Reduction of diesel engine exhaust emissions using non-thermal plasma technology

Non-thermal plasma (NTP) is a promising candidate for controlling engine exhaust emissions. Plasma is known as the fourth state of matter, where both electrons and positive ions co-exist. Both gaseous and particle emissions of diesel exhaust undergo chemical changes when they are exposed to plasma. In this project diesel particulate matter (DPM) mitigation from the actual diesel exhaust by using NTP technology has been studied. The effect of plasma, not only on PM mass but also on PM size distribution, physico-chemical structure of PM and PM removal mechanisms, has been investigated. It was found that NTP technology can significantly reduce both PM mass and number. However, under some circumstances particles can be formed by nucleation. Energy required to create the plasma with the current technology is higher than the benchmark set by the commonly used by the automotive industry. Further research will enable the mechanism of particle creation and energy consumption to be optimised.

The primacy of vital signs – Acute care nurses’ and midwives’ use of physical assessment skills: A cross sectional study

BACKGROUND: Registered nurses and midwives play an essential role in detecting patients at risk of deterioration through ongoing assessment and action in response to changing health status. Yet, evidence suggests that clinical deterioration frequently goes unnoticed in hospitalised patients. While much attention has been paid to early warning and rapid response systems, little research has examined factors related to physical assessment skills. OBJECTIVES: To determine a minimum data set of core skills used during nursing assessment of hospitalised patients and identify nurse and workplace predictors of the use of physical assessment to detect patient deterioration. DESIGN: The study used a single-centre, cross-sectional survey design. SETTING and PARTICIPANTS: The study included 434 registered nurses and midwives (Grades 5-7) involved in clinical care of patients on acute care wards, including medicine, surgery, oncology, mental health and maternity service areas, at a 929-bed tertiary referral teaching hospital in Southeast Queensland, Australia. METHODS: We conducted a hospital-wide survey of registered nurses and midwives using the 133-item Physical Assessment Skills Inventory and the 58-item Barriers to Registered Nurses’ Use of Physical Assessment scale. Median frequency for each physical assessment skill was calculated to determine core skills. To explore predictors of core skill utilisation, backward stepwise general linear modelling was conducted. Means and regression coefficients are reported with 95% confidence intervals. A p value < .05 was considered significant for all analyses. RESULTS: Core skills used by most nurses every time they worked included assessment of temperature, oxygen saturation, blood pressure, breathing effort, skin, wound and mental status. Reliance on others and technology (F = 35.77, p < .001), lack of confidence (F = 5.52, p = .02), work area (F = 3.79, p = .002), and clinical role (F = 44.24, p < .001) were significant predictors of the extent of physical assessment skill use. CONCLUSIONS: The increasing acuity of the acute care patient plausibly warrants more than vital signs assessment; however, our study confirms nurses’ physical assessment core skill set is mainly comprised of vital signs. The focus on these endpoints of deterioration as dictated by early warning and rapid response systems may divert attention from and devalue comprehensive nursing assessment that could detect subtle changes in health status earlier in the patient's hospitalisation.

Consumer’s persistence in solving their own problem with self‐service technology

An increasing range of technology services are now offered on a self-service basis. However, problems with self-service technologies (SSTs) occur at times due to the technical error, staff error, or consumers’ own mistakes. Considering the role of consumers as co-producers in the SST context, we aim to study consumer’s behaviours, strategies, and decision making in solving their problem with SST and identify the factors contributing to their persistence in solving the problem. This study contributes to the information systems research, as it is the first study that aims to identify such a process and the factors affecting consumers’ persistence in solving their problem with SST. A focus group with user support staff has been conducted, yielding some initial results that helped to conduct the next phases of the study. Next, using Critical Incident Technique, data will be gathered through focus groups with users, diary method, and think-aloud method.

Science, Technology, Engineering, and Maths (STEM)

"Historically, science had a place in education before the time of Plato and Aristotle (e.g., Stonehenge). Technology gradually increased since early human inventions (e.g., indigenous tools and weapons), rose up dramatically through the industrial revolution and escalated exponentially during the twentieth and twenty-first centuries, particularly with the advent of the Internet. Engineering accomplishments were evident in the constructs of early civil works, including roads and structural feats such as the Egyptian pyramids. Mathematics was not as clearly defined BC (Seeds 2010), but was utilized for more than two millennia (e.g., Archimedes, Kepler, and Newton) and paved its way into education as an essential scientific tool and a way of discovering new possibilities. Hence, combining science, technology, engineering, and mathematics (STEM) areas should not come as a surprise but rather as a unique way of packaging what has been ..."--Publisher Website

Enterprise business technology governance: A validation of three technology-governance competencies for boards of directors

The competent leadership and governance of digital transformation needs to involve the board of directors. The reported lack of such capability in boards is becoming a pressing issue. Underpinning leadership in such transformation are the competencies to effectively govern Enterprise Technology (ETG). In this paper we take the position that ETG competencies are essential in boards because competent enterprise business technology governance has been shown to contribute to increased revenue, profit, and returns. We report the industry validation processes of a set of three board-of-director competencies needed for effective ETG related to strategy and planning; investment and risk; and, innovation and value creation. We conclude that gaps in board ETG competence remain.

Embracing humanity in the face of death: Why do existential concerns moderate ingroup humanization?

People humanize their ingroup to address existential concerns about their mortality, but the reasons why they do so remain ambiguous. One explanation is that people humanize their ingroup to bolster their social identity in the face of their mortality. Alternatively, people might be motivated to see their ingroup as more uniquely human (UH) to distance themselves from their corporeal “animal” nature. These explanations were tested in Australia, where social identity is tied less to UH and more to human nature (HN) which does not distinguish humans from animals. Australians attributed more HN traits to the ingroup when mortality was salient, while the attribution of UH traits remained unchanged. This indicates that the mortality-buffering function of ingroup humanization lies in reinforcing the humanness of our social identity, rather than just distancing ourselves from our animal nature. Implications for (de)humanization in intergroup relations are discussed.

Valuation of hospital bed-days released by infection control programs: A comparison of methods

We performed a contingent valuation survey to elicit the opportunity cost of bed-days consumed by healthcare-associated infections in 11 European hospitals. The opportunity cost of a bed-day was significantly lower than the accounting cost; median values were i72 and i929, respectively (P ! .001). Accounting methods overestimate the opportunity cost of bed-days...

Wearable technology: The next frontier?

The ways in which technology mediates daily activities is shifting rapidly. Global trends point toward the uptake of ambient and interactive media to create radical new ways of working, interacting and socialising. Tech giants such as Google and Apple are banking on the success of this emerging market by investing in new future focused consumer products such as Google Glass and the Apple Watch. The potential implications of ubiquitous technological interactions via tangible and ambient media have never been more real or more accessible.

Impact of technology uptake on an Australian electricity distribution network

This paper presents simulation results for future electricity grids using an agent-based model developed with MODAM (MODular Agent-based Model). MODAM is introduced and its use demonstrated through four simulations based on a scenario that expects a rise of on-site renewable generators and electric vehicles (EV) usage. The simulations were run over many years, for two areas in Townsville, Australia, capturing variability in space of the technology uptake, and for two charging methods for EV, capturing people's behaviours and their impact on the time of the peak load. Impact analyses of these technologies were performed over the areas, down to the distribution transformer level, where greater variability of their contribution to the assets peak load was observed. The MODAM models can be used for different purposes such as impact of renewables on grid sizing, or on greenhouse gas emissions. The insights gained from using MODAM for technology assessment are discussed.

Theorizing why in digital learning: Opening frontiers for inquiry and innovation with technology

Asking why is an important foundation of inquiry and fundamental to the development of reasoning skills and learning. Despite this, and despite the relentless and often disruptive nature of innovations in information and communications technology (ICT), sophisticated tools that directly support this basic act of learning appear to be undeveloped, not yet recognized, or in the very early stages of development. Why is this so? To this question, there is no single factual answer. In response, however, plausible explanations and further questions arise, and such responses are shown to be typical consequences of why-questioning. A range of contemporary scenarios are presented to highlight the problem. Consideration of the various inputs into the evolution of digital learning is introduced to provide historical context and this serves to situate further discussion regarding innovation that supports inquiry-based learning. This theme is further contextualized by narratives on openness in education, in which openness is also shown to be an evolving construct. Explanatory and descriptive contents are differentiated in order to scope out the kinds of digital tools that might support inquiry instigated by why-questioning and which move beyond the search paradigm. Probing why from a linguistic perspective reveals versatile and ambiguous semantics. The why dimension—asking, learning, knowing, understanding, and explaining why—is introduced as a construct that highlights challenges and opportunities for ICT innovation. By linking reflective practice and dialogue with cognitive engagement, this chapter points to specific frontiers for the design and development of digital learning tools, frontiers in which inquiry may find new openings for support.

Final Report: University of Technology, Sydney Student Feedback Survey Review

This evaluation was commissioned by Martin Hanlon, Director of the Planning and Quality Unit of the University of Technology, Sydney (UTS) to investigate the Student Feedback Survey (SFS) system, engagement in stakeholder feedback and provide recommendations against the Terms of Reference.

Securing Australia's future: The role of science, research and technology in lifting Australian productivity

A three-year research program funded by the Australian Research Council and conducted by the four Learned Academies through the Australian Council of Learned Academies for PMSEIC, through the Office of the Chief Scientist. Securing Australia’s Future delivers research-based evidence and findings to support policy development in areas of importance to Australia’s future.

The messaging kettle: Prototyping connection over a distance between adult children and older parents

A prototype "messaging kettle" is described. The connected kettle aims to foster communication and engagement with an older friend or relative who lives remotely, during the routine of boiling the kettle. We describe preliminary encounters and findings from demonstrating a working prototype in morning tea gatherings of people in their 50s-late 70s and from introducing it into the homes of two people in their 80s who live on another continent. Key findings are that: The concept of keeping in touch around a "habituated object" such as a kettle was well received; Simple and varied interaction modalities that allow asymmetric forms of communication are needed; Designing for use across different time zones requires attention; And, that even when augmenting a habituated object, the process of introduction, appropriation and habituation still needs significant attention and investigation.

Key beliefs influencing young drivers' engagement with social interactive technology on their Smartphones: A qualitative study

Objective The main aim of this study was to identify young drivers' underlying beliefs (i.e., behavioral, normative, and control) regarding initiating, monitoring/reading, and responding to social interactive technology (i.e., functions on a Smartphone that allow the user to communicate with other people). Method This qualitative study was a beliefs elicitation study in accordance with the Theory of Planned Behavior and sought to elicit young drivers' behavioral (i.e., advantages, disadvantages), normative (i.e., who approves, who disapproves), and control beliefs (i.e., barriers, facilitators) which underpin social interactive technology use while driving. Young drivers (N = 26) aged 17 to 25 years took part in an interview or focus group discussion. Results While differences emerged between the three behaviors of initiating, monitoring/reading, and responding for each of the behavioral, normative, and control belief categories, the strongest distinction was within the behavioral beliefs category (e.g., communicating with the person that they were on the way to meet was an advantage of initiating; being able to determine whether to respond was an advantage of monitoring/reading; and communicating with important people was an advantage of responding). Normative beliefs were similar for initiating and responding behaviors (e.g., friends and peers more likely to approve than other groups) and differences emerged for monitoring/reading (e.g., parents were more likely to approve of this behavior than initiating and responding). For control beliefs, there were differences between the beliefs regarding facilitators of these behaviors (e.g., familiar roads and conditions facilitated initiating; having audible notifications of an incoming communication facilitated monitoring/reading; and receiving a communication of immediate importance facilitated responding); however, the control beliefs that presented barriers were consistent across the three behaviors (e.g., difficult traffic/road conditions). Conclusion The current study provides an important addition to the extant literature and supports emerging research which suggests initiating, monitoring/reading, and responding may indeed be distinct behaviors with different underlying motivations.

Strength properties of composite clay balls containing additives from industry wastes as new filter media in water treatment

Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to 1100 0C at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.