Removing organic impurities from bayer process liquors

A process for treating a Bayer liquor by wet oxidn. to oxidize org. contaminants in the Bayer liquor in which the wet oxidn. process is conducted in the presence of a mixed Ce/Mn oxide. The catalyst may have nano-sized grains, and be supported on a mesoporous oxide support. The catalyst may also contain a platinum group metal. [on SciFinder(R)]

System level tests of transformer differential protection using an IEC 61850 process bus

The IEC 61850 family of standards for substation communication systems were released in the early 2000s, and include IEC 61850-8-1 and IEC 61850-9-2 that enable Ethernet to be used for process-level connections between transmission substation switchyards and control rooms. This paper presents an investigation of process bus protection performance, as the in-service behavior of multi-function process buses is largely unknown. An experimental approach was adopted that used a Real Time Digital Simulator and 'live' substation automation devices. The effect of sampling synchronization error and network traffic on transformer differential protection performance was assessed and compared to conventional hard-wired connections. Ethernet was used for all sampled value measurements, circuit breaker tripping, transformer tap-changer position reports and Precision Time Protocol synchronization of sampled value merging unit sampling. Test results showed that the protection relay under investigation operated correctly with process bus network traffic approaching 100% capacity. The protection system was not adversely affected by synchronizing errors significantly larger than the standards permit, suggesting these requirements may be overly conservative. This 'closed loop' approach, using substation automation hardware, validated the operation of protection relays under extreme conditions. Digital connections using a single shared Ethernet network outperformed conventional hard-wired solutions.

Dynamic weaving in aspect oriented business process management

Reducing complexity in Information Systems is an important topic in both research and industry. One strategy to deal with complexity is separation of concerns, which results in less complex, easily maintainable and more reusable systems. Separation of concerns can be addressed through the Aspect Oriented paradigm. Although this paradigm has been well researched in programming, it is still at the preliminary stage in the area of Business Process Management. While some efforts have been made to extend business process modelling with aspect oriented capability, it has not yet been investigated how aspect oriented business process models should be executed at runtime. In this paper, we propose a generic solution to support execution of aspect oriented business process models based on the principle behind dynamic weaving of aspects. This solution is formally specified using Coloured Petri Nets. The resulting formal specification serves as the blueprint to the implementation of a service module in the framework of a state-of-the-art Business Process Management System. Using this developed artefact, a case study is performed in which two simplified processes from real business in the domain of banking are modelled and executed in an aspect oriented manner. Through this case study, we also demonstrate that adoption of aspect oriented modularization increases the reusability while reducing the complexity of business process models in practice.

A process-oriented approach to supporting Off-site Manufacture in construction projects

It is well-known that the use of off-site manufacture (OSM) techniques can assist in timely completion of a construction project though the utilisation of such techniques may have other disadvantages. Currently, OSM uptake within the Australian construction industry is limited. To successfully incorporate OSM practices within a construction project, it is crucial to understand the impact of OSM adoption on the processes used during a construction project. This paper presents how a systematic process-oriented approach may be able to support OSM utilisation within a construction project. Process modelling, analysis and automation techniques which are well-known within the Business Process Management (BPM) discipline have been applied to develop a collection of construction process models that represent the end-to-end generic construction value chain. The construction value chain enables researchers to identify key activities, resources, data, and stakeholders involved in construction processes in each defined construction phase. The collection of construction process models is then used as a basis for identification of potential OSM intervention points in collaboration with domain experts from the Australian construction industry. This ensures that the resulting changes reflect the needs of various stakeholders within the construction industry and have relevance in practice. Based on the input from the domain experts, these process models are further refined and operational requirements are taken into account to develop a prototype process automation (workflow) system that can support and coordinate OSM-related process activities. The resulting workflow system also has the potential to integrate with other IT solutions used within the construction industry (e.g., BIM, Acconex). As such, the paper illustrates the role that process-oriented thinking can play in assisting OSM adoption within the industry.

Child complainants and the court process in Australia

In recent years, it has been recognised that child complainants in the criminal justice system can experience difficulties over and above those of other complainants and that children can experience the court process as extremely traumatising. This can be exacerbated if children are complainants in child sexual offence matters and if they have to give evidence against a family member. This paper has three primary aims. First, it outlines the major factors that contribute to making court processes harrowing for child complainants. Second, it outlines some of the main initiatives that have been introduced to address these factors. Finally, it weighs up the evidence about initiatives designed to assist child complainants and concludes that such initiatives have had only limited practical impact for child complainants in the criminal justice system. The limited impact is attributed to the need to balance the rights of the accused with consideration for the complainant, a failure to translate legislative changes into practice, the impact of judicial discretion and/or a focus on protecting child complainants at the expense of increasing convictions.

Indexing and efficient instance-based retrieval of process models using untanglings

Process-Aware Information Systems (PAISs) support executions of operational processes that involve people, resources, and software applications on the basis of process models. Process models describe vast, often infinite, amounts of process instances, i.e., workflows supported by the systems. With the increasing adoption of PAISs, large process model repositories emerged in companies and public organizations. These repositories constitute significant information resources. Accurate and efficient retrieval of process models and/or process instances from such repositories is interesting for multiple reasons, e.g., searching for similar models/instances, filtering, reuse, standardization, process compliance checking, verification of formal properties, etc. This paper proposes a technique for indexing process models that relies on their alternative representations, called untanglings. We show the use of untanglings for retrieval of process models based on process instances that they specify via a solution to the total executability problem. Experiments with industrial process models testify that the proposed retrieval approach is up to three orders of magnitude faster than the state of the art.

A theory of process modelling impact

Process modelling – the design and use of graphical documentations of an organisation’s business processes – is a key method to document and use information about business processes. Still, despite current interest in process modelling, this research area faces essential challenges. Key unanswered questions concern the impact of process modelling in organisational practice, and the mechanisms through which impacts are developed. To answer these questions and to provide a better understanding of process modelling impact, I turn to the concept of affordances. Affordances describe the possibilities for goal-oriented action that technical objects offer to specified users. This notion has received growing attention from IS researchers. I report on my efforts to further develop the IS discipline’s understanding of affordances and impacts from informational objects, such as process models used by analysts for purposes of information systems analysis and design. Specifically, I seek to extend existing theory on the emergence and actualisation of affordances. I develop a research model that describes the process by which affordances are perceived and actualised and explain their dependence on available information and actualisation effort. I present my plans for operationalising and testing this research model empirically, and provide details about my design of a full-cycle, mixed methods study currently in progress.

Does Venture Opportunity Variation Matter? Investigating Systematic Process Differences Between Innovative and Imitative New Ventures

The central thesis in the article is that the venture creation process is different for innovative versus imitative ventures. This holds up; the pace of the process differs by type of venture as do, in line with theory-based hypotheses, the effects of certain human capital (HC) and social capital (SC) predictors. Importantly, and somewhat unexpectedly, the theoretically derived models using HC, SC, and certain controls are relatively successful explaining progress in the creation process for the minority of innovative ventures, but achieve very limited success for the imitative majority. This may be due to a rationalistic bias in conventional theorizing and suggests that there is need for considerable theoretical development regarding the important phenomenon of new venture creation processes. Another important result is that the building up of instrumental social capital, which we assess comprehensively and as a time variant construct, is important for making progress with both types of ventures, and increasingly, so as the process progresses. This result corroborates with stronger operationalization and more appropriate analysis method what previously published research has only been able to hint at.

Rethinking sustainable urban development: Towards an integrated planning and development process

A city is the most dramatic manifestation of human activities on the environment. This human dominated organism degrades natural habitats, simplifies species composition, disrupts hydrological systems, and modifies energy flow and nutrient cycling. Sustainable urban development is seen as a panacea to minimise these externalities caused by widespread human activities on the environment. The concept of sustainable urban development has been around over a considerably long-time as the need to adopt environmentally sustainable behaviours made the international community commit to it. However, to date such development has not been achieved in large scales anywhere around the globe. This review paper aims to look at the sustainable urban development concept from the lens of planning and development integration to generate new insights and directions. The paper reports the outcome of the review of the literature on planning and development approaches—i.e., urban planning, ecological planning, urban development, sustainable urban development—and proposes a new process to support the efforts for achieving sustainable urban development—i.e., integrated urban planning and development process. The findings of this review paper highlights that adopting such holistic planning and development process generate a potential to further support the progress towards achieving sustainability agendas of our cities.

A critical analysis of business process management education and alignment with industry demand : an Australian perspective

Business Process Management (BPM) is accepted globally as an organizational approach to enhance productivity and drive cost efficiencies. Studies confirm a shortage of BPM skilled professionals with limited opportunities to develop the required BPM expertise. This study investigates this gap starting from a critical analysis of BPM courses offered by Australian universities and training institutions. These courses were analyzed and mapped against a leading BPM capability framework to determine how well current BPM education and training offerings in Australia address the core capabilities required by BPM professionals globally. To determine the BPM skill-sets sought by industry, online recruitment advertisements were collated, analyzed, and mapped against this BPM capability framework. The outcomes provide a detailed overview on the alignment of available BPM education/training and industry demand. These insights are useful for BPM professionals and their employers to build awareness of the BPM capabilities required for a BPM mature organization. Universities and other training institutions will benefit from these results by understanding where demand is, where the gaps are, and what other BPM education providers are supplying. This structured comparison method could continue to provide a common ground for future discussion across university-industry boundaries and continuous alignment of their respective practices.

Application of lean production to reducing operational waste in a tile manufacturing process

Roofing tile manufacturing is a mass production process with high operational and inventory wastes and costs. Due to huge operational costs, excessive inventory and wastes, and quality problems, roofing tile manufacturers are trying to implement lean manufacturing practice in their operations in order to remain competitive in an ncreasingly competitive global market. The aim of this research is to evaluate the possibility of reducing the operational and inventory costs of the tile manufacturing process through waste minimization. This paper analyses the current waste situation in a tile manufacturing process and develops current and future value stream mapping for such a process with a view to implementing lean principles in manufacturing. The focus of the approach is on cost reduction by eliminating non-value-added activities.

Re-visioning the Queensland Youth Sector : principles to inform the Queensland Government's youth strategy and review process

This discussion paper has been provided to assist the Department of Communities, Child Safety and Disability Services (DOCCSDS) in developing the Queensland Government’s Youth Strategy and inform the review of state government funded youth services. The paper lists a number of key concepts and social determinants which need to be considered in this undertaking. Additionally, it proposes a number key concepts and principles pertinent to understanding and working with young people, and for quality youth service provision.

Process model comprehension : the effects of cognitive abilities, learning style, and strategy

Process models are used to convey semantics about business operations that are to be supported by an information system. A wide variety of professionals is targeted to use such models, including people who have little modeling or domain expertise. We identify important user characteristics that influence the comprehension of process models. Through a free simulation experiment, we provide evidence that selected cognitive abilities, learning style, and learning strategy influence the development of process model comprehension. These insights draw attention to the importance of research that views process model comprehension as an emergent learning process rather than as an attribute of the models as objects. Based on our findings, we identify a set of organizational intervention strategies that can lead to more successful process modeling workshops.

Process mining for clinical processes: A comparative analysis of four Australian hospitals

Business process analysis and process mining, particularly within the health care domain, remain under-utilised. Applied research that employs such techniques to routinely collected, health care data enables stakeholders to empirically investigate care as it is delivered by different health providers. However, cross-organisational mining and the comparative analysis of processes present a set of unique challenges in terms of ensuring population and activity comparability, visualising the mined models and interpreting the results. Without addressing these issues, health providers will find it difficult to use process mining insights, and the potential benefits of evidence-based process improvement within health will remain unrealised. In this paper, we present a brief introduction on the nature of health care processes; a review of the process mining in health literature; and a case study conducted to explore and learn how health care data, and cross-organisational comparisons with process mining techniques may be approached. The case study applies process mining techniques to administrative and clinical data for patients who present with chest pain symptoms at one of four public hospitals in South Australia. We demonstrate an approach that provides detailed insights into clinical (quality of patient health) and fiscal (hospital budget) pressures in health care practice. We conclude by discussing the key lessons learned from our experience in conducting business process analysis and process mining based on the data from four different hospitals.