Landform characterization using geophysics—Recent advances, applications, and emerging tools

This paper presents an overview of the strengths and limitations of existing and emerging geophysical tools for landform studies. The objectives are to discuss recent technical developments and to provide a review of relevant recent literature, with a focus on propagating field methods with terrestrial applications. For various methods in this category, including ground-penetrating radar (GPR), electrical resistivity (ER), seismics, and electromagnetic (EM) induction, the technical backgrounds are introduced, followed by section on novel developments relevant to landform characterization. For several decades, GPR has been popular for characterization of the shallow subsurface and in particular sedimentary systems. Novel developments in GPR include the use of multi-offset systems to improve signal-to-noise ratios and data collection efficiency, amongst others, and the increased use of 3D data. Multi-electrode ER systems have become popular in recent years as they allow for relatively fast and detailed mapping. Novel developments include time-lapse monitoring of dynamic processes as well as the use of capacitively-coupled systems for fast, non-invasive surveys. EM induction methods are especially popular for fast mapping of spatial variation, but can also be used to obtain information on the vertical variation in subsurface electrical conductivity. In recent years several examples of the use of plane wave EM for characterization of landforms have been published. Seismic methods for landform characterization include seismic reflection and refraction techniques and the use of surface waves. A recent development is the use of passive sensing approaches. The use of multiple geophysical methods, which can benefit from the sensitivity to different subsurface parameters, is becoming more common. Strategies for coupled and joint inversion of complementary datasets will, once more widely available, benefit the geophysical study of landforms.Three cases studies are presented on the use of electrical and GPR methods for characterization of landforms in the range of meters to 100. s of meters in dimension. In a study of polygonal patterned ground in the Saginaw Lowlands, Michigan, USA, electrical resistivity tomography was used to characterize differences in subsurface texture and water content associated with polygon-swale topography. Also, a sand-filled thermokarst feature was identified using electrical resistivity data. The second example is on the use of constant spread traversing (CST) for characterization of large-scale glaciotectonic deformation in the Ludington Ridge, Michigan. Multiple CST surveys parallel to an ~. 60. m high cliff, where broad (~. 100. m) synclines and narrow clay-rich anticlines are visible, illustrated that at least one of the narrow structures extended inland. A third case study discusses internal structures of an eolian dune on a coastal spit in New Zealand. Both 35 and 200. MHz GPR data, which clearly identified a paleosol and internal sedimentary structures of the dune, were used to improve understanding of the development of the dune, which may shed light on paleo-wind directions.

Micro foundations of strategic capability development : a case study within the auto industry

The importance of firms’ adaptation processes is prominent in today’s business environment which is characterised by ever changing customers, technologies, and competition. Ever since Schumpeter’s (1942) classic work strategic renewal has been found crucial for firms’ adaptation to environmental change. The role of strategic renewal in firms’ adaptation processes includes development of capabilities for the purpose of sustainability of competitive advantage against environmental changes.

Changing views of culture, learning, teaching, and knowledge : Fiji in-service primary teachers

This paper explores in-service primary teachers' views and beliefs about culture, learning, teaching and knowledge. Fifty Bachelor of Education in-service primary teachers at a university in Fiji participated in the study. The analysis reveals a mix of old and new beliefs about culture, learning teaching and knowledge. The influence of globalization of technology is a contributing factor towards changing views. To keep the indigenous epistemologies alive and valued like the Western epistemologies, more effort is needed to integrate these in formal education. This has implications for the future professional preparation of pre-service and in-service teachers.

Enhancing methacrylate-monolith-based downstream processes to champion plasmid DNA production

Increasing numbers of preclinical and clinical studies are utilizing pDNA (plasmid DNA) as the vector. In addition, there has been a growing trend towards larger and larger doses of pDNA utilized in human trials. The growing demand on pDNA manufacture leads to pressure to make more in less time. A key intervention has been the use of monoliths as stationary phases in liquid chromatography. Monolithic stationary phases offer fast separation to pDNA owing to their large pore size, making pDNA in the size range from 100 nm to over 300 nm easily accessible. However, the convective transport mechanism of monoliths does not guarantee plasmid purity. The recovery of pure pDNA hinges on a proper balance in the properties of the adsorbent phase, the mobile phase and the feedstock. The effects of pH and ionic strength of binding buffer, temperature of feedstock, active group density and the pore size of the stationary phase were considered as avenues to improve the recovery and purity of pDNA using a methacrylate-based monolithic adsorbent and Escherichia coli DH5α-pUC19 clarified lysate as feedstock. pDNA recovery was found to be critically dependent on the pH and ionic strength of the mobile phase. Up to a maximum of approx. 92% recovery was obtained under optimum conditions of pH and ionic strength. Increasing the feedstock temperature to 80°C increased the purity of pDNA owing to the extra thermal stability associated with pDNA over contaminants such as proteins. Results from toxicological studies of the plasmid samples using endotoxin standard (E. coli 0.55:B5 lipopolysaccharide) show that endotoxin level decreases with increasing salt concentration. It was obvious that large quantities of pure pDNA can be obtained with minimal extra effort simply by optimizing process parameters and conditions for pDNA purification.

A C-ITS based lane changing advisory for weaving sections

This study examines the benefits of Cooperative Intelligent Transport Systems (C-ITS) in weaving sections. The research proposes a lane-changing advisory application to alleviate the lane-changing concentration in weaving sections by coordinating weaving vehicles. While non-weaving vehicles travel as normal, weaving vehicles are monitored and advised through personalized messages based on their destination lane. The findings of this research, derived from a microscopic simulation in AIMSUN, reveal that the proposed strategy has the potential to improve delay significantly and that it can be applied to any existing one-sided weaving sections.

Clinton, Bush, and Obama : changing policy and rhetoric in the United States Annual Trafficking in Persons Report

This chapter charts the political transitions in the anti-trafficking agenda and rhetoric of the U.S. Government across three Presidential administrations through a detailed examination of the annual Trafficking in Persons reports released by the Office to Monitor and Combat Trafficking in Persons between 2001 and 2012. We argue that the transitions in language and focus reflect key tensions that have dominated trafficking discourse throughout the Clinton, Bush and Obama Presidencies. These fissures include debate over law enforcement versus rights-based frameworks, competing approaches on victim protection and identification, and ongoing disputes about the relationship between prostitution and human trafficking.

On Merging Business Process Management and Geographic Information Systems : Modeling and Execution of Ecological Concerns in Processes

Business Process Management describes a holistic management approach for the systematic design, modeling, execution, validation, monitoring and improvement of organizational business processes. Traditionally, most attention within this community has been given to control-flow aspects, i.e., the ordering and sequencing of business activities, oftentimes in isolation with regards to the context in which these activities occur. In this paper, we propose an approach that allows executable process models to be integrated with Geographic Information Systems. This approach enables process models to take geospatial and other geographic aspects into account in an explicit manner both during the modeling phase and the execution phase. We contribute a structured modeling methodology, based on the well-known Business Process Model and Notation standard, which is formalized by means of a mapping to executable Colored Petri nets. We illustrate the feasibility of our approach by means of a sustainability-focused case example of a process with important ecological concerns.

Changing the company name : a model for identity change through communication

In an ever evolving business landscape, change is an ever present part of any organisation’s lifecycle. This thesis presents communication as a fundamental element of effective change management. Drawing from the existing change communication literature and two case studies, this thesis examines how organisations utilise strategic change communication to manage identity change. As a result this study presents a conceptual model that outlines a process of change communication strategy and implementation. This model is offered as a step toward connecting important scholarship into a more comprehensive portrait of change communication during identity change than so far has been available.

Changing influences on the concept of ‘media influence’

The concept of media influence has a long history in media and communication studies, and has also had significant influence on public policy. This article revisits questions of media influence through three short case studies. First, it critically analyses the strongly partisan position of News Corporation’s newspapers against the Labor government during the 2013 Australian Federal election to consider whether the potential for media influence equated to the effective use of media power. Second, it discusses the assumption in broadcasting legislation, in both the United Kingdom and Australia, that terrestrial broadcasting should be subject to more content regulation than subscription services, and notes the new challenges arising from digital television and over-the-top video streaming services. Finally, it discusses the rise of multi-platform global content aggregators such as Google, Apple, Microsoft and others, and how their rise necessitates changes in ways of thinking about concentration of media ownership, and regulations that may ensue from it.

Market segmentation : insights for changing children's physical activity behaviour

Market segmentation has received relatively limited attention in social marketing, particularly within the context of changing children’s physical activity behaviour. This is an important area of investigation given growing concern over childhood obesity globally. The present research aims to extend current understanding of the applicability of market segmentation within this context. The results of a two-step cluster analysis on data from 512 respondents of an online survey show three distinct segments of caregivers, each with unique beliefs about their primary school children walking to/from school. The results demonstrate the validity of employing the process of market segmentation within this social context and provide further insights for targeting the identified segments through tailored social marketing programs.