671 resultados para Distribution cross
Resumo:
Direct writing melt electrospinning is an additive manufacturing technique capable of the layer-by-layer fabrication of highly ordered 3d tissue engineering scaffolds from micron-diameter fibres. The utility of these scaffolds, however, is limited by the maximum achievable height of controlled fibre deposition, beyond which the structure becomes increasingly disordered. A source of this disorder is charge build-up on the deposited polymer producing unwanted coulombic forces. In this study we introduce a novel melt electrospinning platform with dual voltage power supplies to reduce undesirable charge effects and improve fibre deposition control. We produced and characterised several 90° cross-hatched fibre scaffolds using a range of needle/collector plate voltages. Fibre thickness was found to be sensitive only to overall potential and invariant to specific tip/collector voltage. We also produced ordered scaffolds up to 200 layers thick (fibre spacing 1 mm, diameter 40 μm) and characterised structure in terms of three distinct zones; ordered, semi-ordered and disordered. Our in vitro analysis indicates successful cell attachment and distribution throughout the scaffolds, with little evidence of cell death after seven days. This study demonstrates the importance of electrostatic control for reducing destabilising polymer charge effects and enabling the fabrication of morphologically suitable scaffolds for tissue engineering.
Resumo:
This research explores how the concept of learner autonomy is understood and used in Vietnamese higher educational settings. Data were collected through interviews in Vietnamese with four university lecturers in Hanoi, Vietnam and then reported in an English language thesis. The problems confronted by the lecturers were in understanding the concept of learner autonomy, the complexities of translation equivalence for the concept from one language to another, and the impact of culture in interpreting the concept of learner autonomy. The paper concludes with recommendations for educators to be sensitive to cultural and linguistic considerations when transferring concepts from one culture to another.
Resumo:
In this thesis various schemes using custom power devices for power quality improvement in low voltage distribution network are studied. Customer operated distributed generators makes a typical network non-radial and affect the power quality. A scheme considering different algorithm of DSTATCOM is proposed for power circulation and islanded operation of the system. To compensate reactive power overflow and facilitate unity power factor, a UPQC is introduced. Stochastic analysis is carried out for different scenarios to get a comprehensive idea about a real life distribution network. Combined operation of static compensator and voltage regulator is tested for the optimum quality and stability of the system.
Resumo:
BACKGROUND: Registered nurses and midwives play an essential role in detecting patients at risk of deterioration through ongoing assessment and action in response to changing health status. Yet, evidence suggests that clinical deterioration frequently goes unnoticed in hospitalised patients. While much attention has been paid to early warning and rapid response systems, little research has examined factors related to physical assessment skills. OBJECTIVES: To determine a minimum data set of core skills used during nursing assessment of hospitalised patients and identify nurse and workplace predictors of the use of physical assessment to detect patient deterioration. DESIGN: The study used a single-centre, cross-sectional survey design. SETTING and PARTICIPANTS: The study included 434 registered nurses and midwives (Grades 5-7) involved in clinical care of patients on acute care wards, including medicine, surgery, oncology, mental health and maternity service areas, at a 929-bed tertiary referral teaching hospital in Southeast Queensland, Australia. METHODS: We conducted a hospital-wide survey of registered nurses and midwives using the 133-item Physical Assessment Skills Inventory and the 58-item Barriers to Registered Nurses’ Use of Physical Assessment scale. Median frequency for each physical assessment skill was calculated to determine core skills. To explore predictors of core skill utilisation, backward stepwise general linear modelling was conducted. Means and regression coefficients are reported with 95% confidence intervals. A p value < .05 was considered significant for all analyses. RESULTS: Core skills used by most nurses every time they worked included assessment of temperature, oxygen saturation, blood pressure, breathing effort, skin, wound and mental status. Reliance on others and technology (F = 35.77, p < .001), lack of confidence (F = 5.52, p = .02), work area (F = 3.79, p = .002), and clinical role (F = 44.24, p < .001) were significant predictors of the extent of physical assessment skill use. CONCLUSIONS: The increasing acuity of the acute care patient plausibly warrants more than vital signs assessment; however, our study confirms nurses’ physical assessment core skill set is mainly comprised of vital signs. The focus on these endpoints of deterioration as dictated by early warning and rapid response systems may divert attention from and devalue comprehensive nursing assessment that could detect subtle changes in health status earlier in the patient's hospitalisation.
Resumo:
Objectives Medical and dental students experience poor psychological well-being relative to their peers. This study aimed to assess the psychological well-being among medical and dental students in Saudi Arabia, identify the high-risk groups and assess the association between the psychological well-being and the academic performance. Methods In this cross-sectional study, 422 preclinical medical and dental students at Umm Al-Qura University, Saudi Arabia, were recruited to assess their depression, anxiety, stress, self-efficacy and satisfaction with life levels using 21-items Depression Anxiety Stress Scale (DASS-21), General Self-Efficacy (GSE) scale and Satisfaction With Life Scale (SWLS). Students’ academic weighted grades were obtained later. Descriptive statistics and univariate general linear model were used to analyse data. Results High levels of depression (69.9%), anxiety (66.4%) and stress (70.9%) were indicated, whereas self-efficacy (mean = 27.22, sd = 4.85) and life satisfaction (mean = 23.60, sd = 6.37) were within the normal range. Female medical students had higher psychological distress in contrast to dental students. In general, third-year students were more depressed and stressed in comparison with second-year students, except for stress among dental students. Moreover, all females had higher self-efficacy than males. Life satisfaction was higher within the second-year and high family income students. Depression was the only psychological variable correlated with the academic performance. Conclusion High levels of psychological distress were found. Female medical students had higher psychological distress than males, whereas male dental students had higher distress than female. Medical students at third year were more depressed and stressed. Dental students were more depressed in the third year, but more stressed in the second year. Attention should be directed towards reducing the alarming levels of depression, anxiety and stress among medical and dental students.
Resumo:
Background: Successful management of atopic dermatitis poses a significant and ongoing challenge to parents of affected children. Despite frequent reports of child behaviour problems and parenting difficulties, there is a paucity of literature examining relationships between child behaviour and parents' confidence and competence with treatment. Objectives: To examine relationships between child, parent, and family variables, parents' self-efficacy for managing atopic dermatitis, self-reported performance of management tasks, observed competence with providing treatment, and atopic dermatitis severity. Design: Cross-sectional study design. Participants A sample of 64 parent-child dyads was recruited from the dermatology clinic of a paediatric tertiary referral hospital in Brisbane, Australia. Methods: Parents completed self-report questionnaires examining child behaviour, parents' adjustment, parenting conflict, parents' relationship satisfaction, and parents' self-efficacy and self-reported performance of key management tasks. Severity of atopic dermatitis was assessed using the Scoring Atopic Dermatitis index. A routine home treatment session was observed, and parents' competence in carrying out the child's treatment assessed. Results: Pearson's and Spearman's correlations identified significant relationships (p< .05) between parents' self-efficacy and disease severity, child behaviour difficulties, parent depression and stress, parenting conflict, and relationship satisfaction. There were also significant relationships between each of these variables and parents' self-reported performance of management tasks. More profound child behaviour difficulties were associated with more severe atopic dermatitis and greater parent stress. Using multiple linear regressions, significant proportions of variation in parents' self-efficacy and self-reported task performance were explained by child behaviour difficulties and parents' formal education. Self-efficacy emerged as a likely mediator for relationships between both child behaviour and parents' education, and self-reported task performance. Direct observation of treatment sessions revealed strong relationships between parents' treatment competence and parents' self-efficacy, outcome expectations, and self-reported task performance. Less competent task performance was also associated with greater parent-reported child behaviour difficulties, parent depression and stress, parenting conflict, and relationship dissatisfaction. Conclusion: This study revealed the importance of child behaviour to parents' confidence and practices in the context of atopic dermatitis management. Children with more severe atopic dermatitis are at risk of presenting with challenging behaviour problems and their parents struggle to manage the condition successfully.
Resumo:
Final report for the Australian Government Office for Learning and Teaching. "This seed project ‘Design thinking frameworks as transformative cross-disciplinary pedagogy’ aimed to examine the way design thinking strategies are used across disciplines to scaffold the development of student attributes in the domain of problem solving and creativity in order to enhance the nation’s capacity for innovation. Generic graduate attributes associated with innovation, creativity and problem solving are considered to be amongst the most important of all targeted attributes (Bradley Review of Higher Education, 2009). The project also aimed to gather data on how academics across disciplines conceptualised design thinking methodologies and strategies. Insights into how design thinking strategies could be embedded at the subject level to improve student outcomes were of particular interest in this regard. A related aim was the investigation of how design thinking strategies could be used by academics when designing new and innovative subjects and courses." Case Study 3: QUT Community Engaged Learning Lab Design Thinking/Design Led Innovation Workshop by Natalie Wright Context "The author, from the discipline area of Interior Design in the QUT School of Design, Faculty of Creative Industries, is a contributing academic and tutor for The Community Engaged Learning Lab, which was initiated at Queensland University of Technology in 2012. The Lab facilitates university-wide service-learning experiences and engages students, academics, and key community organisations in interdisciplinary action research projects to support student learning and to explore complex and ongoing problems nominated by the community partners. In Week 3, Semester One 2013, with the assistance of co-lead Dr Cara Wrigley, Senior Lecturer in Design led Innovation, a Masters of Architecture research student and nine participating industry-embedded Masters of Research (Design led Innovation) facilitators, a Design Thinking/Design led Innovation workshop was conducted for the Community Engaged Learning Lab students, and action research outcomes published at 2013 Tsinghua International Design Management Symposium, December 2013 in Shenzhen, China (Morehen, Wright, & Wrigley, 2013)."
Resumo:
Long-term measurements of particle number size distribution (PNSD) produce a very large number of observations and their analysis requires an efficient approach in order to produce results in the least possible time and with maximum accuracy. Clustering techniques are a family of sophisticated methods which have been recently employed to analyse PNSD data, however, very little information is available comparing the performance of different clustering techniques on PNSD data. This study aims to apply several clustering techniques (i.e. K-means, PAM, CLARA and SOM) to PNSD data, in order to identify and apply the optimum technique to PNSD data measured at 25 sites across Brisbane, Australia. A new method, based on the Generalised Additive Model (GAM) with a basis of penalised B-splines, was proposed to parameterise the PNSD data and the temporal weight of each cluster was also estimated using the GAM. In addition, each cluster was associated with its possible source based on the results of this parameterisation, together with the characteristics of each cluster. The performances of four clustering techniques were compared using the Dunn index and Silhouette width validation values and the K-means technique was found to have the highest performance, with five clusters being the optimum. Therefore, five clusters were found within the data using the K-means technique. The diurnal occurrence of each cluster was used together with other air quality parameters, temporal trends and the physical properties of each cluster, in order to attribute each cluster to its source and origin. The five clusters were attributed to three major sources and origins, including regional background particles, photochemically induced nucleated particles and vehicle generated particles. Overall, clustering was found to be an effective technique for attributing each particle size spectra to its source and the GAM was suitable to parameterise the PNSD data. These two techniques can help researchers immensely in analysing PNSD data for characterisation and source apportionment purposes.
Resumo:
An expanding education market targeted through ‘bridging material’ enabling cineliteracies has the potential to offer Australian producers with increased distribution opportunities, educators with targeted teaching aids and students with enhanced learning outcomes. For Australian documentary producers, the key to unlocking the potential of the education sector is engaging with its curriculum-based requirements at the earliest stages of pre-production. Two key mechanisms can lead to effective educational engagement; the established area of study guides produced in association with the Australian Teachers of Media (ATOM) and the emerging area of philanthropic funding coordinated by the Documentary Australia Foundation (DAF). DAF has acted as a key financial and cultural philanthropic bridge between individuals, foundations, corporations and the Australian documentary sector for over 14 years. DAF does not make or commission films but through management and receipt of grants and donations provides ‘expertise, information, guidance and resources to help each sector work together to achieve their goals’. The DAF application process also requires film-makers to detail their ‘Education and Outreach Strategy’ for each film with 582 films registered and 39 completed as of June 2014. These education strategies that can range from detailed to cursory efforts offer valuable insights into the Australian documentary sector's historical and current expectations of education as a receptive and dynamic audience for quality factual content. A recurring film-maker education strategy found in the DAF data is an engagement with ATOM to create a study guide for their film. This study guide then acts as a ‘bridging material’ between content and education audience. The frequency of this effort suggests these study guides enable greater educator engagement with content and increased interest and distribution of the film to educators. The paper Education paths for documentary distribution: DAF, ATOM and the study guides that bind them will address issues arising out of the changing needs of the education sector and the impact targeting ‘cineliteracy’ outcomes may have for Australian documentary distribution.
Resumo:
This thesis provides the first inquiry into the use of creative activities in dementia care in residential aged care facilities in Australia. The study used descriptive method design, incorporating a mix of quantitative and qualitative approaches to explore the incidence and the characteristics of these activities from the carers' perspective. Information about the use of creative activities and the appreciation of these activities by residents and carers is essential to the provision of dementia care and treatment to improve the quality of life of people with dementia.
Resumo:
The Internet has been shown to positively enhance internationalisation for SMEs, but scant empirical testing limits our understanding of the explicit impact of the Internet on firm internationalisation. This paper highlights key areas where the integration of the Internet can be leveraged through Internet-related capabilities within the internationalisation of the firm. Specifically, this study investigates how Internet marketing capabilities play a role in altering international information availability, international strategic orientation, and international business network relationships. This study provides evidence, indicating that these key relationships may vary between countries. To examine these key relationships this study utilises draws from data small and medium sized enterprises (SMEs) in three export intensive markets; Australia (215 international SMEs), Chile (204 international SMEs) and Taiwan (130 international SMEs); and tests a conceptual model through structural equation modelling. Results from the data show the impact of Internet marketing capabilities in positively impacting traditional internationalisation elements, which varies between countries. That is, our findings highlight the international business network relationships in Australia and Taiwan are directly impacted by Internet marketing capabilities, but not in Chile. We offer some insight into why we see variance across comparative exporting countries in how they leverage new technological capabilities for internationalisation and firm performance.
Resumo:
Objectives To determine the frequency and types of stressful events experienced by urban Aboriginal and Torres Strait Islander children, and to explore the relationship between these experiences and the children’s physical health and parental concerns about their behaviour and learning ability. Design, setting and participants Cross-sectional study of Aboriginal and Torres Strait Islander children aged ≤ 14 years presenting to an urban Indigenous primary health care service in Brisbane for annual child health checks between March 2007 and March 2010. Main outcome measures Parental or carer report of stressful events ever occurring in the family that may have affected the child. Results Of 344 participating children, 175 (51%) had experienced at least one stressful event. Reported events included the death of a family member or close friend (40; 23%), parental divorce or separation (28; 16%), witness to violence or abuse (20; 11%), or incarceration of a family member (7; 4%). These children were more likely to have parents or carers concerned about their behaviour (P < 0.001) and to have a history of ear (P < 0.001) or skin (P = 0.003) infections. Conclusions Children who had experienced stressful events had poorer physical health and more parental concern about behavioural issues than those who had not. Parental disclosure in the primary health care setting of stressful events that have affected the child necessitates appropriate medical, psychological or social interventions to ameliorate both the immediate and potential lifelong negative impact. However, treating the impact of stressful events is insufficient without dealing with the broader political and societal issues that result in a clustering of stressful events in the Aboriginal and Torres Strait Islander population.
Resumo:
This thesis is a comparative study of the modelling of mechanical behaviours of F-actin cytoskeleton which is an important structural component in living cells. A new granular model was developed for F-actin cytoskeleton based on the concept of multiscale modelling. This framework overcomes difficulties encountered in physical modelling of cytoskeleton in conventional continuum mechanics modelling, and the computational challenges in all-atom molecular dynamics simulation. The thermostat algorithm was further modified to better predict the thermodynamic properties of F-actin cytoskeleton in modelling. This multiscale modelling framework was applied in explaining the physical mechanisms of cytoskeleton responses to external mechanical loads.
Resumo:
Overvoltage and overloading due to high utilization of PVs are the main power quality concerns for future distribution power systems. This paper proposes a distributed control coordination strategy to manage multiple PVs within a network to overcome these issues. PVs reactive power is used to deal with over-voltages and PVs active power curtailment are regulated to avoid overloading. The proposed control structure is used to share the required contribution fairly among PVs, in proportion to their ratings. This approach is examined on a practical distribution network with multiple PVs.
Resumo:
Background Internet-based surveillance systems provide a novel approach to monitoring infectious diseases. Surveillance systems built on internet data are economically, logistically and epidemiologically appealing and have shown significant promise. The potential for these systems has increased with increased internet availability and shifts in health-related information seeking behaviour. This approach to monitoring infectious diseases has, however, only been applied to single or small groups of select diseases. This study aims to systematically investigate the potential for developing surveillance and early warning systems using internet search data, for a wide range of infectious diseases. Methods Official notifications for 64 infectious diseases in Australia were downloaded and correlated with frequencies for 164 internet search terms for the period 2009–13 using Spearman’s rank correlations. Time series cross correlations were performed to assess the potential for search terms to be used in construction of early warning systems. Results Notifications for 17 infectious diseases (26.6%) were found to be significantly correlated with a selected search term. The use of internet metrics as a means of surveillance has not previously been described for 12 (70.6%) of these diseases. The majority of diseases identified were vaccine-preventable, vector-borne or sexually transmissible; cross correlations, however, indicated that vector-borne and vaccine preventable diseases are best suited for development of early warning systems. Conclusions The findings of this study suggest that internet-based surveillance systems have broader applicability to monitoring infectious diseases than has previously been recognised. Furthermore, internet-based surveillance systems have a potential role in forecasting emerging infectious disease events, especially for vaccine-preventable and vector-borne diseases