主要局限性在于发病率资料的缺乏.

Methodology for measuring the vertical displacements of bridges using fibre bragg grating sensors

In many bridges, vertical displacements are one of the most relevant parameters for structural health monitoring in both the short- and long-terms. Bridge managers around the globe are always looking for a simple way to measure vertical displacements of bridges. However, it is difficult to carry out such measurements. On the other hand, in recent years, with the advancement of fibre-optic technologies, fibre Bragg grating (FBG) sensors are more commonly used in structural health monitoring due to their outstanding advantages including multiplexing capability, immunity of electromagnetic interference as well as high resolution and accuracy. For these reasons, a methodology for measuring the vertical displacements of bridges using FBG sensors is proposed. The methodology includes two approaches. One of which is based on curvature measurements while the other utilises inclination measurements from successfully developed FBG tilt sensors. A series of simulation tests of a full-scale bridge was conducted. It shows that both approaches can be implemented to measure the vertical displacements for bridges with various support conditions, varying stiffness along the spans and without any prior known loading. A static loading beam test with increasing loads at the mid-span and a beam test with different loading locations were conducted to measure vertical displacements using FBG strain sensors and tilt sensors. The results show that the approaches can successfully measure vertical displacements.

Prevalence of childhood sexual abuse among 2508 college students in 6 provinces of China [中国6省市2508名大学生儿童期性虐待经历回顾性调查]

OBJECTIVE To assess the prevalence of childhood sexual abuse (CSA) in college students and to explore the association of CSA with youth mental health problem. METHODS A retrospective survey was conducted among 2508 students (females 1360, males 1148) in Nov. 2003 to Mar. 2004. The students were from 6 colleges/universities in Beijing, Hebei, Shanxi, Jiangsu, Shaanxi and Anhui provinces of China. RESULTS Of the 2508 students, 24.8% of females and 17.6% of males reported one or more types of nonphysical contact CSA (females 20.0% vs. males 14.6%) or/and physical contact CSA (females 14.1% vs. males 7.8%) before the age of 16 years. Risk of any CSA was not associated with the existence of siblings (one-child vs. two-or more child families), rural/non-rural residence during childhood, or parental education. Compared with their peers who had no CSA, the students with CSA showed significantly higher mean scores of psychological symptoms of somatization, obsessiveness, interpersonal sensitivity, depression, anxiety, hostility, phobic anxiety, paranoid ideation and psychoticism. CONCLUSION The problem of CSA was not uncommon and there was a significant correlation between CSA experience and students mental health problems. More attention should be paid on CSA prevention and provision of health services for the victims.

Sterilizing tissue-materials using pulsed power plasma

This paper investigates the potential of pulsed power to sterilize hard and soft tissues and its impact on their physico-mechanical properties. It hypothesizes that pulsed plasma can sterilize both vascular and avascular tissues and the transitive layers in between without deleterious effects on their functional characteristics. Cartilage/bone laminate was chosen as a model to demonstrate the concept, treated at low temperature, at atmospheric pressure, in short durations and in buffered environment using a purposed-built pulsed power unit. Input voltage and time of exposure were assigned as controlling parameters in a full factorial design of experiment to determine physical and mechanical alteration pre- and post-treatment. The results demonstrated that, discharges of 11 kV sterilized samples in 45 s, reducing intrinsic elastic modules from 1.4 ± 0.9 to 0.9 ± 0.6 MPa. There was a decrease of 14.1 % in stiffness and 27.8 % in elastic-strain energy for the top quartile. Mechanical impairment was directly proportional to input voltage (P value < 0.05). Bacterial inactivation was proportional to treatment time for input voltages above 32 V (P < 0.001; R Sq = 0.98). Thermal analysis revealed that helix-coil transition decelerated with exposure time and collagen fibrils were destabilized as denaturation enthalpy reduced by 200 μV. We concluded by presenting a safe operating threshold for pulsed power plasma as a feasible protocol for effective sterilization of connective tissues with varying level of loss in mechanical robustness which we argue to be acceptable in certain medical and tissue engineering application.

Hospital outpatients' responses to taking medications with driving warnings

OBJECTIVE The study investigates the knowledge, intentions, and driving behavior of persons prescribed medications that display a warning about driving. It also examines their confidence that they can self-assess possible impairment, as is required by the Australian labeling system. METHOD We surveyed 358 outpatients in an Australian public hospital pharmacy, representing a well-advised group taking a range of medications including those displaying a warning label about driving. A brief telephone follow-up survey was conducted with a subgroup of the participants. RESULTS The sample had a median age of 53.2 years and was 53 percent male. Nearly three quarters (73.2%) had taken a potentially impairing class of medication and more than half (56.1%) had taken more than one such medication in the past 12 months. Knowledge of the potentially impairing effects of medication was relatively high for most items; however, participants underestimated the possibility of increased impairment from exceeding the prescribed dose and at commencing treatment. Participants' responses to the safety implications of taking drugs with the highest level of warning varied. Around two thirds (62.8%) indicated that they would consult a health practitioner for advice and around half would modify their driving in some way. However, one fifth (20.9%) would drive when the traffic was thought to be less heavy and over a third (37.7%) would modify their medication regime so that they could drive. The findings from the follow-up survey of a subsample taking target drugs at the time of the first interview were also of concern. Only just over half (51%) recalled seeing the warning label on their medications and, of this group, three quarters (78%) reported following the warning label advice. These findings indicated that there remains a large proportion of people who either did not notice or did not consider the warning when deciding whether to drive. There was a very high level of confidence in this group that they could determine whether they were personally affected by the medication, which may be a problem from a safety perspective. CONCLUSION This study involved persons who should have had a very high level of knowledge and awareness of medication warning labeling. Even in this group there was a lack of informed response to potential impairment. A review of the Australian warning system and wider dissemination of information on medication treatment effects would be useful. Clarifying the importance of potential risk in the general community context is recommended for consideration and further research.

A comparative analysis of risk stratification tools for emergency department patients with chest pain

Background: Appropriate disposition of emergency department (ED) patients with chest pain is dependent on clinical evaluation of risk. A number of chest pain risk stratification tools have been proposed. The aim of this study was to compare the predictive performance for major adverse cardiac events (MACE) using risk assessment tools from the National Heart Foundation of Australia (HFA), the Goldman risk score and the Thrombolysis in Myocardial Infarction risk score (TIMI RS). Methods: This prospective observational study evaluated ED patients aged ≥30 years with non-traumatic chest pain for which no definitive non-ischemic cause was found. Data collected included demographic and clinical information, investigation findings and occurrence of MACE by 30 days. The outcome of interest was the comparative predictive performance of the risk tools for MACE at 30 days, as analyzed by receiver operator curves (ROC). Results: Two hundred eighty-one patients were studied; the rate of MACE was 14.1%. Area under the curve (AUC) of the HFA, TIMI RS and Goldman tools for the endpoint of MACE was 0.54, 0.71 and 0.67, respectively, with the difference between the tools in predictive ability for MACE being highly significant [chi2 (3) = 67.21, N = 276, p < 0.0001]. Conclusion: The TIMI RS and Goldman tools performed better than the HFA in this undifferentiated ED chest pain population, but selection of cutoffs balancing sensitivity and specificity was problematic. There is an urgent need for validated risk stratification tools specific for the ED chest pain population.

Analysis of interrelationships between critical waste factors in office building retrofit projects using interpretive structural modelling

The number of office building retrofit projects is increasing. These projects are characterised by processes which have a close relationship with waste generation and therefore demand a high level of waste management. In a preliminary study reported separately, we identified seven critical factors of on-site waste generation in office building retrofit projects. Through semi-structured interviews and Interpretive Structural Modelling, this research further investigated the interrelationships among these critical waste factors, to identify each factor’s level of influence on waste generation and propose effective solutions for waste minimization. “Organizational commitment” was identified as the fundamental issue for waste generation in the ISM system. Factors related to plan, design and construction processes were found to be located in the middle levels of the ISM model but still had significant impacts on the system as a whole. Based on the interview findings and ISM analysis results, some practical solutions were proposed for waste minimization in building retrofit projects: (1) reusable and adaptable fit-out design; (2) a system for as-built drawings and building information; (3) integrated planning for retrofitting work process and waste management; and (4) waste benchmarking development for retrofit projects. This research will provide a better understanding of waste issues associated with building retrofit projects and facilitate enhanced waste minimization.