Prediction of the wash-off of traffic related semi- and non-volatile organic compounds from urban roads under climate change influenced rainfall characteristics

Traffic generated semi and non volatile organic compounds (SVOCs and NVOCs) pose a serious threat to human and ecosystem health when washed off into receiving water bodies by stormwater. Climate change influenced rainfall characteristics makes the estimation of these pollutants in stormwater quite complex. The research study discussed in the paper developed a prediction framework for such pollutants under the dynamic influence of climate change on rainfall characteristics. It was established through principal component analysis (PCA) that the intensity and durations of low to moderate rain events induced by climate change mainly affect the wash-off of SVOCs and NVOCs from urban roads. The study outcomes were able to overcome the limitations of stringent laboratory preparation of calibration matrices by extracting uncorrelated underlying factors in the data matrices through systematic application of PCA and factor analysis (FA). Based on the initial findings from PCA and FA, the framework incorporated orthogonal rotatable central composite experimental design to set up calibration matrices and partial least square regression to identify significant variables in predicting the target SVOCs and NVOCs in four particulate fractions ranging from >300-1 μm and one dissolved fraction of <1 μm. For the particulate fractions range >300-1 μm, similar distributions of predicted and observed concentrations of the target compounds from minimum to 75th percentile were achieved. The inter-event coefficient of variations for particulate fractions of >300-1 μm were 5% to 25%. The limited solubility of the target compounds in stormwater restricted the predictive capacity of the proposed method for the dissolved fraction of <1 μm.

Interlocked projects in safety competency and safety effectiveness indicators in the construction sector

Safety culture is a concept that has long been accepted in high risk industries such as aviation, nuclear industries and mining, however, considerable research is now also being undertaken within the construction sector. This paper discusses three recent interlocked projects undertaken in the Australian construction industry. The first project examined the development and implementation of a safety competency framework targeted at safety critical positions (SCP's) across first tier construction organisations. Combining qualitative and quantitative methods, the project: developed a matrix of SCP's (n=11) and safety management tasks (SMTs; n=39); mapped the process steps for their acquisition and development; detailed the knowledge, skills and behaviours required for all SMTs; and outlined potential organisational cultural outcomes from a successful implementation of the framework. The second project extended this research to develop behavioural guidelines for leaders to drive safety culture change down to second tier companies and to assist them to customise their own competency framework and implementation guidelines to match their aspirations and resources. The third interlocked project explored the use of safety effectiveness indicators (SEIs) as an industry-relevant assessment tool for reducing risk on construction sites. With direct linkages to safety competencies and SMT's, the SEIs are the next step towards an integrated safety cultural approach to safety and extend the concept of positive performance indicators (PPIs) by providing a valid, reliable, and user friendly measurement platform. Taken together, the results of the interlocked projects suggest that industry engaged collaborative safety culture research has many potential benefits for the construction industry.

Commentaries and Responses to "The Driver Behaviour Questionnaire as a predictor of accidents: A meta-analysis" [Commentaries lead by Anders af Wahlberg; Responses lead by J.C.F. de Winter]

The following discussion is in response to a 2010 article published in the Journal of Safety Research by J.C.F. de Winter and D. Dodou entitled “The Driver Behaviour Questionnaire as a predictor of accidents: A meta-analysis” (Volume 41, Number 6, pp. 463-470, available on sciencedirect.com). The editors are pleased to provide a forum for this exchange and welcome further comments.

Perceptions of visitor relationship marketing opportunities by destination marketers : an importance-performance analysis

Customer relationship marketing (CRM) initiatives are increasingly being adopted by businesses in the attempt to enhance brand loyalty and stimulate repeat purchases. The purpose of this study was to examine the extent to which destination marketing organisations (DMOs) around the world have developed a visitor relationship marketing (VRM) orientation. The proposition underpinning the study is that maintaining meaningful dialogue with previous visitors in some markets would represent a more efficient use of resources than above the line advertising to attract new visitors. Importance-performance analysis was utilised to measure destination marketers’ perceptions of the efficacy of CRM initiatives, and then rate their own organisation’s performance across the same range of initiatives. A key finding was that mean importance was higher than perceived performance for every item. While the small sample limits generalisability, in general there are appears to be a lack of strategic intent by DMOs to invest in VRM.

A review of models and model usage scenarios for an airport complex system

Airports represent the epitome of complex systems with multiple stakeholders, multiple jurisdictions and complex interactions between many actors. The large number of existing models that capture different aspects of the airport are a testament to this. However, these existing models do not consider in a systematic sense modelling requirements nor how stakeholders such as airport operators or airlines would make use of these models. This can detrimentally impact on the verification and validation of models and makes the development of extensible and reusable modelling tools difficult. This paper develops from the Concept of Operations (CONOPS) framework a methodology to help structure the review and development of modelling capabilities and usage scenarios. The method is applied to the review of existing airport terminal passenger models. It is found that existing models can be broadly categorised according to four usage scenarios: capacity planning, operational planning and design, security policy and planning, and airport performance review. The models, the performance metrics that they evaluate and their usage scenarios are discussed. It is found that capacity and operational planning models predominantly focus on performance metrics such as waiting time, service time and congestion whereas performance review models attempt to link those to passenger satisfaction outcomes. Security policy models on the other hand focus on probabilistic risk assessment. However, there is an emerging focus on the need to be able to capture trade-offs between multiple criteria such as security and processing time. Based on the CONOPS framework and literature findings, guidance is provided for the development of future airport terminal models.

Role of traffic in atmospheric accumulation of heavy metals and polycyclic aromatic hydrocarbons

Traffic related emissions have been recognised as one of the main sources of air pollutants. In the research study discussed in this paper, variability of atmospheric total suspended particulate matter (TSP), polycyclic aromatic hydrocarbons (PAH) and heavy metal (HM) concentrations with traffic and land use characteristics during weekdays and weekends were investigated. Data required for the study were collected from a range of sampling sites to ensure a wide mix of traffic and land use characteristics. The analysis undertaken confirmed that zinc has the highest concentration in the atmospheric phase during weekends as well as weekdays. Although the use of leaded gasoline was discontinued a decade ago, lead was the second most commonly detected heavy metal. This is attributed to the association of previously generated lead with roadside soil and re-suspension to the atmosphere. Soil related particles are the primary source of TSP and manganese to the atmosphere. The analysis further revealed that traffic sources are dominant in gas phase PAHs compared to the other sources during weekdays. Land use related sources become important contributors to atmospheric PAHs during weekends when traffic sources are at their minimal levels.

Doing blog research

Blogs and other online platforms for personal writing such as LiveJournal have been of interest to researchers across the social sciences and humanities for a decade now. Although growth in the uptake of blogging has stalled somewhat since the heyday of blogs in the early 2000s, blogging continues to be a major genre of Internet-based communication. Indeed, at the same time that mass participation has moved on to Facebook, Twitter, and other more recent communication phenomena, what has been left behind by the wave of mass adoption is a slightly smaller but all the more solidly established blogosphere of engaged and committed participants. Blogs are now an accepted part of institutional, group, and personal communications strategies (Bruns and Jacobs, 2006); in style and substance, they are situated between the more static information provided by conventional Websites and Webpages and the continuous newsfeeds provided through Facebook and Twitter updates. Blogs provide a vehicle for authors (and their commenters) to think through given topics in the space of a few hundred to a few thousand words – expanding, perhaps, on shorter tweets, and possibly leading to the publication of more fully formed texts elsewhere. Additionally, they are also a very flexible medium: they readily provide the functionality to include images, audio, video, and other additional materials – as well as the fundamental tool of blogging, the hyperlink itself. Indeed, the role of the link in blogs and blog posts should not be underestimated. Whatever the genre and topic that individual bloggers engage in, for the most part blogging is used to provide timely updates and commentary – and it is typical for such material to link both to relevant posts made by other bloggers, and to previous posts by the present author, both to background material which provides readers with further information about the blogger’s current topic, and to news stories and articles which the blogger found interesting or worthy of critique. Especially where bloggers are part of a larger community of authors sharing similar interests or views (and such communities are often indicated by the presence of yet another type of link – in blogrolls, often in a sidebar on the blog site, which list the blogger’s friends or favourites), then, the reciprocal writing and linking of posts often constitutes an asynchronous, distributed conversation that unfolds over the course of days, weeks, and months. Research into blogs is interesting for a variety of reasons, therefore. For one, a qualitative analysis of one or several blogs can reveal the cognitive and communicative processes through which individual bloggers define their online identity, position themselves in relation to fellow bloggers, frame particular themes, topics and stories, and engage with one another’s points of view. It may also shed light on how such processes may differ across different communities of interest, perhaps in correlation with the different societal framing and valorisation of specific areas of interest, with the socioeconomic backgrounds of individual bloggers, or with other external or internal factors. Such qualitative research now looks back on a decade-long history (for key collections, see Gurak, et al., 2004; Bruns and Jacobs, 2006; also see Walker Rettberg, 2008) and has recently shifted also to specifically investigate how blogging practices differ across different cultures (Russell and Echchaibi, 2009). Other studies have also investigated the practices and motivations of bloggers in specific countries from a sociological perspective, through large-scale surveys (e.g. Schmidt, 2009). Blogs have also been directly employed within both K-12 and higher education, across many disciplines, as tools for reflexive learning and discussion (Burgess, 2006).

Screening for alcohol and drug use in pregnancy

Objective - this study examined the clinical utility and precision of routine screening for alcohol and other drug use among women attending a public antenatal service. Study design - a survey of clients and audit of clinical charts. Participants and setting - clients attending an antenatal clinic of a large tertiary hospital in Queensland, Australia, from October to December 2009. Measurements and findings - data were collected from two sources. First, 32 women who reported use of alcohol or other drugs during pregnancy at initial screening were then asked to complete a full substance use survey. Second, data were collected from charts of 349 new clients who attended the antenatal clinic during the study period. Both sensitivity (86%, 67%) and positive predictive value (100%, 92%) for alcohol and other drug use respectively, were high. Only 15% of surveyed women were uncomfortable about being screened for substance use in pregnancy, yet the chart audit revealed poor staff compliance. During the study period, 25% of clients were either not screened adequately or not at all. Key conclusions and implications for practise - despite recommended universal screening in pregnancy and the apparent acceptance by our participants, alcohol and other drug (A&OD) screening in the antenatal setting remains problematic. Investigation into the reasons behind, and ways to overcome, the low screening rate could improve health outcomes for mothers and children in this at-risk group. Targeted education and training for midwives may form part of the solution as these clinicians have a key role in implementing prevention and early intervention strategies.

Acculturation stress in South Sudanese refugees : impact on marital relationships

A qualitative approach was used to explore the impact of acculturation stress on the marital relationships of South Sudanese refugees settled in Brisbane, Australia. Thirteen refugees, who were currently or previously married, participated in three gender specific focus groups. The perceived causes and possible solutions of conflict were thoroughly explored. Hypothetical scenarios were used to facilitate group discussion. Major issues causing conflict between couples were identified as: the management of finances and lack of family and social support. Several other areas of acculturation stress also emerged as factors associated with marital stress. There was a dissonance regarding the adherence to cultural gender roles. Freedom provided to women in Australia caused tension between the couples. Law enforcement officers were perceived as lacking cultural understanding and misinterpreting the couple distress. Finally, limited information provided to refugees pre and post migration was considered to hinder adjustment. The participants suggested a number of practical solutions to these issues which are potentially useful in guiding future refugee settlement programs.

Volume estimation from multiplanar 2D ultrasound images using a remote electromagnetic position and orientation sensor

A system is described for calculating volume from a sequence of multiplanar 2D ultrasound images. Ultrasound images are captured using a video digitising card (Hauppauge Win/TV card) installed in a personal computer, and regions of interest transformed into 3D space using position and orientation data obtained from an electromagnetic device (Polbemus, Fastrak). The accuracy of the system was assessed by scanning 10 water filled balloons (13-141 ml), 10 kidneys (147  200 ml) and 16 fetal livers (8  37 ml) in water using an Acuson 128XP/10 (5 MHz curvilinear probe). Volume was calculated using the ellipsoid, planimetry, tetrahedral and ray tracing methods and compared with the actual volume measured by weighing (balloons) and water displacement (kidneys and livers). The mean percentage error for the ray tracing method was 0.9 ± 2.4%, 2.7 ± 2.3%, 6.6 ± 5.4% for balloons, kidneys and livers, respectively. So far the system has been used clinically to scan fetal livers and lungs, neonate brain ventricles and adult prostate glands.

Improving access to quality clinical nurse teaching : a partnership between Australia and Vietnam

Until recently, standards to guide nursing education and practice in Vietnam were nonexistent. This paper describes the development and implementation of a clinical teaching capacity building project piloted in Hanoi, Vietnam. The project was part of a multi-component capacity building program designed to improve nurse education in Vietnam. Objectives of the project were to develop a collaborative clinically-based teaching model that encourages evidence-based, student-centred clinical learning. The model incorporated strategies to promote development of nursing practice to meet national competency standards. Thirty nurse teachers from two organisations in Hanoi participated in the program. These participants attended three workshops, and completed applied assessments, where participants implemented concepts from each workshop. The assessment tasks were planning, implementing and evaluating clinical teaching. On completion of the workshops, twenty participants undertook a study tour in Australia to refine the teaching model and develop an action plan for model implementation in both organisations, with an aim to disseminate the model across Vietnam. Significant changes accredited to this project have been noted on an individual and organisational level. Dissemination of this clinical teaching model has commenced in Ho Chi Minh, with further plans for more in-depth dissemination to occur throughout the country.

IT governance adoption in Malaysia : a preliminary investigation

IT Governance (ITG) adoption remains a relevant topic of study. While extensive research has been done looking into the drivers and critical success factors of ITG practice, there seems to be a lack of interest in identifying the barriers to its adoption. This study reports on a survey conducted to first: provide some primary data that suggest ITG adoption and maturity levels are still low, especially in a developing country like Malaysia; and second: to provide initial empirical support for model development. Results obtained supported our assumptions that: (1) ITG adoption and maturity levels are still relatively low in Malaysia, therefore justifying Malaysia as a suitable case; (2) organizational factors, environmental factors and characteristics of the innovation as identified from the literature may serve as possible barriers to adoption.

Individual differences in drivers’ cognitive processing of road safety messages

Using Gray and McNaughton’s (2000) revised Reinforcement Sensitivity Theory (r-RST), we examined the influence of personality on processing of words presented in gain-framed and loss-framed anti-speeding messages and how the processing biases associated with personality influenced message acceptance. The r-RST predicts that the nervous system regulates personality and that behaviour is dependent upon the activation of the Behavioural Activation System (BAS), activated by reward cues and the Fight-Flight-Freeze System (FFFS), activated by punishment cues. According to r-RST, individuals differ in the sensitivities of their BAS and FFFS (i.e., weak to strong), which in turn leads to stable patterns of behaviour in the presence of rewards and punishments, respectively. It was hypothesised that individual differences in personality (i.e., strength of the BAS and the FFFS) would influence the degree of both message processing (as measured by reaction time to previously viewed message words) and message acceptance (measured three ways by perceived message effectiveness, behavioural intentions, and attitudes). Specifically, it was anticipated that, individuals with a stronger BAS would process the words presented in the gain-frame messages faster than those with a weaker BAS and individuals with a stronger FFFS would process the words presented in the loss-frame messages faster than those with a weaker FFFS. Further, it was expected that greater processing (faster reaction times) would be associated with greater acceptance for that message. Driver licence holding students (N = 108) were recruited to view one of four anti-speeding messages (i.e., social gain-frame, social loss-frame, physical gain-frame, and physical loss-frame). A computerised lexical decision task assessed participants’ subsequent reaction times to message words, as an indicator of the extent of processing of the previously viewed message. Self-report measures assessed personality and the three message acceptance measures. As predicted, the degree of initial processing of the content of the social gain-framed message mediated the relationship between the reward sensitive trait and message effectiveness. Initial processing of the physical loss-framed message partially mediated the relationship between the punishment sensitive trait and both message effectiveness and behavioural intention ratings. These results show that reward sensitivity and punishment sensitivity traits influence cognitive processing of gain-framed and loss-framed message content, respectively, and subsequently, message effectiveness and behavioural intention ratings. Specifically, a range of road safety messages (i.e., gain-frame and loss-frame messages) could be designed which align with the processing biases associated with personality and which would target those individuals who are sensitive to rewards and those who are sensitive to punishments.

Reality Bytes: Using Technology in Mooting

This article considers how law schools can facilitate the development of technology skills by using technology to enhance access to mooting in settings that replicate legal practice. The authors conducted research into the use of technology by Australian law schools for mooting and evaluated an internal mooting competition using Elluminate, an online communication platform available to students through Blackboard. The analysis of the results of the survey and the Elluminate competition will demonstrate that technology can be used in mooting to provide an authentic learning experience. The paper concludes that while it is essential to teach technology skills as part of legal education, it is important that the benefits of using technology are made clear in order for it to be accepted and embraced by the students. Technology must also be available to all students considering the widening participation in higher education and consequent increasing diversity of law students.

Gaseous and particle emissions from an ethanol fumigated compression ignition engine

A 4-cylinder Ford 2701C test engine was used in this study to explore the impact of ethanol fumigation on gaseous and particle emission concentrations. The fumigation technique delivered vaporised ethanol into the intake manifold of the engine, using an injector, a pump and pressure regulator, a heat exchanger for vaporising ethanol and a separate fuel tank and lines. Gaseous (Nitric oxide (NO), Carbon monoxide (CO) and hydrocarbons (HC)) and particulate emissions (particle mass (PM2.5) and particle number) testing was conducted at intermediate speed (1700 rpm) using 4 load settings with ethanol substitution percentages ranging from 10-40 % (by energy). With ethanol fumigation, NO and PM2.5 emissions were reduced, whereas CO and HC emissions increased considerably and particle number emissions increased at most test settings. It was found that ethanol fumigation reduced the excess air factor for the engine and this led to increased emissions of CO and HC, but decreased emissions of NO. PM2.5 emissions were reduced with ethanol fumigation, as ethanol has a very low “sooting” tendency. This is due to the higher hydrogen-to-carbon ratio of this fuel, and also because ethanol does not contain aromatics, both of which are known soot precursors. The use of a diesel oxidation catalyst (as an after-treatment device) is recommended to achieve a reduction in the four pollutants that are currently regulated for compression ignition engines. The increase in particle number emissions with ethanol fumigation was due to the formation of volatile (organic) particles; consequently, using a diesel oxidation catalyst will also assist in reducing particle number emissions.