Influences of biodiesel chemical compositions and physical properties on engine exhaust particle emissions

This thesis presents a comprehensive study on the influences of biodiesel chemical composition and physical properties on diesel engine exhaust particle emissions. It examines biodiesels from several feedstocks having wide variations in their chemical composition (carbon chain length, unsaturation and oxygen content) and physical properties (density, viscosity, surface tension, boiling point etc.), and evaluates their influence on exhaust particle emissions. The outcome of this thesis is significant since it reveals the importance of regulating biodiesels chemical composition in order to ensure lowest possible emissions with better overall performance.

The future passenger experience: A shift from physical to virtual design

The importance of passenger experience in aviation has become well understood in the last several years. It is now generally accepted that the provision of good passenger experience is not an option, but a necessity, from an aviation profitability perspective. In this paper, we paint a picture of the future passenger experience by consolidating a number of industry and research perspectives. Using the future passenger experience as a starting point, we explore the components needed to enable this future vision. From this bottom-up approach, we identify the need to resolve data formatting and data ownership issues. The resolution of these data integration issues is necessary to enable the seamless future travel experience that is envisioned by the aviation industry. By looking at the passenger experience from this bottom-up, data centric perspective, we identify a potential shift in the way that future passenger terminals will be designed. Whereas currently the design of terminals is largely an architectural practice, in the near future, the design of the terminal building may become more of a virtual technology practice. This of course will pose a new set of challenges to designers of airport terminal environments.

PM348 Heart education assessment and rehabilitation toolkit: Heart online. A web resource for clinicians

Access to the right information at the right time is a challenge facing health professionals across the globe. HEART Online (www.heartonline.org.au) is a website designed to support the delivery of evidence based care for the prevention and rehabilitation of heart disease. It was developed by the Queensland Government and the National Heart Foundation of Australia and launched May 2013.

Options for rehabilitation in interlock programs

This report examines the effectiveness of national and international programs that treat and rehabilitate drivers with alcohol dependence and the criteria used to approve the removal of interlocks. The project recommends a stepped care model which requires all participants to attend education and screening and then requires participants who fail to change their behaviour to attend increasingly intensive rehabilitation programs. Failure to complete an interlock program could result in participants having their licence revoked. This project was designed to inform action 36(d) of the National Road Safety Strategy 2011-2020: Investigate the option of requiring demonstrated rehabilitation from alcohol dependence before removal of interlock conditions.

Deliverable 2: Literature review on effectiveness of alcohol treatment and determining rehabilitation. Report to Austroads (SS1755)

Austroads called for responses to a tender to investigate options for rehabilitation in alcohol interlock programs. Following successful application by the Centre for Accident Research and Road Safety – Queensland (CARRS-Q), a program of work was developed. The project has four objectives: 1. Develop a matrix outlining existing policies in national and international jurisdictions with respect to treatment and rehabilitation programs and criteria for eligibility for interlock removal; 2. Critically review the available literature with a focus on evaluation outcomes regarding the effectiveness of treatment and rehabilitation programs; 3. Analyse and assess the strengths and weaknesses of the programs/approaches identified, and; 4. Outline options with an evidence base for consideration by licensing authorities.

Static load bearing exercises during rehabilitation of individuals with transfemoral amputation fitted with osseointegrated implant: Load compliance

Osseointegration has been introduced in the orthopaedic surgery in the 1990’s in Gothenburg (Sweden). To date, there are two frequently used commercially available human implants: the OPRA (Integrum, Sweden) and ILP (Orthodynamics, Germany) systems. The rehabilitation program with both systems include some form of static load bearing exercises. These latter involved following a load progression that is monitored by the bathroom scale, providing only the load applied on the vertical axis. The loading data could be analysed through different biomechanical variables. For instance, the load compliance, corresponding to the difference between the load recommended (LR) and the load actually applied on the implant, will be presented here.

Temporal and spatial gait characteristics of transfemoral amputees fitted with osseointegrated fixation: preliminary data

The conventional method of attachment of prosthesis involves on a socket. A new method relying on osseointegrated fixation is emerging. It has significant prosthetic benefits. Only a few studies demonstrated the biomechanical benefits. The ultimate aim of this study was to characterise the functional outcome of transfemoral amputees fitted with osseointegrated fixation, which can be assess through temporal and spatial gait characteristics. The specific objective of this preliminary study was to present the key temporal and spatial gait characteristics.

Static load bearing exercises during rehabilitation of individuals with transfemoral amputation fitted with osseointegrated implant: Kinetic analysis

The desire to solve problems caused by socket prostheses in transfemoral amputees and the acquired success of osseointegration in the dental application has led to the introduction of osseointegration in the orthopedic surgery. Since its first introduction in 1990 in Gothenburg Sweden the osseointegrated (OI) orthopedic fixation has proven several benefits[1]. The surgery consists of two surgical procedures followed by a lengthy rehabilitation program. The rehabilitation program after an OI implant includes a specific training period with a short training prosthesis. Since mechanical loading is considered to be one of the key factors that influence bone mass and the osseointegration of bone-anchored implants, the rehabilitation program will also need to include some form of load bearing exercises (LBE). To date there are two frequently used commercially available human implants. We can find proof in the literature that load bearing exercises are performed by patients with both types of OI implants. We refer to two articles, a first one written by Dr. Aschoff and all and published in 2010 in the Journal of Bone and Joint Surgery.[2] The second one presented by Hagberg et al in 2009 gives a very thorough description of the rehabilitation program of TFA fitted with an OPRA implant. The progression of the load however is determined individually according to the residual skeleton’s quality, pain level and body weight of the participant.[1] Patients are using a classical bathroom weighing scale to control the load on the implant during the course of their rehabilitation. The bathroom scale is an affordable and easy-to-use device but it has some important shortcomings. The scale provides instantaneous feedback to the patient only on the magnitude of the vertical component of the applied force. The forces and moments applied along and around the three axes of the implant are unknown. Although there are different ways to assess the load on the implant for instance through inverse dynamics in a motion analysis laboratory [3-6] this assessment is challenging. A recent proof- of-concept study by Frossard et al (2009) showed that the shortcomings of the weighing scale can be overcome by a portable kinetic system based on a commercial transducer[7].

Take me seriously. Now laugh at me! How gender influences the creation of contemporary physical comedy

This paper unpacks some of the complexities of the female comic project, focussing on the creation of physical comedy, via multiple readings of the term “serious”. Does female desire to be taken seriously in the public realm compromise female-driven comedy? Historically, female seriousness has been a weapon in the hands of such female-funniness sceptics as the late Christopher Hitchens (2007), who (in)famously declared that women are too concerned with the grave importance of their reproductive responsibility to make good comedy. The dilemma is clear: for the woman attempting to elicit laughs, she’s not serious enough outside the home, and far too serious inside it.

Bits and bumps: Understanding gender in contemporary physical comedy

This study investigates how the gender of a performer affects the way they produce physical comedy in a theatrical context, framed through Kristeva's theory of abjection and Butler's notion of gender as performance. As a thesis by creative work, it produced an original piece of theatre, The Furze Family Variety Hour, which featured a male/ female comic duo, where the female performer enjoyed an equal share of the punch lines. The study generates a new understanding of how the body operates in physical comedy, namely, a system of bodily registers, as well as a new understanding of the female grotesque comic body.

Exploring physical activities in an employer-sponsored health program

This work brings a perspective from an employer-sponsored health and wellness program called Global Corporate Challenge (GCC) to the 'quantified self' research. We present preliminary findings from a study with 17 university employees who participated in the GCC. We aimed to explore how participants derived meaningfulness from their self-tracking experiences. Our findings echo the growing body of work that advocates for conceptualizing activity tracking beyond the rationalistic, data-oriented perspectives and supporting more social and lived experiences.

Exploring motivations of young adults to participate in physical activities

This paper investigates the motivations of young adults aged 18 to 24 years to participate in physical activities and how technology might best support this motivation. Motivational factors were studied through contextual interviews, an adapted cultural probe activity and a survey with a group of young adults currently active in sports. From our preliminary findings we determine that staying healthy, achieving specific goals and socialising represent key motivational factors for young adults to be active in sports, but also, that exercise is not considered a high priority in their daily lives. A link between the motivation of achieving specific goals and a technology to measure and track activities was established. The study concludes with three implications for the design of technology to motivate young adults to participate in sports.

Randomized controlled trial of an improved version of MobileMums, an intervention for increasing physical activity in women with young children

Background Women with young children (<5 years) are an important group for physical activity intervention. Purpose To evaluate the feasibility, acceptability and efficacy of MobileMums- a physical activity intervention for women with young children. Methods Women were randomized to MobileMums (n=133) or a control group (n=130). MobileMums was delivered primarily via individually-tailored text messages. Moderate to vigorous physical activity (MVPA) was measured by self-report and accelerometer at baseline, end of the intervention (13-weeks) and 6-months later (9-months). Changes were analyzed using repeated measures models. Results MobileMums was feasible to deliver and acceptable to women. Self-reported MVPA duration (minutes/week) and frequency (days/week) increased significantly post intervention (13-week intervention effect 48.5 min/week, 95%CI [13.4, 82.9] and 1.6 days/week, 95%CI [0.6, 2.6]). Intervention effects were not maintained 6-months later. No effects observed in accelerometer-derived MVPA. Conclusions MobileMums increased women’s self-reported MVPA immediately post intervention. Future investigations need to target sustained physical activity improvements.

Initial design and physical characterization of a polymeric device for osmosis-driven delayed burst delivery of vaccines

Achieving the combination of delayed and immediate release of a vaccine from a delivery device without applying external triggers remains elusive in implementing single administration vaccination strategies. Here a means of vaccine delivery is presented, which exploits osmosis to trigger delayed burst release of an active compound. Poly(-caprolactone) capsules of 2 mm diameter were prepared by dip-coating, and their burst pressure and release characteristics were evaluated. Burst pressures (in bar) increased with wall thickness (t in mm) following Pburst = 131.t + 3.4 (R2 = 0.93). Upon immersion in PBS, glucose solution-filled capsules burst after 8.7 ± 2.9 days. Copolymers of hydrophobic  -caprolactone and hydrophilic polyethylene glycol were synthesized and their physico-chemical properties were assessed. With increasing hydrophilic content, the copolymer capsules showed increased water uptake rates and maximum weight increase, while the burst release was earlier: 5.6 ± 2.0 days and 1.9 ± 0.2 days for 5 and 10 wt% polyethylene glycol, respectively. The presented approach enables the reproducible preparation of capsules with high versatility in materials and properties, while these vaccine delivery vehicles can be prepared separately from, and independently of the active compound.

Flight-training effect on the cervical muscle isometric strength of trainee pilots

External stimulus/loading initiates adaptations within skeletal muscle. It has been previously found that the cervical area has the highest loading while performing flying maneuvers under +Gz. The first purpose of this study was to examine the neck muscle response to the physical environment associated with flight training, incorporating limited exposure to +Gz force, in a Pilatus PC-9 aircraft. The second purpose was to examine the short-term range of movement (ROM) response to flight training. Isometric cervical muscle strength and ROM was monitored in 9 RAAF pilots completing an 8-mo flight-training course at Pearce Airbase in Western Australia, and in 10 controls matched for gender, age, height, and weight. Isometric cervical muscle strength and ROM were measured at baseline and at 8 mo using the multi-cervical rehabilitation unit (Hanoun Medical, Downsview, Ontario, Canada). Results indicated that an increase in pilot neck strength was limited to flexion while in a neutral position. No strength changes were recorded in any other site in the pilots or for the controls. These findings suggest that short-term exposure to the physical environment associated with flight training had a limited significant effect on increasing isometric cervical muscle strength. No significant changes were observed in pilot ROM, indicating that short-term exposure to flight does not effect ROM.