Comparison between computational models of abdominal aortic aneurysm

Objective: To compare the differences in the hemodynamic parameters of abdominal aortic aneurysm (AAA) between fluid-structure interaction model (FSIM) and fluid-only model (FM), so as to discuss their application in the research of AAA. Methods: An idealized AAA model was created based on patient-specific AAA data. In FM, the flow, pressure and wall shear stress (WSS) were computed using finite volume method. In FSIM, an Arbitrary Lagrangian-Eulerian algorithm was used to solve the flow in a continuously deforming geometry. The hemodynamic parameters of both models were obtained for discussion. Results: Under the same inlet velocity, there were only two symmetrical vortexes in the AAA dilation area for FSIM. In contrast, four recirculation areas existed in FM; two were main vortexes and the other two were secondary flow, which were located between the main recirculation area and the arterial wall. Six local pressure concentrations occurred in the distal end of AAA and the recirculation area for FM. However, there were only two local pressure concentrations in FSIM. The vortex center of the recirculation area in FSIM was much more close to the distal end of AAA and the area was much larger because of AAA expansion. Four extreme values of WSS existed at the proximal of AAA, the point of boundary layer separation, the point of flow reattachment and the distal end of AAA, respectively, in both FM and FSIM. The maximum wall stress and the largest wall deformation were both located at the proximal and distal end of AAA. Conclusions: The number and center of the recirculation area for both models are different, while the change of vortex is closely associated with the AAA growth. The largest WSS of FSIM is 36% smaller than that of FM. Both the maximum wall stress and largest wall displacement shall increase with the outlet pressure increasing. FSIM needs to be considered for studying the relationship between AAA growth and shear stress.

Fluid-structure interaction study on human arterial plaque with patient specific geometry and boundary conditions

Atherosclerotic plaque rupture has been extensively considered as the leading cause of death in western countries. It is believed that high stresses within plaque can be an important factor on triggering the rupture of the plaque. Stress analysis in the coronary and carotid arteries with plaque have been developed by many researchers from 2D to 3-D models, from structure analysis only to the Fluid-Structure Interaction (FSI) models[1].

Study of reproducibility of human arterial plaque reconstruction and its effects on stress analysis based on multispectral in vivo magnetic resonance imaging

Purpose: To quantify the uncertainties of carotid plaque morphology reconstruction based on patient-specific multispectral in vivo magnetic resonance imaging (MRI) and their impacts on the plaque stress analysis. Materials and Methods: In this study, three independent investigators were invited to reconstruct the carotid bifurcation with plaque based on MR images from two subjects to study the geometry reconstruction reproducibility. Finite element stress analyses were performed on the carotid bifurcations, as well as the models with artificially modified plaque geometries to mimic the image segmentation uncertainties, to study the impacts of the uncertainties to the stress prediction. Results: Plaque reconstruction reproducibility was generally high in the study. The uncertainties among interobservers are around one or the subpixel level. It also shows that the predicted stress is relatively less sensitive to the arterial wall segmentation uncertainties, and more affected by the accuracy of lipid region definition. For a model with lipid core region artificially increased by adding one pixel on the lipid region boundary, it will significantly increase the maximum Von Mises Stress in fibrous cap (>100%) compared with the baseline model for all subjects. Conclusion: The current in vivo MRI in the carotid plaque could provide useful and reliable information for plaque morphology. The accuracy of stress analysis based on plaque geometry is subject to MRI quality. The improved resolution/quality in plaque imaging with newly developed MRI protocols would generate more realistic stress predictions.

Smooth bootstrap methods for analysis of longitudinal data

In analysis of longitudinal data, the variance matrix of the parameter estimates is usually estimated by the 'sandwich' method, in which the variance for each subject is estimated by its residual products. We propose smooth bootstrap methods by perturbing the estimating functions to obtain 'bootstrapped' realizations of the parameter estimates for statistical inference. Our extensive simulation studies indicate that the variance estimators by our proposed methods can not only correct the bias of the sandwich estimator but also improve the confidence interval coverage. We applied the proposed method to a data set from a clinical trial of antibiotics for leprosy.

Comparative analysis of traffic state estimation ─ Cumulative counts-based and trajectory-based methods

The Macroscopic Fundamental Diagram (MFD) relates space-mean density and flow. Since the MFD represents the area-wide network traffic performance, studies on perimeter control strategies and network-wide traffic state estimation utilising the MFD concept have been reported. Most previous works have utilised data from fixed sensors, such as inductive loops, to estimate the MFD, which can cause biased estimation in urban networks due to queue spillovers at intersections. To overcome the limitation, recent literature reports the use of trajectory data obtained from probe vehicles. However, these studies have been conducted using simulated datasets; limited works have discussed the limitations of real datasets and their impact on the variable estimation. This study compares two methods for estimating traffic state variables of signalised arterial sections: a method based on cumulative vehicle counts (CUPRITE), and one based on vehicles’ trajectory from taxi Global Positioning System (GPS) log. The comparisons reveal some characteristics of taxi trajectory data available in Brisbane, Australia. The current trajectory data have limitations in quantity (i.e., the penetration rate), due to which the traffic state variables tend to be underestimated. Nevertheless, the trajectory-based method successfully captures the features of traffic states, which suggests that the trajectories from taxis can be a good estimator for the network-wide traffic states.

Evaluation of Two MCDM Methods for UAV Emergency Landing

One of the major impediments for the use of UAVs in civilian environment is the capability to replicate some of the functionality of safe manned aircraft operations. One critical aspect is emergency landing. Once the possible landing sites have been rated, a decision on the most suitable choice to land is required. This is a multi-criteria decision making (MCDM) problem which needs to take into account various factors in its selection of landing site. This report summarises relevant literature in MCDM in the context of emergency forced landing and proposes and compares two algorithms and methods for this task.

Exploring methods of preparing functional cartilage-bone xenografts for joint repair

This thesis explores the feasibility of donor-receiver concept for joint replacement where cartilage-bone tissues can be taken from either human or other mammals and prepared scientifically for repairing focal joint defects in knees, hips and shoulders. The manufactured construct is immunologically inert and is capable of acting as a scaffold for engineering new cartilage-bone laminates when placed in the joint. Innovative manufacturing procedures and assessment techniques were developed for appraising this tissue-based scaffold. This research has demonstrated that tissue replacement technology can be applied in situations where blood vessels are absent such as in articular cartilage.

Motivation or demotivation of health workers providing maternal health services in rural areas in Vietnam: findings from a mixed-methods study

Background Motivation is an important driver for health professionals to maintain professional competencies, continue in a workforce and contribute to work tasks. While there is some research about motivation in health workers in low to middle income countries, maternal morbidity and mortality remains high in many low and middle income countries and this can be improved by improving the quality of maternal services and the training and skills maintenance of maternal health workers. This study examines the impact of motivation on maintenance of professional competence among maternal health workers in Vietnam using mixed methods. Methods The study consisted of a survey using a self-administered questionnaire of 240 health workers in 5 districts across two Vietnamese provinces and in-depth interviews with 43 health workers and health managers at the commune, district and provincial level to explore external factors that influenced motivation. The questionnaire includes a 23 item motivation instrument based on Kenyan health context, modified for Vietnamese language and culture. Results The 240 responses represented an estimated 95% of the target sample. Multivariate analysis showed that three factors contributed to the motivation of health workers: access to training (β = -0.14, p=0.03), ability to perform key tasks (β = 0.22, p=0.001), and shift schedule (β = -0.13, p=0.05). Motivation was higher in health workers self-identifying as competent or enabled to provide more care activities. Motivation was lower in those who worked more frequent night shifts and those who had received training in the last 12 months. The interviews identified that the latter was because they felt the training was irrelevant to them, and in some cases, they do not have opportunity to practice their learnt skills. The qualitative data also showed other factors relating to service context and organisational management practices contributed to motivation. Conclusions The study demonstrates the importance of understanding the motivations of health workers and the factors that contribute to this and may contribute to more effective management of the health workforce in low and middle income countries.

Sampling Methods for Exploring Between Subject Variability in Cardiac Electrophysiology Experiments

Between-subject and within-subject variability is ubiquitous in biology and physiology and understanding and dealing with this is one of the biggest challenges in medicine. At the same time it is difficult to investigate this variability by experiments alone. A recent modelling and simulation approach, known as population of models (POM), allows this exploration to take place by building a mathematical model consisting of multiple parameter sets calibrated against experimental data. However, finding such sets within a high-dimensional parameter space of complex electrophysiological models is computationally challenging. By placing the POM approach within a statistical framework, we develop a novel and efficient algorithm based on sequential Monte Carlo (SMC). We compare the SMC approach with Latin hypercube sampling (LHS), a method commonly adopted in the literature for obtaining the POM, in terms of efficiency and output variability in the presence of a drug block through an in-depth investigation via the Beeler-Reuter cardiac electrophysiological model. We show improved efficiency via SMC and that it produces similar responses to LHS when making out-of-sample predictions in the presence of a simulated drug block.

Guerrilla Research Tactics: Alternative Research Methods in Urban Environments

This case-study examines innovative experimentation with mobile and cloud-based technologies, utilising “Guerrilla Research Tactics” (GRT), as a means of covertly retrieving data from the urban fabric. Originally triggered by participatory action research (Kindon et al., 2008) and unobtrusive research methods (Kellehear, 1993), the potential for GRT lies in its innate ability to offer researchers an alternative, creative approach to data acquisition, whilst simultaneously allowing them to engage with the public, who are active co-creators of knowledge. Key characteristics are political agenda, the unexpected and the unconventional, which allow for an interactive, unique and thought-provoking experience for both researcher and participant.

A comparison of training methods to increase neck muscle strength

Objective To compare two neck strength training modalities. Background Neck injury in pilots flying high performance aircraft is a concern in aviation medicine. Strength training may be an effective means to strengthen the neck and decrease injury risk. Methods The cohort consisted of 32 age-height-weight matched participants, divided into two experimental groups; the Multi-Cervical Unit (MCU) and Thera-Band tubing groups (THER), and a control (CTRL) group. Ten weeks of training were undertaken and pre-and post isometric strength testing for all groups was performed on the MCU. Comparisons between the three groups were made using a Kruskal-Wallis test and effect sizes between the MCU and the THER groups and the THER and CTRL groups were also calculated. Results The MCU group displayed the greatest increase in isometric strength (flexion 64.4%, extension 62.9%, left lateral flexion 53.3%, right lateral flexion 49.1%) and differences were only statistically significant (p<0.05) when compared to the CTRL group. Increases in neck strength for the THER group were lower than that shown in the MCU group (flexion 42.0%, extension 29.9%, left lateral flexion 26.7%, right lateral flexion 24.1%). Moderate to large effect sizes were found between the MCU and THER as well as the THER and CTRL groups. Conclusions This study demonstrated that the MCU was the most effective training modality to increase isometric cervical muscle strength. Thera-Band tubing did however, produce moderate gains in isometric neck strength

Evaluation of an intervention for patients with alcohol-related injuries: results of a mixed methods study

Objective: To explore the effect of education and training on the delivery of alcohol screening and brief intervention and referral to high-risk patients in a hospital setting. Main outcome measures included; delivery of training; practice change in relation to staff performing alcohol screening, brief intervention and referrals. Methods: Observational study design using mixed methods set in a tertiary referral hospital. Pre-post assessment of medical records and semi-structured interviews with key informants. Results: Routine screening for substance misuse (9% pre / 71.4% post) and wellbeing concerns (6.6% pre / 15 % post) was more frequent following the introduction of resources and staff participation in educational workshops. There was no evidence of a concomitant increase in delivery of brief intervention or referrals to services. Implementation challenges, including time constraints and staff attitudes, and enablers such as collaboration and visible pathways, were identified. Conclusion: Rates of patient screening increased, however barriers to delivery of brief intervention and referrals remained. Implementation strategies targeting specific barriers and enablers to introducing interventions are both required to improve the application of secondary prevention for patients in acute settings. Implications: Educational training, formalised liaison between services, systematised early intervention protocols, and continuous quality improvement processes will progress service delivery in this area.

Implementing music therapy on an adolescent inpatient unit: A mixed-methods evaluation of acceptability, experience of participation and perceived impact

Objective: We aimed to assess the feasibility of delivering a music therapy program on adolescent psychiatric wards. Method: We undertook a mixed-methods evaluation of a pilot program. Various active and receptive techniques were employed in group music therapy sessions delivered as part of a structured clinical program. Data collected in interviews with participants and staff and feedback questionnaires were thematically and descriptively analysed and triangulated. Results: Data from 62 questionnaires returned by 43 patients who took part in 16 music therapy sessions, and seven staff, evidenced strong support for music therapy. Patients typically reported experiencing sessions as relaxing, comforting, uplifting, and empowering; >90% would participate by choice and use music therapeutically in the future. Staff endorsed music therapy as valuable therapeutically, reporting that patients engaged enthusiastically and identified sessions as improving their own moods and ward milieu. Conclusions: Integration of music therapy in inpatient treatment of adolescents is feasible and acceptable, and is valued by staff and patients as a complement to ‘talking therapies’. Participation is enjoyed and associated with outcomes including improvement in mood, expression of feelings and social engagement consistent with recovery.

A mixed-methods research approach to the review of competency standards for orthotist/prosthetists in Australia

Aim: The requirement for an allied health workforce is expanding as the global burden of disease increases internationally. To safely meet the demand for an expanded workforce of orthotist/prosthetists in Australia, competency based standards, which are up-to-date and evidence-based, are required. The aims of this study were to determine the minimum level for entry into the orthotic/prosthetic profession; to develop entry level competency standards for the profession; and to validate the developed entry-level competency standards within the profession nationally, using an evidence-based approach. Methods: A mixed-methods research design was applied, using a three-step sequential exploratory design, where step 1 involved collecting and analyzing qualitative data from two focus groups; step 2 involved exploratory instrument development and testing, developing the draft competency standards; and step 3 involved quantitative data collection and analysis – a Delphi survey. In stage 1 (steps 1 and 2), the two focus groups – an expert and a recent graduate group of Australian orthotist/prosthetists – were led by an experienced facilitator, to identify gaps in the current competency standards and then to outline a key purpose, and work roles and tasks for the profession. The resulting domains and activities of the first draft of the competency standards were synthesized using thematic analysis. In stage 2 (step 3), the draft-competency standards were circulated to a purposive sample of the membership of the Australian Orthotic Prosthetic Association, using three rounds of Delphi survey. A project reference group of orthotist/prosthetists reviewed the results of both stages. Results: In stage 1, the expert (n = 10) and the new graduate (n = 8) groups separately identified work roles and tasks, which formed the initial draft of the competency standards. Further drafts were refined and performance criteria added by the project reference group, resulting in the final draft-competency standards. In stage 2, the final draft-competency standards were circulated to 56 members (n = 44 final round) of the Association, who agreed on the key purpose, 6 domains, 18 activities, and 68 performance criteria of the final competency standards. Conclusion: This study outlines a rigorous and evidence-based mixed-methods approach for developing and endorsing professional competency standards, which is representative of the views of the profession of orthotist/prosthetists.