The garden of Australian dreams: The moral rights of landscape architects

This article considers the moral rights controversy over plans to redesign the landscape architecture of the National Museum of Australia. This dispute raises issues about the nature and scope of moral rights; the professional standing of landscape architects; and the culture wars taking place in Australia. Part 1 considers the introduction of the Copyright Amendment (Moral Rights) Act 2000 (Cth), with its special regime for architecture and public sculpture. It focuses upon a number of controversies which have arisen in respect of copyright law and architecture - involving the National Gallery of Australia, the National Museum of Australia, the Pig ’n Whistle pub, the South Bank redevelopment, and the new Parliament House. Part 2 examines the dispute over the Garden of Australian Dreams. The controversy is a striking one - as the Australian Government sought to subvert the spirit of its own legislation, the Copyright Amendment (Moral Rights) Act 2000 (Cth). Part 3 engages in a comparative study of how copyright law and architecture are dealt with in other jurisdictions. In particular, it considers the dual operation of the Architectural Works Copyright Act 1990 (US) and the Visual Artists Rights Act 1990 (US) and a number of controversies in the United States - over the Tilted Arc sculpture, a Los Angeles tower block that appeared in the film Batman Forever, a community garden mural, a sculpture park, and the Freedom Tower.

Functional and structural of the erector spinae muscle during isometric lumbar extension

Study Design Cross-sectional study. Objectives To compare erector spinae (ES) muscle fatigue between chronic non-specific lower back pain (CNLBP) sufferers and healthy subjects from a biomechanical perspective during fatiguing isometric lumbar extensions. Background Paraspinal muscle maximal contraction and fatigue are used as a functional predictor for disabilities. The simplest method to determine muscle fatigue is by evaluating the evolution during specific contractions, such as isometric contractions. There are no studies that evaluate the evolution of the ES muscle during fatiguing isometric lumbar extensions and analyse functional and architectural variables. Methods In a pre-calibrated system, participants performed a maximal isometric extension of the lumbar spine for 5 and 30 seconds. Functional variables (torque and muscle activation) and architecture (pennation angle and muscle thickness) were measured using a load cell, surface electromyography and ultrasound, respectively. The results were normalised and a reliability study of the ultrasound measurement was made. Results: The ultrasound measurements were highly reliable, with Cronbach’s alpha values ranging from 0.951 0.981. All measured variables shown significant differences before and after fatiguing isometric lumbar extension. Conclusion During a lumbar isometric extension test, architecture and functional variables of the ES muscle could be analised using ultrasound, surface EMG and load cell. In adition, during an endurance test, ES muscle suffers an acute effect on architectural and functional variables.

Ability to discriminate between healthy and low back pain sufferers using ultrasound during maximum lumbar extension

Objective To analyze the ability to discriminate between healthy individuals and individuals with chronic nonspecific low back pain (CNLBP) by measuring the relation between patient-reported outcomes and objective clinical outcome measures of the erector spinae (ES) muscles using an ultrasound during maximal isometric lumbar extension. Design Cross-sectional study with screening and diagnostic tests with no blinded comparison. Setting University laboratory. Participants Healthy individuals (n=33) and individuals with CNLBP (n=33). Interventions Each subject performed an isometric lumbar extension. With the variables measured, a discriminate analysis was performed using a value ≥6 in the Roland and Morris disability questionnaire (RMDQ) as the grouping variable. Then, a logistic regression with the functional and architectural variables was performed. A new index was obtained from each subject value input in the discriminate multivariate analysis. Main Outcome Measures Morphologic muscle variables of the ES muscle were measured through ultrasound images. The reliability of the measures was calculated through intraclass correlation coefficients (ICCs). The relation between patient-reported outcomes and objective clinical outcome measures was analyzed using a discriminate function from standardized values of the variables and an analysis of the reliability of the ultrasound measurement. Results The reliability tests show an ICC value >.95 for morphologic and functional variables. The independent variables included in the analysis explained 42% (P=.003) of the dependent variable variance. Conclusions The relation between objective variables (electromyography, thickness, pennation angle) and a subjective variable (RMDQ ≥6) and the capacity of this relation to identify CNLBP within a group of healthy subjects is moderate. These results should be considered by clinicians when treating this type of patient in clinical practice.

Introduction to the Proceedings of the Workshop on User-Focused Service Engineering, Consumption and Aggregation (USECA) 2011

The first User-Focused Service Engineering, Consumption and Aggregation workshop (USECA) in 2011 was held in conjunction with the WISE 2011 conference in Sydney, Australia. Web services and related technology are a widely accepted standard architectural paradigm for application development. The idea of reusing existing software components to build new applications has been well documented and supported for the world of enterprise computing and professional developers. However, this powerful idea has not been transferred to end-users who have limited or no computing knowledge. The current methodologies, models, languages and tools developed for Web service composition are suited to IT professionals and people with years of training in computing technologies. It is still hard to imagine any of these technologies being used by business professionals, as opposed to computing professionals. © 2013 Springer-Verlag.

Bruno Taut’s design inspiration for the Glashaus

As a formative exemplar of early architectural modernism, Bruno Taut’s seminal exhibition pavilion the Glashaus (literally translated Glasshouse) is logically part of the important debate of rethinking the origins of modernism. However, the historical record of Bruno Taut’s Glashaus has been primarily established by one art historian and critic. As a result the historical record of the Glashaus is significantly skewed toward a singlular notion of Expressionism and surprisingly excludes Taut’s diverse motives for the design of the building. In an effort to clarify the problematic historical record of the Glashaus, this book exposes Bruno Taut’s motives and inspirations for its design. The result is that Taut’s motives can be found in yet unacknowledged precedents like the botanical inspiration of the Victoria regia lily; the commercial interests of Frederick Keppler as the Director of the Deutche Luxfer Prismen Syndikat; and imitation that derived openly from the Gothic. The outcome is a substantial contribution to the re-evaluation of the generally accepted histories of the modern movement in architecture.

A happy compromise: Collaborative approaches to school library designing

Designing a school library is a complex, costly and demanding process with important educational and social implications for the whole school community. Drawing upon recent research, this paper presents contrasting snapshots of two school libraries to demonstrate the impacts of greater and lesser collaboration in the designing process. After a brief literature review, the paper outlines the research design (qualitative case study, involving collection and inductive thematic analysis of interview data and student drawings). The select findings highlight the varying experiences of each school’s teacher-librarian through the four designing phases of imagining, transitioning, experiencing and reimagining. Based on the study’s findings, the paper concludes that design outcomes are enhanced through collaboration between professional designers and key school stakeholders including teacher-librarians, teachers, principals and students. The findings and recommendations are of potential interest to teacher-librarians, school principals, education authorities, information professionals and library managers, to guide user-centred library planning and resourcing.

The role of knowledge integration in innovation and capability development

Purpose This paper investigates the interrelationships between knowledge integration (KI), product innovation and capability development to enhance our understanding of how firms can develop capability at the firm level, which in turn enhances their performance. One of the critical underlying mechanisms for capability building identified in the literature is the role of knowledge integration, which operates within product innovation projects and contributes to dynamic capability development. Therefore, the main research question is “how does the integration of knowledge across product innovation projects lead to the development of capability?” Design/methodology/approach We adopted a case-based approach and investigated the case of a successful firm that was able to sustain its performance through a series of product innovation projects. In particular this research focused on the role of KI and firm-level capability development over the course of four projects, during which the firm successfully managed the transformation of its product base and renewal of its competitive advantage. For this purpose an in-depth case study of capability development was undertaken at the Iran Khodro Company (IKCO), the key player in the Iranian auto industry transformation. Originality/value This research revealed that along with changes at each level of product architecture “design knowledge” and “design capability” have been developed at the same level of product architecture, leading to capability development at that level. It can be argued that along the step by step maturation of radical innovation across the four case projects, architectural knowledge and capability have been developed at the case company, resulting in the gradual emergence of a modular product and capability architecture across different levels of product architecture. Such findings basically add to extensive emphasis in the literature on the interrelationship of the concept of modularity with knowledge management and capability development. Practical implications Findings of this study indicate that firms manage their knowledge in accordance with the level of specialization in knowledge and capability. Furthermore, firms design appropriate knowledge integration mechanisms within and among functions in order dynamically align knowledge processes at different levels of the product architecture. Accordingly, the outcomes of this study may guide practitioners in managing their knowledge processes, through dynamically employing knowledge integration modes step-by-step and from the part level to the architectural level of product architecture across a sequence of product innovation projects to encourage learning and radical innovation.

Design guidance for blast-resistant glazing

This paper reviews current design standards and test methods for blast-resistant glazing design and compares a typical design outcome with that from comprehensive finite-element (FE) analysis. Design standards are conservative and are limited to the design of relatively small glazed panels. Standard test methods are expensive, create environmental pollution, and can classify the hazard ratings of only smaller glazed panels. Here the design of a laminated glass (LG) panel is carried out according to an existing design standard, and then its performance is examined using comprehensive FE modeling and analysis. Finite-element results indicate that both glass panes crack, the interlayer yields with little damage, and the sealant joints do not fail for the designed blast load. This failure pattern satisfies some of the requirements for minimal hazard rating in the design standard. It is evident that interlayer thickness and material properties are important during the post-crack stage of an LG panel, but they are not accounted for in the design standards. The new information generated in this paper will contribute toward an enhanced blast design of LG panels.

A 4D automatic simulation tool for construction resource planning: A case study

Purpose Traditional construction planning relies upon the critical path method (CPM) and bar charts. Both of these methods suffer from visualization and timing issues that could be addressed by 4D technology specifically geared to meet the needs of the construction industry. This paper proposed a new construction planning approach based on simulation by using a game engine. Design/methodology/approach A 4D automatic simulation tool was developed and a case study was carried out. The proposed tool was used to simulate and optimize the plans for the installation of a temporary platform for piling in a civil construction project in Hong Kong. The tool simulated the result of the construction process with three variables: 1) equipment, 2) site layout and 3) schedule. Through this, the construction team was able to repeatedly simulate a range of options. Findings The results indicate that the proposed approach can provide a user-friendly 4D simulation platform for the construction industry. The simulation can also identify the solution being sought by the construction team. The paper also identifies directions for further development of the 4D technology as an aid in construction planning and decision-making. Research limitations/implications The tests on the tool are limited to a single case study and further research is needed to test the use of game engines for construction planning in different construction projects to verify its effectiveness. Future research could also explore the use of alternative game engines and compare their performance and results. Originality/value The authors proposed the use of game engine to simulate the construction process based on resources, working space and construction schedule. The developed tool can be used by end-users without simulation experience.

Re-valuing construction materials and components through design for disassembly

The construction industry accounts for a significant portion of the material consumption of our industrialised societies. That material consumption comes at an environmental cost, and when buildings and infrastructure projects are demolished and discarded, after their useful lifespan, that environmental cost remains largely unrecovered. The expected operational lifespan of modern buildings has become disturbingly short as buildings are replaced for reasons of changing cultural expectations, style, serviceability, locational obsolescence and economic viability. The same buildings however are not always physically or structurally obsolete; the materials and components within them are very often still completely serviceable. While there is some activity in the area of recycling of selected construction materials, such as steel and concrete, this is almost always in the form of down cycling or reprocessing. Very little of this material and component resource is reuse in a way that more effectively captures its potential. One significant impediment to such reuse is that buildings are not designed in a way that facilitates easy recovery of materials and components; they are designed and built for speed of construction and quick economic returns, with little or no consideration of the longer term consequences of their physical matter. This research project explores the potential for the recovery of materials and components if buildings were designed for such future recovery; a strategy of design for disassembly. This is not a new design philosophy; design for disassembly is well understood in product design and industrial design. There are also some architectural examples of design for disassembly; however these are specialist examples and there is no significant attempt to implement the strategy in the main stream construction industry. This paper presents research into the analysis of the embodied energy in buildings, highlighting its significance in comparison with operational energy. Analysis at material, component, and whole-of-building levels shows the potential benefits of strategically designing buildings for future disassembly to recover this embodied energy. Careful consideration at the early design stage can result in the deconstruction of significant portions of buildings and the recovery of their potential through higher order reuse and upcycling.

Caught in the act of collaboration: Students’ experiences of collective learning within a real-world design studio context

This study is an evaluation of design students’ perceptions of the benefits of collective learning in a real-world collaborative design studio. Third year students worked in inter-disciplinary teams representing architecture, interior design, landscape architecture, and industrial design. Responding to a real-world brief and in consultation with an industry partner client and early childhood education pre-service teachers, the teams were required to collectively propose a design response for a community-based child and family centre, on an iconic koala sanctuary site. Data were collected using several methods including a participatory action research method, through the form of a large analogue, collaborative jigsaw puzzle. Using a grounded theory methodology, qualitative data were thematically analysed to reveal six distinct aspects of collaboration, which positively impacted the students’ learning experience. The results of this study include recommendations for improving real world collaboration in the design studio in preparation for students’ transition into professional practice.

Bouncing back : Students learning through real-world experiences

The Bouncing Back research study, which began after the Queensland flooding in January 2011, has organically expanded through a number of architectural student design projects and exhibitions, which have sought to respond to catastrophic flooding events. In September 2011, 10 Queensland University of Technology architecture students travelled to Sydney to help construct a 1:1 true-to-life scale shelter, for the Emergency Shelter Exhibition at Customs House in Circular Quay. During the construction of the shelter, data were collected in situ, through dynamic interviews with the students. Using a grounded theory methodology, data were coded and then thematically analysed, to reveal three influential factors that positively impacted the students’ learning in this informal context. These were the student experience, the process of learning through physical making/fabrication, and development of empathy with the community. Analysis of these three factors demonstrated how this informal situated learning activity promoted vitally important learning in a real-world context, which is difficult to replicate in a physical on-campus environment.

Overview of design concepts of traditional Iranian architecture and its reflections in Iranian contemporary architecture

This article has attempted to investigate the patterns of traditional architecture in Iran's warm and dry climate and whether these patterns have been attended to in Iran's contemporary architecture or not. Since the two elements of culture and climate are much significant in Iran's traditional constructions, this article aimed at dealing with subjects such as the causes of the shapes of traditional buildings in Iran's warm and dry climate in constructions like houses, schools, mosques and bazaars, and why they were constructed in those shapes, and also considering their patterns in these places in the light of cultural and climatic aspects, and their cultural and climatic relationships and investigating cultural-climatic causes of the directions and situations designed for the spaces present in these buildings and finally it is intended to classify the conceptual patterns of the traditional architecture of Iran's warm and dry climate. The article is going to consider the amount of using these patterns in Iran's contemporary architecture. The study has been conducted using library and field method.

LED lighting design strategies to enhance window appearance and increase energy savings in daylit office spaces

Vertical windows are the most common and simplest method to introduce daylight to interior spaces of office buildings, while also providing a view and connection to the outside. However, high contrast ratios between windows and surrounding surfaces can cause visual discomfort for occupants and can negatively influence their health and productivity. Consequently, building occupants may try to adapt their working environment through closing blinds and turning on lights in order to improve indoor visual comfort. Such interventions defeat the purpose of daylight harvesting systems and can increase the forecast electric lighting consumption in buildings that include such systems. A simple strategy to prevent these problematic consequences is to reduce the luminance contrasts presented by the window wall by increasing the luminance of areas surrounding the window through the sparing use of energy-efficient supplementary lighting, such light emitting diodes (LEDs). This paper presents the result of a pilot study in typical office in Brisbane, Australia that tests the effectiveness of a supplementary LED lighting system. The study shows an improvement in the appraisal of the visual environment is achieved using the supplementary system, along with up to 88% reductions in luminance contrast at the window wall. Also observed is a 36% reduction in the likelihood of user interventions that would increase energy usage. These results are used as the basis of an annual energy simulation of the test office and indicate that supplementary systems could be used to save energy beyond what is typically realised in side lit office spaces.

Improving the impact of luminance contrast on the window appearance in a conventional office room: Using supplementary lighting strategies

High contrast ratios between windows and surrounding surfaces could cause reduced visibility or discomfort for occupants. Consequently, building users may choose to intervene in lighting conditions through closing blinds and turning on the lamps in order to enhance indoor visual comfort. Such interventions increase projected electric lighting use in buildings. One simple method to prevent these problematic issues is increasing the luminance of the areas surrounding to the bright surface of windows through the use of energy-efficient supplementary lighting, such Light Emitting Diodes (LEDs). This paper reports on the results of a pilot study in conventional office in Brisbane, Australia. The outcomes of this study indicated that a supplementary LED system of approximately 18 W could reduce the luminance contrast on the window wall from values in the order of 117:1 to 33:1. In addition, the results of this experiment suggested that this supplementary strategy could increase the subjective scale appraisal of window appearance by approximately 33%, as well as reducing the likelihood of users’ intention to turn on the ceiling lights by about 27%. It could also diminish the likelihood of occupants’ intention to move the blind down by more than 90%.