Resistances, facilitators and influences on professionals' knowledge sharing behaviour : a case study

The centrality of knowledge sharing to organisations' sustainability has been established. This case study illustrates the influences on individual knowledge sharing decision-making and behaviour among professionals and paraprofessionals - specifically civil engineers and design drafters - in a large public sector organisation that provides transportation infrastructure. The case examines the ways in which overlapping sets of values and behavioural drivers affect knowledge sharing orientation and practices in a collective of experts and novices working in an environment that is largely project-based. The alignment among sector, profession and organisation values provides a supportive environment for knowledge sharing, however individual behaviour is found to be most strongly influenced by the presence and quality of relational capital.

Synthesis, characterization and comparative OFET behaviour of indenofluorene-bithiophene and terthiophene alternating copolymers

The synthesis of alternating copolymers of tetraalkylindenofluorene with bithiophene and terthiophene using Suzuki polycondensation route is reported. We report on the optical and electrochemical properties of these copolymers. AFM analysis of the microscopic morphology of thin deposits showed that the copolymer with terthiophene units produced the more ordered films, with well-defined fibrillar structures, resulting from highly-regular dense packing due to strong π-π interchain interactions, in contrast to the amorphous bithiophene copolymer. Upon testing these materials in FETs the terthienyl copolymers displayed the higher charge mobilities among the studied compounds, with values of over 10-4 cm2 V-1 s-1 being obtained.

Synthesis and study of conductivity behaviour of blended conducting polymer films irradiated with swift heavy ions of silicon

In recent times, blended polymers have shown a lot of promise in terms of easy processability in different shapes and forms. In the present work, polyaniline emeraldine base (PANi-EB) was doped with camphor sulfonic acid (CSA) and combined with the conducting polymer polyfluorene (PF) as well as the insulating polymer polyvinyl chloride (PVC) to synthesize CSA doped PANi-PF and PANi-PVC blended polymers. It is well known that PANi when doped with CSA becomes highly conducting. However, its poor mechanical properties, such as low tensile, compressive, and flexural strength render PANi a non-ideal material to be processed for its various practical applications, such as electromagnetic shielding, anti-corrosion shielding, photolithography and microelectronic devices etc. Thus the search for polymers which are easily processable and are capable of showing high conductivity still continues. PANi-PVC blend was prepared, which showed low conductivity which is limiting factor for certain applications. Therefore, another processable polymer PF was chosen as conducting matrix. Conducting PF can be easily processed into various shapes and forms. Therefore, a blend mixture was prepared by using PANi and PF through the use of CSA as a counter ion which forms a "bridge" between the two polymeric components of the inter-polymer complex. Two blended polymers have been synthesized and investigated for their conductivity behaviour. It was observed that the blended film of CSA doped PANi-PVC showed a room temperature electrical conductivity of 2.8 × 10-7 S/cm where as the blended film made by CSA doped PANi with conducting polymer PF showed a room temperature conductivity of 1.3 × 10-5 S/cm. Blended films were irradiated with 100 MeV silicon ions with a view to increase their conductivity with a fluence ranging from 1011 ions to 1013 per cm2 from 15 UD Pelletron accelerator at NSC, New Delhi.

Where do consumers draw the line? : an investigation of deviant consumer behaviour

Using mixed-methods, this research investigated why consumers engage in deviant behaviors. It found that there is significant variation in how consumers perceive right and wrong, which calls for more tailored deterrence strategies to challenge how consumers justify deviant behaviours. Specifically, individuals draw on a number of factors when assessing right and wrong. While individuals agree on the polar acceptable and unacceptable behaviours, behaviours in between are questionable. When social consensus varies on a behaviour's acceptability, so to do the predictors of deviant behaviour. These findings contribute to consumer deviance and consumer ethics research.

Performance psychology applied to dance

The recent interest in the area of performance psychology has included a focus on applied practice within the performing arts. The use of psychology within this field has been occurring for many years, although practice has been observed to originate primarily from within clinical psychology in dealing with ‘problems’ (e.g. eating disorders). During the past 15 years, increased interest and focus has come from the field of sport psychology and its application to fields such as dance. Experience with the application of sport psychology in the dance profession has shown that dancers identify primarily with the concept of performance psychology. The focus of applied performance psychology practice with dancers has been observed to incorporate principles from across sport, clinical and organisational psychology, yet packaged together in such a way that the focus is on performance enhancement – whether that be in terms of dance technique, artistry, creativity, or personal skill development both on and off the stage. This paper focuses upon sharing the practitioner’s experience of the delivery of performance psychology to dancers (both professionals and dancers-in-training), and discussion of the considerations related to this undertaking within this unique population.

Learnings from the implementation of performance psychology as a subject within a university dance program

Similar to the focus on training in the technical, physical and artistic areas of dance, dance professionals, students and educators alike appear to be developing an increased awareness of how important training in psychology is to their success within dance. Over the past 4 years, lectures in performance psychology have been incorporated as part of a compulsory professional skills subject for second and third year students within a University dance program. The following presentation aims to share practitioner experience and learnings regarding the implementation of this subject within this context, its perceived effectiveness, and recommendations for future use.

The art of the positive pas de deux : putting positive psychology into dance!

Performance psychology has more recently included a focus on applied practice within the performing arts, and specifically the dance industry. Whilst the use of psychology within this field has been occurring for a number of years, it has primarily taken its cues from the area of sport psychology or clinical psychology when dealing with ‘problems’ (e.g. eating disorders). What has been evident with the more recent introduction of positive psychology concepts with this population is the observed responsiveness from dancers towards a strengths-based approach. The aim of the inclusion of these frameworks has been to assist in increasing the empowerment, personal responsibility and effectiveness of the dancers’ psychological preparation and skills in the area of performance – whether on stage or off.

Antisocial behaviour orders : Unanticipated directions in social network site development

Abstract: Social network technologies, as we know them today have become a popular feature of everyday life for many people. As their name suggests, their underlying premise is to enable people to connect with each other for a variety of purposes. These purposes however, are generally thought of in a positive fashion. Based on a multi-method study of two online environments, Habbo Hotel and Second Life, which incorporate social networking functionality, we she light on forms of what can be conceptualized as antisocial behaviours and the rationales for these. Such behaviours included: scamming, racist/homophobic attacks, sim attacks, avatar attacks, non-conformance to contextual norms, counterfeiting and unneighbourly behaviour. The rationales for sub behaviours included: profit, fun, status building, network disruption, accidental acts and prejudice. Through our analysis we are able to comment upon the difficulties of defining antisocial behaviour in such environments, particularly when such environments are subject to interpretation vis their use and expected norms. We also point to the problems we face in conducting our public and private lives given the role ICTs are playing in the convergence of these two spaces and also the convergence of ICTs themselves.

The impact of mobile phone distraction on the braking behaviour of young drivers : a hazard-based duration model

Braking is a crucial driving task with a direct relationship with crash risk, as both excess and inadequate braking can lead to collisions. The objective of this study was to compare the braking profile of young drivers distracted by mobile phone conversations to non-distracted braking. In particular, the braking behaviour of drivers in response to a pedestrian entering a zebra crossing was examined using the CARRS-Q Advanced Driving Simulator. Thirty-two licensed drivers drove the simulator in three phone conditions: baseline (no phone conversation), hands-free, and handheld. In addition to driving the simulator, each participant completed questionnaires related to driver demographics, driving history, usage of mobile phones while driving, and general mobile phone usage history. The drivers were 18–26 years old and split evenly by gender. A linear mixed model analysis of braking profiles along the roadway before the pedestrian crossing revealed comparatively increased decelerations among distracted drivers, particularly during the initial 20 kph of deceleration. Drivers’ initial 20 kph deceleration time was modelled using a parametric accelerated failure time (AFT) hazard-based duration model with a Weibull distribution with clustered heterogeneity to account for the repeated measures experiment design. Factors found to significantly influence the braking task included vehicle dynamics variables like initial speed and maximum deceleration, phone condition, and driver-specific variables such as licence type, crash involvement history, and self-reported experience of using a mobile phone whilst driving. Distracted drivers on average appear to reduce the speed of their vehicle faster and more abruptly than non-distracted drivers, exhibiting excess braking comparatively and revealing perhaps risk compensation. The braking appears to be more aggressive for distracted drivers with provisional licenses compared to drivers with open licenses. Abrupt or excessive braking by distracted drivers might pose significant safety concerns to following vehicles in a traffic stream.

Flexural–torsional buckling behaviour and design of cold-formed steel compression members at elevated temperatures

Current design rules for the member capacities of cold-formed steel columns are based on the same non-dimensional strength curve for both fixed and pinned-ended columns at ambient temperature. This research has investigated the accuracy of using current ambient temperature design rules in Australia/New Zealand (AS/NZS 4600), American (AISI S100) and European (Eurocode 3 Part 1.3) standards in determining the flexural–torsional buckling capacities of cold-formed steel columns at uniform elevated temperatures using appropriately reduced mechanical properties. It was found that these design rules accurately predicted the member capacities of pin ended lipped channel columns undergoing flexural torsional buckling at elevated temperatures. However, for fixed ended columns with warping fixity undergoing flexural–torsional buckling, the current design rules significantly underestimated the column capacities as they disregard the beneficial effect of warping fixity. This paper has therefore recommended the use of improved design rules developed for ambient temperature conditions to predict the axial compression capacities of fixed ended columns subject to flexural–torsional buckling at elevated temperatures within AS/NZS 4600 and AISI S100 design provisions. The accuracy of the proposed fire design rules was verified using finite element analysis and test results of cold-formed lipped channel columns at elevated temperatures except for low strength steel columns with intermediate slenderness whose behaviour was influenced by the increased nonlinearity in the stress–strain curves at elevated temperatures. Further research is required to include these effects within AS/NZS 4600 and AISI S100 design rules. However, Eurocode 3 Part 1.3 design rules can be used for this purpose by using suitable buckling curves as recommended in this paper.

Distortional buckling behaviour of fire exposed cold-formed steel columns

Cold-formed steel sections are commonly used in low-rise commercial and residential buildings. During fire events, cold-formed steel structural elements in these buildings can be exposed to elevated temperatures. Hence after such events there is a need to evaluate their residual strengths. However, only limited information is available in relation to the residual strength of fire exposed cold-formed steel sections. This research is aimed at investigating the distortional buckling capacities of fire exposed cold-formed lipped channel sections. A series of compression tests of fire exposed, short lipped channel columns made of varying steel grades and thicknesses was undertaken in this research. Test columns were first exposed to different elevated temperatures up to 800 oC, and then tested to failure after cooling down. Suitable finite element models were developed with post-fire mechanical properties to simulate the behaviour of tested columns and were validated using test results. The residual compression capacities of short columns were also predicted using the current cold-formed steel standards and compared with test and finite element analysis results. This comparison showed that ambient temperature design rules for columns can be used to predict the residual compression capacities of fire exposed short or laterally restrained cold-formed steel columns provided the maximum temperature experienced by the column can be estimated after a fire event. Such residual capacity assessments will allow engineers to evaluate the safety of fire exposed buildings. This paper presents the details of this experimental study, finite element analyses and the results.

Experimental studies on web crippling behaviour of hollow flange channel beams under two flange load cases

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel beam (LSB) subject to web crippling under End Two Flange (ETF) and Interior Two Flange (ITF) load cases. The LSB sections with two rectangular hollow flanges are made using a simultaneous cold-forming and electric resistance welding process. Due to the geometry of the LSB, and its unique residual stress characteristics and initial geometric imperfections, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending, predominant shear and combined actions. To date, however, no investigation has been conducted on the web crippling behaviour and strength of LSB sections. Hence an experimental study was conducted to investigate the web crippling behaviour and capacities of LSBs. Twenty-eight web crippling tests were conducted under ETF and ITF load cases, and the ultimate web crippling capacities were compared with the predictions from the design equations in AS/NZS 4600 and AISI S100. This comparison showed that AS/NZS 4600 and AISI S100 web crippling design equations are unconservative for LSB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs based on experimental results. Suitable design rules were also developed under the direct strength method (DSM) format.

The urgent need for career preview: Student expectations and graduate realities in music and dance

Unlike the work available in many creative disciplines, musicians and dancers have the possibility of full-time, company-based employment; however, participants far outweigh the number of available positions. As a result, many graduates become ‘enforced entrepreneurs’ as they shape their work to meet personal and professional needs. This paper first explores the career projections of 58 music and dance students who were surveyed in their first week of post-secondary study. It then contrasts these findings with the reality of graduate careers as reported by five of that cohort four years later. In contrast with the students’ overwhelming focus on performance roles, the graduate cohort reported a prevalence of portfolio careers incorporating both creative and non-creative roles. The paper characterises the notion of a performing arts ‘career’ as a messy concept fraught with misunderstanding. Implications include the need to heighten students’ career awareness and position intrinsic satisfaction as a valued career concept.