A trial of the distribution of chlamydia self-collection postal specimen kits from Australian community pharmacies

We explored the feasibility of community pharmacies for the distribution of chlamydia specimen self-collection kits, which featured a transport medium allowing postage of urine specimens in Australia. Eligible clients were requested to complete a code-matched risk-screening questionnaire in the pharmacy, and the derived risk scores were compared to the test results from the corresponding specimen. Four Queensland pharmacies distributed 156 kits, while 44 questionnaires and 18 specimens were received.

A framework for integrating disadvantaged analysis into transportation planning models

This research paper aims to develop a method to explore the travel behaviour differences between disadvantaged and non-disadvantaged populations. It also aims to develop a modelling approach or a framework to integrate disadvantage analysis into transportation planning models (TPMs). The methodology employed identifies significantly disadvantaged groups through a cluster analysis and the paper presents a disadvantage-integrated TPM. This model could be useful in determining areas with concentrated disadvantaged population and also developing and formulating relevant disadvantage sensitive policies. (a) For the covering entry of this conference, please see ITRD abstract no. E214666.

Interactive image manipulation for surgical planning

The Australian e-Health Research Centre in collaboration with the Queensland University of Technology's Paediatric Spine Research Group is developing software for visualisation and manipulation of large three-dimensional (3D) medical image data sets. The software allows the extraction of anatomical data from individual patients for use in preoperative planning. State-of-the-art computer technology makes it possible to slice through the image dataset at any angle, or manipulate 3D representations of the data instantly. Although the software was initially developed to support planning for scoliosis surgery, it can be applied to any dataset whether obtained from computed tomography, magnetic resonance imaging or any other imaging modality.

'State' of play : Queensland report

A number of recent legislative amendments impact on property law practice in Queensland. Property Law (Mortgagor Protection) Amendment Act 2008 (Qld) Body Corporate and Community Management Amendment Act 2009 (Qld) Residential Tenancies and Rooming Accommodation Act 2008 (Qld) Sustainable Planning Act 2009 (Qld) Vegetation Management and Other Legislation Amendment Bill 2009 (Qld) Property Agents and Motor Dealers Act 2000 (Qld)

Forced landing technologies for unmanned aerial vehicles : towards safer operations

While using unmanned systems in combat is not new, what will be new in the foreseeable future is how such systems are used and integrated in the civilian space. The potential use of Unmanned Aerial Vehicles in civil and commercial applications is becoming a fact, and is receiving considerable attention by industry and the research community. The majority of Unmanned Aerial Vehicles performing civilian tasks are restricted to flying only in segregated space, and not within the National Airspace. The areas that UAVs are restricted to flying in are typically not above populated areas, which in turn are the areas most useful for civilian applications. The reasoning behind the current restrictions is mainly due to the fact that current UAV technologies are not able to demonstrate an Equivalent Level of Safety to manned aircraft, particularly in the case of an engine failure which would require an emergency or forced landing. This chapter will preset and guide the reader through a number of developments that would facilitate the integration of UAVs into the National Airspace. Algorithms for UAV Sense-and-Avoid and Force Landings are recognized as two major enabling technologies that will allow the integration of UAVs in the civilian airspace. The following sections will describe some of the techniques that are currently being tested at the Australian Research Centre for Aerospace Automation (ARCAA), which places emphasis on the detection of candidate landing sites using computer vision, the planning of the descent path trajectory for the UAV, and the decision making process behind the selection of the final landing site.

Urban informatics, ubiquitous computing and social media for healthy cities

The increasing ubiquity of digital technology, internet services and location-aware applications in our everyday lives allows for a seamless transitioning between the visible and the invisible infrastructure of cities: road systems, building complexes, information and communication technology, and people networks create a buzzing environment that is alive and exciting. Driven by curiosity, initiative and interdisciplinary exchange, the Urban Informatics Research Lab at Queensland University of Technology (QUT), Brisbane, Australia, is an emerging cluster of people interested in research and development at the intersection of people, place and technology with a focus on cities, locative media and mobile technology. This paper introduces urban informatics as a transdisciplinary practice across people, place and technology that can aid local governments, urban designers and planners in creating responsive and inclusive urban spaces and nurturing healthy cities. Three challenges are being discussed. First, people, and the challenge of creativity explores the opportunities and challenges of urban informatics that can lead to the design and development of new tools, methods and applications fostering participation, the democratisation of knowledge, and new creative practices. Second, technology, and the challenge of innovation examines how urban informatics can be applied to support user-led innovation with a view to promote entrepreneurial ideas and creative industries. Third, place, and the challenge of engagement discusses the potential to establish places within cities that are dedicated to place-based applications of urban informatics with a view to deliver community and civic engagement strategies.

Online we are all able bodied : Online psychological sense of community and social support found through membership of disability-specific websites promotes well-being for people living with a physical disability

People with a physical disability are a population who for a number of reasons may be vulnerable to social isolation. Research into Internet-based support sites has found that social support and an online sense of community can be developed through computer mediated communication channels. This study aims to gain an understanding of the benefits that membership of disability-specific online communities may have for people with a physical disability. An online survey was administered to a sample of users of such sites (N = 160). Results indicated that users did receive moral support and personal advice through participating in such online communities. Further, results indicated that online social support and feeling a sense of community online were positively associated with participants' well-being in the areas of personal relations and personal growth.

Feasibility of brief psychological distress screening by a community-based telephone helpline for cancer patients and carers

Background Up to one-third of people affected by cancer experience ongoing psychological distress and would benefit from screening followed by an appropriate level of psychological intervention. This rarely occurs in routine clinical practice due to barriers such as lack of time and experience. This study investigated the feasibility of community-based telephone helpline operators screening callers affected by cancer for their level of distress using a brief screening tool (Distress Thermometer), and triaging to the appropriate level of care using a tiered model. Methods Consecutive cancer patients and carers who contacted the helpline from September-December 2006 (n = 341) were invited to participate. Routine screening and triage was conducted by helpline operators at this time. Additional socio-demographic and psychosocial adjustment data were collected by telephone interview by research staff following the initial call. Results The Distress Thermometer had good overall accuracy in detecting general psychosocial morbidity (Hospital Anxiety and Depression Scale cut-off score ≥ 15) for cancer patients (AUC = 0.73) and carers (AUC = 0.70). We found 73% of participants met the Distress Thermometer cut-off for distress caseness according to the Hospital Anxiety and Depression Scale (a score ≥ 4), and optimal sensitivity (83%, 77%) and specificity (51%, 48%) were obtained with cut-offs of ≥ 4 and ≥ 6 in the patient and carer groups respectively. Distress was significantly associated with the Hospital Anxiety and Depression Scale scores (total, as well as anxiety and depression subscales) and level of care in cancer patients, as well as with the Hospital Anxiety and Depression Scale anxiety subscale for carers. There was a trend for more highly distressed callers to be triaged to more intensive care, with patients with distress scores ≥ 4 more likely to receive extended or specialist care. Conclusions Our data suggest that it was feasible for community-based cancer helpline operators to screen callers for distress using a brief screening tool, the Distress Thermometer, and to triage callers to an appropriate level of care using a tiered model. The Distress Thermometer is a rapid and non-invasive alternative to longer psychometric instruments, and may provide part of the solution in ensuring distressed patients and carers affected by cancer are identified and supported appropriately.

Collaborative destination branding : planning for tourism development through design in the Waterfall Way, NSW, Australia

This thesis develops, applies and analyses a collaborative design methodology for branding a tourism destination. The area between the Northern Tablelands and the Mid-North Coast of New South Wales, Australia, was used as a case study for this research. The study applies theoretical concepts of systems thinking and complexity to the real world, and tests the use of design as a social tool to engage multiple stakeholders in planning. In this research I acknowledge that places (and destinations) are socially constructed through people's interactions with their physical and social environments. This study explores a methodology that is explicit about the uncertainties of the destination’s system, and that helps to elicit knowledge and system trends. The collective design process used the creation of brand concepts, elements and strategies as instruments to directly engage stakeholders in the process of reflecting about their places and the issues related to tourism activity in the region. The methods applied included individual conversations and collaborative design sessions to elicit knowledge from local stakeholders. Concept maps were used to register and interpret information released throughout the process. An important aspect of the methodology was to bring together different stakeholder groups and translate the information into a common language that was understandable by all participants. This work helped release significant information as to what kind of tourism activity local stakeholders are prepared to receive and support. It also helped the emergence of a more unified regional identity. The outcomes delivered by the project (brand, communication material and strategies) were of high quality and in line with the desires and expectation of the local hosts. The process also reinforced local sense of pride, belonging and conservation. Furthermore, interaction between participants from different parts of the region triggered some self organising activity around the brand they created together. A major contribution of the present work is the articulation of an inclusive methodology to facilitate the involvement of locals into the decision-making process related to tourism planning. Of particular significance is the focus on the social construction of meaning in and through design, showing that design exercises can have significant social impact – not only on the final product, but also on the realities of the people involved in the creative process.

A sustainable approach to community based rehabilitation in rural and remote Australia

This paper presents a summary of an extensive review of the health, disability and rehabilitation literature conducted for the purposes of informing the formulation of a sustainable approach to community based rehabilitation in rural and remote Australia. It begins with a review of definitions of disability and rehabilitation, which is followed by differentiating 'rehabilitation in the community' and 'community based rehabilitation'. Finally, a network of community based rehabilitation coalitions is proposed as a sustainable approach to community based rehabilitation in rural and remote Australia. Each coalition would have a community rehabilitation facilitator and community specific database of resources, as well as a register of local community rehabilitation assistants who can support the work of health professionals by providing rehabilitation interventions under the latter's direction. In this approach, rehabilitation is conceptualised as being about people's lives rather than only a series of interventions provided by health care professionals. As such, rehabilitation becomes everybody's business.

The impact of rhetoric and reality on community anticipation of risk in the development of multi-purpose services (MPS) : A grounded theory study

better health service.Conclusion:This research provides an insight into the perceptions of the rhetoric and reality of community member involvement in the process of developing multi-purpose services. It revealed a grounded theory in which fear and trust were intrinsic to a process of changing from a traditional hospital service to the acceptance of a new model of health care provided at a multi-purpose service.

The role of academic community in higher learning : Alternatives to a drive-thru education

The purpose of our paper is to illustrate the fundamental importance of developing academic community among first year students. We argue that a sense of academic community is of fundamental importance in combating the effects of the neo-liberal economic discourse on higher education, and that the values of higher education are incongruent with those of economic rationalism. The discursive commodification of the student, and of education itself, works against the formation of community, both within the university environment and in the wider society. We argue that, at present, the dominant discourse shaping the social practice of higher education is that of neo-liberal economics. Community values stand in opposition to the dominant discourse, and are integral to the long-term survival of a socially critical and socially responsive society. We conclude that the importance of establishing a sense of academic community during the first year of university is justified by its ultimate value to society.

Redefining excellence : a strategic policy framework for community engagement and higher education

This report provides a current overview and analysis of the role of universities in local community development in the State of Victoria. Drawing on successful programs of community engagement in Victoria, Australia, Europe, Africa, and North America, the report proposes policy strategies for fostering community development for Victorian Higher Education through effective community engagement programs.