Hot temperatures and morbidity : a systematic review and meta–analysis

Extreme temperatures have been shown to have a detrimental effect on health. Hot temperatures can increase the risk of mortality, particularly in people suffering from cardiorespiratory diseases. Given the onset of climate change, it is critical that the impact of temperature on health is understood, so that effective public health strategies can correctly identify vulnerable groups within the population. However, while effects on mortality have been extensively studied, temperature–related morbidity has received less attention. This study applied a systematic review and meta–analysis to examine the current literature relating to hot temperatures and morbidity.

Acoustic emission for diesel engine monitoring: A review and preliminary

Vibration analysis has been a prime tool in condition monitoring of rotating machines, however, its application to internal combustion engines remains a challenge because engine vibration signatures are highly non-stationary that are not suitable for popular spectrum-based analysis. Signal-to-noise ratio is a main concern in engine signature analysis due to severe background noise being generated by consecutive mechanical events, such as combustion, valve opening and closing, especially in multi-cylinder engines. Acoustic Emission (AE) has been found to give excellent signal-to-noise ratio allowing discrimination of fine detail of normal or abnormal events during a given cycle. AE has been used to detect faults, such as exhaust valve leakage, fuel injection behaviour, and aspects of the combustion process. This paper presents a review of AE application to diesel engine monitoring and preliminary investigation of AE signature measured on an 18-cylinder diesel engine. AE is compared with vibration acceleration for varying operating conditions: load and speed. Frequency characteristics of AE from those events are analysed in time-frequency domain via short time Fourier trasform. The result shows a great potential of AE analysis for detection of various defects in diesel engines.

Review of "Violence, Prejudice and Sexuality" by Stephen Tomsen (Routledge, New York and London, 2009)

Tomsen’s book Violence, Prejudice and Sexuality engages with important questions about sexuality and anti homosexual sentiment that criminologists have grappled with for some time. Tomsen’s work refines these questions in the context of essentialism, and notes how this concept has enabled only very specific ways of thinking about and analysing violence, prejudice, and sexuality. Indeed, thinking about the nexus between these three concepts are now almost taken for granted. As Tomsen demonstrates in his discussion of historical understandings of sexual desire, although social constructionism and queer perspectives have challenged essentialist notions of sexuality, research has in many respects upheld a binary understanding of heterosexuality as normal and homosexuality as abnormal. Interestingly, essentialist binaries like this have been conveniently employed in more recent times when activists align with minority status to gain basic human rights. While no one could deny the importance of access to rights and justice, Tomsen notes the danger inherent in arguments like this that draw on essentialism. He argues we are working through similar dichotomies of heterosexuality as normal and homosexuality as abnormal set up in very early research on sexual desire. The key difference now is that, in the rush towards public and political citizenship, ‘heterosexuals are recast as “perpetrators” and homosexuals as “victims”’ (Tomsen 2009: 16). Violence, Prejudice and Sexuality importantly notes this is no less an essentialist dichotomy and no less divisive....

Design for manufacturing : a review and case study

Design for Manufacturing (DFM) is a highly integral methodology in product development, starting from the concept development phase, with the aim of improving manufacturing productivity. It is used to reduce manufacturing costs in complex production environments, while maintaining product quality. While Design for Assembly (DFA) is focusing on elimination or combination of parts with other components, which in most cases relates to performing a function and manufacture operation in a simpler way, DFM is following a more holistic approach. Common consideration for DFM are standard components, manufacturing tool inventory and capability, materials compatibility with production process, part handling, logistics, tool wear and process optimization, quality control complexity or Poka-Yoke design. During DFM, the considerable background work required for the conceptual phase is compensated for by a shortening of later development phases. Current DFM projects normally apply an iterative step-by-step approach and eventually transfer to the developer team. The study is introducing a new, knowledge based approach to DFM, eliminating steps of DFM, and showing implications on the work process. Furthermore, a concurrent engineering process via transparent interface between the manufacturing engineering and product development systems is brought forward.

Disclosure of proxy voting information by Australian managed investment schemes

The US Securities and Exchange Comission requires registered management investment companies to disclose how they vote proxies relating to portfolio securities they hold. The primary purpose of this rule is to enable fund investors to monitor the role of institutional shareholders in the corporate governance practices of public companies. In Australia, despite reform proposals, there are no regulations requiring institutional investors to report proxy voting procedures and practises. There is little evidence of voluntary disclosure of proxy voting by Australian managed investment schemes in equities, indicating that there are costs involved in such disclosure.

Factors of process model comprehension : findings from a series of experiments

In order to make good decisions about the design of information systems, an essential skill is to understand process models of the business domain the system is intended to support. Yet, little knowledge to date has been established about the factors that affect how model users comprehend the content of process models. In this study, we use theories of semiotics and cognitive load to theorize how model and personal factors influence how model viewers comprehend the syntactical information of process models. We then report on a four-part series of experiments, in which we examined these factors. Our results show that additional semantical information impedes syntax comprehension, and that theoretical knowledge eases syntax comprehension. Modeling experience further contributes positively to comprehension efficiency, measured as the ratio of correct answers to the time taken to provide answers. We discuss implications for practice and research.

A systematic review : the effects of orientation programs for cancer patients and their family/carers

Objectives To assess the effects of information interventions which orient patients and their carers/family to a cancer care facility and the services available within the facility. Design Systematic review of randomised controlled trials (RCTs), cluster RCTs and quasi-RCTs. Data sources MEDLINE, CINAHL, PsycINFO, EMBASE and the Cochrane Central Register of Controlled Trials. Methods We included studies evaluating the effect of an orientation intervention, compared with a control group which received usual care, or with trials comparing one orientation intervention with another orientation intervention. Results Four RCTs of 610 participants met the criteria for inclusion. Findings from two RCTs demonstrated significant benefits of the orientation intervention in relation to reduced levels of distress (mean difference (MD): −8.96, 95% confidence interval (95%CI): −11.79 to −6.13), but non-significant benefits in relation to the levels state anxiety levels (MD −9.77) (95%CI: −24.96 to 5.41). There are insufficient data on the other outcomes of interest. Conclusions This review has demonstrated the feasibility and some potential benefits of orientation interventions. There was a low level of evidence to suggest that orientation interventions can reduce distress in patients. However, other outcomes, including patient knowledge recall/satisfaction, remain inconclusive. The majority of trials were subjected to high risk of bias and were likely to be insufficiently powered. Further well conducted and powered RCTs are required to provide evidence for determining the most appropriate intensity, nature, mode and resources for such interventions. Patient and carer-focused outcomes should be included.

Book Review: "Mark Considine, Jenny Lewis and Damon Alexander Networks, Innovation and Public Policy : Politicians, Bureaucrats and the Pathways to Change inside Government Houndsmills, UK: Palgrave Macmillan, 2009"

Having wrung the most from workforce and workplace productivity initiaitves, innovation has come to the fore as a key goal and directive for public sector organisations to become more efficient. This clarion call for innovation can be heard all around the world, with public services everywhere taking up the message to develop better, smarter, novel, more innovative processes, programs and policies. In the current push for innovation, networks are considered to be a superior vehicle through which collective knowledge can be shared and leveraged; replacing or at least supplementing the role function previously provided by inventive leaders...

Book Review : Beyond criminology : taking harm seriously edited by Paddy Hillyard, Christina Pantazis, Steve Tombs and Dave Gordon (2004)

Hillyard et al.'s Beyond Criminology: Taking Crime Seriously is an innovative collection that attempts to take criminology beyond state definitions of crime to discourses involving harm, or what the editors refer to as ‘zemiology’, or what could be called ‘social harm theory’. The central theme of the book is that ‘it makes no sense to separate out harms, which can be defined as criminal, from all other types of harm’ (p. 2). At long last, ‘harm’ is discussed with the theoretical and practical integrity it deserves as an academic and intellectual narrative. For too long it has been ignored or omitted from the criminological lexicon. This book ensures that it captures centre stage within analyses that refocus the agenda to deleterious acts not always covered by the state legislature...

Development priority zoning (DPZ)-led scenario simulation for regional land use change : the case of Suichang County, China

China has experienced an extraordinary level of economic development since the 1990s, following excessive competition between different regions. This has resulted in many resource and environmental problems. Land resources, for example, are either abused or wasted in many regions. The strategy of development priority zoning (DPZ), proposed by the Chinese National 11th Five-Year Plan, provides an opportunity to solve these problems by coordinating regional development and protection. In line with the rational utilization of land, it is proposed that the DPZ strategy should be integrated with regional land use policy. As there has been little research to date on this issue, this paper introduces a system dynamic (SD) model for assessing land use change in China led by the DPZ strategy. Land use is characterized by the prioritization of land development, land utilization, land harness and land protection (D-U-H-P). By using the Delphi method, a corresponding suitable prioritization of D-U-H-P for the four types of DPZ, including optimized development zones (ODZ), key development zones (KDZ), restricted development zones (RDZ), and forbidden development zones (FDZ) are identified. Suichang County is used as a case study in which to conduct the simulation of land use change under the RDZ strategy. The findings enable a conceptualization to be made of DPZ-led land use change and the identification of further implications for land use planning generally. The SD model also provides a potential tool for local government to combine DPZ strategy at the national level with land use planning at the local level.

Sherlockian adolescence for the twenty-first century : Conan Doyle’s ‘six dirty little scoundrels’ and contemporary children’s literature

Young adult literature is a socialising genre that encourages young readers to take up very particular ways of relating to historical or cultural materials. Recent years have seen a boom in Sherlockian YA fiction inviting reader identification either with the Baker Street Irregulars or an adolescent Holmes. In works by Anthony Read, Andrew Lane, Tracy Mack & Michael Citrin, and Tony Lee, the Sherlock canon provides a vocabulary for neo-Victorian young adult fiction to simultaneously invoke and defer a range of competing visions of working childhood as both at-risk and autonomous; of education as both oppression and emancipation; and of literary-cultural history as both populist and elitist. Such tensions can be traced in Conan Doyle’s own constructions of working children, and in the circulation of the Sherlock stories as popular or literary fictions. Drawing both on the Sherlock canon and its revisions, this paper reads current YA fiction’s deployment of Conan Doyle’s fictional universe as a tool for negotiating contemporary anxieties of adolescence.

Vulnerable road user groups : a review of younger drivers, motorcyclists and older drivers

Scientific efforts to understand and reduce the occurrence of road crashes continue to expand, particularly in the areas of vulnerable road user groups. Three groups that are receiving increasing attention within the literature are younger drivers, motorcyclists and older drivers. These three groups are at an elevated risk of being in a crash or seriously injured, and research continues to focus on the origins of this risk as well as the development of appropriate countermeasures to improve driving outcomes for these cohorts. However, it currently remains unclear what factors produce the largest contribution to crash risk or what countermeasures are likely to produce the greatest long term positive effects on road safety. This paper reviews research that has focused on the personal and environmental factors that increase crash risk for these groups as well as considers direction for future research in the respective areas. A major theme to emerge from this review is that while there is a plethora of individual and situational factors that influence the likelihood of crashes, these factors often combine in an additive manner to exacerbate the risk of both injury and fatality. Additionally, there are a number of risk factors that are pertinent for all three road user groups, particularly age and the level of driving experience. As a result, targeted interventions that address these factors are likely to maximise the flow-on benefits to a wider range of road users. Finally, there is a need for further research that aims to bridge the research-to-practice gap, in order to develop appropriate pathways to ensure that evidenced-based research is directly transferred to effective policies that improve safety outcomes.

The taxing effects of the advance pricing arrangement program: A review of APAs and their impact on stakeholders

The current transfer pricing rules contained in Australia’s taxation regime are designed to counter the underpayment of tax by businesses engaged in international related-party dealings. Currently, these transactions must take place at an arm’s length price, a requirement which is becoming increasingly difficult to demonstrate. This results in an increased risk of an audit by the Australian Taxation Office. If a taxpayer wishes to avoid the risk of an audit, and any ensuing penalties, there is one option: an advance pricing arrangement (‘APA’). An APA is an agreement whereby the future transfer pricing methodology to be used to determine the arm’s length price is agreed to by the taxpayer and the relevant tax authority or authorities. This article investigates the use of APAs as a solution to the problem of transfer pricing and considers their impact on stakeholders. It is argued that while APAs provide a valuable practical tool for multinational entities facing the challenges of the taxation of global trading under the current regime, they may not be a practical long term solution.

A review of models and model usage scenarios for an airport complex system

Airports represent the epitome of complex systems with multiple stakeholders, multiple jurisdictions and complex interactions between many actors. The large number of existing models that capture different aspects of the airport are a testament to this. However, these existing models do not consider in a systematic sense modelling requirements nor how stakeholders such as airport operators or airlines would make use of these models. This can detrimentally impact on the verification and validation of models and makes the development of extensible and reusable modelling tools difficult. This paper develops from the Concept of Operations (CONOPS) framework a methodology to help structure the review and development of modelling capabilities and usage scenarios. The method is applied to the review of existing airport terminal passenger models. It is found that existing models can be broadly categorised according to four usage scenarios: capacity planning, operational planning and design, security policy and planning, and airport performance review. The models, the performance metrics that they evaluate and their usage scenarios are discussed. It is found that capacity and operational planning models predominantly focus on performance metrics such as waiting time, service time and congestion whereas performance review models attempt to link those to passenger satisfaction outcomes. Security policy models on the other hand focus on probabilistic risk assessment. However, there is an emerging focus on the need to be able to capture trade-offs between multiple criteria such as security and processing time. Based on the CONOPS framework and literature findings, guidance is provided for the development of future airport terminal models.

Educating for change : a case for a pedagogy of desire in design eduation

Despite major inroads in demystifying creativity for the non-design disciplines, there has been very little movement in the design disciplines themselves beyond traditional paradigms. As argued in this paper, this is particularly noticeable in design education where traditional pedagogical approaches persist despite the emergence of new experimental pedagogies and the possibilities and opportunities they offer. In response, this paper describes what is revealed when a ‘pedagogy of desire’ is used as a critical lens to reflect on an experience of developing and implementing a first year interior design program involving first and second year undergraduate interior design and architecture students. Implications drawn from the review are presented and a case made for continuing experimentation and development of a pedagogy of desire for design learning and teaching.