Making decisions about antibiotic use in the Australian primary healthcare sector

Introduction Australia is contributing to the global problem of antimicrobial resistance with one of the highest rates of antibiotic use amongst OECD countries. Data from the Australian primary healthcare sector suggests unnecessary antibiotics were prescribed for conditions that will resolve without it. If left unchecked, this will result in more resistant micro-organisms, against which antibiotics will be useless. There is a lack of understanding about what is influencing decisions to use antibiotics – what factors influences general practitioners (GPs) to prescribe antibiotics, consumers to seek antibiotics, and pharmacists to fill old antibiotic prescriptions? It is also not clear how these individuals trade-off between the possible benefits that antibiotics may provide in the immediate/short term, against the longer term societal risk of antimicrobial resistance. Method This project will investigate (a) what factors drive decisions to use antibiotics for GPs, pharmacists and consumers, and (b) how these individuals discount the future. Factors will be gleaned from published literature and from a qualitative phase using semi-structured interviews, to inform the development of Discrete Choice Experiments (DCEs). Three DCEs will be constructed – one for each group of interest – to allow investigation of which factors are more important in influencing (a) GPs to prescribe antibiotics, (b) consumers to seek antibiotics, and (c) pharmacists to fill legally valid but old or repeat prescriptions of antibiotics. Regression analysis will be conducted to understand the relative importance of these factors. A Time Trade Off exercise will be developed to investigate how these individuals discount the future, and whether GPs and pharmacists display the same extent of discounting the future, as consumers. Expected Results Findings from the DCEs will provide an insight into which factors are more important in driving decision making in antibiotic use for GPs, pharmacists and consumers. Findings from the Time Trade Off exercise will show what individuals are willing to trade for preserving the miracle of antibiotics. Conclusion The emergence of antibiotic resistance is inevitable. This research will expand on what is currently known about influencing desired behaviour change in antibiotic use, in the fight against antibiotic resistance. Real World Implications Research findings will contribute to existing national programs to bring about a reduction in inappropriate use of antibiotic in Australia. Specifically, influencing (1) how key messages and public health campaigns are crafted to increase health literacy, and (2) clinical education and empowerment of GPs and pharmacists to play a more responsive role as stewards of antibiotic use in the community.

Differential effects of refractive blur on day and night-time driving performance

Purpose To investigate the effect of different levels of refractive blur on real-world driving performance measured under day and nighttime conditions. Methods Participants included 12 visually normal, young adults (mean age = 25.8 ± 5.2 years) who drove an instrumented research vehicle around a 4 km closed road circuit with three different levels of binocular spherical refractive blur (+0.50 diopter sphere [DS], +1.00 DS, +2.00 DS) compared with a baseline condition. The subjects wore optimal spherocylinder correction and the additional blur lenses were mounted in modified full-field goggles; the order of testing of the blur conditions was randomized. Driving performance was assessed in two different sessions under day and nighttime conditions and included measures of road signs recognized, hazard detection and avoidance, gap detection, lane-keeping, sign recognition distance, speed, and time to complete the course. Results Refractive blur and time of day had significant effects on driving performance (P < 0.05), where increasing blur and nighttime driving reduced performance on all driving tasks except gap judgment and lane keeping. There was also a significant interaction between blur and time of day (P < 0.05), such that the effects of blur were exacerbated under nighttime driving conditions; performance differences were evident even for +0.50 DS blur relative to baseline for some measures. Conclusions The effects of blur were greatest under nighttime conditions, even for levels of binocular refractive blur as low as +0.50 DS. These results emphasize the importance of accurate and up-to-date refractive correction of even low levels of refractive error when driving at night.

'Women on a Wiki’ : the role of interactive websites in reflective learning practices for undergraduate women’s health students

Aim Our pedagogical research addressed the following research questions: 1) Can shared ‘cyber spaces’, such as a ‘wiki’, be occupied by undergraduate women’s health students to improve their critical thinking skills? 2) What are the learning processes via which this occurs? 3) What are the implications of this assessment trial for achieving learning objectives and outcomes in future public health undergraduate courses? Methods The students contributed written, critical reflections (approximately 250 words) to the Wiki each week following the lecture. Students reflected on a range of topics including the portrayal of women in the media, femininity, gender inequality, child bearing and rearing, domestic violence, mental health, Indigenous women, older women, and LGBTIQ communities. Their entries were anonymous, but visible to their peers. Each wiki entry contained a ‘discussion tab’ wherein online conversations were initiated. We used a social constructivist approach to grounded theory to analyse the 480 entries posted over the semester. (http://pub336womenshealth.wikispaces.com/) Results The social constructivist approach initiated by Vygotsky (1978) and further developed by Jonasson (1994) was used to analyse the students’ contributions in relation to four key thematic outcomes including: 1) Complexities in representations across contexts; 2) Critical evaluation in real world scenarios; 3) Reflective practice based on experience, and; 4) Collaborative co-construction of knowledge. Both text and image/visual contributions are provided as examples within each of these learning processes. A theoretical model depicting the interactive learning processes that occurred via discussion of the textual and visual stimulus is presented.

A case study of utilising concept knowledge in a topic specific document collection

The use of ‘topic’ concepts has shown improved search performance, given a query, by bringing together relevant documents which use different terms to describe a higher level concept. In this paper, we propose a method for discovering and utilizing concepts in indexing and search for a domain specific document collection being utilized in industry. This approach differs from others in that we only collect focused concepts to build the concept space and that instead of turning a user’s query into a concept based query, we experiment with different techniques of combining the original query with a concept query. We apply the proposed approach to a real-world document collection and the results show that in this scenario the use of concept knowledge at index and search can improve the relevancy of results.

Experiential brand deployment : improving tourism brand evaluations

This article examines the use of an experiential branding process to help leisure resort businesses evaluate their brand. We integrate experiential marketing and the quality function development approach in combination to help understand the brand from the perspectives of both the consumer and firm, to help resort service businesses build their experience-oriented competitive brands. The value of this study is that it provides a real-world brand framework, especially those resorts with limited resources. Much is spoken about the influence of the brand and why it is important, but little is known about decisions related to developing a brand, especially for firms that have limited resources such as resort tourism operators. Tourism operators tend to be small-to-medium enterprises that do not necessarily have the capacity to do everything suggested. Therefore, we explore how firms assess the critical elements of their brand by using an integrated approach. For example, the study finds that, first, by using the quality function development method resorts can identify the most critical brand elements, and second, we identify the associated strengths of each brand element and confirm the identified resort’s critical brand elements for investment. Results show the potential strategies to create a more holistic set of experiences.

Pre-processing for approximate Bayesian computation in image analysis

Most of the existing algorithms for approximate Bayesian computation (ABC) assume that it is feasible to simulate pseudo-data from the model at each iteration. However, the computational cost of these simulations can be prohibitive for high dimensional data. An important example is the Potts model, which is commonly used in image analysis. Images encountered in real world applications can have millions of pixels, therefore scalability is a major concern. We apply ABC with a synthetic likelihood to the hidden Potts model with additive Gaussian noise. Using a pre-processing step, we fit a binding function to model the relationship between the model parameters and the synthetic likelihood parameters. Our numerical experiments demonstrate that the precomputed binding function dramatically improves the scalability of ABC, reducing the average runtime required for model fitting from 71 hours to only 7 minutes. We also illustrate the method by estimating the smoothing parameter for remotely sensed satellite imagery. Without precomputation, Bayesian inference is impractical for datasets of that scale.

Pollen image classification using the classifynder system: Algorithm comparison and a case study on New Zealand honey

We describe an investigation into how Massey University’s Pollen Classifynder can accelerate the understanding of pollen and its role in nature. The Classifynder is an imaging microscopy system that can locate, image and classify slide based pollen samples. Given the laboriousness of purely manual image acquisition and identification it is vital to exploit assistive technologies like the Classifynder to enable acquisition and analysis of pollen samples. It is also vital that we understand the strengths and limitations of automated systems so that they can be used (and improved) to compliment the strengths and weaknesses of human analysts to the greatest extent possible. This article reviews some of our experiences with the Classifynder system and our exploration of alternative classifier models to enhance both accuracy and interpretability. Our experiments in the pollen analysis problem domain have been based on samples from the Australian National University’s pollen reference collection (2,890 grains, 15 species) and images bundled with the Classifynder system (400 grains, 4 species). These samples have been represented using the Classifynder image feature set.We additionally work through a real world case study where we assess the ability of the system to determine the pollen make-up of samples of New Zealand honey. In addition to the Classifynder’s native neural network classifier, we have evaluated linear discriminant, support vector machine, decision tree and random forest classifiers on these data with encouraging results. Our hope is that our findings will help enhance the performance of future releases of the Classifynder and other systems for accelerating the acquisition and analysis of pollen samples.

Using upper bounds on attainable discrimination to select discrete valued features

Selection of features that will permit accurate pattern classification is a difficult task. However, if a particular data set is represented by discrete valued features, it becomes possible to determine empirically the contribution that each feature makes to the discrimination between classes. This paper extends the discrimination bound method so that both the maximum and average discrimination expected on unseen test data can be estimated. These estimation techniques are the basis of a backwards elimination algorithm that can be use to rank features in order of their discriminative power. Two problems are used to demonstrate this feature selection process: classification of the Mushroom Database, and a real-world, pregnancy related medical risk prediction task - assessment of risk of perinatal death.

A data mining based method for discovery of web services and their compositions

Due to the availability of huge number of web services, finding an appropriate Web service according to the requirements of a service consumer is still a challenge. Moreover, sometimes a single web service is unable to fully satisfy the requirements of the service consumer. In such cases, combinations of multiple inter-related web services can be utilised. This paper proposes a method that first utilises a semantic kernel model to find related services and then models these related Web services as nodes of a graph. An all-pair shortest-path algorithm is applied to find the best compositions of Web services that are semantically related to the service consumer requirement. The recommendation of individual and composite Web services composition for a service request is finally made. Empirical evaluation confirms that the proposed method significantly improves the accuracy of service discovery in comparison to traditional keyword-based discovery methods.

Detecting rare events using Kullback-Leibler divergence

One main challenge in developing a system for visual surveillance event detection is the annotation of target events in the training data. By making use of the assumption that events with security interest are often rare compared to regular behaviours, this paper presents a novel approach by using Kullback-Leibler (KL) divergence for rare event detection in a weakly supervised learning setting, where only clip-level annotation is available. It will be shown that this approach outperforms state-of-the-art methods on a popular real-world dataset, while preserving real time performance.

Practical path planning and obstacle avoidance for autonomous mowing

There is a need for systems which can autonomously perform coverage tasks on large outdoor areas. Unfortunately, the state-of-the-art is to use GPS based localization, which is not suitable for precise operations near trees and other obstructions. In this paper we present a robotic platform for autonomous coverage tasks. The system architecture integrates laser based localization and mapping using the Atlas Framework with Rapidly-Exploring Random Trees path planning and Virtual Force Field obstacle avoidance. We demonstrate the performance of the system in simulation as well as with real world experiments.

Towards coordinated vision-based docking using an Autonomous Surface Vehicle

This paper describes the development and experimental evaluation of a novel vision-based Autonomous Surface Vehicle with the purpose of performing coordinated docking manoeuvres with a target, such as an Autonomous Underwater Vehicle, on the water’s surface. The system architecture integrates two small processor units; the first performs vehicle control and implements a virtual force obstacle avoidance and docking strategy, with the second performing vision-based target segmentation and tracking. Furthermore, the architecture utilises wireless sensor network technology allowing the vehicle to be observed by, and even integrated within an ad-hoc sensor network. The system performance is demonstrated through real-world experiments.

Automated sensory data alignment for environmental and epidermal change monitoring

In this paper we present research adapting a state of the art condition-invariant robotic place recognition algorithm to the role of automated inter- and intra-image alignment of sensor observations of environmental and skin change over time. The approach involves inverting the typical criteria placed upon navigation algorithms in robotics; we exploit rather than attempt to fix the limited camera viewpoint invariance of such algorithms, showing that approximate viewpoint repetition is realistic in a wide range of environments and medical applications. We demonstrate the algorithms automatically aligning challenging visual data from a range of real-world applications: ecological monitoring of environmental change, aerial observation of natural disasters including flooding, tsunamis and bushfires and tracking wound recovery and sun damage over time and present a prototype active guidance system for enforcing viewpoint repetition. We hope to provide an interesting case study for how traditional research criteria in robotics can be inverted to provide useful outcomes in applied situations.

Teaching dispute resolution in the first year for law student well-being

At the QUT Law School, the most recent curriculum review responded to an increasing demand from the profession for law graduates to be equipped with dispute resolution knowledge, skills and attitudes. From 2015, a compulsory dispute resolution subject will be a critical part of an intentionally designed core first year curriculum. It is important for the Law School at QUT that no graduate of the new curriculum will leave our institution without real world dispute resolution knowledge and skills. This initiative is also grounded in evidenced-based research about the benefits for student well-being that derive from the subject content and pedagogy of dispute resolution. This paper explains why teaching dispute resolution in the first year of the law degree is an important strategy for promoting the well-being of law students.

Corner detection in images under different noise levels

Corner detection has shown its great importance in many computer vision tasks. However, in real-world applications, noise in the image strongly affects the performance of corner detectors. Few corner detectors have been designed to be robust to heavy noise by now, partly because the noise could be reduced by a denoising procedure. In this paper, we present a corner detector that could find discriminative corners in images contaminated by noise of different levels, without any denoising procedure. Candidate corners (i.e., features) are firstly detected by a modified SUSAN approach, and then false corners in noise are rejected based on their local characteristics. Features in flat regions are removed based on their intensity centroid, and features on edge structures are removed using the Harris response. The detector is self-adaptive to noise since the image signal-to-noise ratio (SNR) is automatically estimated to choose an appropriate threshold for refining features. Experimental results show that our detector has better performance at locating discriminative corners in images with strong noise than other widely used corner or keypoint detectors.