Non-invasive assessment of tear film surface quality

The tear film plays an important role preserving the health of the ocular surface and maintaining the optimal refractive power of the cornea. Moreover dry eye syndrome is one of the most commonly reported eye health problems. This syndrome is caused by abnormalities in the properties of the tear film. Current clinical tools to assess the tear film properties have shown certain limitations. The traditional invasive methods for the assessment of tear film quality, which are used by most clinicians, have been criticized for the lack of reliability and/or repeatability. A range of non-invasive methods of tear assessment have been investigated, but also present limitations. Hence no “gold standard” test is currently available to assess the tear film integrity. Therefore, improving techniques for the assessment of the tear film quality is of clinical significance and the main motivation for the work described in this thesis. In this study the tear film surface quality (TFSQ) changes were investigated by means of high-speed videokeratoscopy (HSV). In this technique, a set of concentric rings formed in an illuminated cone or a bowl is projected on the anterior cornea and their reflection from the ocular surface imaged on a charge-coupled device (CCD). The reflection of the light is produced in the outer most layer of the cornea, the tear film. Hence, when the tear film is smooth the reflected image presents a well structure pattern. In contrast, when the tear film surface presents irregularities, the pattern also becomes irregular due to the light scatter and deviation of the reflected light. The videokeratoscope provides an estimate of the corneal topography associated with each Placido disk image. Topographical estimates, which have been used in the past to quantify tear film changes, may not always be suitable for the evaluation of all the dynamic phases of the tear film. However the Placido disk image itself, which contains the reflected pattern, may be more appropriate to assess the tear film dynamics. A set of novel routines have been purposely developed to quantify the changes of the reflected pattern and to extract a time series estimate of the TFSQ from the video recording. The routine extracts from each frame of the video recording a maximized area of analysis. In this area a metric of the TFSQ is calculated. Initially two metrics based on the Gabor filter and Gaussian gradient-based techniques, were used to quantify the consistency of the pattern’s local orientation as a metric of TFSQ. These metrics have helped to demonstrate the applicability of HSV to assess the tear film, and the influence of contact lens wear on TFSQ. The results suggest that the dynamic-area analysis method of HSV was able to distinguish and quantify the subtle, but systematic degradation of tear film surface quality in the inter-blink interval in contact lens wear. It was also able to clearly show a difference between bare eye and contact lens wearing conditions. Thus, the HSV method appears to be a useful technique for quantitatively investigating the effects of contact lens wear on the TFSQ. Subsequently a larger clinical study was conducted to perform a comparison between HSV and two other non-invasive techniques, lateral shearing interferometry (LSI) and dynamic wavefront sensing (DWS). Of these non-invasive techniques, the HSV appeared to be the most precise method for measuring TFSQ, by virtue of its lower coefficient of variation. While the LSI appears to be the most sensitive method for analyzing the tear build-up time (TBUT). The capability of each of the non-invasive methods to discriminate dry eye from normal subjects was also investigated. The receiver operating characteristic (ROC) curves were calculated to assess the ability of each method to predict dry eye syndrome. The LSI technique gave the best results under both natural blinking conditions and in suppressed blinking conditions, which was closely followed by HSV. The DWS did not perform as well as LSI or HSV. The main limitation of the HSV technique, which was identified during the former clinical study, was the lack of the sensitivity to quantify the build-up/formation phase of the tear film cycle. For that reason an extra metric based on image transformation and block processing was proposed. In this metric, the area of analysis was transformed from Cartesian to Polar coordinates, converting the concentric circles pattern into a quasi-straight lines image in which a block statistics value was extracted. This metric has shown better sensitivity under low pattern disturbance as well as has improved the performance of the ROC curves. Additionally a theoretical study, based on ray-tracing techniques and topographical models of the tear film, was proposed to fully comprehend the HSV measurement and the instrument’s potential limitations. Of special interested was the assessment of the instrument’s sensitivity under subtle topographic changes. The theoretical simulations have helped to provide some understanding on the tear film dynamics, for instance the model extracted for the build-up phase has helped to provide some insight into the dynamics during this initial phase. Finally some aspects of the mathematical modeling of TFSQ time series have been reported in this thesis. Over the years, different functions have been used to model the time series as well as to extract the key clinical parameters (i.e., timing). Unfortunately those techniques to model the tear film time series do not simultaneously consider the underlying physiological mechanism and the parameter extraction methods. A set of guidelines are proposed to meet both criteria. Special attention was given to a commonly used fit, the polynomial function, and considerations to select the appropriate model order to ensure the true derivative of the signal is accurately represented. The work described in this thesis has shown the potential of using high-speed videokeratoscopy to assess tear film surface quality. A set of novel image and signal processing techniques have been proposed to quantify different aspects of the tear film assessment, analysis and modeling. The dynamic-area HSV has shown good performance in a broad range of conditions (i.e., contact lens, normal and dry eye subjects). As a result, this technique could be a useful clinical tool to assess tear film surface quality in the future.

Information and communication technology for E-regions

Information and communication technologies (ICTs) are essential components of the knowledge economy, and have an immense complementary role in innovation, education, knowledge creation, and relations with government, civil society, and business within city regions. The ability to create, distribute, and exploit knowledge has become a major source of competitive advantage, wealth creation, and improvements in the new regional policies. Growing impact of ICTs on the economy and society, rapid application of recent scientific advances in new products and processes, shifting to more knowledge-intensive industry and services, and rising skill requirements have become crucial concepts for urban and regional competitiveness. Therefore, harnessing ICTs for knowledge-based urban development (KBUD) has a significant impact on urban and regional growth (Yigitcanlar, 2005). In this sense, e-region is a novel concept utilizing ICTs for regional development. Since the Helsinki European Council announced Turkey as a candidate for European Union (EU) membership in 1999, the candidacy has accelerated the speed of regional policy enhancements and adoption of the European regional policy standards. These enhancements and adoption include the generation of a new regional spatial division, NUTS-II statistical regions; a new legislation on the establishment of regional development agencies (RDAs); and new orientations in the field of high education, science, and technology within the framework of the EU’s Lisbon Strategy and the Bologna Process. The European standards posed an ambitious new agenda in the development and application of contemporary regional policy in Turkey (Bilen, 2005). In this sense, novel regional policies in Turkey necessarily endeavor to include information society objectives through efficient use of new technologies such as ICTs. Such a development seeks to be based on tangible assets of the region (Friedmann, 2006) as well as the best practices deriving from grounding initiatives on urban and local levels. These assets provide the foundation of an e-region that harnesses regional development in an information society context. With successful implementations, the Marmara region’s local governments in Turkey are setting the benchmark for the country in the implementation of spatial information systems and e-governance, and moving toward an e-region. Therefore, this article aims to shed light on organizational and regional realities of recent practices of ICT applications and their supply instruments based on evidence from selected local government organizations in the Marmara region. This article also exemplifies challenges and opportunities of the region in moving toward an e-region and provides a concise review of different ICT applications and strategies in a broader urban and regional context. The article is organized in three parts. The following section scrutinizes the e-region framework and the role of ICTs in regional development. Then, Marmara’s opportunities and challenges in moving toward an e-region are discussed in the context of ICT applications and their supply instruments based on public-sector projects, policies, and initiatives. Subsequently, the last section discusses conclusions and prospective research.

Wellness education : an integrated theoretical framework for fostering transformative learning

Optimum Wellness involves the development, refinement and practice of lifestyle choices which resonate with personally meaningful frames of reference. Personal transformations are the means by which our frames of reference are refined across the lifespan. It is through critical reflection, supportive relationships and meaning making of our experiences that we construct and reconstruct our life paths. When individuals are able to be what they are destined to be or reach their higher purpose, then they are able to contribute to the world in positive and meaningful ways. Transformative education facilitates the changes in perspective that enable one to contemplate and travel a path in life that leads to self-actualisation. This thesis argues for an integrated theoretical framework for optimum Wellness Education. It establishes a learner centred approach to Wellness education in the form of an integrated instructional design framework derived from both Wellness and Transformative education constructs. Students’ approaches to learning and their study strategies in a Wellness education context serve to highlight convergences in the manner in which students can experience perspective transformation. As they learn to critically reflect, pursue relationships and adapt their frames of reference to sustain their pursuit of both learning and Wellness goals, strengthening the nexus between instrumental and transformative learning is a strategically important goal for educators. The aim of this exploratory research study was to examine those facets that serve to optimise the learning experiences of students in a Wellness course. This was accomplished through three research issues: 1) What are the relationships between Wellness, approaches to learning and academic success? 2) How are students approaching learning in an undergraduate Wellness subject? Why are students approaching their learning in the ways they do? 3) What sorts of transformations are students experiencing in their Wellness? How can transformative education be formulated in the context of an undergraduate Wellness subject? Subsequent to a thorough review of the literature pertaining to Wellness education, a mixed method embedded case study design was formulated to explore the research issues. This thesis examines the interrelationships between student, content and context in a one semester university undergraduate unit (a coherent set of learning activities which is assigned a unit code and a credit point value). The experiences of a cohort of 285 undergraduate students in a Wellness course formed the unit of study and seven individual students from a total of sixteen volunteers whose profiles could be constructed from complete data sets were selected for analysis as embedded cases. The introductory level course required participants to engage in a personal project involving a behaviour modification plan for a self-selected, single dimension of Wellness. Students were given access to the Standard Edition Testwell Survey to assess and report their Wellness as a part of their personal projects. To identify relationships among the constructs of Self-Regulated Learning (SRL), Wellness and Student Approaches to Learning (SAL) a blend of quantitative and qualitative methods to collect and analyse data was formulated. Surveys were the primary instruments for acquiring quantitative data. Sources included the Wellness data from Testwell surveys, SAL data from R-SPQ surveys, SRL data from MSLQ surveys and student self-evaluation data from an end of semester survey. Students’ final grades and GPA scores were used as indicators of academic performance. The sources of qualitative data included subject documentation, structured interview transcripts and open-ended responses to survey items. Subsequent to a pilot study in which survey reliability and validity were tested in context, amendments to processes for and instruments of data collection were made. Students who adopted meaning oriented (deep/achieving) approaches tended to assess their Wellness at a higher level, seek effective learning strategies and perform better in formal study. Posttest data in the main study revealed that there were significant positive statistical relationships between academic performance and total wellness scores (rs=.297, n=205, p<.01). Deep (rs=.343, n=137, p<.01) and achieving (rs=.286, n=123, p<.01) approaches to learning also significantly correlated with Wellness whilst surface approaches had negative correlations that were not significant. SRL strategies including metacognitive selfregulation, effort, help-seeking and critical thinking were increasingly correlated with Wellness. Qualitative findings suggest that while all students adopt similar patterns of day to day activities for example attending classes, taking notes, working on assignments the level of care with which these activities is undertaken varies considerably. The dominant motivational trigger for students in this cohort was the personal relevance and associated benefits of the material being learned and practiced. Students were inclined to set goals that had a positive impact on affect and used “sense of happiness” to evaluate their achievement status. Students who had a higher drive to succeed and/or understand tended to have or seek a wider range of strategies. Their goal orientations were generally learning rather than performance based and barriers presented a challenge which could be overcome as opposed to a blockage which prevented progress. Findings from an empirical analysis of the Testwell data suggest that a single third order Wellness construct exists. A revision of the instrument is necessary in order to juxtapose it with the chosen six dimensional Wellness model that forms the foundation construct in the course. Further, redevelopment should be sensitive to the Australian context and culture including choice of language, examples and scenarios used in item construction. This study concludes with an heuristic for use in Wellness education. Guided by principles of Transformative education theory and behaviour change theory, and informed by this representative case study the “CARING” heuristic is proposed as an instructional design tool for Wellness educators seeking to foster transformative learning. Based upon this study, recommendations were made for university educators to provide authentic and personal experiences in Wellness curricula. Emphasis must focus on involving students and teachers in a partnership for implementing Wellness programs both in the curriculum and co-curricularly. The implications of this research for practice are predicated on the willingness of academics to embrace transformative learning at a personal level and a professional one. To explore students’ profiles in detail is not practical however teaching students how to guide us in supporting them through the “pain” of learning is a skill which would benefit them and optimise the learning and teaching process. At a theoretical level, this research contributes to an ecological theory of Wellness education as transformational change. By signposting the wider contexts in which learning takes place, it seeks to encourage changing paradigms to ones which harness the energy of each successive contextual layer in which students live. Future research which amplifies the qualities of individuals and groups who are “Well” and seeks the refinement and development of instruments to measure Wellness constructs would be desirable for both theoretical and applied knowledge bases. Mixed method Wellness research derived and conducted by teams that incorporate expertise from multiple disciplines such as psychology, anthropology, education, and medicine would enable creative and multi-perspective programs of investigation to be designed and implemented. Congruences and inconsistencies in health promotion and education would provide valuable material for strengthening the nexus between transformational learning and behaviour change theories. Future development of and research on the effectiveness of the CARING heuristic would be valuable in advancing the understanding of pedagogies which advance rather than impede learning as a transformative process. Exploring pedagogical models that marry with transformative education may render solutions to the vexing challenge of teaching and learning in diverse contexts.

Role demands and work-family balance experience in Malaysia : the different moderating effects of collectivism and gender role identity among diverse ethnic groups

The purpose of this thesis is to examine the influence of ethnic cultural values on the relationship of role demands and the work-family balance (WFB) experience. Past studies have found that the demands from work and family roles have a different impact on the work-family experience in people of different ethnicity. Researchers attribute these results to the cultural differences across the groups. However, there has been no empirical support for these assumptions because most past studies did not explicitly measure the cultural dimension in their design. Therefore, although studies have found ethnic differences in work-family experience, as cultural variables were not measured, it cannot be determined whether these differences were due to the differing ethnic groups’ cultural styles. The present thesis is set up to address this limitation in the literature, employing the Malay and Chinese ethnic groups in Malaysia as the study samples. The investigation consisted of pilot interviews and two survey studies. The interviews were carried out to establish the perception of WFB by target participants of a non-western nation. The first survey served to identify whether the Malay and Chinese ethnic groups residing under the same economic and social systems vary in their perceptions of work and family roles. The second survey tests the research model empirically, that is, whether cultural values moderate the relationship between role demands and WFB and if these moderation effects vary across ethnic groups. From the interviews, the results indicated that work-family experience is not a universal experience, but is partly culture-specific. Specifically, in the case of Malaysia, WFB is very much observed from the role obligation perspective. In particular, balance is perceived when work duties and household affairs are both adequately fulfilled. On the other hand, the conceptualisation of WFB in terms of role satisfaction and role interference also emerged in the interviews, suggesting the universality of these constructs across cultures. The findings from Survey One indicated that participants of different ethnicities in this study do not differ greatly in their perceptions regarding their participation in work and family roles. Generally, these participants revealed the less traditional attitudes towards women’s participation in work and family roles. However, variations were observed between the two groups in terms of reasons for working, spouses’ preferences towards their employment, and the extent to which their work role is perceived to impede their normative role performance in the household. Despite these differences, the Malay and Chinese ethnic groups showed more similarities than differences in their perceptions of work and family. The findings from Survey Two, which tested the research model, produced mixed results. On the whole, the results showed that the cultural dimensions examined in this study (i.e. collectivism, work identity and family identity) did influence the relationship between role demands and WFB experience, thus providing empirical evidence for the assumption in the literature that the relationship between role demand and work-family experience is moderated by cultural values. Most importantly, support was found for the proposition that these moderation effects vary between the Malay and Chinese ethnic groups. Moreover, this study also found evidence that Malays and Chinese differ significantly on collectivism and work identity cultural dimensions where Malays are found to be more collectivist than the Chinese, while work identity is stronger in the Chinese than in the Malays. There is no difference in the levels of family identity between the two groups. Of all the three moderators, work identity was deemed the most important because many of the supported hypotheses pertained to the work identity moderating effects. In contrast, family identity does not seem to have much moderating influence on role demand-WFB relationships, while the results for the collectivism moderator are mixed. As such, although not conclusive, it can be deduced that variations in the effects of role demand on work-family experience across ethnicity are a result of the groups’ cultural differences, thereby supporting the assumption in the literature.

Conceptualising use for information systems (IS) success

This thesis conceptualises Use for IS (Information Systems) success. While Use in this study describes the extent to which an IS is incorporated into the user’s processes or tasks, success of an IS is the measure of the degree to which the person using the system is better off. For IS success, the conceptualisation of Use offers new perspectives on describing and measuring Use. We test the philosophies of the conceptualisation using empirical evidence in an Enterprise Systems (ES) context. Results from the empirical analysis contribute insights to the existing body of knowledge on the role of Use and demonstrate Use as an important factor and measure of IS success. System Use is a central theme in IS research. For instance, Use is regarded as an important dimension of IS success. Despite its recognition, the Use dimension of IS success reportedly suffers from an all too simplistic definition, misconception, poor specification of its complex nature, and an inadequacy of measurement approaches (Bokhari 2005; DeLone and McLean 2003; Zigurs 1993). Given the above, Burton-Jones and Straub (2006) urge scholars to revisit the concept of system Use, consider a stronger theoretical treatment, and submit the construct to further validation in its intended nomological net. On those considerations, this study re-conceptualises Use for IS success. The new conceptualisation adopts a work-process system-centric lens and draws upon the characteristics of modern system types, key user groups and their information needs, and the incorporation of IS in work processes. With these characteristics, the definition of Use and how it may be measured is systematically established. Use is conceptualised as a second-order measurement construct determined by three sub-dimensions: attitude of its users, depth, and amount of Use. The construct is positioned in a modified IS success research model, in an attempt to demonstrate its central role in determining IS success in an ES setting. A two-stage mixed-methods research design—incorporating a sequential explanatory strategy—was adopted to collect empirical data and to test the research model. The first empirical investigation involved an experiment and a survey of ES end users at a leading tertiary education institute in Australia. The second, a qualitative investigation, involved a series of interviews with real-world operational managers in large Indian private-sector companies to canvass their day-to-day experiences with ES. The research strategy adopted has a stronger quantitative leaning. The survey analysis results demonstrate the aptness of Use as an antecedent and a consequence of IS success, and furthermore, as a mediator between the quality of IS and the impacts of IS on individuals. Qualitative data analysis on the other hand, is used to derive a framework for classifying the diversity of ES Use behaviour. The qualitative results establish that workers Use IS in their context to orientate, negotiate, or innovate. The implications are twofold. For research, this study contributes to cumulative IS success knowledge an approach for defining, contextualising, measuring, and validating Use. For practice, research findings not only provide insights for educators when incorporating ES for higher education, but also demonstrate how operational managers incorporate ES into their work practices. Research findings leave the way open for future, larger-scale research into how industry practitioners interact with an ES to complete their work in varied organisational environments.

Single crystal Raman spectroscopy of brandholzite Mg[Sb(OH)6]2•6H2O and bottinoite Ni[Sb(OH)6]2•6H2O and the polycrystalline Raman spectrum of mopungite Na[Sb(OH)6]

The single crystal Raman spectra of minerals brandholzite and bottinoite, formula M[Sb(OH)6]2•6H2O, where M is Mg+2 and Ni+2 respectively, and the non-aligned Raman spectrum of mopungite, formula Na[Sb(OH)6], are presented for the first time. The mixed metal minerals comprise of alternating layers of [Sb(OH)6]-1 octahedra and mixed [M(H2O)6]+2 / [Sb(OH)6]-1 octahedra. Mopungite comprises hydrogen bonded layers of [Sb(OH)6]-1 octahedra linked within the layer by Na+ ions. The spectra of the three minerals were dominated by the Sb-O symmetric stretch of the [Sb(OH)6]-1 octahedron, which occurs at approximately 620 cm-1. The Raman spectrum of mopungite showed many similarities to spectra of the di-octahedral minerals informing the view that the Sb octahedra gave rise to most of the Raman bands observed, particularly below 1200 cm-1. Assignments have been proposed based on the spectral comparison between the minerals, prior literature and density field theory calculations of the vibrational spectra of the free [Sb(OH)6]-1 and [M(H2O)6]+2 octahedra by a model chemistry of B3LYP/6-31G(d) and lanl2dz for the Sb atom. The single crystal data spectra showed good mode separation, allowing the majority of the bands to be assigned a symmetry species of A or E.

Mooting and technology : to what extent does using technology improve the mooting experience for students?

It is generally acknowledged that mooting is an effective way to enhance the teaching of practical skills in legal education as well as to provide an authentic learning experience with links to the real world. However, there are a number of impediments to students participating in mooting; in particular being located off-campus, inexperience and lack of time. It has been suggested that technology may be a means of overcoming these impediments. However the use of technology in mooting has not been tested. This paper will report on a trial of the use of Second Life and Elluminate and videoconferencing as platforms for the conduct of moots. The trials identified limitations in the use of technology for mooting in particularly in relation to the development of advocacy skills. The paper will conclude that these limitations can be overcome by careful consideration of the appropriate technology to be used depending on the context and the objectives to be achieved by the moot. It will also suggest that in order to provide an authentic use of online communication technology in a court setting, the best available technology should be used for the conduct of moot competitions.

Policy into practice : adoption of hazard mitigation measures by local government in Queensland : a collaborative research project between Queensland University of Technology and Emergency Management Queensland in association with Local Government of Queensland Disaster Management Alliance

The focus of the present research was to investigate how Local Governments in Queensland were progressing with the adoption of delineated DM policies and supporting guidelines. The study consulted Local Government representatives and hence, the results reflect their views on these issues. Is adoption occurring? To what degree? Are policies and guidelines being effectively implemented so that the objective of a safer, more resilient community is being achieved? If not, what are the current barriers to achieving this, and can recommendations be made to overcome these barriers? These questions defined the basis on which the present study was designed and the survey tools developed. While it was recognised that LGAQ and Emergency Management Queensland (EMQ) may have differing views on some reported issues, it was beyond the scope of the present study to canvass those views. The study resolved to document and analyse these questions under the broad themes of: • Building community capacity (notably via community awareness). • Council operationalisation of DM. • Regional partnerships (in mitigation/adaptation). Data was collected via a survey tool comprising two components: • An online questionnaire survey distributed via the LGAQ Disaster Management Alliance (hereafter referred to as the “Alliance”) to DM sections of all Queensland Local Government Councils; and • a series of focus groups with selected Queensland Councils

Latent degradation indicators estimation and prediction : a Monte Carlo approach

Asset health inspections can produce two types of indicators: (1) direct indicators (e.g. the thickness of a brake pad, and the crack depth on a gear) which directly relate to a failure mechanism; and (2) indirect indicators (e.g. the indicators extracted from vibration signals and oil analysis data) which can only partially reveal a failure mechanism. While direct indicators enable more precise references to asset health condition, they are often more difficult to obtain than indirect indicators. The state space model provides an efficient approach to estimating direct indicators by using indirect indicators. However, existing state space models to estimate direct indicators largely depend on assumptions such as, discrete time, discrete state, linearity, and Gaussianity. The discrete time assumption requires fixed inspection intervals. The discrete state assumption entails discretising continuous degradation indicators, which often introduces additional errors. The linear and Gaussian assumptions are not consistent with nonlinear and irreversible degradation processes in most engineering assets. This paper proposes a state space model without these assumptions. Monte Carlo-based algorithms are developed to estimate the model parameters and the remaining useful life. These algorithms are evaluated for performance using numerical simulations through MATLAB. The result shows that both the parameters and the remaining useful life are estimated accurately. Finally, the new state space model is used to process vibration and crack depth data from an accelerated test of a gearbox. During this application, the new state space model shows a better fitness result than the state space model with linear and Gaussian assumption.

The politics of technology adoption : Water metering in Progressive Era Chicago

This paper examines the interactions between knowledge and power in the adoption of technologies central to municipal water supply plans, specifically investigating decisions in Progressive Era Chicago regarding water meters. The invention and introduction into use of the reliable water meter early in the Progressive Era allowed planners and engineers to gauge water use, and enabled communities willing to invest in the new infrastructure to allocate costs for provision of supply to consumers relative to use. In an era where efficiency was so prized and the role of technocratic expertise was increasing, Chicago’s continued failure to adopt metering (despite levels of per capita consumption nearly twice that of comparable cities and acknowledged levels of waste nearing half of system production) may indicate that the underlying characteristics of the city’s political system and its elite stymied the implementation of metering technologies as in Smith’s (1977) comparative study of nineteenth century armories. Perhaps, as with Flyvbjerg’s (1998) study of the city of Aalborg, the powerful know what they want and data will not interfere with their conclusions: if the data point to a solution other than what is desired, then it must be that the data are wrong. Alternatively, perhaps the technocrats failed adequately to communicate their findings in a language which the political elite could understand, with the failure lying in assumptions of scientific or technical literacy rather than with dissatisfaction in outcomes (Benveniste 1972). When examined through a historical institutionalist perspective, the case study of metering adoption lends itself to exploration of larger issues of knowledge and power in the planning process: what governs decisions regarding knowledge acquisition, how knowledge and power interact, whether the potential to improve knowledge leads to changes in action, and, whether the decision to overlook available knowledge has an impact on future decisions.

Evaluation of financial incentives as a quality improvement strategy in the public hospital context : clinician attitudes, design variables, and economic costs

In 2008, a three-year pilot ‘pay for performance’ (P4P) program, known as ‘Clinical Practice Improvement Payment’ (CPIP) was introduced into Queensland Health (QHealth). QHealth is a large public health sector provider of acute, community, and public health services in Queensland, Australia. The organisation has recently embarked on a significant reform agenda including a review of existing funding arrangements (Duckett et al., 2008). Partly in response to this reform agenda, a casemix funding model has been implemented to reconnect health care funding with outcomes. CPIP was conceptualised as a performance-based scheme that rewarded quality with financial incentives. This is the first time such a scheme has been implemented into the public health sector in Australia with a focus on rewarding quality, and it is unique in that it has a large state-wide focus and includes 15 Districts. CPIP initially targeted five acute and community clinical areas including Mental Health, Discharge Medication, Emergency Department, Chronic Obstructive Pulmonary Disease, and Stroke. The CPIP scheme was designed around key concepts including the identification of clinical indicators that met the set criteria of: high disease burden, a well defined single diagnostic group or intervention, significant variations in clinical outcomes and/or practices, a good evidence, and clinician control and support (Ward, Daniels, Walker & Duckett, 2007). This evaluative research targeted Phase One of implementation of the CPIP scheme from January 2008 to March 2009. A formative evaluation utilising a mixed methodology and complementarity analysis was undertaken. The research involved three research questions and aimed to determine the knowledge, understanding, and attitudes of clinicians; identify improvements to the design, administration, and monitoring of CPIP; and determine the financial and economic costs of the scheme. Three key studies were undertaken to ascertain responses to the key research questions. Firstly, a survey of clinicians was undertaken to examine levels of knowledge and understanding and their attitudes to the scheme. Secondly, the study sought to apply Statistical Process Control (SPC) to the process indicators to assess if this enhanced the scheme and a third study examined a simple economic cost analysis. The CPIP Survey of clinicians elicited 192 clinician respondents. Over 70% of these respondents were supportive of the continuation of the CPIP scheme. This finding was also supported by the results of a quantitative altitude survey that identified positive attitudes in 6 of the 7 domains-including impact, awareness and understanding and clinical relevance, all being scored positive across the combined respondent group. SPC as a trending tool may play an important role in the early identification of indicator weakness for the CPIP scheme. This evaluative research study supports a previously identified need in the literature for a phased introduction of Pay for Performance (P4P) type programs. It further highlights the value of undertaking a formal risk assessment of clinician, management, and systemic levels of literacy and competency with measurement and monitoring of quality prior to a phased implementation. This phasing can then be guided by a P4P Design Variable Matrix which provides a selection of program design options such as indicator target and payment mechanisms. It became evident that a clear process is required to standardise how clinical indicators evolve over time and direct movement towards more rigorous ‘pay for performance’ targets and the development of an optimal funding model. Use of this matrix will enable the scheme to mature and build the literacy and competency of clinicians and the organisation as implementation progresses. Furthermore, the research identified that CPIP created a spotlight on clinical indicators and incentive payments of over five million from a potential ten million was secured across the five clinical areas in the first 15 months of the scheme. This indicates that quality was rewarded in the new QHealth funding model, and despite issues being identified with the payment mechanism, funding was distributed. The economic model used identified a relative low cost of reporting (under $8,000) as opposed to funds secured of over $300,000 for mental health as an example. Movement to a full cost effectiveness study of CPIP is supported. Overall the introduction of the CPIP scheme into QHealth has been a positive and effective strategy for engaging clinicians in quality and has been the catalyst for the identification and monitoring of valuable clinical process indicators. This research has highlighted that clinicians are supportive of the scheme in general; however, there are some significant risks that include the functioning of the CPIP payment mechanism. Given clinician support for the use of a pay–for-performance methodology in QHealth, the CPIP scheme has the potential to be a powerful addition to a multi-faceted suite of quality improvement initiatives within QHealth.

Defining and mapping teacher practice in technology classrooms

The indecision surrounding the definition of Technology extends to the classroom as not knowing what a subject “is” affects how it is taught. Similarly, its relative newness – and consequent lack of habitus in school settings - means that it is still struggling to find its own place in the curriculum as well as resolve its relationship with more established subject domains, particularly Science and Mathematics. The guidance from syllabus documents points to open-ended student-directed projects where extant studies indicate a more common experience of teacher –directed activities and an emphasis on product over process. There are issues too for researchers in documenting classroom observations and in analysing teacher practice in new learning environments. This paper presents a framework for defining and mapping classroom practice and for attempting to describe the social practice in the Technology classroom. The framework is a bricolage which draws on contemporary research. More formally, the development of the framework is consonant with the aim of design-based research to develop a flexible, adaptive and generalisable theory to better understanding a teaching domain where promise is not seen to match current reality. The framework may also inform emergent approaches to STEM (Science, Technology, Education and Mathematics) in education.

Designing disruption : linking participatory design and design thinking in technology orientated industries

A vast proportion of companies nowadays are looking to design and are focusing on the end users as a means of driving new projects. However still many companies are drawn to technological improvements which drive innovation within their industry context. The Australian livestock industry is no different. To date the adoption of new products and services within the livestock industry has been documented as being quite slow. This paper investigates how disruptive innovation should be a priority for these technologically focused companies and demonstrates how the use of design led innovation can bring about a higher quality engagement between end user and company alike. A case study linking participatory design and design thinking is presented. Within this, a conceptual model of presenting future scenarios to internal and external stakeholders is applied to the livestock industry; assisting companies to apply strategy, culture and advancement in meaningful product offerings to consumers.