Research around practice partnerships: An example of building partnerships to address overweight and obesity in children

Prevention and management of childhood overweight and obesity is a health priority for governments and communities throughout the developed world. A conceptual model, Research around Practice in Childhood Obesity (RAPICO), has been developed to guide capacity building in a coordinated 'bench to fieldwork' initiative to address this public health problem. Translation of research findings into sustainable responses with optimal fit requires consideration of context-specific relevance, cost-effectiveness, feasibility and levels of available support. The RAPICO model uses program theory to describe a framework for progressing practitionercommunityresearch partnerships to address low, medium and high levels of risk for childhood overweight and obesity within community settings. A case study describing the development of a logic model to inform risk-linked responses to childhood overweight and obesity is presented for the Ipswich community in south-east Queensland.

The application of building information modeling to enhance organisational learning

The construction industry is a knowledge-based industry where various actors with diverse expertise create unique information within different phases of a project. The industry has been criticized by researchers and practitioners as being unable to apply newly created knowledge effectively to innovate. The fragmented nature of the construction industry reduces the opportunity of project participants to learn from each other and absorb knowledge. Building Information Modelling (BIM), referring to digital representations of constructed facilities, is a promising technological advance that has been proposed to assist in the sharing of knowledge and creation of linkages between firms. Previous studies have mainly focused on the technical attributes of BIM and there is little evidence on its capability to enhance learning in construction firms. This conceptual paper identifies six ‘functional attributes’ of BIM that act as triggers to stimulate learning: (1) comprehensibility; (2) predictability; (3) accuracy; (4) transparency; (5) mutual understanding and; (6) integration.

Exploring accuracy factors in cost estimating practice towards implementing Building Information Modelling (BIM)

Cost estimating has been acknowledged as a crucial component of construction projects. Depending on available information and project requirements, cost estimates evolve in tandem with project lifecycle stages; conceptualisation, design development, execution and facility management. The premium placed on the accuracy of cost estimates is crucial to producing project tenders and eventually in budget management. Notwithstanding the initial slow pace of its adoption, Building Information Modelling (BIM) has successfully addressed a number of challenges previously characteristic of traditional approaches in the AEC, including poor communication, the prevalence of islands of information and frequent reworks. Therefore, it is conceivable that BIM can be leveraged to address specific shortcomings of cost estimation. The impetus for leveraging BIM models for accurate cost estimation is to align budgeted and actual cost. This paper hypothesises that the accuracy of BIM-based estimation, as more efficient, process-mirrors of traditional cost estimation methods, can be enhanced by simulating traditional cost estimation factors variables. Through literature reviews and preliminary expert interviews, this paper explores the factors that could potentially lead to more accurate cost estimates for construction projects. The findings show numerous factors that affect the cost estimates ranging from project information and its characteristic, project team, clients, contractual matters, and other external influences. This paper will make a particular contribution to the early phase of BIM-based project estimation.

Cost estimating practice incorporating Building Information Modelling (BIM): Malaysian Quantity Surveyors perspectives

Cost estimating is a key task within Quantity Surveyors’ (QS) offices. Provision of an accurate estimate is vital to ensure that the objectives of the client are met by staying within the client’s budget. Building Information Modelling (BIM) is an evolving technology that has gained attention in the construction industries all over the world. Benefits from the use of BIM include cost and time savings if the processes used by the procurement team are adapted to maximise the benefits of BIM. BIM can be used by QSs to automate aspects of quantity take-off and the preparation of estimates, decreasing turnaround time and assist in controlling errors and inaccuracies. The Malaysian government has decided to require the use of BIM for its projects beginning from 2016. However, slow uptake is reported in the use of BIM both within companies and to support collaboration within the Malaysian industry. It has been recommended that QSs to start evaluating the impact of BIM on their practices. This paper reviews the perspectives of QSs in Malaysia towards the use of BIM to achieve more dependable results in their cost estimating practice. The objectives of this paper include identifying strategies in improving practice and potential adoption drivers that lead QSs to BIM usage in their construction projects. From the expert interviews, it was found out that, despite still using traditional methods and not practising BIM, the interviewees still acquire limited knowledge related to BIM. There are some drivers that potentially motivate them to employ BIM in their practices. These include client demands, innovation in traditional methods, speed in estimating costs, reduced time and costs, improvement in practices and self-awareness, efficiency in projects, and competition from other companies. The findings of this paper identify the potential drivers in encouraging Malaysian Quantity Surveyors to exploit BIM in their construction projects.

Building an evaluation instrument for China's hospital emergency preparedness: A systematic review of preparedness instruments

Objectives: The aim of this report is to identify from the literature common themes relating to the concept of hospital preparedness for emergencies to develop an agreed framework for evaluation. Method: A systematic literature search identified appropriate articles for critical appraisal. A meta-ethnography approach was used to synthesize the findings, using both reciprocal translation and line-of-argument synthesis. Results: From an initial 2162 articles, we identified 13 articles that specifically addressed the aims of this review and formed the basis of the intended analysis. Conclusion: Hospital emergency preparedness is essential for effective disaster relief. Developing a systematic and structured methodology is necessary to assess hospital preparedness. (Disaster Med Public Health Preparedness: 2014:0:1-9)

Speaking of supervision: A dialogic approach to building higher degree research supervision capacity in the creative arts

In the emergent field of creative practice higher degrees by research, first generation supervisors have developed new models of supervision for an unprecedented form of research that combines creative practice and written thesis. In a national research project, entitled 'Effective supervision of creative practice higher research degrees', we set out to capture and share early supervisors' insights, strategies and approaches to supporting their creative practice PhD students. From the insights we gained during the early interview process, we expanded our research methods in line with a distributed leadership model and developed a dialogic framework. This led us to unanticipated conclusions and unexpected recommendations. In this study, we primarily draw on philosopher and literary theorist Mikhail Bakhtin's dialogics to explain how giving precedence to the voices of supervisors not only facilitated the articulation of dispersed tacit knowledge, but also led to other 20 discoveries. These include the nature of supervisors' resistance to prescribed models, policies and central academic development programmes; the importance of polyvocality and responsive dialogue in enabling continued innovation in the field; the benefits to supervisors of reflecting, discussing and sharing practices with colleagues; and the value of distributed leadership and dialogue to academic development and supervision capacity building in research education.

A holistic, institution-wide approach to building sessional staff capacity

Sessional Academics enhance students’ learning experience by bringing a diverse range of perspectives and expertise into the classroom. As industry specialists, research students, and recent graduates who have excelled in their courses, they complement the discipline expertise of career academics. With increasing casualization of the academic workforce, Sessional Academics now deliver the majority of face-to-face undergraduate teaching in Australian Universities. To enable them to realize their full potential as effective contributors to student learning and course quality, universities need to offer effective training and access to advice and support and facilitate engagement in university life. However, in the face of complex and diverse contexts, overwhelming numbers, and the transitory nature of sessional cohorts, few universities have developed a comprehensive, systematic approach. During the past three years at QUT, we have set out to develop a multifaceted approach to Sessional Academic support and development. In this paper I will explain why and how we have done so, and describe the range of strategies and programs we have developed. They include a central academic development program, which is structured and scaffolded with learning objectives and outcomes, and aligned with a graduate certificate in Academic Practice; a Sessional Academic Success program, which deploys experienced, school-based sessional academic success advisors to provide local support, build a sense of community, and offer discipline focused academic development; an online, dialogic communication strategy; and opportunities to present and be acknowledged for good learning and teaching practices. Together, these strategies have impacted on sessional academics’ confidence, learning and teaching capacity, reflection and engagement.

Performance analysis of solar desiccant-evaporative cooling for a commercial building under different Australian climates

This paper evaluates and compares the system performance of a solar desiccant-evaporative cooling (SDEC) system with a referenced conventional variable air volume (VAV) system for a typical office building in all 8 Australian capital cities. A simulation model of the building is developed using the whole building simulation software EnergyPlus. The performance indicators for the comparison are system coefficient of performance (COP), annual primary energy consumption, annual energy savings, and annual CO2 emissions reduction. The simulation results show that Darwin has the most apparent advantages for SDEC system applications with an annual energy savings of 557 GJ and CO2 emission reduction of 121 tonnes. The maximum system COP is 7. For other climate zones such as Canberra, Hobart and Melbourne, the SDEC system is not as energy efficient as the conventional VAV system.

Building creative connections: An analysis of a creative arts widening participation program

Widening participation or outreach agendas have been a major part of higher education policy since the early 2000s. These policies and programs seek to increase marginalised groups’ access to further study through activities, tutoring programs, workshops, and other provisions. Some programs openly state their intention to assist people from low socioeconomic backgrounds to become more civically engaged and socially mobile by improving their education, which creates an immediate link between education and social capital (see Morley 2012; Hillmert and Jacob 2010). Social capital refers to the ‘connections among individuals’ and the consequent value of the things they do together (Putnam 2000; Gauntlett 2011). Media and creative arts widening participation programs, arguably, are better equipped to build social capital than any other form of outreach, due to their relationship-building capacity (Gauntlett 2011; Kinder and Harland 2004). This article analyses Queensland University of Technology’s Creative Industries Widening Participation Program. It investigates social capital and its relationship with higher education in outreach initiatives in order to identify how media and creative arts widening participation programs have the capacity to influence the attitudes of low socioeconomic background students towards higher education.

Building instance knowledge network for word sense disambiguation

In this paper, a new high precision focused word sense disambiguation (WSD) approach is proposed, which not only attempts to identify the proper sense for a word but also provides the probabilistic evaluation for the identification confidence at the same time. A novel Instance Knowledge Network (IKN) is built to generate and maintain semantic knowledge at the word, type synonym set and instance levels. Related algorithms based on graph matching are developed to train IKN with probabilistic knowledge and to use IKN for probabilistic word sense disambiguation. Based on the Senseval-3 all-words task, we run extensive experiments to show the performance enhancements in different precision ranges and the rationality of probabilistic based automatic confidence evaluation of disambiguation. We combine our WSD algorithm with five best WSD algorithms in senseval-3 all words tasks. The results show that the combined algorithms all outperform the corresponding algorithms.

Materials and technologies for energy conversion, saving and storage: A global network enabling capacity-building for sustainable energy in developing countries

Access to energy is a fundamental component of poverty abatement. People who live in homes without electricity are often dependent on dirty, time-consuming and disproportionately expensive solid fuel sources for heating and cooking. [1] In developing countries, the Human Development Index (HDI), which comprises measures of standard of living, longevity and educational attainment, increases rapidly with per capita electricity use. [2] For these reasons the United Nations has been making a concerted effort to promote global access to energy, first by naming 2012 the Year of Sustainable Energy for All, [3] and now by declaring 2014-2024 the Decade of Sustainable Energy for All. [4]

ASEAN and ADB implementing new approaches to building road safety capacity

Following the Association of Southeast Asian Nations (ASEAN) senior transport officials meeting in May 2011, the Secretariat requested the Asian Development Bank (ADB) to provide assistance to improve road safety in ASEAN. In response, ADB, funded by the Japan Fund for Poverty Reduction, has begun an innovative approach to capacity building that has already been adapted and replicated in other sub-regions. This paper will discuss the model central to the project. The Road Safety Capacity Building for ASEAN Project commenced in May 2013. Each country has appointed a National Focal Point (NFP) to identify and coordinate information. A team of International Experts were appointed to develop materials and present a comprehensive train the trainer program focused on five key areas. Thirty eight senior Government officers from across ASEAN attended a two week program at ADB headquarters in Manila and will arrange and deliver specific training and associated activities to other colleagues within their country. ADB has appointed a National Consultant to work in partnership with the trainees on a range of activities including development of “pipeline project proposals” for funding consideration investors and donors. As part of the project, a draft ASEAN Regional Road Safety Strategy document has been prepared and consultation will further refine its directions and contents. The project will reach its conclusion in 2015 and a follow up phase three project is being considered.

Empowering PNG Women through Building Media Arts Production Capacity as Cultural Drivers: Showreel

The creative work comprises six short digital screen stories and emerges from a collaboration between the Discipline of Film Screen and Animation at Queensland University of Technology and the Centre for Social and Creative Media at University of Goroka, funded via the Department of Foreign Affairs and Trade's Australia Awards Fellowship. Six fellows traveled from Papua New Guinea to Brisbane for a two-week intensive course to learn the advanced skills necessary in order to create media that will empower women and girls to make more of their own economies in Papua New Guinea, and increase the representation of women and their well-being through leadership and decision-making. The resulting creative work is evidence of innovative media teaching-making methods designed to build human and cultural assets in PNG and address the increasing demand for media materials driven by the influx of mobile phones and internet services. The creative work provides a platform to directly address and positively impact gender issues in PNG and builds on the success of the Pawa Meri project, which trained six female directors to tell stories of women in leadership roles in PNG. One of the directors was a producer of this creative work. The creative work frames but problematises the complex issues influencing gender equity through the selection of content and narrative structures in ways which address the dynamics of male/female relationships and power in PNG society and will include strategies to illustrate transformed male and female behaviours. The creative work adopts a scaffolded approach, incorporating the findings of the Train the Trainer approach developed by UoG and QUT for the Life Drama research project. The creative work takes into account current developmental themes and approaches in the production of rich media products, and skills the key participants so that they are able to in turn train others in the wider community. The creative work was presented to partners and key stakeholders on 3 July 2015 at the Glasshouse, QUT Creative Industries Precinct and at the Dean’s Research Seminar Poster Exhibition 15 July 2015 at Room 212-213, Level 2, J Block, Gardens Point QUT and subsequent eBook. It has since returned to PNG to be showcased and distributed, and the skills and strategies disseminated.

Happily ever after: Romance, gender and the building blocks of domestic violence

My sister describes the state of something being a psychological or personal 'issue' - such as a trauma, compulsion, phobia, or obsession - as having 'brain spaghetti'. For example, apparently she has spaghetti about me pinning her down as a child and tickling her until she screamed for mercy. She knows this because when her spouse tried to do the same, the experience she had as a child came flooding back as a complex tangle of fears, feelings, and mental images. Notwithstanding the trauma inflicted on a sibling in my youth, the spaghetti metaphor is a simple but useful tool for explaining how complex our experiences are, and I bring it up here because I believe a lot of people have spaghetti about love. So much so, that often love becomes distorted, sometimes to the point of making one completely blind to manipulation and abuse. Part of the blame for 'love spaghetti' can be allotted to media depictions of romance and gender, which helps entrench and maintain our deeply held beliefs about what relationships should look like.

Building personas of students accessing a peer-facilitated support for learning program

The modern student represents a change from the traditional learner. More than ever before, additional resources are available online and yet personalised learning and peer-assistance programs are becoming an essential part of tertiary education delivery. This paper presents the first stage in a user-centred design approach to the analysis of the completeness and efficacy of such a personalised, peer-based support for learning program. This approach used an iterative design methodology based on contextual interview, workshops and focus groups to develop personas representing students visiting the program. Initial uses of these developed personas have included training of new personnel as well as the evaluation of the program. Overall the use of this user-centred approach and iterative persona development methodology has yielded an invaluable resource for the design of support for learning programs across the higher education industry within Australia and beyond.