Human papillomavirus prevalence, viral load and pre-cancerous lesions of the cervix in women initiating highly active antiretroviral therapy in South Africa : a cross-sectional study

Background Cervical cancer and infection with human immunodeficiency virus (HIV) are both important public health problems in South Africa (SA). The aim of this study was to determine the prevalence of cervical squamous intraepithelial lesions (SILs), high-risk human papillomavirus (HR-HPV), HPV viral load and HPV genotypes in HIV positive women initiating anti-retroviral (ARV) therapy. Methods A cross-sectional survey was conducted at an anti-retroviral (ARV) treatment clinic in Cape Town, SA in 2007. Cervical specimens were taken for cytological analysis and HPV testing. The Digene Hybrid Capture 2 (HC2) test was used to detect HR-HPV. Relative light units (RLU) were used as a measure of HPV viral load. HPV types were determined using the Roche Linear Array HPV Genotyping test. Crude associations with abnormal cytology were tested and multiple logistic regression was used to determine independent risk factors for abnormal cytology. Results The median age of the 109 participants was 31 years, the median CD4 count was 125/mm3, 66.3% had an abnormal Pap smear, the HR-HPV prevalence was 78.9% (Digene), the median HPV viral load was 181.1 RLU (HC2 positive samples only) and 78.4% had multiple genotypes. Among women with abnormal smears the most prevalent HR-HPV types were HPV types 16, 58 and 51, all with a prevalence of 28.5%. On univariate analysis HR-HPV, multiple HPV types and HPV viral load were significantly associated with the presence of low and high-grade SILs (LSIL/HSIL). The multivariate logistic regression showed that HPV viral load was associated with an increased odds of LSIL/HSIL, odds ratio of 10.7 (95% CI 2.0 – 57.7) for those that were HC2 positive and had a viral load of ≤ 181.1 RLU (the median HPV viral load), and 33.8 (95% CI 6.4 – 178.9) for those that were HC2 positive with a HPV viral load > 181.1 RLU. Conclusion Women initiating ARVs have a high prevalence of abnormal Pap smears and HR-HPV. Our results underscore the need for locally relevant, rigorous screening protocols for the increasing numbers of women accessing ARV therapy so that the benefits of ARVs are not partially offset by an excess risk in cervical cancer.

Increasing physical activity among women with young children: Results from the Proactive Mums Project

Context Evidence from the Australian Longitudinal Study of Women's Health suggests that mothers of young children have lower levels of physical activity (PA) than women of similar age without children. Objectives The aim of the ProActive Mums project was to determine the relative efficacy of two strategies designed to increase the proportion of mothers of young children who are meeting current PA guidelines, utilising child care centres (CCCs) as the setting for recruitment. Study Design The project used a randomised (after stratification to ensure even representation of CCCs from differing socio-economic areas) design incorporating repeated data collection from women in three groups, each consisting of 7 childcare centres (CCCs). Baseline surveys were completed by 554 mothers, with follow-up data collection immediately post-Intervention (8 weeks after baseline) and again 5 months later. Women from CCCs in Group 1 (control) received only the surveys throughout the duration of the project. Women from CCCs in Group 2 (information only) were given a print intervention, and women from CCCs in Group 3 were (in addition to being given the same print intervention as women from CCCs in Group 2) invited to to contribute to the development of, and participate in, strategies for the promotion of PA among mothers of young children. The two intervention strategies were extensively evaluated through a series of surveys and interviews. The Intervention The print intervention prescribed for women from CCCs in Group 2 and Group 3 consisted of an 8-page booklet containing motivational messages and information about physical activity. Women from CCCs in Group 3 were also invited to attend meetings at their CCC to identify strategies for increasing their PA. Contacts were made with key stakeholders in the community, including managers of sporting and recreation facilities, childcare service providers, and local councils. A wide range of strategies was developed during the intervention phase of the project, which specifically focused on the need to increase partner support and self-efficacy (or the confidence to be physically active). Results The mean age of participants was 33 (+ 4.8) years, and the mean number of children per family unit was 2.2 (± 0.9). At baseline, fewer than half the women were meeting current guidelines for adequate PA for health benefit, and there were no significant differences between groups in the proportion of women who were adequately active for health benefit. Women in Group 3 were significantly more likely to meet the guidelines at post-intervention follow-up than controls [OR = 1.71 (1.05-2.77)] after controlling for age and PA at baseline. There was no significant effect of the print intervention alone on meeting guidelines at post-intervention follow-up compared with controls, after controlling for age and PA at baseline [OR = 1.15 (0.70-1.89)]. Changes in Partner Support (PS) and Self Efficacy (SE) significantly predicted meeting current PA guidelines at post-intervention follow-up after controlling for baseline PA [∆ PS: OR = 2.29 (1.46-3.58); ∆ SE: OR = 1.86 (1.17- 2.94)]. The intervention effect in Group 3 was not maintained at long-term follow-up. Conclusions The findings indicate that a community participation approach that facilitates increased partner support and self-efficacy can be effective in increasing PA among mothers of young children. Changes in physical activity were found to be mediated by changes in partner support and self-efficacy for physical activity, suggesting that the intervention successfully targeted the individual characteristics it intended to, and that these variables do play an important role in increasing physical activity among women with young children. It is clear that further work needs to be done to explore methods of translating the short-term intervention effect shown in this study into long-term changes in PA behaviour. This study also provided insight into measurement issues in PA research and raised questions about self-report measures of PA and perceived constraints to being physically active. The results from post-study qualitative interviews suggest that many women at this life-stage experience time constraints which, when accompanied by a lack of partner support and financial constraints, make leisure-time PA virtually impossible for many women. Future strategies might focus on targeting this population immediately prior to this life-stage in an attempt to encourage habitual physical activity before women have children. Increasing PA in this population should also address the entire family unit, and consider the way leisure-time is negotiated among the adults within a household. Social change and increased awareness of the range of benefits of PA for women with children are additional strategies to be considered.

Relationships and sexual health promotion project for QUT international students

International students may experience a variety of sexual health problems which include unplanned pregnancies, abortions and sexually transmitted diseases. These are often because of limited knowledge of sexual health matters and lack of sexual health education and/or access to health services in their home country. A study was undertaken to identify the concerns of international students and how to provide culturally appropriate promotion of sexual health for international students at Queensland University of Technology (QUT). The project included consultations with stakeholders, interviews with key informants, an online survey and focus group discussions with international students. The project found that sexual health is a concern for international students, particularly in developing relationships and when becoming sexually active in Australia, and there is a perceived lack of access to health services and insufficient knowledge on sexual health matters. Preferred methods of dissemination of sexual health information included use of student mentors, web-based online resources, brochures and confidential on-line advice.

Is it time to revisit the problem young driver?

For decades there have been two young driver concepts: the „young driver problem‟ where the driver cohort represents a key problem for road safety; and the „problem young driver‟ where a sub-sample of drivers represents the greatest road safety problem. Given difficulties associated with identifying and then modifying the behaviour of the latter group, broad countermeasures such as graduated driver licensing (GDL) have generally been relied upon to address the young driver problem. GDL evaluations reveal general road safety benefits for young drivers, yet they continue to be overrepresented in fatality and injury statistics. Therefore it is timely for researchers revisit the problem young driver concept to assess its potential countermeasure implications. Personal characteristics, behaviours and attitudes of 378 Queensland novice drivers aged 17-25 years were explored during their pre-, Learner and Provisional 1 (intermediate) licence as part of a larger longitudinal research project. Self-reported risky driving was measured by the Behaviour of Young Novice Drivers Scale (BYNDS), and five subscale scores were used to cluster the drivers into three groups (high risk n = 49, medium risk n = 163, low risk n = 166). High risk „problem young‟ drivers were characterised by self-reported pre-Licence driving, unsupervised Learner driving, and speeding, driving errors, risky driving exposure, crash involvement, and offence detection during the Provisional period. Medium risk drivers were also characterised by more risky road use behaviours than the low risk group. Interestingly problem young drivers appear to have some insight into their high-risk driving, and they report significantly greater intentions to bend road rules in future driving. The results suggest that in addition to broad countermeasures such as GDL which target the young driver problem, tailored intervention efforts may need to target problem young drivers. Driving behaviours and crash-involvement could be used to identify these drivers as pre-intervention screening measures.

Ionic liquid pre-treatment and fractionation of sugarcane bagasse for the production of bioethanol

Pretretament is an essential and expensive processing step for the manufacturing of ethanol from lignocellulosic raw materials. Ionic liquids are a new class of solvents that have the potential to be used as pretreatment agents. The attractive characteristics of ionic liquid pretreatment of lignocellulosics such as thermal stability, dissolution properties, fractionation potential, cellulose decrystallisation capacity and saccharification impact are investigated in this thesis. Dissolution of bagasse with 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) at high temperatures (110 �‹C to 160 �‹C) is investigated as a pretreatment process. Material balances are reported and used along with enzymatic saccharification data to identify optimum pretreatment conditions (150 �‹C for 90 min). At these conditions, the dissolved and reprecipitated material is enriched in cellulose, has a low crystallinity and the cellulose component is efficiently hydrolysed (93 %, 3 h, 15 FPU). At pretreatment temperatures < 150 �‹C, the undissolved material has only slightly lower crystallinity than the starting. At pretreatment temperatures . 150 �‹C, the undissolved material has low crystallinity and when combined with the dissolved material has a saccharification rate and extent similar to completely dissolved material (100 %, 3h, 15 FPU). Complete dissolution is not necessary to maximize saccharification efficiency at temperatures . 150 �‹C. Fermentation of [C4mim]Cl-pretreated, enzyme-saccharified bagasse to ethanol is successfully conducted (85 % molar glucose-to-ethanol conversion efficiency). As compared to standard dilute acid pretreatment, the optimised [C4mim]Cl pretreatment achieves substantially higher ethanol yields (79 % cf. 52 %) in less than half the processing time (pretreatment, saccharification, fermentation). Fractionation of bagasse partially dissolved in [C4mim]Cl to a polysaccharide rich and a lignin rich fraction is attempted using aqueous biphasic systems (ABSs) and single phase systems with preferential precipitation. ABSs of ILs and concentrated aqueous inorganic salt solutions are achievable (e.g. [C4mim]Cl with 200 g L-1 NaOH), albeit they exhibit a number of technical problems including phase convergence (which increases with increasing biomass loading) and deprotonation of imidazolium ILs (5 % - 8 % mol). Single phase fractionation systems comprising lignin solvents / cellulose antisolvents, viz. NaOH (2M) and acetone in water (1:1, volume basis), afford solids with, respectively, 40 % mass and 29 % mass less lignin than water precipitated solids. However, this delignification imparts little increase in saccharification rates and extents of these solids. An alternative single phase fractionation system is achieved simply by using water as an antisolvent. Regulating the water : IL ratio results in a solution that precipitates cellulose and maintains lignin in solution (0.5 water : IL mass ratio) in both [C4mim]Cl and 1-ethyl-3-methylimidazolium acetate ([C2mim]OAc)). This water based fractionation is applied in three IL pretreatments on bagasse ([C4mim]Cl, 1-ethyl-3-methyl imidazolium chloride ([C2mim]Cl) and [C2mim]OAc). Lignin removal of 10 %, 50 % and 60 % mass respectively is achieved although only 0.3 %, 1.5 % and 11.7 % is recoverable even after ample water addition (3.5 water : IL mass ratio) and acidification (pH . 1). In addition the recovered lignin fraction contains 70 % mass hemicelluloses. The delignified, cellulose-rich bagasse recovered from these three ILs is exposed to enzyme saccharification. The saccharification (24 h, 15 FPU) of the cellulose mass in starting bagasse, achieved by these pretreatments rank as: [C2mim]OAc (83 %)>>[C2mim]Cl (53 %)=[C4mim]Cl(53%). Mass balance determinations accounted for 97 % of starting bagasse mass for the [C4mim]Cl pretreatment , 81 % for [C2mim]Cl and 79 %for [C2mim]OAc. For all three IL treatments, the remaining bagasse mass (not accounted for by mass balance determinations) is mainly (more than half) lignin that is not recoverable from the liquid fraction. After pretreatment, 100 % mass of both ions of all three ILs were recovered in the liquid fraction. Compositional characteristics of [C2mim]OAc treated solids such as low lignin, low acetyl group content and preservation of arabinosyl groups are opposite to those of chloride IL treated solids. The former biomass characteristics resemble those imparted by aqueous alkali pretreatment while the latter resemble those of aqueous acid pretreatments. The 100 % mass recovery of cellulose in [C2mim]OAc as opposed to 53 % mass recovery in [C2mim]Cl further demonstrates this since the cellulose glycosidic bonds are protected under alkali conditions. The alkyl chain length decrease in the imidazolium cation of these ILs imparts higher rates of dissolution and losses, and increases the severity of the treatment without changing the chemistry involved.

Islamic project financing implementation for sustainable infrastructure development in Indonesia

Islamic financing in Indonesia infrastructure projects development has not been optimally implemented. Therefore this paper serves as a catalyst to explore alternative financial scheme such as Islamic financing for infrastructure development. The purpose of this paper is to explore the enablers and barriers in implementing Islamic project financing for public infrastructure development. The findings are then culminated into enablers and barriers in the implementation of Islamic project financing. The two main enablers are the readily availability of huge fund that can be used to support infrastructure projects; and the acceptability of the concept of shariah-compliant financing. On the other hand, the barriers include: high cost of funding; lack of financial institution capability; lack of government policy and regulation; insufficient government support and commitment; conflict between infrastructure and Islamic finance business practices; profit oriented mindset; lack of understanding of Islamic project financing knowledge in infrastructure; and insufficient project preparation.

Examining preservice teachers’ applied learning experiences in the Teacher Education Done Differently (TEDD) project

Reviews have criticised universities for not embedding sufficient praxis for preparing preservice teachers for the profession. The Teacher Education Done Differently (TEDD) project explored praxis development for preservice teachers within existing university coursework. This mixed-method investigation involved an analysis of multiple case studies with preservice teacher involvement in university programs, namely: Ed Start for practicum I (n=26), III (n=23), and IV (n=12); Move It Use It (Health and Physical Education program; n=38), Studies of Society and its Environment (SOSE, n=24), and Science in Schools (n=38). The project included preservice teachers teaching primary students at the campus site in gifted education (the B-GR8 program, n=22). The percentage range for preservice teacher agreement of their praxis development leading up to practicum I, III, and IV was between 91-100% with a high mean score range (4.26-5.00). Other university units had similar findings except for SOSE (i.e., percentage range: 10-86%; M range: 2.33-4.00; SD range: 0.55-1.32). Qualitative data presented an understanding of the praxis development leading to the conclusion that additional applied learning experiences as lead-up days for field experiences and as avenues for exploring the teaching of specific subject areas presented opportunities for enhancing praxis.

Duration-dependant response of mixed-method pre-cooling for intermittent-sprint exercise in the heat

This study examined the effects of pre-cooling duration on performance and neuromuscular function for self-paced intermittent-sprint shuttle running in the heat. Eight male, team-sport athletes completed two 35-min bouts of intermittent-sprint shuttle running separated by a 15-min recovery on three separate occasions (33°C, 34% relative humidity). Mixed-method pre-cooling was completed for 20 min (COOL20), 10-min (COOL10) or no cooling (CONT) and reapplied for 5-min mid-exercise. Performance was assessed via sprint times, percentage decline and shuttle-running distance covered. Maximal voluntary contractions (MVC), voluntary activation (VA) and evoked twitch properties were recorded pre- and post-intervention and mid- and post-exercise. Core temperature (T c), skin temperature, heart rate, capillary blood metabolites, sweat losses, perceptual exertion and thermal stress were monitored throughout. Venous blood draws pre- and post-exercise were analyzed for muscle damage and inflammation markers. Shuttle-running distances covered were increased 5.2 ± 3.3% following COOL20 (P < 0.05), with no differences observed between COOL10 and CONT (P > 0.05). COOL20 aided in the maintenance of mid- and post-exercise MVC (P < 0.05; d > 0.80), despite no conditional differences in VA (P > 0.05). Pre-exercise T c was reduced by 0.15 ± 0.13°C with COOL20 (P < 0.05; d > 1.10), and remained lower throughout both COOL20 and COOL10 compared to CONT (P < 0.05; d > 0.80). Pre-cooling reduced sweat losses by 0.4 ± 0.3 kg (P < 0.02; d > 1.15), with COOL20 0.2 ± 0.4 kg less than COOL10 (P = 0.19; d = 1.01). Increased pre-cooling duration lowered physiological demands during exercise heat stress and facilitated the maintenance of self-paced intermittent-sprint performance in the heat. Importantly, the dose-response interaction of pre-cooling and sustained neuromuscular responses may explain the improved exercise performance in hot conditions.

Mixed-method pre-cooling reduces physiological demand without improving performance of medium-fast bowling in the heat

This study examined physiological and performance effects of pre-cooling on medium-fast bowling in the heat. Ten, medium-fast bowlers completed two randomised trials involving either cooling (mixed-methods) or control (no cooling) interventions before a 6-over bowling spell in 31.9±2.1°C and 63.5±9.3% relative humidity. Measures included bowling performance (ball speed, accuracy and run-up speeds), physical characteristics (global positioning system monitoring and counter-movement jump height), physiological (heart rate, core temperature, skin temperature and sweat loss), biochemical (serum concentrations of damage, stress and inflammation) and perceptual variables (perceived exertion and thermal sensation). Mean ball speed (114.5±7.1 vs. 114.1±7.2 km · h−1; P = 0.63; d = 0.09), accuracy (43.1±10.6 vs. 44.2±12.5 AU; P = 0.76; d = 0.14) and total run-up speed (19.1±4.1 vs. 19.3±3.8 km · h−1; P = 0.66; d = 0.06) did not differ between pre-cooling and control respectively; however 20-m sprint speed between overs was 5.9±7.3% greater at Over 4 after pre-cooling (P = 0.03; d = 0.75). Pre-cooling reduced skin temperature after the intervention period (P = 0.006; d = 2.28), core temperature and pre-over heart rates throughout (P = 0.01−0.04; d = 0.96−1.74) and sweat loss by 0.4±0.3 kg (P = 0.01; d = 0.34). Mean rating of perceived exertion and thermal sensation were lower during pre-cooling trials (P = 0.004−0.03; d = 0.77−3.13). Despite no observed improvement in bowling performance, pre-cooling maintained between-over sprint speeds and blunted physiological and perceptual demands to ease the thermoregulatory demands of medium-fast bowling in hot conditions.

Productivity and time use during occupational therapy and nutrition/dietetics clinical education : a cohort study

Background: Currently in the Australian higher education sector higher productivity from allied health clinical education placements are a contested issue. This paper will report results of a study that investigated output changes associated with occupational therapy and nutrition/dietetics clinical education placements in Queensland, Australia. Supervisors’ and students’ time use during placements and how this changes for supervisors compared to when students are not present in the workplace is also presented. Methodology/Principal Findings: A cohort design was used with students from four Queensland universities, and their supervisors employed by Queensland Health. There was an increasing trend in the number of occasions of service delivered when the students were present, and a statistically significant increase in the daily mean length of occasions of service delivered during the placement compared to pre-placement levels. For project-based placements that were not directly involved in patient care, supervisors’ project activity time decreased during placements, with students undertaking considerably more time in project activities. Conclusions/Significance: A novel method for estimating productivity and time use changes during clinical education programs for allied health disciplines has been applied. During clinical education placements there was a net increase in outputs, suggesting supervisors engage in longer consultations with patients for the purpose of training students, while maintaining patient numbers. Other activities are reduced. This paper is the first time these data have been shown and form a good basis for future assessments of the economic impact of student placements for allied health disciplines.

The financial services cultural orientation matrix

With saturation within domestic marketplaces and increased growth opportunities overseas, many financial service providers are investing in foreign markets. However, cultural attitudes towards money can present market entry challenges to financial service providers. The industry would therefore benefit from a strategic model that helps to align financial marketing mixes with the cultural dimensions of a foreign market. The Financial Services Cultural Orientation (FSCO) Matrix has therefore been designed, with three cultural dimensions identified which influence preference for financial products; preference for cash, aversion to debt and savings orientation. Based on a combination of these dimensions and their relative strength within a culture, eight different consumer segments for financial products are identified, and marketing strategies for each consumer segment are then proposed. Three cultural clusters from the GLOBE Project House et al. (2002) are used to highlight possible geographic markets for each of these consumer segments. In particular, this paper focuses on GLOBE’s Confucian Asia, Southern Asia and Anglo cultural clusters, as these clusters represent the most well established financial markets in the world and the fastest growing financial markets for the future. The FSCO Matrix provides the financial services industry with an innovative and practical tool for addressing cross-cultural challenges and developing successful marketing strategies for entry into foreign markets.

Catapulting into STEM education : female students’ interactions within a middle school engineering project

Despite efforts to motivate students to engage in Science, technology, engineering and mathematics (STEM) education, women are still underrepresented in these areas in the workforce and higher education. Targeting females at high school or earlier may be a key towards engaging them in STEM. In this paper we report on the research question: How do middle school females interact for learning about engineering education? This ethnographic study, part of a three-year longitudinal research project, investigated Year 8 female students’ learning about engineering concepts associated with designing, constructing, testing, and evaluating a catapult. Through a series of lead-up lessons and the four lesson catapult challenge (total of 18 x 45-minute lessons over 9 weeks), data from two girls within a focus group showed that the students needed to: (1) receive clarification on engineering terms to facilitate more fluent discourse, (2) question and debate conceptual understandings without peers being judgemental, and (3) have multiple opportunities for engaging with materials towards designing, constructing and explaining key concepts learnt. Implications for teachers undertaking STEM education are evident, including outlining expectations for clarifying STEM terms, outlining to students about interacting non-judgementally, and providing multiple opportunities for interacting within engineering education.

Contextualizing a university-school STEM education collaboration : distributed and self-activated leadership for project outcomes

Implementing educational reform requires partnerships, and university-school collaborations in the form of investigative and experimental projects can aim to determine the practicalities of reform. However, there are funded projects that do not achieve intended outcomes. In the context of a new reform initiative in education, namely, science, technology, engineering and mathematics (STEM) education, this article explores the management of a government-funded project. In a university school partnership for STEM education, how can leadership be distributed for achieving project outcomes? Participants included university personnel from different STEM areas, school teachers and school executives. Data collected included observations, interviews, resource materials, and video and photographic images. Findings indicated that leadership roles were distributed and selfactivated by project partners according to their areas of expertise and proximal activeness to the project phases, that is: (1) establishing partnerships; (2) planning and collaboration; (3) project implementation; and (4) project evaluation and further initiatives. Leadership can be intentional and unintentional within project phases, and understanding how leadership can be distributed and selfactivated more purposefully may aid in generating more expedient project outcomes.