587 resultados para ecologically adaptive strategies
Resumo:
A multi-season 15N tracer recovery experiment was conducted on an Oxisol cropped with wheat, maize and sorghum to compare crop N recoveries of different fertilisation strategies and determine the main pathways of N losses that limit N recovery in these agroecosystems. In the wheat and maize seasons, 15N-labelled fertiliser was applied as conventional urea (CONV) and urea coated with a nitrification inhibitor (DMPP). In sorghum, the fate of 15N-labelled urea was monitored in this crop following a legume ley pasture (L70) or a grass ley pasture (G100). The fertiliser N applied to sorghum in the legume-cereal rotation was reduced (70 kg N ha−1) compared to the grass-cereal (100 kg N ha−1) to assess the availability of the N residual from the legume ley pasture. Average crop N recoveries were 73 % (CONV) and 77 % (DMPP) in wheat and 50 % (CONV) and 51 % (DMPP) in maize, while in sorghum were 71 % (L70) and 53 % (G100). Data gathered in this study indicate that the intrinsic physical and chemical conditions of Oxisols can be extremely effective in limiting N losses via deep leaching or denitrification. Elevated crop 15N recoveries can be therefore obtained in subtropical Oxisols using conventional urea while in these agroecosystems DMPP urea has no significant scope to increase fertiliser N recovery in the crop. Overall, introducing a legume phase to limit the fertiliser N requirements of the following cereal crop proved to be the most effective strategy to reduce N losses and increase fertiliser N recovery.
Resumo:
The literature advocates more widespread adoption of a particular type of house – a manufactured high performance green house and/or house components (MHPGH) and this is the focus of the research proposal outlined in this conceptual paper. The aim of the current paper is to outline a robust program of work to improve adoption of MHPGH. The contribution of houses to climate change is investigated, the conservatism of the construction industry is documented, a conceptual framework through which to understand the problem is presented; a program of research to bring about change is outlined; and the benefits of doing so are summarised. The contribution of the paper is the presentation of novel theory and methods to address sustainability problems in the construction industry. Future work will involve execution of the proposal. A limitation of the paper is that the effectiveness of the proposed theory and methods are yet to be tested.
Resumo:
A new mesh adaptivity algorithm that combines a posteriori error estimation with bubble-type local mesh generation (BLMG) strategy for elliptic differential equations is proposed. The size function used in the BLMG is defined on each vertex during the adaptive process based on the obtained error estimator. In order to avoid the excessive coarsening and refining in each iterative step, two factor thresholds are introduced in the size function. The advantages of the BLMG-based adaptive finite element method, compared with other known methods, are given as follows: the refining and coarsening are obtained fluently in the same framework; the local a posteriori error estimation is easy to implement through the adjacency list of the BLMG method; at all levels of refinement, the updated triangles remain very well shaped, even if the mesh size at any particular refinement level varies by several orders of magnitude. Several numerical examples with singularities for the elliptic problems, where the explicit error estimators are used, verify the efficiency of the algorithm. The analysis for the parameters introduced in the size function shows that the algorithm has good flexibility.
Resumo:
A mentor’s feedback can present professional insights to allow a mentee to reflect and develop practice. This paper positions two models for feedback that have emanated from empirical studies. It also demonstrates the diverse viewpoints of mentors and suggests strategies for providing quality feedback. In one qualitative study, 24 mentors observed a final-year preservice teacher through a professionally video-recorded lesson and wrote their observations towards giving feedback to the potential mentee. Tables illustrated in the paper, show that mentors’ positive feedback and constructive criticisms vary considerably on the same observed events. Data from this study were synthesised to posit a theoretical model for analysing mentor feedback in an interconnected, three-way Venn diagram, namely: visual, auditory and conceptual frames. Another study (n=28), which is a collection of mentor teachers’ work samples during the Mentoring for Effective Teaching (MET) program, provides strategies within six feedback practices, that is: (1) negotiated mentor-mentee expectations for providing feedback on practices, (2) reviewing teaching plans, (3) arranging for observations of practices, (4) providing oral feedback, (5) providing written feedback, and; (6) presenting opportunities for the mentee to evaluate teaching practices with consideration of the mentor’s feedback. For example, on the last mentioned practice (6) there were strategies such as “Plan a time for evaluation of practices (guided reflection)”, “Read the mentee’s reflection on practice and discuss how it aligns with your observations of their practices”, and “Highlight verbally and/or in writing where the mentee is perceptive about the reflection and how the reflection could be enhanced for future evaluations”. Developing a range of strategies that may assist the mentee in professional growth, include enlisting a community of mentors, ensuring mentors have a repertoire of strategies for articulating feedback, and using mentor feedback tools and models. This study has implications for the development of feedback models and strategies.
Resumo:
Evidence from economic evaluations is often not used to inform healthcare policy despite being well regarded by policy makers and physicians. This article employs the accessibility and acceptability framework to review the barriers to using evidence from economic evaluation in healthcare policy and the strategies used to overcome these barriers. Economic evaluations are often inaccessible to policymakers due to the absence of relevant economic evaluations, the time and cost required to conduct and interpret economic evaluations, and lack of expertise to evaluate quality and interpret results. Consistently reported factors that limit the translation of findings from economic evaluations into healthcare policy include poor quality of research informing economic evaluations, assumptions used in economic modelling, conflicts of interest, difficulties in transferring resources between sectors, negative attitudes to healthcare rationing, and the absence of equity considerations. Strategies to overcome these barriers have been suggested in the literature, including training, structured abstract databases, rapid evaluation, reporting checklists for journals, and considering factors other than cost effectiveness in economic evaluations, such as equity or budget impact. The factors that prevent or encourage decision makers to use evidence from economic evaluations have been identified, but the relative importance of these factors to decision makers is uncertain.
Resumo:
Review question/objective The objective of this review is to find, critically appraise and synthesize the available quantitative evidence on the effectiveness of interventions that promote successful teaching of the evidence-based practice process in undergraduate health students, in preparation for them to become professional evidence-based practitioners. More specifically, the question that this review seeks to answer is: What is the effectiveness of teaching strategies for evidence-based practice for undergraduate health students? Inclusion criteria Types of participants This review will consider studies that include undergraduate health students from any undergraduate health discipline, including but not limited to medicine, nursing and allied health. Post graduate and post-registration students will not be included. Types of interventions This review will consider studies that evaluate strategies or interventions aimed at teaching any or all of the five steps of evidence-based practice, namely asking a structured clinical question; collecting the best evidence available; critically appraising the evidence to ensure validity, relevance and applicability; applying or integrating the results into clinical practice, and evaluating outcomes. The strategy may take place solely within a tertiary education environment or may be combined with a clinical setting. Types of outcomes This review will consider studies that include the following outcome measures: evidence-based practice behavior, knowledge, skills, attitudes, self-efficacy (or self-confidence), beliefs, values, intention to use evidence-based practice (future use) and confidence levels. Tools used to measure these outcomes will be assessed for reported validity, reliability and generalizability. Outcomes will be measured during the student’s education period up to graduation. If studies are conducted across different year levels this will be taken into account during analysis and reported accordingly.
Resumo:
DNA may take a leading role in a future generation of blockbuster therapeutics. DNA has inherent advantages over other biomolecules such as protein, RNA and virus-like particles including safety, production simplicity and higher stability at ambient temperatures. Vaccination is the principal measure for preventing influenza and reducing the impact of pandemics; however, vaccines take up to 8-9 months to produce, and the global production capacity is woefully low. With production times as short as 2 weeks, improved safety and stability, bioprocess engineering developments, and the ability to perform numerous therapeutic roles, DNA has the potential to meet the demands of emerging and existing diseases. DNA is experiencing sharp growths in demand as indicated by its use in gene therapy trials and DNA vaccine related patents. Of particular interest for therapeutic use is plasmid DNA (pDNA), a form of non-genomic DNA that makes use of cellular machinery to express proteins or antigens. The production stages of fermentation and downstream purification are considered in this article. Forward looking approaches to purifying and delivering DNA are reported, including affinity chromatography and nasal inhalation. The place that pDNA may take in the preparation for and protection against pandemics is considered. If DNA therapeutics and vaccines prove to be effective, the ultimate scale of production will be huge which shall require associated bioprocess engineering research and development for purification of this large, unique biomolecule.
Resumo:
There is a growing awareness of the high levels of psychological distress being experienced by law students and the practising profession in Australia. In this context, a Threshold Learning Outcome (TLO) on self-management has been included in the six TLOs recently articulated as minimum learning outcomes for all Australian graduates of the Bachelor of Laws degree (LLB). The TLOs were developed during 2010 as part of the Australian Learning and Teaching Council’s (ALTC’s) project funded by the Australian Government to articulate ‘Learning and Teaching Academic Standards’. The TLOs are the result of a comprehensive national consultation process led by the ALTC’s Discipline Scholars: Law, Professors Sally Kift and Mark Israel.1 The TLOs have been endorsed by the Council of Australian Law Deans (CALD) and have received broad support from members of the judiciary and practising profession, representative bodies of the legal profession, law students and recent graduates, Legal Services Commissioners and the Law Admissions Consultative Committee. At the time of writing, TLOs for the Juris Doctor (JD) are also being developed, utilising the TLOs articulated for the LLB as their starting point but restating the JD requirements as the higher order outcomes expected of graduates of a ‘Masters Degree (Extended)’, this being the award level designation for the JD now set out in the new Australian Qualifications Framework.2 As Australian law schools begin embedding the learning, teaching and assessment of the TLOs in their curricula, and seek to assure graduates’ achievement of them, guidance on the implementation of the self-management TLO is salient and timely.
Resumo:
The mean shift tracker has achieved great success in visual object tracking due to its efficiency being nonparametric. However, it is still difficult for the tracker to handle scale changes of the object. In this paper, we associate a scale adaptive approach with the mean shift tracker. Firstly, the target in the current frame is located by the mean shift tracker. Then, a feature point matching procedure is employed to get the matched pairs of the feature point between target regions in the current frame and the previous frame. We employ FAST-9 corner detector and HOG descriptor for the feature matching. Finally, with the acquired matched pairs of the feature point, the affine transformation between target regions in the two frames is solved to obtain the current scale of the target. Experimental results show that the proposed tracker gives satisfying results when the scale of the target changes, with a good performance of efficiency.
Resumo:
Adjustable speed induction generators, especially the Doubly-Fed Induction Generators (DFIG) are becoming increasingly popular due to its various advantages over fixed speed generator systems. A DFIG in a wind turbine has ability to generate maximum power with varying rotational speed, ability to control active and reactive by integration of electronic power converters such as the back-to-back converter, low rotor power rating resulting in low cost converter components, etc, DFIG have become very popular in large wind power conversion systems. This chapter presents an extensive literature survey over the past 25 years on the different aspects of DFIG. Application of H8 Controller for enhanced DFIG-WT performance in terms of robust stability and reference tracking to reduce mechanical stress and vibrations is also demonstrated in the chapter.