Contribution of industry-based student learning performance for the STEM education

We hypothesized that Industry based learning and teaching, especially through company assigned student projects or training programs, is an integral part of science, technology, engineering and mathematics (STEM) education. In this paper we show that industry-based student training and experience increases students’ academic performances independent to the organizational parameters and contexts. The literature on industry-based student training focuses on employability and the industry dimension, and neglects in many ways the academic dimension. We observed that the association factors between academic attributes and contributions of industry-based student training are central and vital to the technological learning experiences. We explore international initiatives and statistics collected of student projects in two categories: Industry based learning performances and on campus performances. The data collected were correlated to five (5) universities in different industrialized countries, e.g., Australia N=545 projects, Norway N=279, Germany N=74, France N=107 and Spain N=802. We analyzed industry-based student training along with company assigned student projects compared with in comparisons to campus performance. The data that suggests a strong correlation between industry-based student training per se and improved performance profiles or increasing motivation shows that industry-based student training increases student academic performance independent of organizational parameters and contexts. The programs we augmented were orthogonal to each other however, the trend of the students’ academic performances are identical. An isolated cohort for the reported countries that opposed our hypothesis warrants further investigation.

An analysis of dispute review boards and settlement mediation as used in the Australian construction industry

If there is a silver lining to the adversarial, dispute-prone nature of the building and construction industry, it can be found in the concomitant rise of innovative dispute resolution mechanisms. Time, cost and relationship concerns have meant that the formal adversarial system holds little appeal for disputing parties. As these alternative forms of dispute avoidance/resolution have matured in Australia over the last 20 years, attention has turned to the key characteristics of each process and their suitability to the building and construction industry. This article considers the role of dispute review boards (DRBs) and mediation as two alternative methods for avoiding/resolving disputes in the construction industry. Criteria are established for evaluating the efficacy of these procedures and their sensitivity to the needs of construction industry disputants. The ultimate conclusion reached is that DRBs represent a powerful, yet underutilised dispute resolution tool in Australia, and possess many industry-specific advantages that more traditional forms of alternative dispute resolution (particularly mediation) do not provide.

Embedded creatives in the Australian manufacturing industry

According to 2011 Australian Census figures, embedded creative employees (creative employees not working in the core Creative Industries) make up 2 per cent (or a total of 17 635) of manufacturing industry employees. The average for all industries is 1.6 per cent. In the 2011–2012 financial year the manufacturing industry formed 7.3 per cent of Australia’s gross domestic product (GDP), contributing approximately AU$106.5 billion to the economy (Department of Industry, Innovation, Science, Research and Tertiary Education 2013). Manufacturing is central to innovation, accounting for over one-quarter of all business expenditure in R&D in 2010–2011, representing around AU$4.8 billion invested in R&D (ibid.). Facing challenges such as sustainability concerns, ever-increasing offshore production and the global financial crisis, the Australian manufacturing industry needs to remain relevant and competitive to succeed. Innovation is one way to do this. Given the contribution of the manufacturing industry to the Australian economy, and the above-average portion of embedded creatives in manufacturing, it is important to consider what exactly embedded creatives add to the industry. This chapter, inspired by the Getting Creative in Healthcare report (Pagan, Higgs and Cunningham 2008), examines the contribution of embedded creatives to innovation in the manufacturing industry via case studies and supplemental data.

Safety culture and the australian heavy vehicle industry : a concept in chaos : an industry in need

This research proposed a new framework for safety culture and examined the influence that culture has on safety in the heavy vehicle industry. The results gave evidence for an industry wide culture, allowing future safety interventions to be designed in a culturally-relevant manner. Designing culturally-relevant interventions may maximise their effectiveness and reduce the levels of resistance to safety that have been evident in past years.

Exploring the factor structure of a new self- and other-oriented alcohol expectancy scale relating to sexual coercion and vulnerability

Introduction and Aim: Sexual assaults commonly involve alcohol use by the perpetrator, victim, or both. Beliefs about alcohol’s effects may impact on people’s perceptions of and responses to men and women who have had such experiences while intoxicated from alcohol. This study aimed to develop an alcohol expectancy scale that captures young adults’ beliefs about alcohol’s role in sexual aggression and victimisation. Design and Methods: Based on pilot focus groups, an initial pool of 135 alcohol expectancy items was developed, checked for readability and face validity, and administered via a cross-sectional survey to 201 male and female university students (18-25 years). Items were specified in terms of three target drinkers: self, men, and women. In addition, a social desirability measure was included. Results: Principal Axis Factoring revealed a 4-factor solution for the targets men and women and a 5-factor solution for the target self with 72 items retained. Factors related to sexual coercion, sexual vulnerability, confidence, self-centredness, and negative cognitive and behavioural effects. Social desirability issues were evident for the target self, but not for the targets men and women. Discussion and Conclusions: Young adults link alcohol’s effects with sexual vulnerabilities via perceived risky cognitions and behaviours. Due to social desirability, these expectancies may be difficult to explicate for the self but may be accessible instead via other-oriented assessment. The Sexual Coercion and Vulnerability Alcohol Expectancy Scale has potential as a tool to elucidate the established tendency for observers to excuse intoxicated sexual perpetrators while blaming intoxicated victims.

Study Protocol - Alcohol Management Plans (AMPs) in remote indigenous communities in Queensland: their impacts on injury, violence, health and social indicators and their cost-effectiveness

Background In 2002/03 the Queensland Government responded to high rates of alcohol-related harm in discrete Indigenous communities by implementing alcohol management plans (AMPs), designed to include supply and harm reduction and treatment measures. Tighter alcohol supply and carriage restrictions followed in 2008 following indications of reductions in violence and injury. Despite the plans being in place for over a decade, no comprehensive independent review has assessed to what level the designed aims were achieved and what effect the plans have had on Indigenous community residents and service providers. This study will describe the long-term impacts on important health, economic and social outcomes of Queensland’s AMPs. Methods/Design The project has two main studies, 1) outcome evaluation using de-identified epidemiological data on injury, violence and other health and social indicators for across Queensland, including de-identified databases compiled from relevant routinely-available administrative data sets, and 2) a process evaluation to map the nature, timing and content of intervention components targeting alcohol. Process evaluation will also be used to assess the fidelity with which the designed intervention components have been implemented, their uptake and community responses to them and their perceived impacts on alcohol supply and consumption, injury, violence and community health. Interviews and focus groups with Indigenous residents and service providers will be used. The study will be conducted in all 24 of Queensland’s Indigenous communities affected by alcohol management plans. Discussion This evaluation will report on the impacts of the original aims for AMPs, what impact they have had on Indigenous residents and service providers. A central outcome will be the establishment of relevant databases describing the parameters of the changes seen. This will permit comprehensive and rigorous surveillance systems to be put in place and provided to communities empowering them with the best credible evidence to judge future policy and program requirements for themselves. The project will inform impending alcohol policy and program adjustments in Queensland and other Australian jurisdictions. The project has been approved by the James Cook University Human Research Ethics Committee (approval number H4967 & H5241).

Dino De Laurentiis and Australia: Creating a film industry on the Gold Coast

When Dino De Laurentiis died in October 2010, most media outlets, including Australian based publications and services reported the news and most newspapers carried obituaries. Obituarists described Dino’s many failures in great detail; as film historian David Thomson wrote in The Guardian ‘there were enough bombs from Dino to level a large city’ (Thomson 2010). But Dino was also responsible in no small way for the building of new media cities in Rome, in North Carolina, and in Queensland. In this article, we draw on some of our research for that book to outline in more detail the importance of Dino De Laurentiis’s involvement to the Gold Coast studios and to film and television production in Queensland.

A survey in mathematics for industry: Two-timing and matched asymptotic expansions for singular perturbation problems

Following the derivation of amplitude equations through a new two-time-scale method [O'Malley, R. E., Jr. & Kirkinis, E (2010) A combined renormalization group-multiple scale method for singularly perturbed problems. Stud. Appl. Math. 124, 383-410], we show that a multi-scale method may often be preferable for solving singularly perturbed problems than the method of matched asymptotic expansions. We illustrate this approach with 10 singularly perturbed ordinary and partial differential equations. © 2011 Cambridge University Press.

An exploration of the extent, use and success in the application of Building Information Modelling (BIM) in the UK construction industry

Building Information Modelling (BIM) has been regarded as a one stop shop capable of addressing the ills of the construction industry. Yet, while some firms have accepted BIM as a new way to work and gone on to record success, others (which have not so done) have raised such questions as: ‘How is BIM defined? Is it a tool or a process? Which kinds and sizes of organisations stand to benefit from BIM?’ These questions form the basis of this research. Hence, having explored the relevant body of literature, this research investigates three organisations within the UK – described as the earliest adopters of BIM – and considers how they have fared in terms of project performance in the years since adopting BIM; focusing on project cost, delivery time and quality achievement. This investigation also probed two of the leading voices in BIM in the UK in search of the much needed answers. The findings of the research show that successful projects executed in the organisations that have used BIM is predicated on its adoption as a process, rather than as a tool of technology; a process that changes the way work in the construction industry is typically done. Moreover, the successes recorded in the firms researched give credence to project success consequent upon adopting BIM. Nevertheless, the findings of this research show that the cornerstone of this success is leadership-driven innovation.

The alcohol culture of mature-aged women : similarities and differences across borders

Introduction: Relatively few attempts have been made to describe and understand women’s alcohol consumption beyond adolescence and young adulthood. In particular, there has been a lack of studies focusing on the alcohol culture that surrounds and guides mature-aged women’s drinking. As part of a larger cross-national comparison, the present study sought to address this gap by identifying the shared beliefs and values that impact on drinking outcomes among mature-aged women in Sweden and Australia. Method: The study was guided by an ethnographic methodology. To generate data, a series of semi-structured interview were conducted with 17 Australian (age = 45-57 years; M = 52.1, SD = 3.9) and 19 Swedish (age = 45-58 years; M = 52.2, SD = 4.8) women. All interviews were transcribed verbatim and thematically analysed. Results: With age, the focus of alcohol as a single purpose vehicle for intoxication had given way to a focus on the enjoyment and ritual of drinking itself; taste had become increasingly important and alcohol was strongly associated with pleasurable environments and experiences. The view of alcohol as a taste experience was particularly pronounced among the Swedish women, with alcohol (most commonly wine) often seen as inseparable from food. Among the Swedish women, this view of alcohol was also associated with a strong de-emphasis of the pharmacological effects of alcohol. In contrast, several Australian women understood and used alcohol as relief for anxiety and stress. Moderate drinking was linked to the social construction of both age and gender in the two samples, while heavy or abusive alcohol consumption was associated with strong proscriptive norms and stigma. Conclusions: Australian and Swedish women share a number of beliefs and values around alcohol, however, these findings also show unique country-level differences. Implications for drinking outcomes are discussed.

The Queensland Indigenous alcohol diversion program : a health agency’s journey

Drug and alcohol diversion programs provide offenders with the opportunity to divert from the criminal justice or child safety systems, and enter into treatment to address their illicit drug or alcohol use. However, low participation by Indigenous Australians in diversion programs has been recognised as an issue, with Indigenous Australians being much less likely to be diverted into treatment (NIDAC 2009: 9). QIADP represents a unique opportunity to improve Indigenous access to diversion programs. QIADP is an Indigenous-specific alcohol diversion program in its final, third year as a pilot, with the evaluation due December 2009. Many lessons have been learnt by Queensland Health as to what works and doesn’t work in the provision of alcohol-related treatment with this population, including how partnerships with other governmental departments and NGOs can enhance the quality of treatment and ways to build clinical cultural competence in the workforce and programmatic system. This presentation shares the practical lessons QH has learnt in delivering alcohol treatment within an Indigenous-specific diversion program. This includes solutions that others may find useful for application elsewhere, such as the holistic range of treatment options found helpful, and the relationship issues to work through to support a partnership response.

Evaluating the competitiveness of the tourism industry in Cambodia : self-assessment from professionals

The annual tourism growth rate in Cambodia is among the highest in the world; however, tourist industry impact on Cambodian's economy is quite low. The purpose of our study is to analyse the strengths and weaknesses of the Cambodian tourism market so that a framework can be established to help the country's policy-makers formulate strategies to use its resources effectively to create sustainable tourism competitiveness. This study used the perspective of tourism experts in the industry and Ministry of Tourism in Cambodia, and academia in the tourism field to evaluate Cambodian tourism competitiveness relative to its major competitors in ASEAN (Association of Southeast Asian Nations) based on nine categories: endowed resources, created resources, supporting factors, destination management, situational conditions, demand condition, technology, openness and market performance indicators benchmarked from previous research. The results showed that Cambodia has a lot of endowed resources, but lacks supporting resources and factors to achieve tourism competitiveness.

Innovation in the Australian Spatial Information Industry

Business literature reveals the importance of generating innovative products and services, but much of the innovation research has been conducted in large firms and not replicated in small firms. These firms are likely to have different perspectives on innovation, which means that they will probably behave differently to large firms. Our study aims to unpack how firms in Spatial Information perceive and engage in innovation as a part of their business operation. To investigate these questions we conduct 20 in depth interviews of top management team members in Spatial Information firms in Australia. We find that small firms define innovation very broadly and measure innovation by its effect on productivity or market success. Innovation is seen as crucial to survival and success in a competitive environment. Most firms engage in product and/or service innovations, while some also mentioned marketing, process and organisational innovations. Most innovations were more exploitative rather than exploratory with only a few being radical innovations. Innovation barriers include time and money constraints, corporate culture and Government tendering practices. Our study sheds a light on our understanding of innovation in an under-researched sector; that is spatial information industry.

Industry in Jarrow

This study was done during 1958-59 as part of a geography major at London Institute of Education, Eastbourne Teachers' Training College, Sussex 1957-59. (Age 19) I visited all factories, industries and wharfs on my bicycle and interviewed managers, owners and supervisors.

Review and future options for computer modelling in the sugar industry

Computer modelling has been used extensively in some processes in the sugar industry to achieve significant gains. This paper reviews the investigations carried out over approximately the last twenty five years,including the successes but also areas where problems and delays have been encountered. In that time the capability of both hardware and software have increased dramatically. For some processes such as cane cleaning, cane billet preparation, and sugar drying, the application of computer modelling towards improved equipment design and operation has been quite limited. A particular problem has been the large number of particles and particle interactions in these applications, which, if modelled individually, is computationally very intensive. Despite the problems, some attempts have already been made and knowledge gained on tackling these issues. Even if the detailed modelling is wanting, a model can provide some useful insights into the processes. Some options to attack these more intensive problems include the use of commercial software packages, which are usually very robust and allow the addition of user-supplied subroutines to adapt the software to particular problems. Suppliers of such software usually charge a fee per CPU licence, which is often problematic for large problems that require the use of many CPUs. Another option to consider is using open source software that has been developed with the capability to access large parallel resources. Such software has the added advantage of access to the full internal coding. This paper identifies and discusses the detail of software options with the potential capability to achieve improvements in the sugar industry.