Digital image databases support GIS operations

Evaluates trends in the imagery built into GIS applications to supplement existing vector data of streets, boundaries, infrastructure and utilities. These include large area digital orthophotos, Landsat and SPOT data. Future developments include 3 to 5 metre pixel resolutions from satellites, 1 to 2 metres from aircraft. GPS and improved image analysis techniques will also assist in improving resolution and accuracy.

Influence of different nitrogen rates and DMPP nitrification inhibitor on annual N2O emissions from a subtropical wheat–maize cropping system

Global cereal production will need to increase by 50% to 70% to feed a world population of about 9 billion by 2050. This intensification is forecast to occur mostly in subtropical regions, where warm and humid conditions can promote high N2O losses from cropped soils. To secure high crop production without exacerbating N2O emissions, new nitrogen (N) fertiliser management strategies are necessary. This one-year study evaluated the efficacy of a nitrification inhibitor (3,4-dimethylpyrazole phosphate—DMPP) and different N fertiliser rates to reduce N2O emissions in a wheat–maize rotation in subtropical Australia. Annual N2O emissions were monitored using a fully automated greenhouse gas measuring system. Four treatments were fertilized with different rates of urea, including a control (40 kg-N ha−1 year−1), a conventional N fertiliser rate adjusted on estimated residual soil N (120 kg-N ha−1 year−1), a conventional N fertiliser rate (240 kg-N ha−1 year−1) and a conventional N fertiliser rate (240 kg-N ha−1 year−1) with nitrification inhibitor (DMPP) applied at top dressing. The maize season was by far the main contributor to annual N2O emissions due to the high soil moisture and temperature conditions, as well as the elevated N rates applied. Annual N2O emissions in the four treatments amounted to 0.49, 0.84, 2.02 and 0.74 kg N2O–N ha−1 year−1, respectively, and corresponded to emission factors of 0.29%, 0.39%, 0.69% and 0.16% of total N applied. Halving the annual conventional N fertiliser rate in the adjusted N treatment led to N2O emissions comparable to the DMPP treatment but extensively penalised maize yield. The application of DMPP produced a significant reduction in N2O emissions only in the maize season. The use of DMPP with urea at the conventional N rate reduced annual N2O emissions by more than 60% but did not affect crop yields. The results of this study indicate that: (i) future strategies aimed at securing subtropical cereal production without increasing N2O emissions should focus on the fertilisation of the summer crop; (ii) adjusting conventional N fertiliser rates on estimated residual soil N is an effective practice to reduce N2O emissions but can lead to substantial yield losses if the residual soil N is not assessed correctly; (iii) the application of DMPP is a feasible strategy to reduce annual N2O emissions from sub-tropical wheat–maize rotations. However, at the N rates tested in this study DMPP urea did not increase crop yields, making it impossible to recoup extra costs associated with this fertiliser. The findings of this study will support farmers and policy makers to define effective fertilisation strategies to reduce N2O emissions from subtropical cereal cropping systems while maintaining high crop productivity. More research is needed to assess the use of DMPP urea in terms of reducing conventional N fertiliser rates and subsequently enable a decrease of fertilisation costs and a further abatement of fertiliser-induced N2O emissions.

Mechanical tension as a driver of connective tissue growth in vitro

We propose the progressive mechanical expansion of cell-derived tissue analogues as a novel, growth-based approach to in vitro tissue engineering. The prevailing approach to producing tissue in vitro is to culture cells in an exogenous “scaffold” that provides a basic structure and mechanical support. This necessarily pre-defines the final size of the implantable material, and specific signals must be provided to stimulate appropriate cell growth, differentiation and matrix formation. In contrast, surgical skin expansion, driven by increments of stretch, produces increasing quantities of tissue without trauma or inflammation. This suggests that connective tissue cells have the innate ability to produce growth in response to elevated tension. We posit that this capacity is maintained in vitro, and that order-of-magnitude growth may be similarly attained in self-assembling cultures of cells and their own extracellular matrix. The hypothesis that growth of connective tissue analogues can be induced by mechanical expansion in vitro may be divided into three components: (1) tension stimulates cell proliferation and extracellular matrix synthesis; (2) the corresponding volume increase will relax the tension imparted by a fixed displacement; (3) the repeated application of static stretch will produce sustained growth and a tissue structure adapted to the tensile loading. Connective tissues exist in a state of residual tension, which is actively maintained by resident cells such as fibroblasts. Studies in vitro and in vivo have demonstrated that cellular survival, reproduction, and matrix synthesis and degradation are regulated by the mechanical environment. Order-of-magnitude increases in both bone and skin volume have been achieved clinically through staged expansion protocols, demonstrating that tension-driven growth can be sustained over prolonged periods. Furthermore, cell-derived tissue analogues have demonstrated mechanically advantageous structural adaptation in response to applied loading. Together, these data suggest that a program of incremental stretch constitutes an appealing way to replicate tissue growth in cell culture, by harnessing the constituent cells’ innate mechanical responsiveness. In addition to offering a platform to study the growth and structural adaptation of connective tissues, tension-driven growth presents a novel approach to in vitro tissue engineering. Because the supporting structure is secreted and organised by the cells themselves, growth is not restricted by a “scaffold” of fixed size. This also minimises potential adverse reactions to exogenous materials upon implantation. Most importantly, we posit that the growth induced by progressive stretch will allow substantial volumes of connective tissue to be produced from relatively small initial cell numbers.

Editorial : Action research, action learning and community services

This edition of ALARj has a focus on the contribution of action learning and action research to the development of community services, particularly nonprofits. The landscape of community services has been changing rapidly in recent decades, and can be typified by the notion of complexity. Complexity in the nature of issues that services seek to respond to, complexity in the policy environment and systems of support that have tended to silo and compartmentalise problems and people, and complexity in the institutional location non-profit services occupy in ‘helping’ those who are seen as ‘in need’ or marginalised. In addition to being typified by complexity the environment in which community services are located is dynamic, undergoing profound and ongoing change as neo-liberal approaches to understanding and responding to human need, which emphasise the individualisation of risk, and market principles such as choice, competition and innovation, drive social policy. How can long held values of empowerment, care, inclusivity and benefit to individuals and communities have expression in community services as they grapple with the challenges of being viable and relevant in such a dynamically changing environment? This edition brings together a range of contributions which speak to these challenges. The thematic through these is that processes are needed which engage services and communities in ongoing processes of inquiry about how they can best proceed in contexts typified by complexity and change. Action learning and action research can provide processes of this character.

Indigenous names for Indigenous Support Centres as part of the Welcome to (University) Country

The significance of naming Indigenous Support Centres (ISCs) with Indigenous language terminology — given that such reconciliatory acts may serve as symbolic means to improve the cultural efficacy of an Australian university’s Welcome to Country on offer to Indigenous Australian students — is explored and discussed in this paper. A survey of all 39 Australian universities was conducted, and the results regarding the Indigenous naming of their ISCs were tabulated and compared.

An examination of how the military, the conservative press and ministerialist politicians generated support within Queensland for the war in South Africa in 1899 and 1900

This thesis examines the role of conservative newspaper proprietors and editors to generate support for war against the Boers in South Africa. The thesis utilises Rune Ottosen's theoretical model concerning newspapers creating a pro-war mentality, and S.E. Finer's theory on the influences of the military on civilian Government. The pivotal supportive roles of Governor Lamington and Premiers Dickson and Philp and the oppositional role of Premier Dawson are also examined.

An algebraic approach for determination of DG parameters to support voltage profiles in radial distribution networks

Rapidly increasing electricity demands and capacity shortage of transmission and distribution facilities are the main driving forces for the growth of Distributed Generation (DG) integration in power grids. One of the reasons for choosing a DG is its ability to support voltage in a distribution system. Selection of effective DG characteristics and DG parameters is a significant concern of distribution system planners to obtain maximum potential benefits from the DG unit. This paper addresses the issue of improving the network voltage profile in distribution systems by installing a DG of the most suitable size, at a suitable location. An analytical approach is developed based on algebraic equations for uniformly distributed loads to determine the optimal operation, size and location of the DG in order to achieve required levels of network voltage. The developed method is simple to use for conceptual design and analysis of distribution system expansion with a DG and suitable for a quick estimation of DG parameters (such as optimal operating angle, size and location of a DG system) in a radial network. A practical network is used to verify the proposed technique and test results are presented.

The importance of social support for students with intellectual disability : an intervention to promote mental health and well-being

Children and adolescents with intellectual disability have higher rates of mental health problems compared with there typically developing peers. Social support has been identified as an important protective factor for psychological well - being. In this paper we discuss the benefits of social support networks, and consider approaches for promoting children’s perceptions of the availability of social support. We describe an evidence-based intervention that has been specially adapted and implemented for students with intellectual disability in school settings. In a randomised controlled trial, the Aussie Optimism Resilience Skills Program was associated with improved perceptions of social support following a 10-week intervention. Educators need to be aware of the increased vulnerability of students with intellectual disability to the development mental health problems and the proactive ways in which they can promote psychological well - being within their classrooms.

Effect of real support conditions on the shear strength of hollow flange channel beams

This paper presents the details of experimental studies on the effect of real support conditions on the shear strength of LiteSteel beams (LSB). The LSB has a unique shape of a channel beam with two rectangular hollow flanges, made using a unique manufacturing process. In some applications in the building industry LSBs are used with only one web side plate (WSP) at their supports and are not used with full height web side plates (WSP) at their supports. Past research studies showed that theses real support connections did not provide simply supported conditions. Many studies have been carried out to evaluate the behaviour and design of LSBs with simply supported conditions subject to pure bending and predominant shear actions. To date, however, no investigation has been conducted into the effect of real support conditions on the shear strength of LSBs. Hence detailed experimental studies were undertaken to investigate the shear behaviour and strength of LSBs with real support conditions. A total of 28 experimental tests were conducted as part of the studies. Simply supported test specimens of LSBs with aspect ratios of 1.0 and 1.5 were loaded at mid-span until failure. It was found that the effect of using one WSP on the shear behaviour of LSB is significant and there is about 25% shear capacity reduction due to the lateral movement of the bottom flange at the supports. Shear capacity of LSB was also found to decrease when full height WSPs were not used. Suitable support connections were developed to improve the shear capacity of LSBs based on test results.

A molecular phylogeny of the checkered beetles and a description of Epiclininae a new subfamily (Coleoptera: Cleroidea: Cleridae)

We provide the first molecular phylogeny of the clerid lineage (Coleoptera: Cleridae, Thanerocleridae) within the superfamily Cleroidea to examine the two most recently-proposed hypotheses of higher-level classification. Phylogenetic relationships of checkered beetles were inferred from approximately ~5,000nt of both nuclear and mitochondrial rDNA (28S, 16S, and 12S) and the mitochondrial protein-coding gene COI. A worldwide sample of ~70 genera representing almost a quarter of generic diversity of the clerid lineage was included and phylogenies were reconstructed using Bayesian and Maximum Likelihood approaches. Results support the monophyly of many proposed subfamilies but were not entirely congruent with either current classification system. The subfamilial relationships within the Cleridae are resolved with support for three main lineages. Tillinae are supported as the sister group to all other subfamilies within the Cleridae, whereas Thaneroclerinae, Korynetinae and a new subfamily formally described here, Epiclininae subf. n, form a sister group to Clerinae + Hydnocerinae.

Toward a sustainable culture of peer partnership

This project is a two phase design working in partnership with five universities to develop, implement and systematically embed a distributive leadership model that aims to embed peer partnership (review, development) within the culture of teaching and learning excellence. This presentation will posit a ‘prototype’ peer review leadership model based on ongoing research that brings together both the fundamentals of peer review with the broader importance of context and persons. It will be argued that essential to teaching development is a need to address not only the implementation of peer partnership programs but also strategies to influence and change both the contexts of teaching and the advantages for colleagues. Peer review as a strategy to develop excellence in teaching needs to be considered from a holistic perspective encompassing all elements of the teaching environment. The emphasis is on working to foster the type of conditions needed for leadership and change to begin and be sustained. The work has implications for policy, research, leadership development and student outcomes and has potential application world-wide. Phase 1 has collected focus interview and questionnaire data to inform the research and is being analysed using a thematic qualitative approach and statistical analysis Evidence is emerging currently as the project is ongoing

Developing a culture of peer review of teaching through a distributive leadership approach

Teaching is a core function of higher education and must be effective if it is to provide students with learning experiences that are stimulating, challenging and rewarding Obtaining feedback on teaching is indispensable to enhancing the quality of learning design, facilitating personal and/or professional development and maximising student learning outcomes. Peer review of teaching has the potential to improve the quality of teaching at tertiary level, by encouraging critical reflection on teaching, innovation in teaching practice and scholarship of teaching at all academic levels. However, embedding peer review within the culture of teaching and learning is a significant challenge that requires sustained commitment from senior leadership as well as those in leadership roles within local contexts.

Enhancing student learning in the workplace through developing the leadership capabilities of clinical supervisors in the nursing discipline

The purpose of this project was to build the leadership capacity of clinical supervisors in the nursing discipline by developing, implementing and systematically embedding a leadership model into the structure and practice of student supervision. The University worked in partnership with three major metropolitan hospitals in Queensland to develop a framework and professional development program incorporating leadership and clinical supervision. The Leadership and Clinical Education (LaCE) program consisted of two structured workshops complemented by individual personal development projects undertaken by participants. Participants were supported in these activities with a purpose-built website that provides access to a wide variety of information and other learning resources. Quantitative and qualitative evaluations indicated that the approach was highly valued by participants, as it promoted useful peer dialogue, sharing of experiences and personal development in relation to assisting leadership development and student learning in the workplace. The LaCE program provides an ideal springboard for introducing the development of welltrained leaders into the clinical workplace. The resources developed have the potential to provide ongoing support for clinical supervisors to improve the learning of undergraduate nursing student. The challenge will be to achieve continued innovation within clinical education through sustainable leadership programs.

A new national women's health policy : legal, ethical and policy initiatives to support women's health

In 1989 the first National Women's Health Policy was launched in Australia. Now, 20 years later, the Federal Government has announced plans for the development of a new National Women's Health Policy to address the health needs of Australian women. The Policy will be based on five principles: gender equity; health equity between women; a focus on prevention; an evidence base for interventions; and a life course approach. This editorial examines the role for law in the development of a new National Women's Health Policy. It considers the relevance of regulatory frameworks for health research in supporting an evidence base for health interventions and analyses the requirement in the National Health and Medical Research Council's National Statement on Ethical Conduct in Human Research for "fair inclusion" of research participants. The editorial argues for a holistic approach to women's health that includes regulatory frameworks for research, identification of funding priorities for research, and the need for a dedicated government department or agency to promote women's health.

Reasoning paradigms in legal decision support systems

In this paper we discuss the strengths and weaknesses of a range of artificial intelligence approaches used in legal domains. Symbolic reasoning systems which rely on deductive, inductive and analogical reasoning are described and reviewed. The role of statistical reasoning in law is examined, and the use of neural networks analysed. There is discussion of architectures for, and examples of, systems which combine a number of these reasoning strategies. We conclude that to build intelligent legal decision support systems requires a range of reasoning strategies.