Aboriginal and Torres Strait Islander university students conceptions of formal learning and experiences of informal learning

This paper describes an investigation of conceptions of learning held by 22 Aboriginal and Torres Strait Islander students from three universities in Queensland, Australia. Other areas investigated were students' experiences of informal learning, their reasons for studying and the strategies they used to learn. Research into conceptions of learning is gaining impetus and current beliefs include the premise that approaches to learning adopted by university students, and hence learning outcomes, are closely related to their conceptions of learning. There is substantial research focused on Aboriginal learning styles in early childhood and primary school which indicates that Aboriginal children prefer to learn in a practical way as well as through observation and imitation and trial and error. Very little research has focused specifically on Aboriginal university students' conceptions of learning. Results of this study found that these students view and approach formal university learning in much the same way as other university students and most hold quantitative conceptions of learning. The most interesting result was the difference between students' conceptions of formal learning and their experiences of informal learning. Many students' experiences of informal learning were grounded in practical activities or exhibited a cultural focus, however, most formal learning is not dependent upon practical or cultural knowledge. It is proposed that formal learning for Indigenous students recognise and include an Indigenous perspective such as integrating, where appropriate, practical strategies for learning. We also suggest that Indigenous students be helped to develop conceptions that will enable them to learn formal, theoretical material successfully.

Online Gaming in Context : the Social and Cultural Significance of Online Games

There is little question of the social, cultural and economic importance of video games in the world today, with gaming now rivalling the movie and music sectors as a major leisure industry and pastime. The significance of video games within our everyday lives has certainly been increased and shaped by new technologies and gaming patterns, including the rise of home-based games consoles, advances in mobile telephone technology, the rise in more 'sociable' forms of gaming, and of course the advent of the Internet. This book explores the opportunities, challenges and patterns of gameplay and sociality afforded by the Internet and online gaming. Bringing together a series of original essays from both leading and emerging academics in the field of game studies, many of which employ new empirical work and innovative theoretical approaches to gaming, this book considers key issues crucial to our understanding of online gaming and associated social relations, including: patterns of play, legal and copyright issues, player production, identity construction, gamer communities, communication, patterns of social exclusion and inclusion around religion, gender and disability, and future directions in online gaming.

Efficiently capturing large, complex cultural heritage sites with a handheld mobile 3D laser mapping system

Accurate three-dimensional representations of cultural heritage sites are highly valuable for scientific study, conservation, and educational purposes. In addition to their use for archival purposes, 3D models enable efficient and precise measurement of relevant natural and architectural features. Many cultural heritage sites are large and complex, consisting of multiple structures spatially distributed over tens of thousands of square metres. The process of effectively digitising such geometrically complex locations requires measurements to be acquired from a variety of viewpoints. While several technologies exist for capturing the 3D structure of objects and environments, none are ideally suited to complex, large-scale sites, mainly due to their limited coverage or acquisition efficiency. We explore the use of a recently developed handheld mobile mapping system called Zebedee in cultural heritage applications. The Zebedee system is capable of efficiently mapping an environment in three dimensions by continually acquiring data as an operator holding the device traverses through the site. The system was deployed at the former Peel Island Lazaret, a culturally significant site in Queensland, Australia, consisting of dozens of buildings of various sizes spread across an area of approximately 400 × 250 m. With the Zebedee system, the site was scanned in half a day, and a detailed 3D point cloud model (with over 520 million points) was generated from the 3.6 hours of acquired data in 2.6 hours. We present results demonstrating that Zebedee was able to accurately capture both site context and building detail comparable in accuracy to manual measurement techniques, and at a greatly increased level of efficiency and scope. The scan allowed us to record derelict buildings that previously could not be measured because of the scale and complexity of the site. The resulting 3D model captures both interior and exterior features of buildings, including structure, materials, and the contents of rooms.

Cross cultural adaptation and validation of a Spanish version of the lower limb functional index

Background: The Lower Limb Functional Index (LLFI) is a relatively recently published regional outcome measure. The development article showed the LLFI had robust and valid clinimetric properties with sound psychometric and practical characteristics when compared to the Lower Limb Extremity Scale (LEFS) criterion standard. Objective: The purpose of this study was cross cultural adaptation and validation of the LLFI Spanish-version (LLFI-Sp) in a Spanish population. Methods: A two stage observational study was conducted. The LLFI was initially cross-culturally adapted to Spanish through double forward and single backward translation; then subsequently validated for the psychometric characteristics of validity, internal consistency, reliability, error score and factor structure. Participants (n = 136) with various lower limb conditions of >12 weeks duration completed the LLFI-Sp, Western Ontario and McMaster University Osteoarthritis Index (WOMAC) and the Euroqol Health Questionnaire 5 Dimensions (EQ-5D-3 L). The full sample was employed to determine internal consistency, concurrent criterion validity, construct validity and factor structure; a subgroup (n = 45) determined reliability at seven days concurrently completing a global rating of change scale. Results: The LLFI-Sp demonstrated high but not excessive internal consistency (α = 0.91) and high reliability (ICC = 0.96). The factor structure was one-dimensional which supported the construct validity. Criterion validity with the WOMAC was strong (r = 0.77) and with the EQ-5D-3 L fair and inversely correlated (r = -0.62). The study limitations included the lack of longitudinal data and the determination of responsiveness. Conclusions: The LLFI-Sp supports the findings of the original English version as being a valid lower limb regional outcome measure. It demonstrated similar psychometric properties for internal consistency, validity, reliability, error score and factor structure.

A cultural life in Samoa

A travel article about a tour of Samoa. I WAKE to the smell of smoke. Outside, a morning routine has begun - the burning of leaves that overnight settle in the backyards. Even in the capital, gardens are miniature farms. Chickens, bananas and coconuts. When the smoke haze lifts and the faint waves of a sea breeze come off Apia Harbour, the corrugated iron roofs shine through like headlights coming out of fog...

Factors affecting new project delays in Saudi Arabian manufacturing organisations

Delay in the delivery of manufacturing projects is a major problem in manufacturing industries. This research investigates the factors that influence the lead time of new projects in manufacturing organisations. Employing a questionnaire survey and interview methodologies, this study collected data from five leading manufacturing organisations as well as their suppliers and contractors in Saudi Arabia to examine what, how and why the new project implementation delay occurs. Results show that the main factors contributing to manufacturing delays are related to people and material. On the other hand, social, political and cultural factors were the least significant factors as per the outcome of this study. Views of manufacturers, suppliers and contractors regarding causes of delays have also been analysed.

Cross-cultural adaptation, reliability and validity of the Spanish version of the upper limb functional index

Background The Upper Limb Functional Index (ULFI) is an internationally widely used outcome measure with robust, valid psychometric properties. The purpose of study is to develop and validate a ULFI Spanish-version (ULFI-Sp). Methods A two stage observational study was conducted. The ULFI was cross-culturally adapted to Spanish through double forward and backward translations, the psychometric properties were then validated. Participants (n = 126) with various upper limb conditions of >12 weeks duration completed the ULFI-Sp, QuickDASH and the Euroqol Health Questionnaire 5 Dimensions (EQ-5D-3 L). The full sample determined internal consistency, concurrent criterion validity, construct validity and factor structure; a subgroup (n = 35) determined reliability at seven days. Results The ULFI-Sp demonstrated high internal consistency (α = 0.94) and reliability (r = 0.93). Factor structure was one-dimensional and supported construct validity. Criterion validity with the EQ-5D-3 L was fair and inversely correlated (r = −0.59). The QuickDASH data was unavailable for analysis due to excessive missing responses. Conclusions The ULFI-Sp is a valid upper limb outcome measure with similar psychometric properties to the English language version.

Effective diffusivity and evaporative cooling in convective drying of food material

This article presents mathematical models to simulate coupled heat and mass transfer during convective drying of food materials using three different effective diffusivities: shrinkage dependent, temperature dependent and average of those two. Engineering simulation software COMSOL Multiphysics was utilized to simulate the model in 2D and 3D. The simulation results were compared with experimental data. It is found that the temperature dependent effective diffusivity model predicts the moisture content more accurately at the initial stage of the drying, whereas, the shrinkage dependent effective diffusivity model is better for the final stage of the drying. The model with shrinkage dependent effective diffusivity shows evaporative cooling phenomena at the initial stage of drying. This phenomenon was investigated and explained. Three dimensional temperature and moisture profiles show that even when the surface is dry, inside of the sample may still contain large amount of moisture. Therefore, drying process should be carefully dealt with otherwise microbial spoilage may start from the centre of the ‘dried’ food. A parametric investigation has been conducted after the validation of the model.

Cyclododecane as support material for clean and facile transfer of large-area few-layer graphene

The transfer of chemical vapor deposited graphene is a crucial process, which can affect the quality of the transferred films and compromise their application in devices. Finding a robust and intrinsically clean material capable of easing the transfer of graphene without interfering with its properties remains a challenge. We here propose the use of an organic compound, cyclododecane, as a transfer material. This material can be easily spin coated on graphene and assist the transfer, leaving no residues and requiring no further removal processes. The effectiveness of this transfer method for few-layer graphene on a large area was evaluated and confirmed by microscopy, Raman spectroscopy, x-ray photoemission spectroscopy, and four-point probe measurements. Schottky-barrier solar cells with few-layer graphene were fabricated on silicon wafers by using the cyclododecane transfer method and outperformed reference cells made by standard methods.

Recognising emotional expressions of complaining customers : A cross-cultural study

Purpose This study aims to test service providers’ ability to recognise non-verbal emotions in complaining customers of same and different cultures. Design/methodology/approach In a laboratory study, using a between-subjects experimental design (n = 153), we tested the accuracy of service providers’ perceptions of the emotional expressions of anger, fear, shame and happiness of customers from varying cultural backgrounds. After viewing video vignettes of customers complaining (with the audio removed), participants (in the role of service providers) assessed the emotional state of the customers portrayed in the video. Findings Service providers in culturally mismatched dyads were prone to misreading anger, happiness and shame expressed by dissatisfied customers. Happiness was misread in the displayed emotions of both dyads. Anger was recognisable in the Anglo customers but not Confucian Asian, while Anglo service providers misread both shame and happiness in Confucian Asian customers. Research limitations/implications The study was conducted in the laboratory and was based solely on participant’s perceptions of actors’ non-verbal facial expressions in a single encounter. Practical implications Given the level of ethnic differences in developed nations, a culturally sensitive workplace is needed to foster effective functioning of service employee teams. Ability to understand cultural display rules and to recognise and interpret emotions is an important skill for people working in direct contact with customers. Originality/value This research addresses the lack of empirical evidence for the recognition of customer emotions by service providers and the impact of cross-cultural differences.

Profile of a narcissistic leader : coffee’s for closers only

Purpose In the past, leadership scholars have tended to focus on leadership as a force for good and productivity (Ashworth, 1994; Higgs, 2009; Padilla, Hogan, & Kaiser, 2007). However, recently attention has been given to the ‘dark side’ of leadership (see Higgs, 2009; Judge, Piccolo, & Kosalka, 2009). The aim of this chapter is to explore dark leadership from the perspective of the narcissistic leader using a fictional character from a popular film. Methodology/approach Using the Diagnostic and Statistical Manual of Mental Disorders, 4th edition, 1994 (DSM-IV) (American Psychiatric Association, 2000) as an operational definition of narcissistic personality disorder we explore the psychology of the narcissistic leader through a fictional character study in a popular film. Findings We have created a psychological profile of a narcissistic leader which identifies specific behavioural characteristics within a toxic organizational culture. Social implications This study has implications for employees within any organizational culture. It is significant because it can illustrate how dark leadership can impact negatively within organizations. Originality/value The use of actual living persons on which to base case study material in the study of dark leadership is problematic and constrained by ethical issues. However, the use of characters in fiction, such as contemporary film and drama, represents an excellent source of case study material. Given that little empirical works exists on narcissistic leaders and leadership, the chapter adds originality and value to the field.

Writing embodied practice from the inside : outside the exegesis

The textual turn is a good friend of expert spectating, where it assumes the role of writing-productive apparatus, but no friend at all of expert practices or practitioners (Melrose, 2003). Introduction The challenge of time-based embodied performance when the artefact is unstable As a former full-time professional practitioner with an embodied dance practice as performer, choreographer and artistic director for three decades, I somewhat unexpectedly entered the world of academia in 2000 after completing a practice-based PhD, which was described by its examiners as ‘pioneering’. Like many artists my intention was to deepen and extend my practice through formal research into my work and its context (which was intercultural) and to privilege the artist’s voice in a research world where it was too often silent. Practice as research, practice-based research, and practice-led research were not yet fully named. It was in its infancy and my biggest challenge was to find a serviceable methodology which did not betray my intentions to keep practice at the centre of the research. Over the last 15 years, practice led doctoral research, where examinable creative work is placed alongside an accompanying (exegetical) written component, has come a long way. It has been extensively debated with a range of theories and models proposed (Barrett & Bolt, 2007, Pakes, 2003 & 2004, Piccini, 2005, Philips, Stock & Vincs 2009, Stock, 2009 & 2010, Riley & Hunter 2009, Haseman, 2006, Hecq, 2012). Much of this writing is based around epistemological concerns where the research methodologies proposed normally incorporate a contextualisation of the creative work in its field of practice, and more importantly validation and interrogation of the processes of the practice as the central ‘data gathering’ method. It is now widely accepted, at least in the Australian creative arts context, that knowledge claims in creative practice research arise from the material activities of the practice itself (Carter, 2004). The creative work explicated as the tangible outcome of that practice is sometimes referred to as the ‘artefact’. Although the making of the artefact, according to Colbert (2009, p. 7) is influenced by “personal, experiential and iterative processes”, mapping them through a research pathway is “difficult to predict [for] “the adjustments made to the artefact in the light of emerging knowledge and insights cannot be foreshadowed”. Linking the process and the practice outcome most often occurs through the textual intervention of an exegesis which builds, and/or builds on, theoretical concerns arising in and from the work. This linking produces what Barrett (2007) refers to as “situated knowledge… that operates in relation to established knowledge” (p. 145). But what if those material forms or ‘artefacts’ are not objects or code or digitised forms, but live within the bodies of artist/researchers where the nature of the practice itself is live, ephemeral and constantly transforming, as in dance and physical performance? Even more unsettling is when the ‘artefact’ is literally embedded and embodied in the work and in the maker/researcher; when subject and object are merged. To complicate matters, the performing arts are necessarily collaborative, relying not only on technical mastery and creative/interpretive processes, but on social and artistic relationships which collectively make up the ‘artefact’. This chapter explores issues surrounding live dance and physical performance when placed in a research setting, specifically the complexities of being required to translate embodied dance findings into textual form. Exploring how embodied knowledge can be shared in a research context for those with no experiential knowledge of communicating through and in dance, I draw on theories of “dance enaction” (Warburton, 2011) together with notions of “affective intensities” and “performance mastery” (Melrose, 2003), “intentional activity” (Pakes, 2004) and the place of memory. In seeking ways to capture in another form the knowledge residing in live dance practice, thus making implicit knowledge explicit, I further propose there is a process of triple translation as the performance (the living ‘artefact’) is documented in multi-facetted ways to produce something durable which can be re-visited. This translation becomes more complex if the embodied knowledge resides in culturally specific practices, formed by world views and processes quite different from accepted norms and conventions (even radical ones) of international doctoral research inquiry. But whatever the combination of cultural, virtual and genre-related dance practices being researched, embodiment is central to the process, outcome and findings, and the question remains of how we will use text and what forms that text might take.