Living with the Legacy of Conquest and Culture : Social Justice Leadership in Education and the Indigenous Peoples of Australia and America

Indigenous peoples have survived the most inhumane acts and violations against them. Despite acts of genocide, Aboriginal Australians and Native Americans have survived. The impact of the past 500 years cannot be separated from understandings of education for Native Americans in the same way that the impact of the past 220 years cannot be separated from the understandings of Australian Aboriginal people’s experiences of education. This chapter is about comparisons in Aboriginal and Native American communities and their collision with the dominant, white European settlers who came to Australia and America. Chomsky (Intervention in Vietnam and Central America: parallels and differences. In: Peck J (ed) The Chomsky Reader. Pantheon Books, New York, p 315, 1987) once remarked that if one took two historical events and compared them for similarities and differences, you would find both. The real test was whether on the similarities they were significant. The position of the coauthors of this chapter is in the affirmative and we take this occasion to lay them out for analysis and review. The chapter begins with a discussion of the historical legacy of oppression and colonization impacting upon Indigenous peoples in Australia and in the United States, followed by a discussion of the plight of Indigenous children in a specific State in America. Through the lens of social justice, we examine those issues and attitudes that continue to subjugate these same peoples in the economic and educational systems of both nations. The final part of the chapter identifies some implications for school leadership.

A statistical strategy to select optimal structural health monitoring data in operational modal analysis

Operational modal analysis (OMA) is prevalent in modal identifi cation of civil structures. It asks for response measurements of the underlying structure under ambient loads. A valid OMA method requires the excitation be white noise in time and space. Although there are numerous applications of OMA in the literature, few have investigated the statistical distribution of a measurement and the infl uence of such randomness to modal identifi cation. This research has attempted modifi ed kurtosis to evaluate the statistical distribution of raw measurement data. In addition, a windowing strategy employing this index has been proposed to select quality datasets. In order to demonstrate how the data selection strategy works, the ambient vibration measurements of a laboratory bridge model and a real cable-stayed bridge have been respectively considered. The analysis incorporated with frequency domain decomposition (FDD) as the target OMA approach for modal identifi cation. The modal identifi cation results using the data segments with different randomness have been compared. The discrepancy in FDD spectra of the results indicates that, in order to fulfi l the assumption of an OMA method, special care shall be taken in processing a long vibration measurement data. The proposed data selection strategy is easy-to-apply and verifi ed effective in modal analysis.

Modelling risk at low exposure railway level crossings : supporting an argument for low-cost level crossing warning devices with lower levels of safety integrity

This paper describes a risk model for estimating the likelihood of collisions at low-exposure railway level crossings, demonstrating the effect that differences in safety integrity can have on the likelihood of a collision. The model facilitates the comparison of safety benefits between level crossings with passive controls (stop or give-way signs) and level crossings that have been hypothetically upgraded with conventional or low-cost warning devices. The scenario presented illustrates how treatment of a cross-section of level crossings with low cost devices can provide a greater safety benefit compared to treatment with conventional warning devices for the same budget.

Comparison of genomic DNA extraction techniques from whole blood samples : a time, cost and quality evaluation study

Genomic DNA obtained from patient whole blood samples is a key element for genomic research. Advantages and disadvantages, in terms of time-efficiency, cost-effectiveness and laboratory requirements, of procedures available to isolate nucleic acids need to be considered before choosing any particular method. These characteristics have not been fully evaluated for some laboratory techniques, such as the salting out method for DNA extraction, which has been excluded from comparison in different studies published to date. We compared three different protocols (a traditional salting out method, a modified salting out method and a commercially available kit method) to determine the most cost-effective and time-efficient method to extract DNA. We extracted genomic DNA from whole blood samples obtained from breast cancer patient volunteers and compared the results of the product obtained in terms of quantity (concentration of DNA extracted and DNA obtained per ml of blood used) and quality (260/280 ratio and polymerase chain reaction product amplification) of the obtained yield. On average, all three methods showed no statistically significant differences between the final result, but when we accounted for time and cost derived for each method, they showed very significant differences. The modified salting out method resulted in a seven- and twofold reduction in cost compared to the commercial kit and traditional salting out method, respectively and reduced time from 3 days to 1 hour compared to the traditional salting out method. This highlights a modified salting out method as a suitable choice to be used in laboratories and research centres, particularly when dealing with a large number of samples.

Importance of sustainability-related cost components in highway infrastructure : perspective of stakeholders in Australia

Highway infrastructure development typically requires major capital input. Unless planned properly, such requirements can cause serious financial constraints for investors. The push for sustainability adds a new dimension to the complexity of evaluating highway projects. Finding environmentally and socially responsible solutions for highway construction will improve its potential for acceptance by the society and in many instances the infrastructure's life span. Even so, the prediction and determination of a project's long-term financial viability can be a precarious exercise. Existing studies in this area have not indicated details of how to identify and deal with costs incurred in pursuing sustainability measures in highway infrastructure. This paper provides insights into the major challenges of implementing sustainability in highway project development in terms of financial concerns and obligations. It discusses the results from recent research through a literature study and a questionnaire survey of key industry stakeholders involved in highway infrastructure development. The research identified critical cost components relating to sustainability measures based on perspectives of industry stakeholders. All stakeholders believe sustainability related costs are an integral part of the decision making. However, the importance rating of these costs is relative to each stakeholder's core business objectives. This will influence the way these cost components are dealt with during the evaluation of highway investment alternatives and financial implications. This research encourages positive thinking among the highway infrastructure practitioners about sustainability. It calls for the construction industry to maximise sustainability deliverables while ensuring financial viability over the life cycle of highway infrastructure projects.

Integrating Intangible Cultural Heritage elements and learning strategy : a case study

Tanzania has a rich and diverse cultural history based on community cultural life. However, at present, young people have limited opportunity to exploit this richness of creative expressions and engage in creative jobs as their future career. Hence, the significant challenge remains: how to integrate Intangible cultural heritage elements and learning strategy as a means of promoting creative jobs for youth. This paper presents a case study on 'Strategies for youth employment in Tanzania: A creative industries approach'. The case study employed mixed methods incorporating questionnaires, interviews and focus groups and was held in Dar-Es-Salaam, Mwanza, Dodoma, Lindi and Morogoro from July to October, 2012. This paper discusses some of the issues and argues that there is no virtual utilization of the intangible cultural heritage knowledge and skills in 'putting education to work' (UNESCO, 2012) for the better prospects of youth. Although the discussion is specific to Tanzania, the case may also apply to other developing countries.

Reflection as a dialogic strategy for developing a professional identity

The benefits of reflective practice have been well established in the literature (Rogers, 2001), as have models to embed reflective thinking in higher education curriculum (Ryan and Ryan, 2012). Reflection is commonly envisaged as a textual practice, through which students ‘reflect in and on action’ (Schön 1983), and articulate their experiences, learning and outcomes in written portfolios, journals, or blogs. While such approaches to individual written reflection are undoubtedly beneficial for deepening insight and self-criticality, reflection can also provide other benefits when approached as a collaborative, oral activity. This poster presents a dialogic model of reflective practice that affords the opportunity for developing presentation skills, critique, community and professional identity formation. This dialogic approach to reflection is illustrated by a first year subject (‘KIB101 Visual Communication’ at QUT), in which students apply visual theory (presented in lectures) to communication and graphic design problems in the studio. In regular (fortnightly) presentations, they critically reflect upon their work in progress by aligning it with the concepts, design principles and professional language of the lectures. This iterative process facilitates responsive peer feedback, similarly couched in the formal terms of the discipline. This ‘mirrored reflection’ not only provides opportunities to incrementally improve, it also sets designs in a theoretical frame; provides the opportunity for comparative analysis (to see design principles applied by peers in different ways); to practice formal design language and presentation techniques of the discipline and; because peer critique is framed as an act of generosity; it affords the development of a supportive community of practice. In these ways, dialogic reflection helps students develop a professional voice and identity from first year. Evidence of impact is provided by quantitative and qualitative student feedback over several years, as well as institutional feedback and recognition.

The financial cost of hamstring strain injuries in the Australian Football League

Background/Aim Hamstring strain injuries (HSIs) have remained the most prevalent injury in the Australian football league (AFL) over the past 21 regular seasons. The impact of HSIs in sport is often expressed as regular season games missed due to injury. However the financial cost of athletes missing games due to injury has not been investigated. The aim of this report is to estimate the financial cost of games missed due to HSIs in the AFL. Method Data was collected using publically available information from the AFL’s injury report and the official AFL annual report for the past 10 competitive AFL seasons. Average athlete salary and injury epidemiology data was used to determine the average yearly financial cost of HSIs for AFL clubs and the average financial cost of a single HSI over this time period. Results Across the observed period, average yearly financial cost of HSIs per club increased by 71% compared to a 43% increase in average yearly athlete salary. Over the same time period the average financial cost of a single HSI increased by 56% from $25,603 in 2003 to $40,021 in 2012, despite little change in HSI rates during the period. Conclusion The observed increased financial cost of HSIs was ultimately explained by the failure of teams to decrease HSI rates, but coupled with increases in athlete salaries over the past 10 season. The information presented in this report will highlight the financial cost of HSIs and other sporting injuries, raising greater awareness and the need for further funding for research into injury prevention strategies to maximise economical return for investment in athletes.

Two-stage power network reconfiguration strategy considering node importance and restored generation capacity

Network reconfiguration after complete blackout of a power system is an essential step for power system restoration. A new node importance evaluation method is presented based on the concept of regret, and maximisation of the average importance of a path is employed as the objective of finding the optimal restoration path. Then, a two-stage method is presented to optimise the network reconfiguration strategy. Specifically, the restoration sequence of generating units is first optimised so as to maximise the restored generation capacity, then the optimal restoration path is selected to restore the generating nodes concerned and the issues of selecting a serial or parallel restoration mode and the reconnecting failure of a transmission line are next considered. Both the restoration path selection and skeleton-network determination are implemented together in the proposed method, which overcomes the shortcoming of separate decision-making in the existing methods. Finally, the New England 10-unit 39-bus power system and the Guangzhou power system in South China are employed to demonstrate the basic features of the proposed method.

Using cultural-historical activity theory (CHAT) to study the relationship between school leadership and organisational change

This study aimed to identify how school leaders’ practices influence department activities during school transformation. The method used to explore emerging disturbances and contradictions within and between school departments was based on Cultural Historical Activity Theory (CHAT). The findings show that in order to implement educational changes in schools successfully, leaders should promote the change they envision as being highly consistent with the current collective identity (shared object) of the departments. From this perspective, the systemic components of the school departments are given a sense of preservation and continuity, rather than loss.

A framework for cost-aware process management : cost reporting and cost prediction

Organisations are constantly seeking efficiency gains for their business processes in terms of time and cost. Management accounting enables detailed cost reporting of business operations for decision making purposes, although significant effort is required to gather accurate operational data. Process mining, on the other hand, may provide valuable insight into processes through analysis of events recorded in logs by IT systems, but its primary focus is not on cost implications. In this paper, a framework is proposed which aims to exploit the strengths of both fields in order to better support management decisions on cost control. This is achieved by automatically merging cost data with historical data from event logs for the purposes of monitoring, predicting, and reporting process-related costs. The on-demand generation of accurate, relevant and timely cost reports, in a style akin to reports in the area of management accounting, will also be illustrated. This is achieved through extending the open-source process mining framework ProM.

Cost-effectiveness of a telephone-delivered education programme to prevent early childhood caries in a disadvantaged area : a cohort study

Objectives Early childhood caries is a highly destructive dental disease which is compounded by the need for young children to be treated under general anaesthesia. In Australia, there are long waiting periods for treatment at public hospitals. In this paper, we examined the costs and patient outcomes of a prevention programme for early childhood caries to assess its value for government services. Design Cost-effectiveness analysis using a Markov model. Setting Public dental patients in a low socioeconomic, socially disadvantaged area in the State of Queensland, Australia. Participants Children aged 6 months to 6 years received either a telephone prevention programme or usual care. Primary and secondary outcome measures A mathematical model was used to assess caries incidence and public dental treatment costs for a cohort of children. Healthcare costs, treatment probabilities and caries incidence were modelled from 6 months to 6 years of age based on trial data from mothers and their children who received either a telephone prevention programme or usual care. Sensitivity analyses were used to assess the robustness of the findings to uncertainty in the model estimates. Results By age 6 years, the telephone intervention programme had prevented an estimated 43 carious teeth and saved £69 984 in healthcare costs per 100 children. The results were sensitive to the cost of general anaesthesia (cost-savings range £36 043–£97 298) and the incidence of caries in the prevention group (cost-savings range £59 496–£83 368) and usual care (cost-savings range £46 833–£93 328), but there were cost savings in all scenarios. Conclusions A telephone intervention that aims to prevent early childhood caries is likely to generate considerable and immediate patient benefits and cost savings to the public dental health service in disadvantaged communities.

To what extent is the Mayer and Salovey (1997) model of emotional intelligence a useful predictor of leadership style and perceived leadership outcomes in Australian educational institutions?

Researchers have found that transformational leadership is related to positive outcomes in educational institutions. Hence, it is important to explore constructs that may predict leadership style in order to identify potential transformational leaders in assessment and selection procedures. Several studies in non-educational settings have found that emotional intelligence is a useful predictor of transformational leadership, but these studies have generally lacked methodological rigor and contextual relevance. This project, set in Australian educational institutions, employed a more rigorous methodology to answer the question: to what extent is the Mayer and Salovey (1997) model of emotional intelligence a useful predictor of leadership style and perceived leadership outcomes? The project was designed to move research in the field forward by using valid and reliable instruments, controlling for other predictors, obtaining an adequately sized sample of current leaders and collecting multiple ratings of their leadership behaviours. The study (N = 144 leaders and 432 raters) results indicated that emotional intelligence was not a useful predictor of leadership style and perceived leadership outcomes. In contrast, several of the other predictors in the study were found to predict leadership style.

Distributed low-power image processing in wireless sensor networks for intelligent video surveillance applications

Distributed Wireless Smart Camera (DWSC) network is a special type of Wireless Sensor Network (WSN) that processes captured images in a distributed manner. While image processing on DWSCs sees a great potential for growth, with its applications possessing a vast practical application domain such as security surveillance and health care, it suffers from tremendous constraints. In addition to the limitations of conventional WSNs, image processing on DWSCs requires more computational power, bandwidth and energy that presents significant challenges for large scale deployments. This dissertation has developed a number of algorithms that are highly scalable, portable, energy efficient and performance efficient, with considerations of practical constraints imposed by the hardware and the nature of WSN. More specifically, these algorithms tackle the problems of multi-object tracking and localisation in distributed wireless smart camera net- works and optimal camera configuration determination. Addressing the first problem of multi-object tracking and localisation requires solving a large array of sub-problems. The sub-problems that are discussed in this dissertation are calibration of internal parameters, multi-camera calibration for localisation and object handover for tracking. These topics have been covered extensively in computer vision literatures, however new algorithms must be invented to accommodate the various constraints introduced and required by the DWSC platform. A technique has been developed for the automatic calibration of low-cost cameras which are assumed to be restricted in their freedom of movement to either pan or tilt movements. Camera internal parameters, including focal length, principal point, lens distortion parameter and the angle and axis of rotation, can be recovered from a minimum set of two images of the camera, provided that the axis of rotation between the two images goes through the camera's optical centre and is parallel to either the vertical (panning) or horizontal (tilting) axis of the image. For object localisation, a novel approach has been developed for the calibration of a network of non-overlapping DWSCs in terms of their ground plane homographies, which can then be used for localising objects. In the proposed approach, a robot travels through the camera network while updating its position in a global coordinate frame, which it broadcasts to the cameras. The cameras use this, along with the image plane location of the robot, to compute a mapping from their image planes to the global coordinate frame. This is combined with an occupancy map generated by the robot during the mapping process to localised objects moving within the network. In addition, to deal with the problem of object handover between DWSCs of non-overlapping fields of view, a highly-scalable, distributed protocol has been designed. Cameras that follow the proposed protocol transmit object descriptions to a selected set of neighbours that are determined using a predictive forwarding strategy. The received descriptions are then matched at the subsequent camera on the object's path using a probability maximisation process with locally generated descriptions. The second problem of camera placement emerges naturally when these pervasive devices are put into real use. The locations, orientations, lens types etc. of the cameras must be chosen in a way that the utility of the network is maximised (e.g. maximum coverage) while user requirements are met. To deal with this, a statistical formulation of the problem of determining optimal camera configurations has been introduced and a Trans-Dimensional Simulated Annealing (TDSA) algorithm has been proposed to effectively solve the problem.

Cost-aware business process management: A research agenda

Organisations are constantly seeking cost-effective improvements for their business processes. Business process management (BPM) provides organisations with a range of methods, techniques and tools for analysing, managing, and optimising their business operations. However, BPM initiatives within organisations tend to focus on investigating time and resource utilisation inefficiencies, rather than directly on cost inefficiencies. As a result, high-level cost-based managerial decisions are still being made separately from process related decisions. This position paper describes a research agenda that envisages a holistic approach to managing the cost of business operations in a structured manner, by making an explicit link between cost and processes in all phases of the business process management life cycle. We discuss a number of research challenges that need to be addressed in order to realise such an approach as well as findings from some of the initial research outcomes. It is envisioned that the research outcomes will enable organisations to make operational and strategic decisions with confidence based on accurate and real-time cost information about their operations.