779 resultados para structured-pragmaticsituational (SPS) approach
Resumo:
This paper examines social change following the recent introduction of mobile telephony into rural communities in Papua New Guinea (PNG). It presents the findings of substantial fieldwork conducted in 2009, and suggests ways in which the new technology is already changing people’s lives and relationships. The paper identifies the roles of mobile telephones in two communities, the changes taking place, and how villagers are responding to them. Comparison of the two villages is strategic as it highlights similarities in perceptions of mobile phones in these two very different settings. An ethnographic approach is adopted, situated within an interpretative methodology. Data collection methods include semi-structured interviews, orally-administered surveys and participant observation. The theoretical lens is focused on the ‘communicative ecology’ concept, which stems from the communication research tradition. This research is significant as it addresses changes currently occurring in the communication methods of whole communities.
Resumo:
Standardised testing does not recognise the creativity and skills of marginalised youth. Young people who come to the Edmund Rice Education Australia Flexible Learning Centre Network (EREAFLCN) in Australia arrive with forms of cultural capital that are not valued in the field of education and employment. This is not to say that young people‟s different modes of cultural capital have no value, but rather that such funds of knowledge, repertoires and cultural capital are not valued by the powerful agents in educational and employment fields. The forms of cultural capital which are valued by these institutions are measurable in certain structured formats which are largely inaccessible for what is seen in Australia to be a growing segment of the community. How then can the inherent value of traditionally unorthodox - yet often intricate, adroit, ingenious, and astute - versions of cultural capital evident in the habitus of many young people be made to count, be recognised, be valuated? Can a process of educational assessment be used as a marketplace, a field of capital exchange? This paper reports on the development of an innovative approach to assessment in an alternative education institution designed for the re-engagement of „at risk‟ youth who have left formal schooling. In order to capture the broad range of students‟ cultural and social capital, an electronic portfolio system (EPS) is under trial. The model draws on categories from sociological models of capital and reconceptualises the eportfolio as a sociocultural zone of learning and development. Initial results from the trial show a general tendency towards engagement with the EPS and potential for the attainment of socially valued cultural capital in the form of school credentials.
Resumo:
The improvement and optimization of business processes is one of the top priorities in an organization. Although process analysis methods are mature today, business analysts and stakeholders are still hampered by communication issues. That is, analysts cannot effectively obtain accurate business requirements from stakeholders, and stakeholders are often confused about analytic results offered by analysts. We argue that using a virtual world to model a business process can benefit communication activities. We believe that virtual worlds can be used as an efficient model-view approach, increasing the cognition of business requirements and analytic results, as well as the possibility of business plan validation. A healthcare case study is provided as an approach instance, illustrating how intuitive such an approach can be. As an exploration paper, we believe that this promising research can encourage people to investigate more research topics in the interdisciplinary area of information system, visualization and multi-user virtual worlds.
Resumo:
Context-based chemistry education aims to improve student interest and motivation in chemistry by connecting canonical chemistry concepts with real-world contexts. Implementation of context-based chemistry programmes began 20 years ago in an attempt to make the learning of chemistry meaningful for students. This paper reviews such programmes through empirical studies on six international courses, ChemCom (USA), Salters (UK), Industrial Science (Israel), Chemie im Kontext (Germany), Chemistry in Practice (The Netherlands) and PLON (The Netherlands). These studies are categorised through emergent characteristics of: relevance, interest/attitudes motivation and deeper understanding. These characteristics can be found to an extent in a number of other curricular initiatives, such as science-technology-society approaches and problem-based learning or project based science, the latter of which often incorporates an inquiry-based approach to science education. These initiatives in science education are also considered with a focus on the characteristics of these approaches that are emphasised in context-based education. While such curricular studies provide a starting point for discussing context-based approaches in chemistry, to advance our understanding of how students connect canonical science concepts with the real-world context, a new theoretical framework is required. A dialectical sociocultural framework originating in the work of Vygotsky is used as a referent for analysing the complex human interactions that occur in context-based classrooms, providing teachers with recent information about the pedagogical structures and resources that afford students the agency to learn.
Resumo:
This paper provides a critique of the Water Sensitive Urban Design (WSUD) paradigm by discussing its congruence with an established sustainable design principle called 'whole system design'. It was found that WSUD is congruent with the whole system design approach as a philosophy, but not in practice. Future improvement of WSUD practice may depend on the adoption of a front-loaded, teamwork-based design and planning process that is embedded in the principle of whole system design.
Resumo:
Using a critical ethnographic approach this study investigates the potential for multiple voices of experience, of educators, designers/architects, education facility planners and students/learners, to influence creatively the designing of school libraries. School libraries are considered as social and cultural entities within the contexts of school life and of wider society. It is proposed that school library designing is a social interaction of concern to those influenced by its practices and outcomes. School library designing is therefore of significance to educators and students as well as to those with professionally accredited involvement in school library designing, such as designers/architects and education facility planners. The study contends that current approaches to educational space designing, including school libraries, amplify the voices of accredited designers and diminish or silence the voices of the user participants. The study is conceptualised as creative processes of discovery, through which attention is paid to the voices of experience of user and designer participants, and is concerned with their understandings and experiences of school libraries and their understandings and experiences of designing. Grounded theory coding (Charmaz) is used for initial categorising of interview data. Critical discourse analysis (CDA, Fairclough) is used as analytical tool for reflection on the literature and for analysis of the small stories gathered through semi-structured interviews, field observations and documents. The critical interpretive stance taken through CDA, enables discussions of aspects of power associated with the understandings and experiences of participants, and for recognition of creative possibilities and creative influence within and beyond current conditions. Through an emphasis on prospects for educators and students as makers of the spaces and places of learning, in particular in school libraries, the study has the potential to inform education facility designing practices and design participant relationships, and to contribute more broadly to knowledge in the fields of education, design, architecture, and education facility planning.
Resumo:
Background: Integrating 3D virtual world technologies into educational subjects continues to draw the attention of educators and researchers alike. The focus of this study is the use of a virtual world, Second Life, in higher education teaching. In particular, it explores the potential of using a virtual world experience as a learning component situated within a curriculum delivered predominantly through face-to-face teaching methods. Purpose: This paper reports on a research study into the development of a virtual world learning experience designed for marketing students taking a Digital Promotions course. The experience was a field trip into Second Life to allow students to investigate how business branding practices were used for product promotion in this virtual world environment. The paper discusses the issues involved in developing and refining the virtual course component over four semesters. Methods: The study used a pedagogical action research approach, with iterative cycles of development, intervention and evaluation over four semesters. The data analysed were quantitative and qualitative student feedback collected after each field trip as well as lecturer reflections on each cycle. Sample: Small-scale convenience samples of second- and third-year students studying in a Bachelor of Business degree, majoring in marketing, taking the Digital Promotions subject at a metropolitan university in Queensland, Australia participated in the study. The samples included students who had and had not experienced the field trip. The numbers of students taking part in the field trip ranged from 22 to 48 across the four semesters. Findings and Implications: The findings from the four iterations of the action research plan helped identify key considerations for incorporating technologies into learning environments. Feedback and reflections from the students and lecturer suggested that an innovative learning opportunity had been developed. However, pedagogical potential was limited, in part, by technological difficulties and by student perceptions of relevance.
Resumo:
Nursing personnel are consistently identified as one of the occupational groups most at risk of work-related musculoskeletal disorders. During the moving and handling of bariatric patients, the weight of the patient combined with atypical body mass contributes to a significant risk of injury to the care provider and patient. This is further compounded by the shape, mobility and co-operation of the patient. The aim of this study was determine user experiences and design requirements for mobile hoists with bariatric patients. Structured interviews were conducted with six experienced injury management staff from the Manual Task Services department of three hospitals in Adelaide, South Australia. All staff had experience in patient handling, the use of patient handling equipment and the provision of patient handling training. A series of open-ended questions were structured around five main themes: 1) patient factors; 2) building/vehicle space and design; 3) equipment and furniture; 4) communication; and 5) staff issues. Questions focussed on the use of mobile hoists for lifting and transferring bariatric patients. Interviews were supplemented with a walk-through of the hospital to view the types of mobile hoists used, and the location and storage of equipment. Across the three hospitals there were differing classification systems to define bariatric patients. Ensuring patient dignity, respect and privacy were viewed as important in the management and rehabilitation of bariatric patients. Storage and space constraints were considered factors restricting the use of mobile floor hoists, with ceiling hoists being the preferred method for patient transfers. When using mobile floor hoists, the forces required to push, pull and manoeuvre, as well as sudden unstable movements of the hoist were considered important risks factors giving rise to a risk of injury to the care provider. Record keeping and purchasing policies appeared to inhibit the effective use of patient handling equipment. The moving and handling of bariatric patients presents complex and challenging issues. A co-ordinated and collaborative approach for moving and handling bariatric patients is needed across the range of care providers. Designers must consider both user and patient requirements.
Resumo:
This paper presents an innovative prognostics model based on health state probability estimation embedded in the closed loop diagnostic and prognostic system. To employ an appropriate classifier for health state probability estimation in the proposed prognostic model, the comparative intelligent diagnostic tests were conducted using five different classifiers applied to the progressive fault levels of three faults in HP-LNG pump. Two sets of impeller-rubbing data were employed for the prediction of pump remnant life based on estimation of discrete health state probability using an outstanding capability of SVM and a feature selection technique. The results obtained were very encouraging and showed that the proposed prognosis system has the potential to be used as an estimation tool for machine remnant life prediction in real life industrial applications.
Resumo:
Society faces an unprecedented global education challenge to equip professionals with the knowledge and skills to address emerging 21st Century challenges, spanning climate change mitigation through to adaptation measures to deal with issues such as temperature and sea level rise, and diminishing fresh water and fossil fuel reserves. This paper discusses the potential for systemic and synergistic integration of curriculum with campus operations to accelerate curriculum renewal towards ESD, drawing on the authors' experiences within engineering education. The paper begins by a providing a brief overview of the need for timely curriculum renewal towards ESD in tertiary education. The paper then highlights some examples of academic barriers that need to be overcome for integration efforts to be successful, and opportunities for promoting the benefits of such integration. The paper concludes by discussing the rational for planning green campus initiatives within a larger system of curriculum renewal considerations, including awareness raising and developing a common understanding, identifying and mapping graduate attributes, curriculum auditing, content development and strategic renewal, and bridging and outreach.
Resumo:
The current regulatory approach to coal seam gas projects in Queensland is based on the philosophy of adaptive environmental management. This method of “learning by doing” is implemented in Queensland primarily through the imposition of layered monitoring and reporting duties on the coal seam gas operator alongside obligations to compensate and “make good” harm caused. The purpose of this article is to provide a critical review of the Queensland regulatory approach to the approval and minimisation of adverse impacts from coal seam gas activities. Following an overview of the hallmarks of an effective adaptive management approach, this article begins by addressing the mosaic of approval processes and impact assessment regimes that may apply to coal seam gas projects. This includes recent Strategic Cropping Land reforms. This article then turns to consider the preconditions for land access in Queensland and the emerging issues for landholders relating to the negotiation of access and compensation agreements. This article then undertakes a critical review of the environmental duties imposed on coal seam gas operators relating to hydraulic fracturing, well head leaks, groundwater management and the disposal and beneficial use of produced water. Finally, conclusions are drawn regarding the overall effectiveness of the Queensland framework and the lessons that may be drawn from Queensland’s adaptive environmental management approach.
Resumo:
Accurate and detailed road models play an important role in a number of geospatial applications, such as infrastructure planning, traffic monitoring, and driver assistance systems. In this thesis, an integrated approach for the automatic extraction of precise road features from high resolution aerial images and LiDAR point clouds is presented. A framework of road information modeling has been proposed, for rural and urban scenarios respectively, and an integrated system has been developed to deal with road feature extraction using image and LiDAR analysis. For road extraction in rural regions, a hierarchical image analysis is first performed to maximize the exploitation of road characteristics in different resolutions. The rough locations and directions of roads are provided by the road centerlines detected in low resolution images, both of which can be further employed to facilitate the road information generation in high resolution images. The histogram thresholding method is then chosen to classify road details in high resolution images, where color space transformation is used for data preparation. After the road surface detection, anisotropic Gaussian and Gabor filters are employed to enhance road pavement markings while constraining other ground objects, such as vegetation and houses. Afterwards, pavement markings are obtained from the filtered image using the Otsu's clustering method. The final road model is generated by superimposing the lane markings on the road surfaces, where the digital terrain model (DTM) produced by LiDAR data can also be combined to obtain the 3D road model. As the extraction of roads in urban areas is greatly affected by buildings, shadows, vehicles, and parking lots, we combine high resolution aerial images and dense LiDAR data to fully exploit the precise spectral and horizontal spatial resolution of aerial images and the accurate vertical information provided by airborne LiDAR. Objectoriented image analysis methods are employed to process the feature classiffcation and road detection in aerial images. In this process, we first utilize an adaptive mean shift (MS) segmentation algorithm to segment the original images into meaningful object-oriented clusters. Then the support vector machine (SVM) algorithm is further applied on the MS segmented image to extract road objects. Road surface detected in LiDAR intensity images is taken as a mask to remove the effects of shadows and trees. In addition, normalized DSM (nDSM) obtained from LiDAR is employed to filter out other above-ground objects, such as buildings and vehicles. The proposed road extraction approaches are tested using rural and urban datasets respectively. The rural road extraction method is performed using pan-sharpened aerial images of the Bruce Highway, Gympie, Queensland. The road extraction algorithm for urban regions is tested using the datasets of Bundaberg, which combine aerial imagery and LiDAR data. Quantitative evaluation of the extracted road information for both datasets has been carried out. The experiments and the evaluation results using Gympie datasets show that more than 96% of the road surfaces and over 90% of the lane markings are accurately reconstructed, and the false alarm rates for road surfaces and lane markings are below 3% and 2% respectively. For the urban test sites of Bundaberg, more than 93% of the road surface is correctly reconstructed, and the mis-detection rate is below 10%.
Resumo:
The paper introduces the underlying principles and the general features of a meta-method (MAP method) developed as part of and used in various research, education and professional development programmes at ESC Lille. This method aims at providing effective and efficient structure and process for acting and learning in various complex, uncertain and ambiguous managerial situations (projects, programmes, portfolios). The paper is developed around three main parts. First, I suggest revisiting the dominant vision of the project management knowledge field, based on the assumptions they are not addressing adequately current business and management contexts and situations, and that competencies in management of entrepreneurial activities are the sources of creation of value for organisations. Then, grounded on the former developments, I introduce the underlying concepts supporting MAP method seen as a ‘convention generator’ and how this meta method inextricably links learning and practice in addressing managerial situations. Finally, I briefly describe an example of application, illustrating with a case study how the method integrates Project Management Governance, and give few examples of use in Management Education and Professional Development.
Resumo:
The purpose of this paper is to show how project management governance is addressed through the use of a specific meta-method. Governance is defined here on two criteria: accountability and performance. Accountability is promoted through transparency and performance is promoted by responsive and responsible decision-making. According to a systemic perspective, transparency and decision-making involve having information, tacit or explicit knowledge, as well as understanding of the context, the different parameters and variables, their interaction and conditions of change. Although this method of methods was built according a heuristic process involving 25 years of various researches and consulting activities, it seems appropriate to draw its foundations. I clarify first my epistemological position and the notion of project and project management, as Art and Science. This lead me to define a "Be" / "Have" posture to this regards. Then, the main theoretical roots of MAP Method are exposed: Boisot' s Social Learning Cycle, Praxeology and Theory of Convention. Then we introduced the main characteristics of the method and the 17 methods and tools constituting MAP "tool box", thus with regard to the project management governance perspective. Finally, I discuss the integration of two managerial modes (operational and project modes) and the consequence in term of governance in a specific socio-techno-economic project/context ecosystem.
Resumo:
Foreword: In this paper I call upon a praxiological approach. Praxeology (early alteration of praxiology) is the study of human action and conduct. The name praxeology/praxiologyakes is root in praxis, Medieval Latin, from Greek, doing, action, from prassein to do, practice (Merriam-Webster Dictionary). Having been involved in project management education, research and practice for the last twenty years, I have constantly tried to improve and to provide a better understanding/knowledge of the field and related practice, and as a consequence widen and deepen the competencies of the people I was working with (and my own competencies as well!), assuming that better project management lead to more efficient and effective use of resources, development of people and at the end to a better world. For some time I have perceived a need to clarify the foundations of the discipline of project management, or at least elucidate what these foundations could be. An immodest task, one might say! But not a neutral one! I am constantly surprised by the way the world (i.e., organizations, universities, students and professional bodies) sees project management: as a set of methods, techniques, tools, interacting with others fields – general management, engineering, construction, information systems, etc. – bringing some effective ways of dealing with various sets of problems – from launching a new satellite to product development through to organizational change.