Intimate relationship status variations in violence against women : urban, suburban, and rural differences

Woman abuse varies across intimate relationship categories (e.g., marriage, divorce, separation). However, it is unclear whether relationship status variations in violence against women differ across urban, suburban, and rural areas. We test the hypothesis that rural females, regardless of their intimate partner relationship status, are at higher risk of intimate violence than their urban and suburban counterparts. Results indicate that marital status is an important aspect of the relationship between intimate victimization and geographic area and that rural divorced and separated females are victimized at rates exceeding their urban counterparts.

Rural masculinities and the internalisation of violence in agricultural communities

This article is based on research we conducted in two agricultural communities as part of a broader study that included mining communities in rural Australia. The data from the agricultural locations tell a different story to that of the mining communities. In the latter, alcohol-fuelled, male-on-male assaults in public places caused considerable anxiety among informants. By contrast, people in the agricultural communities seemed more troubled by hidden violent harms which were largely privatised and individualised, including self-harm, suicide, isolation and threats to men’s general wellbeing and mental health; domestic violence; and other forms of violence largely unreported and thus unacknowledged within the wider community (including sexual assault and bullying linked to homophobia). We argue one reason for the different pattern in the agricultural communities is the decline of pub(lic) masculinity, and with this, the increasing isolation of rural men and the increasing propensity to internalise violence. We argue that the relatively high rates of suicide in agricultural communities experiencing rural decline are symptomatic of the internalisation of violence.

High-efficiency silencing of a β-glucuronidase gene in rice is correlated with repetitive transgene structure but is independent of DNA methylation

Two transgenic callus lines of rice, stably expressing a β-glucuronidase (GUS) gene, were supertransformed with a set of constructs designed to silence the resident GUS gene. An inverted-repeat (i/r) GUS construct, designed to produce mRNA with self-complementarity, was much more effective than simple sense and antisense constructs at inducing silencing. Supertransforming rice calluses with a direct-repeat (d/r) construct, although not as effective as those with the i/r construct, was also substantially more effective in silencing the resident GUS gene than the simple sense and antisense constructs. DNA hybridisation analyses revealed that every callus line supertransformed with either simple sense or antisense constructs, and subsequently showing GUS silencing, had the silence-inducing transgenes integrated into the plant genome in inverted-repeat configurations. The silenced lines containing i/r and d/r constructs did not necessarily have inverted-repeat T-DNA insertions. There was significant methylation of the GUS sequences in most of the silenced lines but not in the unsilenced lines. However, demethylation treatment of silenced lines with 5-azacytidine did not reverse the post-transcriptional gene silencing (PTGS) of GUS. Whereas the levels of RNA specific to the resident GUS gene were uniformly low in the silenced lines, RNA specific to the inducer transgenes accumulated to a substantial level, and the majority of the i/r RNA was unpolyadenylated. Altogether, these results suggest that both sense- and antisense-mediated gene suppression share a similar molecular basis, that unpolyadenylated RNA plays an important role in PTGS, and that methylation is not essential for PTGS.

A satellite RNA of barley yellow dwarf virus contains a novel hammerhead structure in the self-cleavage domain

An RNA molecule with properties of a satellite RNA was found in an isolate of barley yellow dwarf virus (BYDV), RPV serotype. It is 322 nucleotides long, single-stranded, and does not hybridize to the viral genome. Dimers of the RNA, which presumably represent replicative intermediates, were able to self-cleave into monomers. In vitro transcripts from cDNA clones were capable of self-cleavage in both the plus (encapsidated) and minus orientations. The sequence flanking the minus strand cleavage site contained a consensus " hammerhead" structure, similar to those found in other self-cleaving satellite RNAs. Although related to the hammerhead structure, sequences flanking the plus strand termini showed differences from the consensus and may be folded into a different structure containing a pseudoknot. © 1991.

Front-line workers as intermediaries : the changing landscape of disability and employment services in Australia

Recent welfare reform in Australia has been constructed around the now-familiar principle of paid work and willingness to work as the fundamental marker of social citizenship. Beginning with the long-term unemployed in Australia in the mid 1990s, the scope of welfare reform has now extended to include people with a disability – which is a category of income support that has been growing in Australia. From the national government’s point of view this growth is a financial concern as it seeks to move as many people as possible into paid work to support the costs of an ageing population (DEWR, 2005). In doing so, the government has changed the meaning of disability in terms of eligibility for financial support from the state, and at the same time redefined the role of people with a disability with regard to work, and the role of the state with regard to the disabled. This has been a matter of some political contention in Australia.

Voltage unbalance improvement in low voltage residential feeders with rooftop PVs using custom power devices

Voltage unbalance is a major power quality problem in low voltage residential feeders due to the random location and rating of single-phase rooftop photovoltaic cells (PV). In this paper, two different improvement methods based on the application of series (DVR) and parallel (DSTATCOM) custom power devices are investigated to improve the voltage unbalance problem in these feeders. First, based on the load flow analysis carried out in MATLAB, the effectiveness of these two custom power devices is studied vis-à-vis the voltage unbalance reduction in urban and semi-urban/rural feeders containing rooftop PVs. Their effectiveness is studied from the installation location and rating points of view. Later, a Monte Carlo based stochastic analysis is carried out to investigate their efficacy for different uncertainties of load and PV rating and location in the network. After the numerical analyses, a converter topology and control algorithm is proposed for the DSTATCOM and DVR for balancing the network voltage at their point of common coupling. A state feedback control, based on pole-shift technique, is developed to regulate the voltage in the output of the DSTATCOM and DVR converters such that the voltage balancing is achieved in the network. The dynamic feasibility of voltage unbalance and profile improvement in LV feeders, by the proposed structure and control algorithm for the DSTATCOM and DVR, is verified through detailed PSCAD/EMTDC simulations.

Advantages of exploiting projection structure for segmenting dense 3D point clouds

Timely and comprehensive scene segmentation is often a critical step for many high level mobile robotic tasks. This paper examines a projected area based neighbourhood lookup approach with the motivation towards faster unsupervised segmentation of dense 3D point clouds. The proposed algorithm exploits the projection geometry of a depth camera to find nearest neighbours which is time independent of the input data size. Points near depth discontinuations are also detected to reinforce object boundaries in the clustering process. The search method presented is evaluated using both indoor and outdoor dense depth images and demonstrates significant improvements in speed and precision compared to the commonly used Fast library for approximate nearest neighbour (FLANN) [Muja and Lowe, 2009].

Informal kinship care in rural China : the influence of Confucianism and attachment

This article examines the role of informal kinship care in addressing the emotional needs and mental health, along with relationships, of school-age children left behind in rural China. Rural–urban migration in China has caused many rural children to be left behind in their local communities. Based on semi-structured interview data, this article explores Confucianism’s impact on Chinese kin caregivers’ understandings of children’s needs and their childrearing practices to address these needs. Through the lens of attachment theory, this study identified a close affective bond between children left behind and their kin caregivers. This relationship is underpinned by kin caregivers’ high commitment and love for children, and the Confucian concept of ‘benevolence’. It not only provides children left behind with a sense of belonging, it also alleviates their trauma/grief due to separation from their parents

Race matters : Indigenous employment in the Australian public service

This thesis demonstrated that race mattered as a contributing factor to the low Indigenous participation rates within the Australian Public Service. The thesis showed that the public service reproduced social relations privileging non-Indigenous executives while positioning Indigenous executives as deficient. The thesis explains how the everydayness of racism assumes the racial neutrality of institutions because the concept of race is externalised as only having relevance to the racial other. Non-Indigenous executives regard Indigeneity as being synonymous with inferiority to explain Indigenous disadvantage. Consequently, the Indigenous experience of everyday racism is perpetuated and contributes to declining rates of employment.

Effectiveness of pilot car operations in reducing speeds in a long-term rural highway work zone

Pilot cars are used in one-lane two-way work zones to guide traffic and keep their speeds within posted limits. While many studies have examined the effectiveness of measures to reduce vehicle speeds in work zones, little is known about the reductions achievable through the use of pilot cars. This paper examines the effectiveness of a pilot car in reducing travel speeds in a rural highway work zone in Queensland, Australia. Analysis of speed data covering a period of five days showed that a pilot car reduced average speeds at the treatment location, but not downstream. The proportion of vehicles speeding through the activity area was also reduced, particularly those traveling at 10 km/h or more above the posted limit. Motorists were more likely to speed during the day, under a 40 kh/h limit, when traffic volumes were higher and when there were fewer vehicles in the traffic stream. Medium vehicles were less likely to speed in the presence of a pilot car than light vehicles. To maximize these benefits, it is necessary to ensure that the pilot car itself is not speeding.

Perceptions of climate change and trust in information providers in rural Australia

Disagreement within the global science community about the certainty and causes of climate change has led the general public to question what to believe and who to trust on matters related to this issue. This paper reports on qualitative research undertaken with Australian residents from two rural areas to explore their perceptions of climate change and trust in information providers. While overall, residents tended to agree that climate change is a reality, perceptions varied in terms of its causes and how best to address it. Politicians, government, and the media were described as untrustworthy sources of information about climate change, with independent scientists being the most trusted. The vested interests of information providers appeared to be a key reason for their distrust. The findings highlight the importance of improved transparency and consultation with the public when communicating information about climate change and related policies.

Modelling for the electricity distribution network

Global awareness for cleaner and renewable energy is transforming the electricity sector at many levels. New technologies are being increasingly integrated into the electricity grid at high, medium and low voltage levels, new taxes on carbon emissions are being introduced and individuals can now produce electricity, mainly through rooftop photovoltaic (PV) systems. While leading to improvements, these changes also introduce challenges, and a question that often rises is ‘how can we manage this constantly evolving grid?’ The Queensland Government and Ergon Energy, one of the two Queensland distribution companies, have partnered with some Australian and German universities on a project to answer this question in a holistic manner. The project investigates the impact the integration of renewables and other new technologies has on the physical structure of the grid, and how this evolving system can be managed in a sustainable and economical manner. To aid understanding of what the future might bring, a software platform has been developed that integrates two modelling techniques: agent-based modelling (ABM) to capture the characteristics of the different system units accurately and dynamically, and particle swarm optimization (PSO) to find the most economical mix of network extension and integration of distributed generation over long periods of time. Using data from Ergon Energy, two types of networks (3 phase, and Single Wired Earth Return or SWER) have been modelled; three-phase networks are usually used in dense networks such as urban areas, while SWER networks are widely used in rural Queensland. Simulations can be performed on these networks to identify the required upgrades, following a three-step process: a) what is already in place and how it performs under current and future loads, b) what can be done to manage it and plan the future grid and c) how these upgrades/new installations will perform over time. The number of small-scale distributed generators, e.g. PV and battery, is now sufficient (and expected to increase) to impact the operation of the grid, which in turn needs to be considered by the distribution network manager when planning for upgrades and/or installations to stay within regulatory limits. Different scenarios can be simulated, with different levels of distributed generation, in-place as well as expected, so that a large number of options can be assessed (Step a). Once the location, sizing and timing of assets upgrade and/or installation are found using optimisation techniques (Step b), it is possible to assess the adequacy of their daily performance using agent-based modelling (Step c). One distinguishing feature of this software is that it is possible to analyse a whole area at once, while still having a tailored solution for each of the sub-areas. To illustrate this, using the impact of battery and PV can have on the two types of networks mentioned above, three design conditions can be identified (amongst others): · Urban conditions o Feeders that have a low take-up of solar generators, may benefit from adding solar panels o Feeders that need voltage support at specific times, may be assisted by installing batteries · Rural conditions - SWER network o Feeders that need voltage support as well as peak lopping may benefit from both battery and solar panel installations. This small example demonstrates that no single solution can be applied across all three areas, and there is a need to be selective in which one is applied to each branch of the network. This is currently the function of the engineer who can define various scenarios against a configuration, test them and iterate towards an appropriate solution. Future work will focus on increasing the level of automation in identifying areas where particular solutions are applicable.