Roundabout design guidelines and cycling safety

Review conducted as part of a Queensland Department of Transport and Main Roads funded project ‘Roundabout design review’. The project examined: - Design guidelines - Factors that affect safety at roundabouts

The development of a guideline of care for patients with a Sengstaken-Blakemore Tube insitu in a general Intensive Care Unit using translational change theory

Aims & Objectives - identify and diagnose the current problems associated with patient care with regard to the nursing management of patients with Sengstaken-Blakemore tubes insitu; - Identify current nursing practice currently in place within the ICU and the hospital; identify the method by which the assessment and provision of nursing care is delivered in the ICU

Resolving cryptic species complexes of major tephritid pests

An FAO/IAEA Co-ordinated Research Project (CRP) on “Resolution of Cryptic Species Complexes of Tephritid Pests to Overcome Constraints to SIT Application and International Trade” was conducted from 2010 to 2015. As captured in the CRP title, the objective was to undertake targeted research into the systematics and diagnostics of taxonomically challenging fruit fly groups of economic importance. The scientific output was the accurate alignment of biological species with taxonomic names; which led to the applied outcome of assisting FAO and IAEA Member States in overcoming technical constraints to the application of the Sterile Insect Technique (SIT) against pest fruit flies and the facilitation of international agricultural trade. Close to 50 researchers from over 20 countries participated in the CRP, using coordinated, multidisciplinary research to address, within an integrative taxonomic framework, cryptic species complexes of major tephritid pests. The following progress was made for the four complexes selected and studied: Anastrepha fraterculus complex – Eight morphotypes and their geographic and ecological distributions in Latin America were defined. The morphotypes can be considered as distinct biological species on the basis of differences in karyotype, sexual incompatibility, post-mating isolation, cuticular hydrocarbon, pheromone, and molecular analyses. Discriminative taxonomic tools using linear and geometric morphometrics of both adult and larval morphology were developed for this complex. Bactrocera dorsalis complex – Based on genetic, cytogenetic, pheromonal, morphometric, and behavioural data, which showed no or only minor variation between the Asian/African pest fruit flies Bactrocera dorsalis, B. papayae, B. philippinensis and B. invadens, the latter three species were synonymized with B. dorsalis. Of the five target pest taxa studied, only B. dorsalis and B. carambolae remain as scientifically valid names. Molecular and pheromone markers are now available to distinguish B. dorsalis from B. carambolae. Ceratitis FAR Complex (C. fasciventris, C. anonae, C. rosa) – Morphology, morphometry, genetic, genomic, pheromone, cuticular hydrocarbon, ecology, behaviour, and developmental physiology data provide evidence for the existence of five different entities within this fruit fly complex from the African region. These are currently recognised as Ceratitis anonae, C. fasciventris (F1 and F2), C. rosa and a new species related to C. rosa (R2). The biological limits within C. fasciventris (i.e. F1 and F2) are not fully resolved. Microsatellites markers and morphological identification tools for the adult males of the five different FAR entities were developed based on male leg structures. Zeugodacus cucurbitae (formerly Bactrocera (Zeugodacus) cucurbitae) – Genetic variability was studied among melon fly populations throughout its geographic range in Africa and the Asia/Pacific region and found to be limited. Cross-mating studies indicated no incompatibility or sexual isolation. Host preference and genetic studies showed no evidence for the existence of host races. It was concluded that the melon fly does not represent a cryptic species complex, neither with regard to geographic distribution nor to host range. Nevertheless, the higher taxonomic classification under which this species had been placed, by the time the CRP was started, was found to be paraphyletic; as a result the subgenus Zeugodacus was elevated to genus level.

Solubility of ibuprofen in aqueous ethanol at low ethanol contents

The solubility of ibuprofen was measured in water (W) - ethanol (E) mixtures from 0 to 50% w/w ethanol at 10, 25 and 40 °C by the dissolution method using UV spectrophotometry to determine the ibuprofen concentrations. The UV calibration for ibuprofen in different water - ethanol mixtures showed Beer - Lambert linearity, however the slopes differed, which indicated the structure of the drug is influenced by the solvent system i.e. the water - ethanol ratio. The ibuprofen solubility in water (zero ethanol) is low (~ 50 ppm) but increases near exponentially with increasing ethanol content. At 40 °C, there is phase separation between 34% and 63% w/w E/(E+W). The solubility data will be used to select precipitation crystallizer conditions to directly produce free flowing ibuprofen particles (<5 m) for developing a dry powder inhaler (DPI) formulation for lung delivery.

Shaping global teacher identity in a short-term mobility programme

This article explores the shaping of Australian and Malaysian pre-service teachers’ possible selves in a short-term mobility programme. With the theory of possible selves, individuals imagine who they will become based on their past and current selves. The focus of the research was on pre-service teachers’ possible selves as global and culturally responsive teachers. The experiential learning through participation in the programme allowed participants to consider their future possible selves as teachers with a deeper understanding of diverse learners’ needs and how they might strive to address these needs in their own classrooms. The scaffolding of reflections in the programme encouraged the pre-service teachers to take on multiple perspectives, to step outside their comfort zones and in many ways to see the world from different eyes. The research found that through experiential learning in the short-term mobility programme both the Australian and Malaysian pre-service teachers gained in positioning their cultural selves currently and as future teachers, suggesting that there is merit in utilising the theory of possible selves in future research in the area of shaping teacher identity.

Teaching for Learning, Living and Serving

I offer four eclectic maxims for schooling. They do not represent a cohesive philosophy of schooling or education, but they are a sampling of my views which I hope reflect and honour the great life’s work of Phil Hughes.

Australian innovation ecosystem: A critical review of the national innovation support mechanisms

Innovation is understood as the combination of existing ideas or the generation of new ideas into new processes, products and services, and widely viewed as the main driver of growth in contemporary economies. In the age of the knowledge economy, successful economic development is intimately linked to a country’s capacity to generate, acquire, absorb, disseminate, and apply innovation towards advanced technology products and services. This development approach is labelled as knowledge-based economic development and highly associated with a capacity embodied in a country’s national innovation ecosystem. The research reported in this paper aims to critically review the Australian innovation ecosystem in order to provide a better understanding on the potential impacts of policy and support mechanisms on the innovation and knowledge generation capacity. The investigation places Australia’s innovation system and national-level innovation support mechanisms under the microscope. The methodology of the study is twofold. Firstly, it undertakes a critical review of the literature and government policy documents to better understand the innovation policy and support mechanisms in the country. It, then, conducts a survey to capture Australian innovation companies’ perceptions on the role and effectiveness of the existing innovation incentive programs. The paper concludes with a discussion on the key insights and findings and potential policy and support directions of the country to achieve a flourishing knowledge economy.

PMU measurement based dynamic load modeling using SVC devices in online environment

Online dynamic load modeling has become possible with the availability of Static Voltage Compensator (SVC) and Phasor Measurement Unit (PMU) devices. The power of the load response to the small random bounded voltage fluctuations caused from SVC can be measured by PMU for modelling purposes. The aim of this paper is to illustrate the capability of identifying an aggregated load model from high voltage substation level in the online environment. The induction motor is used as the main test subject since it contributes the majority of the dynamic loads. A test system representing simple electromechanical generator model serving dynamic loads through the transmission network is used to verify the proposed method. Also, dynamic load with multiple induction motors are modeled to achieve a better realistic load representation.

Power system stability implications from electromechanical wave propagation

Electromechanical wave propagation characterizes the first-swing dynamic response in a spatially delayed manner. This paper investigates the characteristics of this phenomenon in two-dimensional and one-dimensional power systems. In 2-D systems, the wave front expands as a ripple in a pond. In 1-D systems, the wave front is more concentrated, retains most of its magnitude, and travels like a pulse on a string. This large wave front is more impactful upon any weak link and easily causes transient instability in 1-D systems. The initial disturbance injects both high and low frequency components, but the lumped nature of realistic systems only permits the lower frequency components to propagate through. The kinetic energy split at a junction is equal to the generator inertia ratio in each branch in an idealized continuum system. This prediction is approximately valid in a realistic power system. These insights can enhance understanding and control of the traveling waves.

Realisation of cost-informed process support within the YAWL workflow environment

Organisations are always focussed on ensuring that their business operations are performed in the most cost-effective manner, and that processes are responsive to ever-changing cost pressures. In many organisations, however, strategic cost-based decisions at the managerial level are not directly or quickly translatable to process-level operational support. A primary reason for this disconnect is the limited system-based support for cost-informed decisions at the process-operational level in real time. In this paper, we describe the different ways in which a workflow management system can support process-related decisions, guided by cost-informed considerations at the operational level, during execution. As a result, cost information is elevated from its non-functional attribute role to a first-class, fully functional process perspective. The paper defines success criteria that a WfMS should meet to provide such support, and discusses a reference implementation within the YAWL workflow environment that demonstrates how the various types of cost-informed decision rules are supported, using an illustrative example.

A taxonomic approach to understanding managerial ethical decision making approaches of clinically and non-clinically trained healthcare managers in Australia

Objective To understand differences in the managerial ethical decision-making styles of Australian healthcare managers through the exploratory use of the Managerial Ethical Profiles (MEP) Scale. Background Healthcare managers (doctors, nurses, allied health practitioners and non-clinically trained professionals) are faced with a raft of variables when making decisions within the workplace. In the absence of clear protocols and policies healthcare managers rely on a range of personal experiences, personal ethical philosophies, personal factors and organizational factors to arrive at a decision. Understanding the dominant approaches to managerial ethical decision-making, particularly for clinically trained healthcare managers, is a fundamental step in both increasing awareness of the importance of how managers make decisions, but also as a basis for ongoing development of healthcare managers. Design Cross-sectional. Methods The study adopts a taxonomic approach that simultaneously considers multiple ethical factors that potentially influence managerial ethical decision-making. These factors are used as inputs into cluster analysis to identify distinct patterns of influence on managerial ethical decision-making. Results Data analysis from the participants (n=441) showed a similar spread of the five managerial ethical profiles (Knights, Guardian Angels, Duty Followers, Defenders and Chameleons) across clinically trained and non-clinically trained healthcare managers. There was no substantial statistical difference between the two manager types (clinical and non-clinical) across the five profiles. Conclusion This paper demonstrated that managers that came from clinical backgrounds have similar ethical decision-making profiles to non-clinically trained managers. This is an important finding in terms of manager development and how organisations understand the various approaches of managerial decision-making across the different ethical profiles.

Do health inquiries lead to health system change? What have we learnt from recent health inquiries and will the same mistakes happen again?

Since 2001 there have been numerous Commissions of Inquiry into health system failures across the world. While the Inquiries were established to examine poor patient outcomes, each has identified a range of leadership and management shortcomings that have contributed to a poor standard of patient care. While there is an acknowledgement that different heath systems have different contexts, this paper highlights a number of themes that are common across Inquiries. It will discuss a number of common system failures in Inquiries spanning from 2001 to 2013 and pose questions as to why these types of failures are likely to re-occur, as well as possible learnings for health service management and leadership to address a number of these common themes.

Compression use during an exercise intervention and associated changes in breast cancer-related lymphoedema

Aim This study assessed the association between compression use and changes in lymphoedema observed in women with breast cancer-related lymphoedema who completed a 12 week exercise intervention. Methods This work uses data collected from a 12 week exercise trial, whereby women were randomly allocated into either aerobic-based only (n=21) or resistance-based only (n=20) exercise. Compression use during the trial was at the participant’s discretion. Differences in lymphoedema (measured by L-Dex score and inter-limb circumference difference [%]) and associated symptoms between those who wore, and did not wear compression during the 12 week intervention were assessed. We also explored participants’ reasons surrounding compression during exercise. Results No significant interaction effect between time and compression use for lymphoedema was observed. There was no difference between groups over time in the number or severity of lymphoedema symptoms. Irrespective of compression use, there were trends for reductions in the proportion of women reporting severe symptoms, but lymphoedema status did not change. Individual reasons for the use of compression, or lack thereof, varied markedly. Conclusion Our findings demonstrated an absence of a positive or negative effect from compression use during exercise on lymphoedema. Current and previous findings suggest the clinical recommendation that garments must be worn during exercise is questionable, and its application requires an individualised approach.

Single household domestic water heater design and control utilising PV energy: The untapped energy storage solution

Photovoltaic (PV) panels and electric domestic water heater with storage (DWH) are widely used in households in many countries. However, DWH should be explored as an energy storage mechanism before batteries when households have excess PV energy. Through a residential case study in Queensland, Australia, this paper presents a new optimized design and control solution to reduce water heating costs by utilizing existing DWH energy storage capacity and increasing PV self-consumption for water heating. The solution is produced by evaluating the case study energy profile and numerically maximizing the use of PV for DWH. A conditional probability matrix for different solar insolation and hot water usage days is developed to test the solution. Compared to other tariffs, this solution shows cost reduction from 20.8% to 63.3% This new solution could encourage solar households move to a more economical and carbon neutral water heating method.