Evidence for a simple linear relationship between MRSA rates and hand-washing compliance [Comment]

Is there a threshold above which hand-rub solution consumption is efficient for decreasing MRSA incidence? [J Hosp Infect. 2009] Association between an index of consumption of hand-rub solution and the incidence of acquired meticillin-resistant Staphylococcus aureus in an intensive care unit.

Shared values : diverse perspectives – engaging engineering educators in integrating Indigenous engineering knowledge into current curricula

BACKGROUND Engineering is a problem-based practically oriented discipline, whose practitioners aim to find effective solutions to engineering challenges, technically and economically. Engineering educators operate within a mandate to ensure that graduate engineers understand the practicalities and realities of good engineering practice. While this is a vital goal for the discipline, emerging influences are challenging the focus on ‘hard practicalities’ and requiring recognition of the cultural and social aspects of engineering. Expecting graduate engineers to possess communication skills essential for negotiating satisfactory outcomes in contexts of complex social beliefs about the impact of their work can be an unsettling and challenging prospect for engineering educators. This project identifies and addresses Indigenous engineering practices and principles, and their relevance to future engineering practices. PURPOSE This Office of Learning and Teaching (OLT) project proposes that what is known/discoverable about indigenous engineering knowledge and practices must be integrated into engineering curricula. This is an important aspect of ensuring that engineering as a profession responds competently to increasing demands for socially and environmentally responsible activity across all aspects of engineering activity. DESIGN/METHOD The project addresses i) means for appropriate inclusion of Indigenous students into usual teaching activities ii) assuring engineering educators have access to knowledge of Indigenous practices and skills relevant to particular engineering courses and topics iii) means for preparing all students to negotiate their way through issues of indigenous relationships with the land where engineering projects are planned. The project is undertaking wide-ranging research to collate knowledge about indigenous engineering principles and practices and develop relevant resource materials. RESULTS It is common to hear that such social issues as ‘Indigenous concerns’ are only of concern to environmental engineers. We challenge that perspective, and make the case that Indigenous knowledge is an important issue for all engineering educators in relation to effective integration of indigenous students and preparation of all engineering graduates to engage with indigenous communities. At the time of first contact, a rich and varied, technically literate, Indigenous social framework possessed knowledge of the environment that is not yet fully acknowledged in Australian society. A core outcome of the work will be development of resources relating to Indigenous engineering practices for inclusion in engineering core curricula. CONCLUSIONS A large body of technical knowledge was needed to survive and sustain human society in the complex environment that was Australia before 1788. This project is developing resource materials, and supporting documentation, about that knowledge to enable engineering educators to more easily integrate it into current curricula. The project also aims to demonstrate the importance for graduating engineers to appreciate the existence of diverse perspectives on engineering tasks and learn how to value - and employ - multiple paths to possible solutions.

Reduction of diesel engine exhaust emissions using non-thermal plasma technology

Non-thermal plasma (NTP) is a promising candidate for controlling engine exhaust emissions. Plasma is known as the fourth state of matter, where both electrons and positive ions co-exist. Both gaseous and particle emissions of diesel exhaust undergo chemical changes when they are exposed to plasma. In this project diesel particulate matter (DPM) mitigation from the actual diesel exhaust by using NTP technology has been studied. The effect of plasma, not only on PM mass but also on PM size distribution, physico-chemical structure of PM and PM removal mechanisms, has been investigated. It was found that NTP technology can significantly reduce both PM mass and number. However, under some circumstances particles can be formed by nucleation. Energy required to create the plasma with the current technology is higher than the benchmark set by the commonly used by the automotive industry. Further research will enable the mechanism of particle creation and energy consumption to be optimised.

Implementing the self-management threshold learning outcome for law : some intentional design strategies from the current curriculum toolbox

There is a growing awareness of the high levels of psychological distress being experienced by law students and the practising profession in Australia. In this context, a Threshold Learning Outcome (TLO) on self-management has been included in the six TLOs recently articulated as minimum learning outcomes for all Australian graduates of the Bachelor of Laws degree (LLB). The TLOs were developed during 2010 as part of the Australian Learning and Teaching Council’s (ALTC’s) project funded by the Australian Government to articulate ‘Learning and Teaching Academic Standards’. The TLOs are the result of a comprehensive national consultation process led by the ALTC’s Discipline Scholars: Law, Professors Sally Kift and Mark Israel.1 The TLOs have been endorsed by the Council of Australian Law Deans (CALD) and have received broad support from members of the judiciary and practising profession, representative bodies of the legal profession, law students and recent graduates, Legal Services Commissioners and the Law Admissions Consultative Committee. At the time of writing, TLOs for the Juris Doctor (JD) are also being developed, utilising the TLOs articulated for the LLB as their starting point but restating the JD requirements as the higher order outcomes expected of graduates of a ‘Masters Degree (Extended)’, this being the award level designation for the JD now set out in the new Australian Qualifications Framework.2 As Australian law schools begin embedding the learning, teaching and assessment of the TLOs in their curricula, and seek to assure graduates’ achievement of them, guidance on the implementation of the self-management TLO is salient and timely.

Internet-wide scanning taxonomy and framework

Industrial control systems (ICS) have been moving from dedicated communications to switched and routed corporate networks, making it probable that these devices are being exposed to the Internet. Many ICS have been designed with poor or little security features, making them vulnerable to potential attack. Recently, several tools have been developed that can scan the internet, including ZMap, Masscan and Shodan. However, little in-depth analysis has been done to compare these Internet-wide scanning techniques, and few Internet-wide scans have been conducted targeting ICS and protocols. In this paper we present a Taxonomy of Internet-wide scanning with a comparison of three popular network scanning tools, and a framework for conducting Internet-wide scans.

Soft-switching single inductor current-fed push-pull converter for PV applications

A switching control strategy is proposed for single inductor current-fed push-pull converter with a secondary side active voltage doubler rectifier or a voltage rectifier used in photovoltaic (PV) grid interfacing. The proposed switching control strategy helps to turn-on and turn-off the primary side power switches with zero-voltage and zero-current switching. The operation of the push-pull converter is analyzed for two modes of operation. The feasibility of the proposed switching control strategy is validated using simulation and experimental results.

HFL PV micro-inverter with front-end current-fed converter and half-wave cycloconverter

A high-frequency-link micro inverter is proposed with a front-end dual inductor push-pull converter and a grid-connected half-wave cycloconverter. Pulse width modulation is used to control the front-end converter and phase shift modulation is used at the back-end converter to obtain grid synchronized output current. A series resonant circuit and high-frequency transformer are used to interface the front-end and the back-end converters. The operation of the proposed micro-inverter in grid-connected mode is validated using MATLAB/Simpower simulation. Experimental results are provided to further validate the operation.

A modified Density-Based Scanning Algorithm with Noise for spatial travel pattern analysis from Smart Card AFC data

Smart Card Automated Fare Collection (AFC) data has been extensively exploited to understand passenger behavior, passenger segment, trip purpose and improve transit planning through spatial travel pattern analysis. The literature has been evolving from simple to more sophisticated methods such as from aggregated to individual travel pattern analysis, and from stop-to-stop to flexible stop aggregation. However, the issue of high computing complexity has limited these methods in practical applications. This paper proposes a new algorithm named Weighted Stop Density Based Scanning Algorithm with Noise (WS-DBSCAN) based on the classical Density Based Scanning Algorithm with Noise (DBSCAN) algorithm to detect and update the daily changes in travel pattern. WS-DBSCAN converts the classical quadratic computation complexity DBSCAN to a problem of sub-quadratic complexity. The numerical experiment using the real AFC data in South East Queensland, Australia shows that the algorithm costs only 0.45% in computation time compared to the classical DBSCAN, but provides the same clustering results.

Current pre-hospital traumatic brain injury management in China

BACKGROUND Traumatic brain injury (TBI) is associated with mo st trauma-related deaths. Secondary brain injury is the leading cause of in-hospital deaths after traumatic brain injury. By early prevention and slowing of the initial pathophysiological mechanism of secondary brain injury, pre- hospital service can signifi cantly reduce case-fata lity rates of TBI. In China, the incidence of TBI is increasing and the proportion of severe TBI is much higher than that in other countries. The objective of this paper is to review the pre-hospital management of TBI in China. DATA SOURCES A literature search was conducted in January 2014 using the China National Knowledge Infrastructure (CNKI). Articles on the assessment and treatment of TBI in pre-hospital settings practiced by Chinese doctors were identified. The information on the assessment and treatment of hypoxemia, hypotension, and brain hern iation was extracted from the identifi ed articles. RESULTS Of the 471 articles identified, 65 met the selecti on criteria. The existing literature indicated that current practices of pre-hospital TBI management in China were sub-optimal and varied considerably across different regions. CONCLUSION Since pre-hospital care is the weakest part of Chinese emergency care, appropriate training programs on pre-hospital TBI management are urgently needed in China.

Novel non-linear elastic structural analysis with generalised transverse element loads using a refined finite element

In the finite element modelling of structural frames, external loads such as wind loads, dead loads and imposed loads usually act along the elements rather than at the nodes only. Conventionally, when an element is subjected to these general transverse element loads, they are usually converted to nodal forces acting at the ends of the elements by either lumping or consistent load approaches. In addition, it is especially important for an element subjected to the first- and second-order elastic behaviour, to which the steel structure is critically prone to; in particular the thin-walled steel structures, when the stocky element section may be generally critical to the inelastic behaviour. In this sense, the accurate first- and second-order elastic displacement solutions of element load effect along an element is vitally crucial, but cannot be simulated using neither numerical nodal nor consistent load methods alone, as long as no equilibrium condition is enforced in the finite element formulation, which can inevitably impair the structural safety of the steel structure particularly. It can be therefore regarded as a unique element load method to account for the element load nonlinearly. If accurate displacement solution is targeted for simulating the first- and second-order elastic behaviour on an element on the basis of sophisticated non-linear element stiffness formulation, the numerous prescribed stiffness matrices must indispensably be used for the plethora of specific transverse element loading patterns encountered. In order to circumvent this shortcoming, the present paper proposes a numerical technique to include the transverse element loading in the non-linear stiffness formulation without numerous prescribed stiffness matrices, and which is able to predict structural responses involving the effect of first-order element loads as well as the second-order coupling effect between the transverse load and axial force in the element. This paper shows that the principle of superposition can be applied to derive the generalized stiffness formulation for element load effect, so that the form of the stiffness matrix remains unchanged with respect to the specific loading patterns, but with only the magnitude of the loading (element load coefficients) being needed to be adjusted in the stiffness formulation, and subsequently the non-linear effect on element loadings can be commensurate by updating the magnitude of element load coefficients through the non-linear solution procedures. In principle, the element loading distribution is converted into a single loading magnitude at mid-span in order to provide the initial perturbation for triggering the member bowing effect due to its transverse element loads. This approach in turn sacrifices the effect of element loading distribution except at mid-span. Therefore, it can be foreseen that the load-deflection behaviour may not be as accurate as those at mid-span, but its discrepancy is still trivial as proved. This novelty allows for a very useful generalised stiffness formulation for a single higher-order element with arbitrary transverse loading patterns to be formulated. Moreover, another significance of this paper is placed on shifting the nodal response (system analysis) to both nodal and element response (sophisticated element formulation). For the conventional finite element method, such as the cubic element, all accurate solutions can be only found at node. It means no accurate and reliable structural safety can be ensured within an element, and as a result, it hinders the engineering applications. The results of the paper are verified using analytical stability function studies, as well as with numerical results reported by independent researchers on several simple frames.

Current ePortfolio Practice in Australia

In order to support innovation and productivity to ensure ongoing national economic development and growth, the current policy environment of the Australian Federal Government seeks to enhance the quality of education, encourage widened access to education opportunities, and stimulate integration between vocational education and training and higher education. There is increasing evidence of the multiple avenues of transition within and between vocational education and training and higher education. ePortfolios offer the potential to be a meaningful medium for convergence and integration of education and training.

Meltdown : a tool to help in the interpretation of thermal melt curves acquired by differential scanning fluorimetry

The output of a differential scanning fluorimetry (DSF) assay is a series of melt curves, which need to be interpreted to get value from the assay. An application that translates raw thermal melt curve data into more easily assimilated knowledge is described. This program, called “Meltdown,” conducts four main activities—control checks, curve normalization, outlier rejection, and melt temperature (Tm) estimation—and performs optimally in the presence of triplicate (or higher) sample data. The final output is a report that summarizes the results of a DSF experiment. The goal of Meltdown is not to replace human analysis of the raw fluorescence data but to provide a meaningful and comprehensive interpretation of the data to make this useful experimental technique accessible to inexperienced users, as well as providing a starting point for detailed analyses by more experienced users.

Prior and posterior linear pooling for combining expert opinions: Uses and impact on Bayesian Networks

The use of expert knowledge to quantify a Bayesian Network (BN) is necessary when data is not available. This however raises questions regarding how opinions from multiple experts can be used in a BN. Linear pooling is a popular method for combining probability assessments from multiple experts. In particular, Prior Linear Pooling (PrLP), which pools opinions then places them into the BN is a common method. This paper firstly proposes an alternative pooling method, Posterior Linear Pooling (PoLP). This method constructs a BN for each expert, then pools the resulting probabilities at the nodes of interest. Secondly, it investigates the advantages and disadvantages of using these pooling methods to combine the opinions of multiple experts. Finally, the methods are applied to an existing BN, the Wayfinding Bayesian Network Model, to investigate the behaviour of different groups of people and how these different methods may be able to capture such differences. The paper focusses on 6 nodes Human Factors, Environmental Factors, Wayfinding, Communication, Visual Elements of Communication and Navigation Pathway, and three subgroups Gender (female, male),Travel Experience (experienced, inexperienced), and Travel Purpose (business, personal) and finds that different behaviors can indeed be captured by the different methods.