Eldercare demands, mental health, and work performance : the moderating role of satisfaction with eldercare tasks

Due to demographic changes, a growing number of employees provide in-home care to an elderly family member. Previous research suggested a negative relationship between employees' eldercare demands and their work performance. However, the empirical nature of this relationship and its boundary conditions and mediating mechanisms have been neglected. The goal of this multisource study was to examine a mediated-moderation model of eldercare demands, mental health, and work performance. Drawing on the theory of conservation of resources (Hobfoll, 1989), it was expected that employees' satisfaction with eldercare tasks would buffer the negative relationship between eldercare demands and work performance, and that mental health would mediate this moderating effect. Data were collected from 165 employees providing in-home eldercare, as well as from one colleague and one family member of each employee. Results of mediated-moderation analyses supported the hypothesized model. The findings suggest that interventions that aim to increase employees' satisfaction with eldercare tasks may help protect employees from the negative effects of high eldercare demands on mental health and, subsequently, on work performance.

Self-determination, control, and reactions to changes in workload : a work simulation

The objective of this experimental study is to capture the dynamic temporal processes that occur in changing work settings and to test how work control and individuals' motivational predispositions interact to predict reactions to these changes. To this aim, we examine the moderating effects of global self-determined and non-self-determined motivation, at different levels of work control, on participants' adaptation and stress reactivity to changes in workload during four trials of an inbox activity. Workload was increased or decreased at Trial 3, and adaptation to this change was examined via fluctuations in anxiety, coping, motivation, and performance. In support of the hypotheses, results revealed that, for non-self-determined individuals, low work control was stress-buffering and high work control was stress-exacerbating when predicting anxiety and intrinsic motivation. In contrast, for self-determined individuals, high work control facilitated the adaptive use of planning coping in response to a change in workload. Overall, this pattern of results demonstrates that, while high work control was anxiety-provoking and demotivating for non-self-determined individuals, self-determined individuals used high work control to implement an adaptive antecedent-focused emotion regulation strategy (i.e., planning coping) to meet situational demands. Other interactive effects of global motivation emerged on anxiety, active coping, and task performance. These results and their practical implications are discussed.

General self-efficacy influences affective task reactions during a work simulation : the temporal effects of changes in workload at different levels of control

This study investigated the effects of workload, control, and general self-efficacy on affective task reactions (i.e., demands-ability fit, active coping, and anxiety) during a work simulation. The main goals were: (1) to determine the extent general self-efficacy moderates the effects of demand and control on affective task reactions, and; (2) to determine if this varies as a function of changes in workload. Participants (N=141) completed an inbox activity under conditions of low or high control and within low and high workload conditions. The order of trials varied so that workload increased or decreased. Results revealed individuals with high general self-efficacy reported better demands-abilities fit and active coping as well as less anxiety. Three interactive effects were found. First, it was found that high control increased demands-abilities fit from trial 1 to trial 2, but only when workload decreased. Second, it was found that low efficacious individuals active coping increased in trial 2, but only under high control. Third, it was found that high control helped high efficacious individuals manage anxiety when workload decreased. However, for individuals with low general self-efficacy, neither high nor low control alleviated anxiety (i.e., whether workload increased or decreased over time).

Physical inactivity remains the greatest public health problem of the 21st century : evidence, improved methods and solutions using the '7 investments that work' as a framework

In 2009, BJSM's first editorial argued that ‘Physical inactivity is the greatest public health problem of the 21st century’.1 The data supporting that claim have not yet been challenged. Now, 5 years after BJSM published its first dedicated ‘Physical Activity is Medicine’ theme issue (http://bjsm.bmj.com/content/43/1.toc) we are pleased to highlight 23 new contributions from six countries. This issue contains an analysis of the cost of physical inactivity from the US Centre for Diseases Control.2 We also report the cost-effectiveness of one particular physical activity intervention for adults.3

Developing agency in the creative career : a design-based framework for work integrated learning

Research shows that approximately half of creative practitioners operate as embedded creatives by securing gainful employment within organisations located in the field beyond their core discipline. This foregrounds the significance of having the skills necessary to successfully cross the disciplinary boundaries in order to negotiate a professional role. The multiple implications of such reframing for emerging creative practitioners who navigate uncertain professional boundaries include developing a skill of identifying and successfully targeting the shifting professional and industry coordinates while remaining responsive to changes. A further implication involves creative practitioners engaging in a continuous cycle of re-negotiation of their professional identity making the management of multiple professional selves - along with creating and recreating a meaningful frame of references such as the language around their emerging practice - a necessary skill. This chapter presents a case study of a set of Work Integrated Learning subjects designed to develop in creative industries practitioners the skills to manage their emerging professional identities in response to the shifts in the professional world.

Sex, love and abuse : discourses on domestic violence and sexual assault

Sex, Love and Abuse intervenes in a timely way on some important issues that have become 'elephants in the room' for academic and policy considerations around sexual violence and abuse. In so doing, this book draws upon a range of literatures and novel empirical sources to encourage critical thinking about the relationship between sex, love and abuse, examining crimes including sexual assault, pornography, child sexual abuse and domestic violence. This provocative book seeks to destabilize essentialist understandings of these phenomena with a view to identifying the subtle and complex nature of relationships, which often defy easy explanation and categorisation. Focusing on theories, public discourses and moral ideals, Hayes connects romantic love, intimacy and harm in a unique philosophical analysis, exploring abuse in relationships and how such abuse is fostered.

Changes in ocular biometrics and refraction during near work in downward gaze over time

PURPOSE To investigate changes in the characteristics of the corneal optics, total optics, anterior biometrics and axial length of the eye during a near task, in downward gaze, over 10 min. METHODS Ten emmetropes (mean - 0.14 ± 0.24 DS) and 10 myopes (mean - 2.26 ± 1.42 DS) aged from 18 to 30 years were recruited. To measure ocular biometrics and corneal topography in downward gaze, an optical biometer (Lenstar LS900) and a rotating Scheimpflug camera (Pentacam HR) were inclined on a custom built, height and tilt adjustable table. The total optics of the eye were measured in downward gaze with binocular fixation using a modified Shack-Hartmann wavefront sensor. Initially, subjects performed a distance viewing task at primary gaze for 10 min to provide a "wash-out" period for prior visual tasks. A distance task (watching video at 6 m) in downward gaze (25°) and a near task (watching video on a portable LCD screen with 2.5 D accommodation demand) in primary gaze and 25°downward gaze were then carried out, each for 10 min in a randomized order. During measurements, in dichoptic view, a Maltese cross was fixated with the right (untested) eye and the instrument’s fixation target was fixated with the subject’s tested left eye. Immediately after (0 min), 5 and 10 min from the commencement of each trial, measurements of ocular parameters were acquired in downward gaze. RESULTS Axial length exhibited a significant increase with downward gaze and accommodation over time (p<0.05). The greatest axial elongation was observed in downward gaze with 2.5 D accommodation after 10 min (mean change from baseline 23±3 µm). Downward gaze also caused greater changes in anterior chamber depth (ACD) and lens thickness (LT) with accommodation (ACD mean change -163±12µm at 10 min; LT mean change 173±17 µm at 10 min) compared to primary gaze with accommodation (ACD mean change -138±12µm at 10 min; LT mean change 131±15 µm at 10 min). Both corneal power and total ocular power changed by a small but significant amount with downward gaze (p<0.05), resulting in a myopic shift (~0.10 D) in the spherical power of the eye compared with primary gaze. CONCLUSION The axial length, anterior biometrics and ocular refraction change significantly with accommodation in downward gaze as a function of time. These findings provide new insights into the optical and bio-mechanical changes of the eye during typical near tasks.

Creative Work Beyond the Creative Industries: An Introduction

Creative occupations exist across the entire economy. The creative worker’s habitus cannot be discovered by looking only in film studios, games companies or artist’s garrets. Work practices, evolved through the traditions of the creative and performing arts, are now deployed to create new services and products across all sectors, to develop process innovations, and to change the distribution thereof. Yet the bulk of academic study of creative work (both functionalist and critical), as well as the content of higher/further professional education programs and everyday understanding of creative workers, focuses on one subset of the Creative Industries: those involved in the production of cultural goods or services (film, television, music etc.) for consumption by the general public. And further, the bulk of existing academic work focuses on those creative workers employed in cultural production industries. However, as recent work has shown, this focus misses both the large (and increasing) number of creative workers embedded in industries beyond the core Creative Industries (for example, manufacturing, banking, mining) and those creative workers and firms that supply services to business as well as to the general public, such as architects, technical writers, and graphic designers (see Cunningham 2013; Potts and Cunningham 2008; Potts, Cunningham, Hartley and Omerod 2008). This book focuses on this subset of very important, and yet under-recognized creative workers: embedded creative workers and providers of creative services into other sectors of the economy, as indicated in the following taxonomy (Figure 1.1), which juxtaposes occupation and industry sector...

Embedded creatives in the Australian manufacturing industry

According to 2011 Australian Census figures, embedded creative employees (creative employees not working in the core Creative Industries) make up 2 per cent (or a total of 17 635) of manufacturing industry employees. The average for all industries is 1.6 per cent. In the 2011–2012 financial year the manufacturing industry formed 7.3 per cent of Australia’s gross domestic product (GDP), contributing approximately AU$106.5 billion to the economy (Department of Industry, Innovation, Science, Research and Tertiary Education 2013). Manufacturing is central to innovation, accounting for over one-quarter of all business expenditure in R&D in 2010–2011, representing around AU$4.8 billion invested in R&D (ibid.). Facing challenges such as sustainability concerns, ever-increasing offshore production and the global financial crisis, the Australian manufacturing industry needs to remain relevant and competitive to succeed. Innovation is one way to do this. Given the contribution of the manufacturing industry to the Australian economy, and the above-average portion of embedded creatives in manufacturing, it is important to consider what exactly embedded creatives add to the industry. This chapter, inspired by the Getting Creative in Healthcare report (Pagan, Higgs and Cunningham 2008), examines the contribution of embedded creatives to innovation in the manufacturing industry via case studies and supplemental data.

Policing in Context : An Introduction to Police Work in Australia

Policing in Context is a well structured introductory text that gives students the practical information they need to grasp the diverse roles, duties, powers and problems of policing in Australia. This book approaches policing in three key sections, creating a natural flow of information. The first section sets up the basic knowledge needed for understanding the history, context and structure of policing in Australia. The second section provides a description of the core skills, tasks and operations of police work. In the final section, chapters cover and reflect on contemporary and emerging issues.

Caring for emergency service personnel : does what we do work?

Most emergency service organisations have some form of staff support program that share general aims of promoting and maintaining the mental health of their workforce. Yet few of these services have been subject to evaluation and fewer still have commissioned external professional researchers to scrutinise their programs. The Queensland Ambulance (QAS) Service provides a comprehensive and multifaceted program that is both proactive and reactive in design and with the support of the Commissioner, was the subject of a rigorous evaluation throughout 2013. In this paper the program services are briefly outlined and the considered approach to the evaluation is presented within the context of existing scientific literature. Using focus groups, information regarding the uptake of the program’s various ‘arms’, and survey data, results suggest the program is widely used and that staff are very satisfied with the services provided. Further, analysis of established psychometric measures demonstrated organisational and interpersonal factors that are important in the promotion of mental health and in warding off the deleterious impacts that frontline emergency service staff can endure. Data presented in this paper indicate how best to ensure a professional quality of life for ambulance personnel, how to promote resilience to the sometimes extremely challenging aspects of the work role, and ways in which difficulties such as depression may be minimised.

Measuring child work and residence adjustments to parents' long-term care needs

This article estimates the effects of various parent and child characteristics on the choice of care arrangement of the parent, taking into account the potential endogeneity of some of the child characteristics. Three equations are estimated: a care choice equation, a child location equation, and a child work equation. Results suggest a hierarchy of family decision making; child locations affect the care decision, which affects child work decisions. The results also question previous research attempting to explain causes of secular trends in long-term care.

Organizational work-related road safety situational analysis: More than just an audit tool

Although safety statistics indicate that road crashes are the most common form of work-related fatalities, many organizations fail to treat company vehicles in the same manner as other physical safety hazards within the workplace. Traditionally, work-related road safety has targeted primarily driver-related issues and not adequately addressed organizational processes, such as the organizations’ safety system and risk management processes and practice. This inadequacy generally stems from a lack of specific contextual knowledge and basic requirements to improve work-related road safety, including the supporting systems to ensure any intervention strategy or initiative’s ongoing effectiveness. Therefore, informed by previous research and based on a case study methodology, the Organizational Work-Related Road Safety Situational Analysis was developed to assess organizations’ current work-related road safety system, including policy, procedures, processes and practice. The situational analysis tool is similar to a safety audit however is more comprehensive in detail, application and provides sufficient evidence to enable organizations to mitigate and manage their work-related road safety risks. In addition, data collected from this process assists organizations in making informed decisions regarding intervention strategy design, development, implementation and ongoing effectiveness. This paper reports on the effectiveness of the situational analysis tool to assess WRRS systems across five differing and diverse organizations; including gas exploration and mining, state government, local government, and not for profit/philanthropy. The outcomes of this project identified considerable differences in the degree by which the organizations’ addressed work-related road safety across their vehicle fleet operations and provides guidelines for improving organizations’ work-related road safety systems.